Microwave assisted synthesis, crosslinking, and processing of polymeric materials

Advances in Polymer Science

Volumn 163, Issue , 2003, Pages 193-263

  Bogdal, Dariusz ^a   Penczek, Piotr ^b   Pielichowski, Jan ^a   Prociak, Aleksander ^a  

^a CRACOW UNIVERSITY OF TECHNOLOGY   (Poland)

^b INDUSTRIAL CHEMISTRY RESEARCH INSTITUTE   (Poland)

Author keywords

Composite; Microwave irradiation; Polymer cure; Polymer matrices; Polymerization

Indexed keywords

EPOXY RESIN; FREE RADICAL; ORGANIC COMPOUND; POLYAMIDE; POLYESTER; POLYETHER DERIVATIVE; POLYIMIDE; POLYMER; POLYURETHAN;

CHEMICAL ANALYSIS; CHEMICAL INTERACTION; CHEMICAL MODIFICATION; CROSS LINKING; HEAT TREATMENT; MATERIALS TESTING; MICROWAVE ASSISTED POLYMER SYNTHESIS; MICROWAVE RADIATION; POLYMERIZATION; PROCESS MONITORING; REACTION ANALYSIS; RECYCLING; REVIEW; SYNTHESIS; TIME;

EID: 0141988784     PISSN: 00653195     EISSN: None     Source Type: Book Series    
DOI: 10.1007/b11051     Document Type: Review

References (150)

