Fretting fatigue crack nucleation in Ti-6Al-4V

Fatigue and Fracture of Engineering Materials and Structures

Volumn 26, Issue 3, 2003, Pages 199-214

  Wallace, J M ^a   Neu, R W ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Contact pressure; Fretting fatigue; Frictional force; Kitagawa Takahashi diagram; Plastic strain ratchetting; Ti 6Al 4V

Indexed keywords

CRACKS; FRICTION; MICROSTRUCTURE; NUCLEATION; PLASTIC DEFORMATION; STRAIN; STRESS ANALYSIS;

FRETTING FATIGUE;

TITANIUM ALLOYS;

EID: 0037373045     PISSN: 8756758X     EISSN: None     Source Type: Journal    
DOI: 10.1046/j.1460-2695.2003.00553.x     Document Type: Article

References (59)

1. McDowell, J. R. (1953) Fretting corrosion. STP 144, American Society for Testing and Materials, Philadelphia, pp. 24-39.
2. Larsen, J. M., Worth, B. D., Annis, C. G. Jr. and Haake, F. K. (1996) An assessment of the role of near-threshold crack growth in high-cycle-fatigue life prediction of aerospace titanium alloys under turbine engine spectra. Int. J. Fract. 80, 237-255.
3. Waterhouse, R. B. (1992) Fretting Fatigue. Int. Mater. Rev. 37, 77-97.
4. Hills, D. A. and Nowell, D. (1994) Mechanics of Fretting Fatigue, Kluwer. Academic Publishers, Dordrecht.
5. Waterhouse, R. B. and Lindley, T. C., Eds. (1994) Fretting Fatigue, ESIS 18. Mechanical Engineering Publications, London.
6. Fouvry, S., Kapsa, Ph, Vincent, L. and Dang Van, K. (1996) Theoretical analysis of fatigue under dry friction for fretting loading conditions, Wear 195, 21-34.
7. Lindley, T. C. (1997) Fretting fatigue in engineering alloys. Int. J. Fatigue 19, S39-S49.
8. Attia, M. H. and Waterhouse, R. B., Eds. (1992) Standardization of Fretting Fatigue Test Methods and Equipment, ASTM STP 1159, American Society for Testing and Materials, Philadelphia.
9. Nowell, D., Hills, D. A. and Moobola, R. (2000) Length scale considerations in fretting fatigue. In: Fretting Fatigue: current Technology and Practices, ASTM STP 1367 (Edited by D. W. Hoeppner, V. Chandrasekaran and C. B. Elliott). American Society for Testing and Materials/title〉., West Conshohocken, PA, pp. 141-153.
10. Neu, R. W., Pape, J. A. and Swalla, D. R. (2000) Methodologies for linking nucleation and propagation approaches for predicting life under fretting fatigue. In: Fretting Fatigue: current Technology and Practices, ASTM STP 1367 (Edited by D. W. Hoeppner, V. Chandrasekaran and C. B. Elliott). American Society for Testing and Materials, West Conshohocken, PA, pp. 369-388.
11. Donachie, M. J. (1988) Titanium: A Technical Guide, ASM International, Metals Park, Ohio, USA.
12. Goh, C. H., Wallace, J. M., Neu, R. W and McDowell, D. L. (2001) Polycrystal plasticity simulations of fretting fatigue. Int. J. Fatigue 23, S423-S435.
13. Goh, C. H., Wallace, J. M., Neu, R. W. and McDowell, D. L. (2000) Computational crystal plasticity applied to attachment fatigue problems. In: Proceedings of the 5th National Turbine Engine High Cycle Fatigue (HCF) Conference, Chandler, Arizona, USA. (on CD).
14. Goh, C. H., Neu, R. W. and McDowell, D. L. (2001) Shakedown, ratchetting, and reversed cyclic plasticity in fretting fatigue of Ti-6Al-4V based on polycrystal plasticity simulations. In: Proceedings of the 6th National Turbine Engine High Cycle Fatigue (HCF) Conference, Jacksonville, Florida, USA. (on CD).
15. Gallagher, J. P. Eds. (2001) Improved High Cycle Fatigue (HCF) Life Prediction. Final Report. UDRI Report no. UDR-TR-1999-00079, U.S. Air Force Contract no. F33615-96-5269.
16. Hines, J. A, Peters, J. O. and Lutjering, G. (1999) Microcrack propagation in Ti-6Al-4V alloys. In: Fatigue Behavior of Titanium Alloys (Edited by R. R. Boyer, D. Eylon, J. P. Gallagher, G. L. Tjering). TMS, Warrendale, PA, pp. 15-22.
17. Campbell, J. P. and Ritchie, R. O. (1999) Mixed-mode fatigue-crack growth thresholds in Ti-6Al-4V at high frequency. Seripta Mater. 41, 1067-1071.
