Survey of stress analyses of the femoral hip prosthesis

Applied Mechanics Reviews

Volumn 53, Issue 1, 2000, Pages 1-18

  Joshi, Makarand G ^a   Santare, Michael H ^a   Advani, Suresh G ^a  

^a UNIVERSITY OF DELAWARE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0002817984     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.3097335     Document Type: Article

References (136)

1. Akay M and Aslan N (1996), Numerical and experimental analysis of a polymeric composite hip joint, J Biomed Mat Res 31(2) 167-182
2. Andriacchi T, Galante J, Belytschko T, and Hampton S (1976), A stress analysis of the femoral stem in total hip prosthesis, J Bone and Joint Surgery 58A, 618-624
3. Askew MJ, Hori RY, Shybut GT and Stulberg SD (1979), Femoral stresses following total surface replacement hip arthroplasty, ASME Appl Mech Div Biomech Syrnp 32, 187-189
4. Askew MJ, Lewis JL, and Hanmer RS (1983), Effects of load variations on finite element analyses of total hip prosthesis, ASME Appl Mech Div Biomech Symp 56,47-50
5. Biegler FB, Reuben JD, and Akin JE (1994), The role of flutes and implant material in minimizing femoral stress shielding following total hip replacement, Adv in Bioeng 28, 443-444
6. Blake TA, Davy DT, Saravanos DA, and Hopkins DA (1992), Numerical optimization of composite hip stem designs under different loading conditions, Adv in Bioeng 22, 151-153
7. Brown T, Pedersen D, Radin E, and Rose R (1988), Global mechanical consequences of reduced cement/bone coupling rigidity in proximal femoral arthroplasty: a three-dimensional finite element analysis, J Biomech 21(2) 115-129
8. Burke DW, Davies JP, O’Connor DO, and Harris WH (1984), Stem modulus in total hip stem, Transactions, 2nd World Congress on Biomaterials 1, 320
9. Buskirk W, Cowin S, and Ward R (1981), Ultrasonic measurement of orthotropic elastic constants of bovine femoral bone, J Biomech Eng 103, 67-72
10. Carter DR and Hayes WC (1977), The compressive behaviour of bone as a two-phase porous structure, J Bone and Joint Surgery 59A, 954-962
11. Chang F and Perez J (1990), Stiffness and strength tailoring of a hip prosthesis made of advanced composite materials, J Biomed Mat Res 24(7) 873-899
12. Chamley J (1960, Anchorage of femoral head prosthesis to shaft of femur, J Bone and Joint Surgeiy 42B, 28
13. Cheal E, Spector M, and Hayes W (1992), Role of loads and prosthesis material properties on the mechanics of the proximal femur after total hip arthroplasty, J Orthopedic Res 10(3) 405-422
14. Christel P, Meunier A, Leclercq S, Bouquet P, and Buttazzoni B (1987), Development of a carbon-carbon hip prosthesis, J Biomed Mat Res 21(A2) 191-218
15. Cook S, Klawitter J, and Weinstein A (1980), Influence of design parameters on calcar stresses following femoral head arthroplasty, J Biomed Mat Res 14(2) 133-144
16. Cook SD, Skinner HB, Weinstein AM, and Haddad RJ (1982), Stress distribution in the proximal femur after surface replacement: effects of prosthesis and surgical techniques, Biomaterials, Medical Devices and Artificial Organs 10(2) 85-102
17. Cowin SC (1989), Bone Mechanics, CRC Press, Boca Raton FL
