Stability and bone preservation in custom designed revision hip stems

Clinical Orthopaedics and Related Research

Volumn 373, Issue , 2000, Pages 164-173

  Walker, Peter S ^a   Culligan, Simon G ^b   Hua, Jia ^b   Muirhead Allwood, Sarah K ^b   Bentley, George ^a  

^a UNIVERSITY COLLEGE LONDON   (United Kingdom)

^b NONE

Author keywords

[No Author keywords available]

Indexed keywords

HYDROXYAPATITE;

BONE DENSITY; CONFERENCE PAPER; FINITE ELEMENT ANALYSIS; GEOMETRY; HIP DISEASE; HIP PROSTHESIS; HUMAN; MAJOR CLINICAL STUDY; MODEL; PRIORITY JOURNAL; TOTAL HIP PROSTHESIS;

EID: 0033997028     PISSN: 0009921X     EISSN: 15281132     Source Type: Journal    
DOI: 10.1097/00003086-200004000-00020     Document Type: Conference Paper

References (55)

1. Aranjo C, Gonzalez JF, Tonino A: Rheumatoid arthritis and hydroxyapatite-coated hip prostheses. J Arthroplasty 13:660-667, 1998.
2. Ashman RB, Cowin SC, Van Buskirk WC, Rice JC: A continuous wave technique for the measurement of the elastic properties of cortical bone. J Biomech 17:349-361, 1984.
3. Bargar WL, Murzic WJ, Taylor JK, Newman MA, Paul HA: Management of bone loss in revision total hip arthroplasty using custom cementless femoral components. J Arthroplasty 8:245-252, 1993.
4. Bergmann G, Graichen F, Rohlmann A: Hip joint loading during walking and running measured in two patients. J Biomech 26:969-990, 1993.
5. Cameron HU: The 3-6-year results of a modular noncemented low-bending stiffness hip implant. J Arthroplasty 8:239-243, 1993.
6. Chandler HP, Ayres DK, Tan RC, Anderson LC, Varma AK: Revision total hip replacement using the S-Rom femoral component. Clin Orthop 319:130-140, 1995.
7. Dohmae Y, Bechtold JE, Sherman RE, Puno RM, Gustilo RB: Reduction in cement-bone interface shear strength between primary and revision arthroplasty. Clin Orthop 236:214-220, 1988.
8. Dorr LD, Lewonowski K, Lucero M, et al: Failure mechanisms of Anatomic Porous Replacement I cementless total hip replacement. Clin Orthop 334:157-167, 1997.
9. Dorr LD, Wan Z: Comparative results of a distal modular sleeve, circumferential coating, and stiffness relief using the Anatomic Porous Replacement II. J Arthroplasty 11:419-428, 1996.
10. Duda GN, Heller M, Albringer J, et al: Influence of muscle forces on femoral strain distribution. J Biomech 31:841-846, 1998.
11. Egan KJ, Di Cesare PE: Intraoperative complications of revision hip arthroplasty using a fully porous-coated straight cobalt-chrome femoral stem. J Arthroplasty 10:45-51, 1995.
12. Fetto JF, Bettinger P, Austin K: Reexamination of hip biomechanics during unilateral stance. Am J Orthop: 605-612, August 1995.
13. Finlay JB, Rorabeck CH, Bourne RB, Tew WM: In vitro analysis of proximal femoral strains using PCA femoral implants and a hip-abductor muscle simulator. J Arthroplasty 4:335-345, 1989.
14. Franzén H, Toksvig-Larsen S, Lidgren L, Önnerfält R: Early migration of femoral components revised with impacted cancellous allografts and cement. J Bone Joint Surg 778:862-864, 1995.
15. Geesink RGT, Hoefnagels NHM: Six-year results of hydroxyapatite-coated total hip replacement. J Bone Joint Surg 77B:534-547, 1995.
16. Gie GA, Linder L, Ling RSM, et al: Impacted cancellous allografts and cement for revision total hip arthroplasty. J Bone Joint Surg 75B:14-21, 1993.
17. Hua J, Walker PS: Closeness of fit of uncemented stems improves the strain distribution in the femur. J Orthop Res 13:339-346, 1995.
18. Hua J, Walker PS, Muirhead-Allwood W, Bentley G, McCullough CJ: The rationale for CAD-CAM uncemented custom hips: An interim assessment. Hip Int 5:52-62, 1995.
19. Huiskes R, Weinans H, Dalstra M: Adaptive bone remodelling and biomechanical design considerations for non-cemented total hip arthroplasty. Orthopedics 12:1255-1267, 1989.
20. Hussamy O, Chir B, Lachiewicz PF: Revision total hip arthroplasty with BIAS femoral component. J Bone Joint Surg 76A:1137-1148, 1994.
21. Izquierdo RJ, Northmore-Ball MD: Long-term results of revision hip arthroplasty. J Bone Joint Surg 76B:34-39, 1994.
22. Kärrholm J, Malchau H, Snorrason F, Herberts P: Micromotion of femoral stems in total hip arthroplasty. J Bone Joint Surg 76A:1692-1705, 1994.
23. Kavanagh BF, Ilstrup D M, Fitzgerald RH: Revision total hip arthroplasty. J Bone Joint Surg 67A:517-526, 1985.
24. Kendrick JB, Noble PC, Tullos HS: Distal stem design and the torsional stability of cementless femoral stems. J Arthroplasty 10:463-469, 1995.
25. Krögger H, Veneswaa P, Jurvelin J, et al: Bone density at the proximal femur after total hip arthroplasty. Clin Orthop 352:66-74, 1998.