18. Ritchie, R. O, Boyce, B. L., Campbell, J. P., et al. (1999) Thresholds for high-cycle fatigue in a turbine engine Ti-6Al-4V alloy. Int. J. Fatigue 21, 653-662.
19. Ritchie, R. O., Davidson, D. L., Boyce, B. L., et al. (1999) High-cycle fatigue of Ti-6Al-4V. Fatigue Fract. Engng Mater Struct. 22, 621-631.
20. Campbell, J. P. and Ritchie, R. O. (2000) Mixed-mode, high-cycle fatigue-crack growth thresholds in Ti-6Al-4V: part I a comparison of large- and short-crack behavior. Engng Fracture Mech. 67, 209-227.
21. Peters, J. O., Roder, O., Boyce, B. L., et al. (2000) Role of foreign-object damage on thresholds for high-cycle fatigue in Ti-6Al-4V. Metall. Mater. Trans. 31A, 1571-1583.
22. Peters, J. O. and Ritchie, R. O. (2000) Influence of foreign-object damage on crack initiation and early crack growth during high-cycle fatigue of Ti-6Al-4V. Engng Fracture Mech. 67, 193-207.
23. Iyer, K. and Mall, S. (2000) Effects of cyclic frequency and contact pressure on fretting fatigue under two-level block loading. Fatigue Fract. Engng Mater. Struct. 23, 335-346.
24. Cortez, R., Mall, S. and Calcaterra, J. R. (2000) Interaction of high-cycle and low-cycle fatigue on fretting behavior of Ti-6-4. In: Fretting Fatigue: Current Technology and Practices, ASTM STP 1367 (Edited by D. W. Hoeppner, V. Chandrasekaran and C. B. Elliott). American Society for Testing and Materials, West Conshohocken, PA, pp. 183-198.
25. Eylon, D. (1998) Summary of the Available Information on the Processing of the Ti-6Al-4V HCF/LCF Program Plates. University of Damon Report. University of Dayton, Dayton, Ohio, USA.
26. Pape, J. A. and Neu, R. W. (1999) Influence of contact configuration in fretting fatigue testing. Wear 225, 1205-1214.
27. Wallace, J. M. (2000) Fretting fatigue crack nucleation in Ti-6Al-4V. MS Thesis, Georgia Institute of Technology; Atlanta, GA, USA.
28. Goss, G. L. and Hoeppner, D. W. (1974) Normal load effects in fretting fatigue of titanium and aluminum alloys. Wear 27, 153-159.
29. Lutynski, C., Simansky, G. and McEvily, A. J. (1982) Fretting fatigue of Ti-6Al-4V alloy. In: Materials Evaluation Under Fretting Conditions, ASTM STP 780 (Edited by. S. R. Brown). American Society for Testing and Materials, Philadelphia, pp. 150-164.
30. Nakazawa, K., Sumita, M. and Maruyama, N. (1992) Effect of contact pressure on fretting fatigue of high strength steel and titanium alloy. In: Standardization of Fretting Fatigue Test Methods and Equipment, ASTM STP 1159 (Edited by M. H. Attia and R. B. Waterhouse). American Society for Testing and Materials, Philadelphia, pp. 115-125.
31. Hutson, A. and Nicholas, T. (1999) Fretting fatigue of Ti-6Al-4V under flat-on-flat contact. Int. J. Fatigue 21, 663-670.
32. Szolwinski, M. P. and Farris, T. N. (1998) Observation, analysis and prediction of fretting fatigue in 2024-T351 aluminum. Wear 221, 24-36.
33. Farrow, L. H., Werner, D. Pearson, D. D., et al. (2000) Fretting fatigue testing methodology incorporating independent slip and fatigue stress control. In: Fretting Fatigue: Current Technology and Practices, ASTM STP 1367 (Edited by D.W. Hoeppner, V. Chandrasekaran and C. B. Elliott). American Society for Testing and Materials, West Conshohocken, PA, pp. 391-403.
34. Vingsbo, O. and Soderberg, S. (1988) On fretting maps. Wear 126, 131-147.
35. Waterhouse, R. B. (1977) The role of adhesion and delamination in the fretting wear of metallic materials. Wear 45, 355-364.
36. Fayeulle, S., Blanchard, P. and Vincent, L. (1993) Fretting behavior of titanium alloys. Trib. Trans. 36, 267-275.
37. Fouvry, S, Kapsa, P. and Vincent, L. (2000) A multiaxial fatigue analysis of fretting contact taking into account the size effect. In: Fretting Fatigue: Current Technology and Practices, ASTM STP 1367 (Edited by D. W. Hoeppner, V. Chandrasekaran and C. B. Elliott). American Society for Testing and Materials, West Conshohocken, PA, pp. 167-182.