18. Crowninshield R, Brand R, Johnston R, and Milroy J (1980b), The effect of femoral cross-sectional geometry on cement stresses in total hop reconstruction, Clinical Orthopedics and Related Res 146, 71-77
19. Crowninshield R, Pedersen D, and Brand R (1980a), A measurement of proximal femur strain with total hip arthroplasty, J Biomech Eng 102, 230-233
20. Crowninshield R and Tolbert J (1983), Cement strain measurement surrounding loose and well fixed femoral component stems, J Biomed Mat Res 17, 819
21. deBeus A, Hoeltzel D, and Eftekar N (1990), Design optimization of a prosthesis stem reinforcing shell in total hip arthroplasty, J Biomech Eng 112(3) 347-357
22. Diegel PD, Daniels AU, and Dunn HK (1989), Initial effects of collarless stem stiffness on femoral bone strain, J Arthroplasty 4(2) 173-178
23. Ecker JA and Ville JA (1989), Part I: A three-dimensional finite element analysis model of an artificial hip and bone, ASME Int Compnt in Eng Conf, 369-374
24. Edinin AA, Taylor DL, and Bartel DL (1991), Automatic assignment of bone moduli from CT data: A 3D finite element study, Trans of Orthopedic Res Soc 16,491
25. Elkholy AH (1995), Design optimization of the hip nail-plate-screws implant, Comput Methods and Programs in Biomed, 48, 221-227
26. Engh CA, Bobyn JD, Glassman AH (1987), Porous-coated hip-replacement - the factors governing bone ingrowth, stress shielding and clinical results, J Bone and Joint Surgery-British Volume, 69(1) 45-55
27. Fagan M and Cer A (1986), Role of the collar on the femoral stem of cemented total hip replacements, J Biomed Eng 8, 295-304
28. Finlay JB, Chess DG, Hardie WR, Rorabeck CH, and Bourne RB (1991), An evaluation of three loading configurations for the in vitro testing of femoral strains in total hip arthroplasty, J Orthopedic Res 9, 749-759
29. Follaci F and Chamley J (1969), A comparison of results of femoral head prostheses with and without cement, Clinical Orthopedics and Related Res 62, 156
30. Fyhrie DP, Carter DR, and Schurman DJ (1988), Effects of ingrowth, geometry and material on stress transfer under porous-coated hip surface replacement, J Orthopedic Res 6, 3, 425-433
31. Goel VK and Svensson NL (1977), The finite element stress analysis of a human femur fitted with Chamley prosthesis, Australasia Conf on Mech of Struct and Mat, 66-73
32. Guldberg RE, Hollister SJ, Charras GT (1998), The accuracy of digital image-based finite element models, J Biomech Eng, 120, 2, 289-295
33. Haboush E (1953), A new operation for arthroplasty of the hip based on biomechanics, photoelasticity, fast setting dental aciylic and other considerations, Bull Hosp Jt Dis 13, 242-277
34. Hampton S, Andriacchi T, and Galante J (1980), Three dimensional stress analysis of the femoral stem of a total hip prosthesis, J Biomech 13, 5, 443-448
35. Hampton SJ, Andriacchi TP, Draganich LF, and Galante JO (1981), Stresses following stem cement bond failure in femoral total hip implants, Trans of Orthopedic Res Soc 6, 144
36. Harrigan T and Harris W (1991a), Three-dimensional non-linear finite element study of the effect of cement-prosthesis debonding in cemented femoral total hip components, JBiomech 24(11) 1047-1058.
