Application of the taylor polycrystal plasticity model to complex deformation experiments

Journal of Engineering Materials and Technology, Transactions of the ASME

Volumn 120, Issue 3, 1998, Pages 197-205

  Butler, G C ^a   Graham, S ^a   McDowell, D L ^a   Stock, S R ^b   Ferney, V C ^c  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b Georgia Institute of Technology   (United States)

^c Unlverslte de Technologic de Troyes   (France)

Author keywords

[No Author keywords available]

Indexed keywords

ANISOTROPY; COMPRESSION TESTING; COMPUTER SIMULATION; CONDUCTIVE MATERIALS; DISLOCATIONS (CRYSTALS); GRANULAR MATERIALS; PLASTIC DEFORMATION; POLYCRYSTALS; STRAIN; STRESS ANALYSIS; TEXTURES; TORSION TESTING;

POLYCRYSTAL PLASTICITY THEORY; TAYLOR MODEL;

COPPER;

EID: 0032123924     PISSN: 00944289     EISSN: 15288889     Source Type: Journal    
DOI: 10.1115/1.2812342     Document Type: Article

References (38)

1. Anand, L., and S. R. KaUdindi, 1994, “The Process of Shear Band Formation in Plane Strain Compression of FCC Metals: Effects of Crystallographic Texture,” Mech. Mater., Vol. 17, pp. 223-243.
2. Asaro, R. J., 1983, “Crystal Plasticity,” ASME Journal of Applied Mechanics, Vol.50, pp. 921-934.
3. Asaro, R. J., and A. Needleman, 1985, “Texture Development and Strain Hardening in Rate Dependent Polycrystals,” Acta Metall., Vol. 33, p. 923.
4. Bassani, J. L., and T. Y. Wu, 1991, “Latent Hardening in Single Crystals II. Analytical Characterization and Predictions,” Proc. R. Soc. (London), Series 435, p. 21.
5. Bay, B., N. Hansen, D. A. Hughes, and D. Kuhlmann-Wilsdorf, 1992, “Evolution of F.C.C. Deformation Structures in Polyslip,” JctoMer. Mater., Vol. 40(2), pp. 205-219.
6. Bronkhorst, C.A., S. R. Kalidindi, and L. Anand, 1992, “PolycrystalUne Plasticity and the Evolution of Crystallographic Texture in FCC Metals,” Phil. Trans. Royal Soc. (London), Series 341, pp. 443-477.
7. Fleck, N. A., MuUer, G. M., Ashby, M. F., and Hutchinson, J. W., 1994, “Strain Gradient Plasticity: Theory and Experiment,” Acta Metall. Mater., Vol. 42, No. 2, pp. 475-487.
8. Graham, S. Jr., 1995, “The Stress State Dependence of Finite Inelastic Deformation Behavior of F.C.C. PolycrystalUne Materials,” M.S. Thesis, Georgia Institute of Technology, Atlanta, GA.
9. Hansen, N., and D. Juul Jensen, 1992, “Flow Stress Anisotropy Caused by Geometrically Necessary Boundaries,” Acta Met. Mater., Vol. 40(12), pp. 3265-3275.
10. Harren, S., T. C. Lowe, R.J. Asaro, and A. Needleman, 1989, “Analysis of Large-Strain Shear in Rate-Dependent Face-Centered Cubic Polycrystals: Correlation of Micro- and Macromechanics,” Phil. Trans. Royal Soc. (London), Series 328, pp. 443-500.
11. Havner, K. S., 1973, “An Analytical Model of Large Deformation Effects in Crystalline Aggregates,” Foundations of Plasticity, ed. A. Sawczuk, p. 93.
12. Hill, R., 1972, “On Constitutive Macro-Variables for Heterogeneous Solids at Finite Strain,” Proc. R. Soc (London), Series A326, p. 131.
13. Horstemeyer, M. F., 1995, “Physically Based Modeling of Deformation-Induced Anisotropy,” Ph.D. Thesis, Georgia Institute of Technology, Atlanta, GA.
14. Hughes, D. A., 1995, “The Evolution of Deformation Microstructures and Local Orientations,” Proc. 16th RisO Int. Symp. On Materials Science: Microstructural and Crystallographic Aspects of Recrystallization, N. Hansen et al., eds., RisO National Laboratory, Roskilde, Denmark, 63-85.
15. Hughes, D.A., and N. Hansen, 1991, “Microstructural Evolution in Nickel During Rolling and Torsion,” Mater. Sci. Techn., Vol. 7(6), pp. 544-553.
16. Hughes, D. A., and N. Hansen, 1995, “High Angle Boundaries and Orientation Distributions at Large Strains,” Scripta Metall. Mater., Vol. 33(2), pp. 315-321.
17. Hughes, D. A., Q. Liu, D. C. Chrzan, and N. Hansen, 1997, “Scaling of Microstructural Parameters: Misorientations of Deformation Induced Boundaries,” Acta. Mater., Vol. 45(1), pp. 105-112.