26. Kronick JL, Barba ML, Paprosky WG: Extensively coated femoral components in young patients. Clin Orthop 344:263-274, 1997.
27. Kuiper JH, Huiskes R: Friction and stem stiffness affect dynamic interface motion in total hip replacement. J Orthop Res 14:36-43, 1996.
28. Lawrence JM, Engh CA, Macalino GE, Lauro GR: Outcome of revision hip arthroplasty done without cement. J Bone Joint Surg 76A:965-973, 1994.
29. Malkani AL, Lewallen DG, Cabanela ME, Wallrichs SL: Femoral component revision using an uncemented, proximally coated, long-stem prosthesis. J Arthroplasty 11:411-418, 1996.
30. Markolf KL, Amstutz HC, Hirschowitz DL: The effect of calcar contact on femoral component mircomotion. J Bone Joint Surg 62A:1315-1323, 1980.
31. Meding JB, Ritter MA, Keating EM, Paris PM: Clinical and radiographic evaluation of long-stem femoral components following revision total hip arthroplasty. J Arthroplasty 9:399-408, 1994.
32. Meding JB, Ritter MA, Keating EM, Faris PM: Comparison of collared and collarless femoral components in primary uncemented total hip arthroplasty. J Arthroplasty 12:273-280, 1997.
33. Meding JB, Ritter MA, Keating EM, Faris PM: Impaction bone-grafting before insertion of a femoral stem with cement in revision total hip arthroplasty. J Bone Joint Surg 79A:1834-1841, 1997.
34. Meding JB, Ritter MA, Keating EM, Faris PM, Edmondson K: A comparison of collared and collarless femoral components in primary cemented total hip arthroplasty. J Arthroplasty 14:123-130, 1999.
35. Mulroy WF, Harris WH: Revision hip arthroplasty with use of so-called second-generation cementing techniques for aseptic loosening of the femoral component. J Bone Joint Surg 78A:325-330, 1996.
36. Noble PC, Alexander JW, Lindahl LJ, et al: The anatomic basis of femoral component design. Clin Orthop 235:148-165, 1988.
37. Paprovsky WG: Distal fixation with fully coated stems in femoral revision: A 16 year follow-up. Orthopedics 21:993-995, 1998.
38. Pellicci PM, Wilson Jr PD, Sledge CB, et al: Long-term results of revision total hip replacement. A follow-up report. J Bone Joint Surg 67A:513-516, 1985.
39. Peters CL, Rivero DP, Kull LR, et al: Revision total hip arthroplasty without cement: Subsidence of proximally porous-coated femoral components. J Bone Joint Surg 77A:1217-1226, 1995.
40. Pierson JL, Harris WH: Cemented revision for femoral osteolysis in cemented arthroplasties. J Bone Joint Surg 76B:40-44, 1994.
41. Prendergast PJ, Taylor D: Stress analysis of proximo-medial femur after total hip replacement. J Biomed Eng 12:379-382, 1990.
42. Pritchett JW: Femoral bone loss following hip replacement. Clin Orthop 314:156-161, 1995.
43. Raut VV, Siney PD, Wroblewski BM: Cemented Charnley revision arthroplasty for severe femoral osteolysis. J Bone Joint Surg 776:362-365, 1995.
44. Róhl L, Larsen E, Linde F, Odgaard A, Jórgensen J: Tensile and compressive properties of cancellous bone. J Biomech 24:1143-1149, 1991.
45. Stambough JL, Balderston RA, Booth RE, Rothman RH, Cohn JC: Conversion total hip replacement. J Arthroplasty 1:261-269, 1986.
46. Tensi HM, Gese H, Ascherl R: Non-linear three-dimensional finite element analysis of a cementless hip endoprosthesis. Proc Inst Mech Eng H 203:215-222, 1989.
47. Tonino AJ, Romanini L, Rossi P, et al: Hydroxyapatite-coated hip prostheses. Clin Orthop 312:211-225, 1995.
48. Van Rietbergen B, Huiskes R, Weinans H, et al: The mechanism of bone remodelling and resorption around press-fitted THA stems. J Biomech 26:369-382, 1993.
49. Verdonschot N, Huiskes R: The effects of cementbone debonding in THA on the long-term failure probability of cement. J Biomech 30:795-802, 1997.
50. Wagner H: Revision of femoral stem with important loss of bone stock. Postgraduate Lectures. 1st European Congress of Orthopaedics (EFORT) Paris 1:64-74, 1993.
51. Walker PS, Mai SF, Cobb AG, Bentley G, Hua J: Prediction of clinical outcome of THR from migration measurements on standard radiographs. J Bone Joint Surg 776:705-714, 1995.
52. Walker PS, Robertson DD: Design and fabrication of cementless hip stems. Clin Orthop 235:25-34, 1988.
53. Whiteside LA, Arima J, White SE, Branam L, McCarthy DS: Fixation of the modular total hip femoral component in cementless total hip arthroplasty. Clin Orthop 298:184-190, 1994.
54. Wilkes RA, Birch J, Pearse MF, Lee M, Atkins RM: The Wagner technique for revision arthroplasty of the hip: A review of 24 cases. J Orthop Rheumatol 7:196-198, 1994.
55. Zhou XM, Walker PS, Robertson DD: Effect of press-fit femoral stems on strains in the femur. J Arthroplasty 5:71-82, 1990.