37. Harrigan P and Hams W (1991b), Finite element study of the effect of diametrical interface gaps on the contact areas and pressures in uncemented cylindrical femoral total hip components, J Biomech 24(1) 87-91
38. Harrigan TP, Kareh, JA, O'Connor DO, Burke DW, and Harris WH (1992), A finite element study of the initiation of failure of fixation in cemented femoral total hip components, J Orthopedic Res 10, 1, 134-144
39. Hedia H, Barton D, Fisher J, and Elmidany T (1996), Method for shape optimization of a hip prosthesis to maximize the fatigue life of the cement, Medical Eng Phys 18, 8, 647-654
40. Hefzy MS and Singh SP (1997), Comparison between two techniques for modeling interface conditions in a porous coated hip endoprosthesis, Medical Eng and Phys 19(1) 50-62
41. Holmberg PD, Bechtold JE, Sun BN, Kyle RF, and Gustilo RB (1986), Strain analysis of a femur with long stem press fit prosthesis, Proc of Orthopedic Res Soc, 336
42. Hubsch P, Middleton J, Meroi E, and Natali A (1995), Adaptive fmite-element approach for analysis of bone/prosthesis interaction, Medical and Biological Eng and Comput 33(1) 33-37
43. Huiskes R (1980), An experimental stress analysis of a cadaveric femur with implants, Acta Orthopaedica Scandanavica Supplement 185, 125-128
44. Huiskes R (1990), The various stress patterns of press-fit, ingrown, and cemented femoral stems, Clinical Orthopedics and Related Res 261, 2738
45. Huiskes R and Boeklagen R (1989), Mathematical shape optimization of hip prosthesis design, J Biomech 22, 8-9, 793-804
46. Huiskes R and Chao EYB (1983), A survey of finite element analysis in orthopaedic biomechanics: the first decade, J Biomech 16(6) 385-409
47. Huiskes R and VanHeck J (1981), Stresses in the femoral head-neck region after surface replacement, a three dimensional finite element analysis, Trans of Orthopaedic Res Soc 6, 174
48. Iyer SL, Blunck CFJ, and Selvam RP (1983), Development of optimized epoxy graphite implant for the total hip, Biomedical Sciences Instrumentation Proc 19, 57-70
49. Iyer L, Jayasekaran, Blunck C, and Selvam R (1984), Development of optimized graphite epoxy implant for total hip joint, ISA Trans 23(2) 7-14
50. Judet J and Judet R (1950), The role of an artificial femoral head for arthroplasty of the hip joint, J Bone and Joint Surgery 32B, 166
51. Kang Y, Park H, Youm Y, Lee I, Ahn M, and Ihn J (1993), Three dimensional shape reconstruction and finite element analysis of femur before and after the cementless type of total hip replacement, J Biomed Eng 15(6) 497-504
52. Katoozian H and Davy DT (1993), Three dimensional shape optimization of femoral components of total hip prostheses, Proc Bioeng Conf 24, 552-555
53. Keavany T and Bartel DL (1989), Load transfer in the proximal femur with a press-fit prosthesis, ASME AMD Biomech Syrnp 98, 301-304
54. Keavany TM and Bartel DL (1992), Mechanical consequences of bone ingrowth and fibrous tissue encapsulation for a cementless hip prosthesis in the long-term, Trans of Orthopaedic Res Soc 17, 73
55. Keavany TM and Bartel DL (1993a), Load transfer with the Austin Moore cementless hip prosthesis, J Orthopaedic Res 11(2) 272-284
56. Keavany T and Bartel D (1993b), Effects of porous coating and collar support on early load transfer for a cementless hip prosthesis, J Biomech 26(10) 1205-1216
57. Keavany T and Bartel D (1993c), Effects of porous coating with and without collar support, on early relative motion for a cementless hip prosthesis, J Biomech 26(12)1355-1368
58. Keavany T and Bartel D (1994), Fundamental load transfer patterns for press-fit, surface-treated intramedullary fixation stems, J Biomech 27(9) 1147-1157
59. Keavany TM and Ulla IM (1995), The effects of variations in the amount and distribution of bone ingrowth on bone stresses around a fully porous-coated hip prosthesis, Adv in Bioeng 31, 279-280
60. Keyak JH, Meagher JM, Skinner HB, Mote CD (1990), Automated 3dimensional fmite-element modeling of bone-a new method, J Biomed Eng 12(5) 389-397
61. Keyak JH, Fourkas MG, Meagher JM, Skinner HB (1993), Validation of an automated method of 3-dimensional fmite-element modeling of bone, J Biomed Eng 15(6) 505-509.