18. Iwalsuma, T., and S. Nemat-Nasser, 1984, “Finite Elastic-Plastic Deformation of Polycrystalline Metals,” Proc. R. Soc. (Lond.), Series A394, p, 101.
19. Juul Jensen, D., and N. Hansen, 1990, “Flow Stress Anisotropy in Aluminum,” Acta Met. Mater., Vol. 38, pp. 1369-1380.
20. Kalidindi, S. R., and L. Anand, 1991, “Towards a Capability for Predicting the Evolution of Crystallographic Texture During Forming of Metals,” AMDVol. 125, Advances in Finite Deformation Problems in Materials Processing and Structures, N. Chandra and J. N. Reddy, eds., ASME, pp. 3-14.
21. Kalidindi, S. R., C. A. Bronkhorst, and L. Anand, 1992, “Crystallographic Texture Evolution in Bulk Deformation Processing of FCC Metals,” J. Mech. Phys. Solids, Vol. 40(3), pp. 537-569.
22. Kocks, U. F., M. G. Stout, and A. D. Rollett, 1988, “The Influence of Texture on Strain Hardening,” Strength of Metals and Alloys, Vol. 1, pp. 25-34.
23. Kocks, U. P., J. S. Kallend, H.-R. Wank, A. D. Rollett, and S. I. Wright, 1994, popLA, Preferred Orientation Package-Los Alamos, LANL LA-CC-89-18.
24. Leffers, T., 1992, “A Model for RoUing Deformation with the Grains Subdivided into Cell Blocks,” Proc. 13th Riso Int. Symp. On Materials Science: Modeling of Plastic Deformation and its Engineering Applications, p. 7.
25. Leffers, T., and N. Hansen, 1992, “Texture, Anisotropy, Microstructure, and Models,” Proc. 13th Riso Int. Symp. On Materials Science: Modeling of Plastic Deformation and its Engineering Applications, pp. 51-11.
26. Lindholm, U. S., A. Nagy, G. R. Johnson, and J. M. Hoegfeldt, 1980, “Large Strain, High Strain Rate Testing of Copper,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 102, pp. 376-381.
27. Mathur, K. K., and P. R. Dawson, 1989, “On Modeling the Development of Crystallographic Texture in Bulk Forming Processes,” Int. J. Plasticity, Vol. 5, p. 67.
28. Molinari, A., G. Canova, and S. Ahzi, 1987, “A Self-Consistent Approach of the Large Deformation Polycrystal Plasticity,” Acta Met., Vol. 35, p. 2983.
29. Muller, D., X. Lemoine, and M. Berveiller, 1994, “Nonlocal Behavior of Elastoplastic Metals: Theory and Results,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 116, pp. 378-383.
30. Nemat-Nasser, S., and M. Obata, 1986, “Rate-Dependent, Finite Elasto-Plastic Deformation of Polycrystals,” Proc. R. Soc. (London), Series A407, p. 45.
31. Pierce, D., R. J. Asaro, and A. Needleman, 1982, “An Analysis of Nonuniform and Localized Deformation in Ductile Single Crystals,” Acta Met., Vol. 30, pp. 1087-1119.
32. Rollett, A. D., D. Juul Jensen, and M. G. Stout, 1992, “Modelling tlie Effect of Microstructure on Yield Anisotropy,” Proc. 13th RisO Int. Symp. On Materials Science, Andersen, S. I., et al., eds., RisO National Laboratory, Roskilde, Denmark, pp. 93-109.
33. Stout, M. G., J. S. Kallend, U. F. Kocks, M. A. Przystupa, and A. D. Rollett, 1988, “Material Dependence of Deformation Texture Development in Various Deformation Modes,” Proc. 8th Int. Conf. On Textures of Materials (ICOTOM S), J. S. Kallend and G. Gottstein, eds. The Metallurgical Society.
34. Sun, S. S., Adams, B. L., Shet, C, Saigal, S., and King, W., 1997, “A Mesoscale Experimental Study of the Interaction of Grain Boundaries with the Deformation Field,” Proc. Plasticity 97: The 6th Int. Symp. On Plasticity and Its Current Applications, A. S. Khan, ed., 14-18 July, Juneau, Alaska, pp. 89-90.
35. Taylor, G. I., 1938a, “Plastic Strain in Metals,” J. Inst. Metals, Vol. 62, p. 307.
36. Taylor, G. I., 1938b, “Analysis of Plastic Strain in a Cubic Crystal,” Stephen Timoshenko 60th Anniversary Volume, J. M. Lessels, ed. p. 218.
37. Wilmanski, K., 1992, “Macroscopic Theory of Evolution of Deformation Textures,” Int. J. Plasticity, Vol. 8, pp. 959-975.
38. Wu, P. D., K. W. Neale, and E. Van Der Giessen, 1996, “Simulation of the Behaviour of FCC Polycrystals During Reversed Torsion,” Int. J. Plasticity, Vol. 12(9), pp. 1199-1219.