Chemical Solid Free-Form Fabrication: Making Shapes without Molds

Chemistry of Materials

Volumn 9, Issue 3, 1997, Pages 650-663

  Calvert, Paul ^a   Crockett, Robert ^a  

^a University of Arizona   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0000424918     PISSN: 08974756     EISSN: None     Source Type: Journal    
DOI: 10.1021/cm9604726     Document Type: Review

References (72)

1. Marcus, H. L., Beaman, J. J., Barlow, J. W., Bourel, D. L., Crawford, R., Eds. Solid Free-form Fabrication Symposium Proceedings; University of Texas at Austin: Austin, TX, 1990-1995.
2. Many sites can be found by searching rapid prototyping. See also The Rapid Prototyping Resource Center: http://cadserv. cadlab.vt.edu/bohn/RP.html.
3. Kodama, H. Rev. Sci. Instrum. 1981, 52, 1770-1773.
4. Jacobs, P. F. Rapid Prototyping and Manufacturing; SME: Dearborn, MI, 1992.
5. Neckers, D. C. CHEMTECH 1990, 615-619.
6. Pang, T. H. In Solid Free-form Fabrication Symposium Proceedings; University of Texas Press: Austin, TX, 1993; pp 11-26.
7. Torres-Filho, A., Neckers, D. C. Am. Chem. Soc. PMSE Div. Prepr. 1995, 72, 532-533.
8. Griffith, M. L., Chu, T.-M., Wagner, W., Halloran, J. W. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1995; pp 31-38.
9. Griffith, M. L., Halloran, J. W. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Barlow, J. W., Bourell, D. L., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1994; pp 396-403.
10. Charan, R., Renault, T., Ogale, A., Bagchi, A. Presented at the Fifth International Conference on Rapid Prototyping: Dayton, OH, 1994.
11. Ogale, A. A., Renault, T., Dooley, R. L., Bagchi, A., Jara-Almonte, C. C. SAMPE Q. 1991, 23, 28-38.
12. Nelson, J. C., Xue, S., Barlow, J. W., Beaman, J. J., Marcus, H. L., Bourell, D. L. Ind. Eng. Chem. Res. 1993, 32, 2305-2317.
13. Marcus, H. L., Beaman, J. J., Barlow, J. W., Bourell, D. L. Ceram. Bull. 1990, 69, 1030-1031.
14. Nelson, C., McAlea, K., Gray, D. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1995; pp 159-168.
15. Forderhase, P., McAlea, K., Michalewicz, M., Ganninger, M., Firestone, K. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1995; pp 102-109.
16. Agarwala, M., Bourell, D. L., Wu, B., Beaman, J. J. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1993; pp 193-203.
17. Vail, N. K., Barlow, J. W., Marcus, H. L. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1993; pp 204-214.
18. Badrinarayan, B., Barlow, J. W. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1995; pp 55-63.
19. Deckard, L., Claar, T. D. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J.; Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1993; pp 215-222.
20. Comb, J. W., Priedeman, W. R., Turley, P. W. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1994; pp 42-49.
21. Weeren, R. v., Agarwala, M. K., Jamalabad, V., Bandyopadhyay, A., Vaidyanathan, R., Langrana, N., Safari, A., Whalen, P., Danforth, S. C., Ballard, C. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1995; pp 314-321.
22. Agarwala, M. K., Weeren, R. v., Vaidyanathan, R., Bandyopadhyay, A., Jamalabad, V., Carrasquillo, G., Langrana, N., Safari, A., Garofalini, S. H., Danforth, S. C., Burlew, J., Donaldson, R., Whalen, P., Ballard, C. In Solid Free-form Fabrication; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1995; pp 1-8.
23. Sachs, E., Cima, M., Williams, P., Brancazio, D., Cornie, J. J. Eng. Ind. 1992, 114, 481-488.
24. Sachs, E., Allen, S., Cima, M., Wylonis, E., Guo, H. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1995; pp 448-467.
25. Cima, M. J., Yoo, J., Khanuja, S., Rynerson, M., Nammour, D., Giritlioglu, B., Grau, J., Sachs, E. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1995; pp 479-488.
26. Geiger, M., Steger, W., Greul, M., Sindel, M. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1994; pp 9-16.
27. Stuffle, K., Mulligan, A., Calvert, P., Lombardi, J. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J.; Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas, Austin, TX, 1993; pp 60-63.
28. Stuffle, K., Mulligan, A., Lombardi, J., Calvert, P., Fabes, B. Solid freebody forming of ceramics from polymerizable slurry. In Materials Research Society Symposium Proceedings: Better ceramics through chemistry VI; Cheetham, A. K., Ed.; MRS: Pittsburgh, PA, 1994; Vol. 346, pp 1027-1031.
29. Crockett, R. S., O'Kelly, J., Calvert, P. D., Fabes, B. D., Stuffle, K., Creegan, P., Hoffman, R. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas, Austin: Austin, TX, 1995; pp 17-24.
30. Schaffer, G. University of Queensland, personal communication.
31. Lombardi, J., George, G., Rintoul, L., Calvert, P. Polym. Prepr. 1996, 37 (1), 221-222.
32. Calvert, P., George, G., Rintoul, L. Chem. Mater. 1996, 8, 1298-1301.