62. Kohn DH, Ko CC, and Hollister SJ (1993), Global/local finite element analysis of porous coated total hip replacements, Adv in Bioeng 26, 231-234
63. Kuiper J and Huiskes R (1997), Mathematical optimization of elastic properties: application to cementless hip stem design, J Biomech Eng 119(2) 166-174
64. Kwak BM, Lim OK, Kim YY, and Rim K (1979), An investigation of the effect of cement thickness on an implant by finite element stress analysis, Int Orthopedics, 319-351
65. Lengsfeld M, Schmidt P, Alter J, Kaminsky J, Leppek R (1998), Comparison of geometry-based and CT voxel-based finite element modeling and experimental validation, Medical Eng Phys 20, 515-522
66. Lewaller D and Cabanela M (1996), Hybrid primary total hip arthroplasty A 5- to 9-year follow-up study, Clinical Orthopedics and Related Res 333, 126-133
67. Lewis J, Askew M, Wixson R, Kramer G, and Tarr R (1984), The influence of prosthetic stem stiffness and of a calcar collar on stresses in the proximal end of the femur with a cemented femoral component, J Bone Joint Surgery 66Â, 280-286
68. Mann K, Bartel D, Wright T, and Burstein A (1995), Coulomb frictional interfaces in modeling cemented total hip replacements, J Biomech 28(9) 1067-1078
69. Markolf K and Amstutz H (1976), A comparative experimental study of stresses in femoral total hip replacement components: Effects of prosthesis orientation and acrylic fixation, J Biomech 9, 73-79
70. McBeath A, Schopier R, and Narechnia R (1980), Circumferential and axial strain in the proximal femur, effect of prosthesis type and position, Clinical Orthopedics and Related Res 150, 301-305
71. McKee G (1970), Development of total prosthetic replacement of the hip, Clinical Orthopedics and Related Res 72, 85-103
72. McNamara B, Cristofolini L, Toni A, and Taylor D (1997), Relationship between bone-prosthesis bonding and load transfer in total hip reconstruction, JBiomech 30(6) 621-630
73. Mizrahi R, Livingstone R, and Rogan I (1979), An experimental analysis of the stresses at the surface of Chamley hip prosthesis in different anatomical positions, JBiomech 12, 491-500
74. Moore A and Bohlmann H (1943), Metal hip joint: a case report, J Bone Joint Surgery, 25A, 688
75. Moore A (1952), Metal hip joint: a new self-locking vitallium prosthesis, South Med J AS, 1015
76. Munting E and Verhelpen M (1995), Fixation and effect on bone strain pattern of a stemless hip prosthesis, J Biomech 28(8) 949-961
77. Murray WR and Van Meter JW (1982), Surface replacement hip arthroplasty: Results of the first seventy-four consecutive cases at the University of California, San Francisco, Proc of 10th Open Sci Meeting of Hip Soc, 156-166
78. Namba RS, Keyak JH, Kim AS, Vu LP, Skinner HB (1998), Cementless implant composition and femoral stress- a finite element analysis, Clinical Orthopedics and Related Res 347, 261-267
79. Natarajan RN, Andriacchi TP, and Sumner DR (1991), Micromotion in straight versus curved uncemented femoral component, Adv in Bioeng 20, 177-180
80. Natarajan RN, Andriacchi TP, and Sumner DR (1992), A relationship between proximal femoral stress shielding and the extent of porous coating on anatomic and straight femoral components, Adv in Bioeng 22, 155-158
81. Norman TL, Hustosky KT, and Blaha JD (1994), Effect of stem taper and creep on cement mantle stress and subsidence of THA, Adv in Bioeng 28,365-366
82. Nowak MD, Lewis CG, and Leons DJ (1992), Analysis of hip implant stem modifications via a validated orthotropic finite element model, Adv in Bioeng 22, 163-166
83. Oh I and Harris W (1978), Proximal strain distribution in loaded femur, J Bone Joint Surgery 60A, 75-85
84. Oh I, Bourne RB, and Harris WH (1979), Strain distribution in the femur after surface replacement of the hip, Trans of Orthopaedic Res Soc 4, 35