1. Wei JB, Shidaker T, Hawley MC (1996) Trends Polym Sci (TRIP) 4:18
2. Parodi F (1999) Microwave heating and the acceleration of polymerization processes. In: Wlochowicz A (ed) Polymers and liquid crystals. Proceedings of SPIE - The International Society for Optical Engineering, vol 4017, p 2
3. Thostenson ET, Chou T-W (1999) Composites A 30:1055
4. Mijovic J, Wijaya J (1990) Polym Compos 11:191
5. Jacob J, Chia LHL, Boey FYC (1995) J Mater Sci 30:5321
6. Metaxas AC, Meredith RJ (1983) Industrial microwave heating. Peter Perigrinus, London
7. Mingos DMP, Baghurst DR (1997) Applications of microwave dielectric heating effects to synthetic problems in chemistry. In: Kingston HM, Haswell SJ (eds) Microwave-enhanced chemistry fundamentals, sample preparation, and applications (1997). American Chemical Society
8. Mingos DMP, Baghurst DR (1991) Chem Soc Rev 20:1
9. Gabriel C, Gabriel S, Grant EH, Halstread BS, Mingos DMP (1998) Chem Soc Rev 27:213
10. Parodi F (1996) Physics and chemistry of microwave processing. In: Agarwal SL, Russo S (eds) Comprehensive polymer science, 2nd supplement volume. Pergamon-Elsevier, Oxford
11. Abramovitch RA (1991) Org Prep Proc Int 23:683
12. Strauss CR, Trainor RW (1995) Aust J Chem 48:1665
13. Caddick S (1995) Tetrahedron 51:10,403
14. Loupy A, Petit A, Hamelin J, Texier-Boullet F, Jacquault P, Mathe D (1998) Synthesis 1213
15. Varma RS (1999) Green Chem 1:43
16. Bogdal D (1999) Wiad Chem 53:66
17. Lidstrom P, Tierney J, Wathey B, Westamn J (2001) Tetrahedron 57:9225
18. Perreux L, Loupy A (2001) Tetrahedron 57:2001
19. Commission on Engineering and Technical Systems (1994) Microwave processing of materials. Commission on Engineering and Technical Systems. National Academy Press, Washington DC
20. CEM Corporation homepage: http://www.cemsynthesis.com
21. Lambda Technologies, Inc. Homepage: http://www.microcure.com
22. Milestone, Inc. Homepage: http://www.milestonesci.com
23. PersonalChemistry AB. Homepage: http://www.personalchemistry.com
24. Plazmatronika SA. Homepage: http://www.plazmatronika.pl
25. Walter PJ, Chale S, Kingston HM (1997) Overview in microwave assisted sample preparation. In: Kingston HM, Haswell SJ (eds) Microwave-enhanced chemistry. Fundamentals, sample preparation, and applications. American Chemical Society
26. Bose AK, Manhas MS, Ganguly SN, Sharma AH, Banik BK, Bimal K (2002) Synthesis 11
27. Morcuende A, Valverde S, Harradon B (1994) Synlett 89
28. Gedye RN, Smith FE, Westaway KC (1988) Can J Chem 66:17
29. Giguere RJ, Bray TL, Duncan SM, Majetich G (1986) Tetrahedron Lett 27:4945
30. Majetich G, Hicks R (1995) Radiat Phys Chem 45:567
31. Bram G, Loupy A, Villemin D (1992) In: Smith K (ed) Solid supports and catalysts in organic chemistry. Ellis Harwood, London
32. Laszlo P (ed) (1987) Preparative chemistry using supported reagents. Academic Press, New York
33. Teffal M, Gourdenne A, (1983) Eur Polym J 19:543
34. Palacios J, Sierra M, Rodriguez P (1992) New Polym Mater 3:273
35. Chia LHL, Jacob J, Boey FYC (1995) J Mat Proc Techn 48:445
36. Jacob J, Chia LHL, Boey FYC (1997) J Appl Polym Sci 63:787
37. Albert P, Holderle M, Mulhaupt R, Janda R (1996) Acta Polym 47:74
38. Chia LHL, Jacob J, Boey FYC (1996) J Polym Sci A Polym Chem 34:2087
39. Palacios J, Velverde C (1996) New Polym Mat 5:93
40. Correa R, Gonzalez G, Dougar V (1998) Polymer 39:1471
41. Zhang G, Niu A, Peng S, Jiang M, Tu Y, Li M, Wu CH (2001) Accounts Chem Res 34:249
42. Zhang W, Gao J, Wu Ch (1997) Macromolecules 30:6388
43. Chen Y, Wang J, Zhang D, Cai R, Yu H, Su Ch, Huang Z-E (2000) Polymer 41:7877
44. Lu J, Zhu X, Ji S, Zhu J, Chen Z (1998) J Appl Polym Sci 68:1563
45. Lu J, Zhu X, Zhu J, Yu J (1997) J Appl Polym Sci 66:129