33. Griffin, C., Daufenbach, J., McMillin, S. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1994; pp 17-24.
34. Cawley, J. D., Wei, P., Liu, Z. E., Newman, W. S., Mathhewson, B. B., Heuer, A. H. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1995; pp 9-16.
35. Feygin, M., Hsieh, B., Melkanoff, M. A. IFIP Trans. B (Applications Technol.) 1992, B-3, 457-464.
36. Keicher, D. M., Jellison, J. L., Schanwald, L. P., Romero, J. A., Abbott, D. H. In 27th International SAMPE Technical Conference; SAMPE: Albuquerque, NM, 1995; p 1029.
37. Hartmann, K., Krishnan, R., Merz, R., Neplotnik, G., Prinz, F. B., Schultz, L., Terk, M., Weiss, L. E. In IEEE International Conference on Robotics and Automation; IEEE Computing Society Press: San Diego, CA, 1994; pp 2890-2895.
38. Rothon, R. N. Particulate-Filled Polymer Composites; Wiley: New York, 1995.
39. Odian, G. G. Principles of Polymerization, 3rd ed.; Wiley: New York, 1991.
40. Lombardi, J. L. Reactive extrusion free-form fabrication. PhD Thesis, University of Arizona, Tucson, AZ, 1996.
41. Birmingham, B. R., Marcus, H. L. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1995; pp 389-396.
42. Lee, Y. L., Tompkins, J. V., Sanchez, J. M., Marcus, H. L. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1995; pp 433-439.
43. Maxwell, J., Pegna, J., Hill, E. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1995; pp 143-150.
44. Lehmann, O., Stuke, M. Mater. Lett. 1994, 21, 131.
45. Wallenberger, F. T. Science 1995, 267, 1274-1275.
46. Guess, T. R., Chambers, R. S. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1995; pp 134-142.
47. White, F. M. Fluid Mechanics; McGraw-Hill Book Co.: New York, 1986; p 305.
48. Middleman, S. Modeling Axisymmetric Flows; Academic Press: San Diego, 1995.
49. Scherer G. W. Viscous Sintering of Inorganic Gels. In Surface and Colloid Science; Matijevic, E., Ed.; Plenum Press: New York, 1987; Vol. 14, pp 265-300.
50. Reed, J. Introduction to the Principles of Ceramic Processing; John Wiley & Sons: New York, 1988
51. Karis, T. E., Kono, R.-N., Kim, G., Jhon, M. S., Davis, C. R. Presented at Society of Rheology, 6th Annual Meeting, Sacramento, CA, 1995.
52. Karis, T. E. J. Appl. Polym. Sci. 1996, 59, 1405-1416.
53. Gillham, J. K. Curing. Encyclopedia of Polymer Science and Engineering, 2nd ed.; John Wiley & Sons: New York, 1986; Vol. 4, pp 519-524.
54. Pintat, T., Sindel, M., Greul, M., Burblies, A., Wilkening, C. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Barlow, J. W., Bourell, D. L., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1994; pp 175-180.
55. Johanson, R., Kikuchi, N., Papalambros, P. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Barlow, J. W., Bourell, D. L., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1994; pp 293-298.
56. Gilman, C. R., Rock, S. J. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1995; p 213.
57. Marin, N., Crawford, R. H. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1995; p 468.
58. Levy, R. A., Guduri, S., Crawford, R. Am. J. Neuroradiol. 1994, 15, 473-477.
59. Burns, M. Automated Fabrication: Improving Productivity in Manufacturing; Prentice-Hall: New York, 1993.
60. Suh Y. S., Wozny, M. J. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Auistin, TX, 1995; p 337.
61. Dotenc, A., Makela, I. Comput. Aided Des. 1994, 26, 119-126.
62. Chalasani, K., Jones, L., Roscoe, L. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1995; p 229.
63. Allen S., Dutta, D. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Barlow, J. W., Bourell, D. L., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1994; pp 259-269.
64. Cima, M. J., Sachs, E., Cima, L. G., Yoo, J., Khanuja, S., Borland, S. W., Wu, B., Giordano, R. A. In Solid Free-form Fabrication Symposium Proceedings; Marcus, H. L., Beaman, J. J., Bourell, D. L., Barlow, J. W., Crawford, R. H., Eds.; University of Texas Press: Austin, TX, 1994; pp 181-190.
65. Karam, G. N., Gibson, L. J. Mater. Sci. Eng., C 1994, 2, 113-132.
66. Gibson, L. J., Ashby, M. F. Cellular Solids: Structure & Properties.; Pergamon Press: Oxford, 1988.
67. Wainwright, S. A., Biggs, W. D., Currey, J. D., Gosline, J. M. Mechanical Design in Organisms; Princeton University Press: Princeton, NJ, 1986.
68. NMAB Hierarchical Structures in Biology as a Guide for New Materials Technology; National Academy Press: Washington, DC, 1994.
69. McCord, M. A., Awschalom, D. D. Appl. Phys. Lett. 1990, 57, 2153-2155.
70. Sasano, K., Nakamura, K., Kaneto, K. Jpn. J. Appl. Phys. 1993, 32B, L863-865.
71. Rubel, S., Trochet, M., Ehrichs, E. E., Smith, W. F., Lozanne, A. L. d. J. Vac. Sci. Technol. B 1994, 12, 1894-1897.
72. Shinya, N., Konno, T., Egashira, M. SPIE Proc. 1996, 2722, 36-44.