85. Ortloff S, Tensi HM, Gese H, and Wynarsky G (1991), The effect of porous coating and material properties on micromotion of a cementless femoral total hip replacement, Annual Conf on Eng in Medicine and Biology 13(5) 1976-1977 '
86. Otani T and Whiteside L (1993), Strain distribution in the proximal femur with flexible composite and metallic femoral components under axial and torsional loads, JBiomed Mat Res 27(5) 575-585
87. Peterson L (1951), The use of a metallic femoral head, J Bone Joint Surgery 33A, 65
88. Prendergast P and Taylor D (1990), Stress analysis of the proximal-medial femur after total hip replacement, J Biomed Eng 12(5) 379-382
89. Rice J, Cowin S, and Bowman J (1988), On the dependence of the elasticity and strength of cancellous bone on apparent density, J Biomech 21(2) 155-168
90. Roberts JC and Ling FF (1980), The design of a continuous fiber composite surface hip replacement, J Mech Eng 102, 688-694
91. Rohlmann A, Bergmann G, and Kolbelt R (1979), Analytical and experimental study of stresses and strains in the human femur before and after joint replacement, Biomech 7A, 347-353
92. Rohlmann A, Moessner U, and Bergmann G (1983), Finite-element-analysis and experimental investigation in a femur with hip endoprosthesis, J Biomech, 16(9) 727-742
93. Rohlmann A, Moessner U, Bergmann G, Hees G, and Koelbelt R (1987), Effects of stem design and material properties on stresses in hip endoprosthesis, J Biomed Eng 9(1), 77-83
94. Rohlmann A, Cheat E, Hayes W, and Bergmann G (1988), Nonlinear finite element analysis of interface conditions in porous coated hip endoprosthesis, J Biomech 21(7) 608-611
95. Rybicki E, Simonen F, and Weis E (1972), On the mathematical analysis of stress in the human femur, J Biomech 16, 203-215
96. Samir M and Singh S (1997), Comparison between two techniques for modeling interface conditions in a porous hip endoprosthesis, Medical EngPhys 19(1) 50-62
97. Santare MH, Joshi MG, Advani SG, Riley, SP, and Miller F (2000), Analysis of a femoral hip prosthesis designed to reduce stress shielding, submitted to J Biomech
98. Scales JT (1966), Arthroplasty of the hip using foreign materials: A history, Proc Inst of Mech Eng 181, 64-84
99. Scholten R, Rohrle H, and Sollbach W (1978), Analysis of stress.distribution in natural and artificial hip joints using the finite element method, South Afidcan Mech Eng 28, 220-225
100. Shareef NH, Lin S, and Levine DL (1995), Improvement in total hip replacement performance by reducing bone cement stress through the use of a tapered metal core design, Adv in Bioeng 31,275-276
101. Shaip D and Porter K (1985), The Chamley total hip arthroplasty in patients under the age 40, Clinical Orthopedics and Related Res 201, 51-56
102. Shirandami R, and Esat I (1990), New design of hip prosthesis using fibre reinforced carbon composite, J Biomed Eng 12(1) 19-22
103. Shybut GT, Askew MJ, Hori RY, and Stulberg SD (1980), Theoretical and experimental studies of femoral stresses following surface replacement hip arthroplasty, Proc of 8th Open Sci Meeting of Hip Soc 192-224
104. Sih G, Matic P, and Berman A (1981), Failure prediction of the total hip prosthesis system, J Biomech 14(12) 833-841
105. Simmons CA, Cheal EJ, and Orr TE (1994), The optimal surface coating distribution on a femoral prosthesis for total hip arthroplasty, Adv in Bioeng 28, 117-118
106. Sloten J, Labey L, Van A, Helson J, and Van G (1993), The development of physiological hip prosthesis: the influence of design and materials, J Mat Sci: Mat in Med 4(4) 407-414
107. Smith-Peterson M (1948), Evolution of mold arthroplasty, J Bone Joint Surgery, 30B, 59
108. Spires WP, Cook SD, Klawitter JJ, Weinstein AM, and Powell PL (1981), An analysis of design parameters affecting stresses in conservative hip replacement, Trans of Annual Meeting of Soc for Biomat 4, 30