38. Anton, D. L., Guillemette, R., Reynolds, J. and Lutian, M. (1997) Fretting fatigue damage analysis in Ti-6Al-4V. In: Surface Performance of Titanium (Edited by J. K. Gregory, H. J. Rack and D. Eylon). TMS, Warrendale, PA, pp. 187-198.
39. Antoniou, R. A. and Radtke, T. C. (1997) Mechanisms of fretting fatigue of titanium alloys. Mater. Sci. Engng A237, 229-240.
40. Sauger, E., Fouvry, S., Ponsonnet, L., et al. (2000) Tribologically transformed structure in fretting. Wear 245, 39-52.
41. Kapoor, A. (1994) A re-evaluation of the life to rupture of ductile metals by cyclic plastic strain. Fatigue Fract. Engng Mater. Struct. 17, 201-219.
42. Ringsberg, J. W., Loo-Morrey, M., Josefson, B. L., et al. (2000) Prediction of fatigue crack initiation for rolling contact fatigue. Int. J. Fatigue 22, 205-215.
43. Wharton, M. H., Taylor, D. E. and Waterhouse, R. B. (1973) Metallurgical factors in the fretting-fatigue behaviour of 70/30 brass and 0.7% carbon steel. Wear 23, 251-260.
44. Pape, J. A. and Neu, R. W. (2001) Fretting fatigue damage accumulation in PH 13-8 Mo stainless steel. Int. J. Fatigue 23, S437-S444.
45. Kitagawa, H. and Takahashi, S. (1976) Applicability of fracture mechanics to very small cracks or the cracks in the early stage. In: Proceedings of the Second International Conference on Mechanical Behavior of Materials, ASM, Metals Park, Ohio, USA, pp. 627-631.
46. El Haddad, M. H., Topper, T. H. and Smith, K. N. (1979) Prediction of non-propagating cracks. Engng Fracture Mech. 11, 573-584.
47. Newman, J. C. and Raju, I. S. (1981) An empirical stress-intensity factor equation for the surface crack. Engng Fract. Mech. 15, 185-192.
48. Satoh, T. and Mutoh, Y. (1994) Effect of contact pressure on fretting fatigue crack growth behaviour at elevated temperature. In: Fretting Fatigue, ESIS 18 (Edited by R. B. Waterhouse and T. C. Lindley), Mechanical Engineering Publications, London, pp. 405-416.
49. Hoeppner, D. W. and Goss, G. L. (1974) A fretting-fatigue damage threshold concept. Wear 27, 61-70.
50. Endo, K. and Goto, H. (1976) Initiation and propagation of fretting fatigue cracks. Wear 38, 311-324.
51. Nix, K. J. and Lindley, T. C. (1985) The application of fracture mechanics to fretting fatigue. Fatigue Fract. Engng Mater. Struct. 8, 143-160.
52. Sato, K., Fujii, H. and Kodama, S. (1986) Effects of stress ratio and fretting fatigue cycles on the accumulation of fretting fatigue damage to carbon steel S45C. Bull. JSME 29, 2759-2764.
53. Adibnazari, S. and Hoeppner, D. W. (1992) Characteristics of the fretting fatigue damage threshold. Wear 159, 43-46.
54. Hudak, S. J. Jr., Chan, K. S., McClung, R. C., et al. (1999) High Cycle Fatigue of Turbine Engine Materials, Final Technical Report, UDRI Subcontract no. RI 40098X, Southwest. Research Institute, San Antonio, Texas.
55. Miller, K. J. (1984) Initiation and growth rates of short cracks. In: Proceedings of the IUTAM Eshelby Memorial Conference (Edited by B. A. Bilby, K.J. Miller and J. R. Willis), Cambridge University Press, Cambridge, pp. 477-500.
56. Miller, K. J. (1997) The three thresholds for fatigue crack propagation. In: Fatigue and Fracture Mechanics, 27th Volume, ASTM STP 1296 (Edited by R. S. Piascik, J. C. Newman and N. E. Dowling). American Society for Testing and Materials, pp. 267-286.
57. Miller, K. J. and O'Donnell, W. J. (1999) The fatigue limit and its elimination. Fatigue Fract. Engng Mater. Struct. 22, 545-557.
58. Fouvry, S., Ph, Kapsa, F. and Vincent, L. (1998) Identification of the characteristic length scale for fatigue cracking in fretting contacts. J. de Physique IV France 8, Pr8-159-Pr8-166.
59. Araujo, J. A. and Nowell, D. (1999) Analysis of pad size effects in fretting fatigue using short crack arrest methodologies. Int. J. Fatigue 21, 947-956.