46. Lu J, Jiang Q, Zhu J, Wang F (2001) J Appl Polym Sci 79:312
47. Sundararajan G, Dhanalakshmi K (1997) Polym Bull 39:333
48. O'Brien WJ (1989) Dental materials properties and application. Quintessence Publishing, Chicago
49. Nishii M, (1968) J Osaka Dent Univ 2:23
50. Kimura H, Teraoka F (1984) Quintessence Dent Tech 9:547
51. Kimura H (1984) Osaka Dent Univ 24:21
52. Reitz PV, Sanders JL, Levin B (1985) Phys Prop Quint Int 8:547
53. Levin B, Sander JL, Reitz PV (1989) J. Prosthet Dent 61:381
54. Al Doori A, Hugget R, Bates JF, Brooks SC (1988) Dent Mater 4:25
55. Muhtarogullari IY, Dogan A, Muhtarogullari M, Usanmaz A (1999) J Appl Polym Sci 74:2971
56. Blagojevic A, Murphy VM (1999) J Oral Rehabil 26:804
57. Teraoka F, Takahashi J (2000) J Prosthet Dent 83:514
58. Urabe H, Nomura Y, Shirai K, Yoshioka M, Shintani H (1999) J Oral Rehabil 26:442
59. Ruyter IE, Oysaed H (1987) J Biomed Mater Res 21:11
60. Truong VT, Thomas FGV (1988) Aust Dent J 33:201
61. Thomas CJ, Webb BC (1995) Eur J Prosthodont Restor Dent 3:179
62. Polyzois GL, Handel RW, Stafford GD (1995) Eur J Prosthodont Restor Dent 3:183
63. Yunus N, Harrison A, Huggett R (1994) J Oral Rehabil 21:641
64. May KB, Shotwell JR, Koran A III, Wang R-F (1996) J Prosthet Dent 76:581
65. Bayasan A, Parker S, Wright PS (1998) J Prosthet Dent 79:182
66. Lewis DA, Summers JD, Ward TC, McGrath JE (1992) J Polym Sci A Polym Chem 30:1647
67. Imai Y (1996) A new facile and rapid synthesis of polyamides and polyimides by microwave assisted polycondensation. In: Hendrick JL, Labadie JW (eds) Step-growth polymers for high performance materials: new synthetic methods. ACS, p 421
68. Imai Y, Nemoto H, Watanabe S, Kakimoto M (1996) Polym J 28:256
69. Imai Y, Nemoto H, Kakimoto M (1996) J Polym Sci A Polym Chem 34:701
70. Imai Y (1996) React Funct Polym 30:3
71. Imai Y (1999) Adv Polym Sci 140:1
72. Park KH, Watanabe S, Kakimoto M, Imai Y (1993) Polym J 25:209
73. Chen J, Chen Q, Yu X (1996) J Appl Polym Sci 62:2135
74. Pourjavadi A, Zamanalu MR, Zohurian-Mehr MI (1999) Angew Makromol Chem 269:54
75. Mallakpour SE, Hajipour AR, Faghihi K (2001) Eur Polym J 37:119
76. Mallakpour SE, Hajipour AR, Zamanlou MR (2001) J Polym Sci A Polym Chem 39:177
77. Mallakpour SE, Hajipour AR, Faghihi K (2000) Polym Int 49:1388
78. Mallakpour SE, Hajipour AR, Khoee S (2000) J Appl Polym Sci 77:3003
79. Mallakpour SE, Hajipour AR, Khoee S (2000) J Polym Sci A Polym Chem 38:1154
80. Liu Y, Sun XD, Xie XQ, Scola DA (1998) J Polym Sci A Polym Chem 36:2653
81. Liu Y, Xiao Y, Sun X, Scola DA (1999) J Appl Polym Sci 73:2391
82. Fang X, Hutcheon R, Scola DA (2000) J Polym Sci A Polym Chem 38:2526
83. Fang X, Scola DA (1999) J Polym Sci A Polym Chem 37:4616
84. Fang X, Hutcheon R, Scola DA (2000) J Polym Sci A Polym Chem 38:1379
85. Hurduc N, Abdelylah D, Buisine JM, Decock P, Surpateanu G (1997) Eur Polym J 33:187
86. Chatti S, Bortolussi M, Loupy A, Blais JC, Bogdal D, Majdoub M (2002) Eur Polym J 38:1851
87. Chatti S, Bortolussi M, Loupy A, Blais JC, Bogdal D, Roger P (2003) J Appl Polym Sci (accepted)
88. Fleche G, Huchette M (1986) Starch 38:26
89. Mallon FK, Ray WH (1998) J Appl Polym Sci 69:1203
90. Keki S, Bodnar I, Borda J, Deak G, Zsuga M (2001) Macromol Rapid Commun 22:1063
91. Hottong U, Wei J, Dhulipala R, Hawley MC (1991) Proc 93rd Annu Meeting AmerCeramic Soc, p 587
92. Johnson MS, Rudd CD, Hill DJ (1998) Composites A 29A:71
93. Hill DJ, Rudd CD, Johnson MS (1998) J Microwave Power Electromagn Energy 33:216
94. Williams NH (1967) J Microwave Power 2:123
95. Beldjoudi N, Gourdenne A (1988) Eur Polym J 24:53
96. Baziard Y, Gourdenne A (1988) Eur Polym J 24:873
97. Lewis DA, Hedrick JC, McGrath JE, Ward TC (1987) Polym Prepr 28:330
98. Beldjoudi N, Gourdenne A (1988) Eur Polym J 24:265
99. Thuillier FM, Jullien H (1989) Makromol Chem Macromol Symp 25:63
100. Jow J, DeLong JD, Hawley MC (1989) SAMPE Quart 20:46
101. Levita G, Livi A, Rolla PA, Culicchi C (1996) J Polym Sci B Polym Phys 34:2731
102. Casalini R, Corezzi S, Livi A, Levita G, Rolla PA (1997) J Appl Polym Sci 65:17
103. Marand E, Baker HR, Graybeal JD (1992) Macromolecules 25:2243
104. Delmotte M, Jullien H, Ollivon M (1991) Eur Polym J 27:371
105. Forysth A, Whittaker AK (1999) J Appl Polym Sci 74:2917
106. Wei J, Hawley MC, DeLong JD (1993) Polym Eng Sci 33:1132
107. Jordan C, Galy J, Pascault J-P (1995) Polym Eng Sci 35:233
108. Hedreul C, Galy J, Dupuy J, Delmotte M, More C (1998) J Appl Polym Sci 68:543
109. Mijovic J, Corso WV, Nicolais L, d'Ambrosio G (1998) Polym Adv Technol 9:231
110. Mijovic J, Fishbain A, Wijaya J (1992) Macromolecules 25:986
111. Boey FYC, Yap BH, Chia L (1999) Polym Test 18:93
112. Boey FYC, Rath SK (2000) Adv Polym Techn 19:194
113. Thostenson ET, Chou T-W (1997) Proceedings of the 12th Annual Meeting of the American Society of Composites, Dearborn, p 931
114. Thostenson ET, Chou T-W (1998) Proceedings of the 13th Annual Meeting of the American Society of Composites, Baltimore
115. Thostenson ET, Chou T-W (2001) Polym Compos 22:197
116. Shull PJ, Hurley DH, Spicer JWM, Spicer JB (2000) Polym Eng Sci 40:1157
117. Bogdal D, Pielichowski J, Penczek P, Gorczyk J, Kowalski G (2002) Polimery 48:842
118. Bryan E (1994) Chemistry and technology of epoxy resins. Chapman and Hall, London
119. Palumbo M, Tempesti E (1998) Acta Polym 49:482
120. Jullien H, Valot H (1985) Polymer 26:506
121. Silinski B, Kuzmycz C, Gourdenne A (1987) Eur Polym J 23:273
122. Parodi F, Belgiovine C, Zannoni C (1994) US Patent 5,288,833
123. Parodi F, Gerbelli R, De Meuse M (1996) US Patent 5,489,664
124. Hurduc N, Buisine J-M, Decock P, Talewee J, Surpateneau G (1996) Polym J 28:550
125. Huy HT, Buu TN, Dung TTK, Han TN, Qaung PV (1996) J Mater Sci Pure Appl Chem A33:1957
126. Satge C, Verneuil B, Branland P, Granet R, Krausz P, Rozier J, Petit C (2002) Carbohydr Polymers 49:373
127. Mallakpour SE, Hajipour AR, Mahdavian AR, Zadhoush A, Ali-Hosseini F (2001) Eur Polym J 37:1199
128. Merrifield RB (1985) Angew Chem Int Ed 24:799
129. Lew A, Krutzik PO, Hart ME, Chamberlin AR (2002) J Comb Chem 4:95
130. Kappe CO (2002) Curr Opin Chem Biol 6:314
131. Yu HM, Chen ST, Wang KT (1992) J Org Chem 57:4781
132. Larhed M, Lindeberg G, Hallberg A (1996) Tetrahedron Lett 37:8219
133. Hoel AM, Nielsen J (1999) Tetrahedron Lett 40:3941
134. Kustner GJ, Scheeren HW (2000) Tetrahedron Lett 41:515
135. Kumar HMS, Anjaneyulu S, Reddy BVS, Yadav JS (2000) Synlett 1129
136. Stadler A, Kappe CO (2001) Tetrahedron 57:3915
137. Strohmeier GA, Kappe CO (2002) J Comb Chem 4:154
138. Vanden Eynde JJ, Rutot D (1999) Tetrahedron 55:2687
139. Chabinsky IJ (1983) Elastomerics 115:17
140. Krieger B (1992) Polym. Mat. Sci. Eng. 66:339
141. Parodi F. Technical Brochure. http://www.fpchem.com/fap_6a2-en.html
142. Krzan A (1998) J Appl Polym Sci 69:1115
143. Krzan A (1999) Polym Adv Technol 10:603
144. Klun U, Krzan A (2000) Polymer 41:4361
145. Kathirgamanathan P (1993) Polymer 34:3105
146. Epstein AJ, MacDiarmid AG (1991) In: Salaneck WR, Clark DT (eds) Science and application of conducting polymers. Adam Hilger, London
147. Thostenson ET, Chou T-W (1999) Advances in aerospace materials and structures, Newaz G (ed), ASME (AD-Vol. 58) New York, p 89
148. Wu C-Y, Benatar A (1997) Polym Eng Sci 37:738
149. Ku HS, MacRobert M, Siores E, Ball JAR (2000) Plast Rubber Compos 29:278
150. Ku HS, Siu F, Siores E, Ball JAR, Blickblau AS (2001) J Mater Process Tech 113:184