109. Strozzi A and Unsworth A (1994), Axisymmetric finite element analysis of hip replacement with an elastomeric layer: the effects of layer thickness, Proc ImechE, Part H: J Eng in Med 208(3) 139-149
110. Svensson N, Valliappan S, and Wood R (1977), Stress analysis of a human femur with implanted Chamley prosthesis, J Biomech, 10(9) 581-588
111. Swenson L, Schurman D, and Piziali R (1981), Finite element temperature analysis of a total hip replacement and measurement of PMMA curing temperatures, J Biomed Mat Res,15(l) 83-96
112. Tanner K, Yettram A, Loeffler M, Goodier W, Freeman M, and Bonfield W (1995), Is stem length important in uncemented endoprosthesis? Medical Eng Phys \1 (A) 291-296
113. Tarr RR, Lewis JL, Jaycox D, Sarmiento A, Scmidt J, and Latta LL (1979), Effect of materials, stem geometry, and collar-calcar contact on stress distribution in the proximal femur with total hip, Trans of Orthopaedic Res Soc 4, 34
114. Tarr R, Lewis J, Ghassemi F, Sarmiento A, Clarke I, and Weingarten V (1980), Anatomic three dimensional finite element model of the proximal femur with total hip prosthesis, Finite Elements in Biomech 2, 511-525
115. Taylor M and Abel E (1993), Finite element analysis of poor distal contact of the femoral component of a cementless hip endoprosthesis, Proc ImechE, Part H: J Eng in Med 207(4) 255-261
116. Taylor D, Martin C, Comelis B, and Jones M (1993), An isoelastic prosthesis using a new composite material, Proc ImechE, Part IT: J Eng in Med 207, 121-125
117. Taylor M, Tanner K, Freeman M, and Yettram A (1995), Cancellous bone stresses surrounding the femoral component of a hip prosthesis: an elastic-plastic finite element analysis, Med Eng Phys, 17(7) 1155-1166
118. Tensi H, Gese H, and Ascherl R (1989), Non-linear Three-dimensional finite element analysis of a cementless hip endoprosthesis, Proc ImechE, Part H: J Eng in Med, 203(4) 215-222
119. Thompson F (1952), Experience with a vitallium intramedullary hip prosthesis, Tex State J Med 64, 749
120. Toni A, McNamara B, Viceconti M, Baruffaldi F, and Giunti A (1996), Bone remodeling after total hip athroplasty, J Mat Sci: Mat in Med 7(3) 149-152
121. Valliappan S, Svensson N, and Wood R (1977), Three dimensional stress analysis of the human femur, Comput in Biology and Med 7, 253-264
122. Verdonschot N, Huiskes R, and Freeman M (1993), Pre-clinical testing of hip prosthesis design: a comparison of finite element calculations and laboratory tests, Proc ImechE, PartH: J Eng in Med 207(3) 149-154
123. Verdonschot N and Huiskes R (1996), Subsidence of THA stems due to aciylic cement creep is extremely sensitive to interface friction, J Biomech 29(12) 1569-1575
124. Vichnin H and Battennan S (1986), Stress analysis and failure prediction in the proximal femur before and after total hip replacement, J Biomech Eng 108(1) 33-41
125. Vroemen W, Huiskes R, Strens P, and Sloof TJ (1986), A non-linear finite element simulation of interface loosening and bone resorption after hip resurfacing, Trans, Orthopaedic Res Soc, 453
126. Walker P, Schneeweis D, Murphy S, and Nelson P (1987), Strains and micromotion of press-fit femoral stem prosthesis, J Biomech 20(7) 693-702
127. Weinans H, Huiskes R, Verdonschot N, and van Rietbergen B (1991), The effect of adaptive bone remodeling threshold levels on resorption around noncemented hip stems, Adv in Bioeng 20, 303-306
128. Weinans H, Huiskes R, and Grootenboer H (1994), Effects of fit and bonding characteristics of femoral stems on adaptive bone remodeling, J Biomech Eng 116(4) 393-400
129. Weinstein AM, Koeneman JB, and Hansen TM (1987), Finite element analysis of a composite material hip stem, 13th Annual Meeting of Soc for Biomat 264
130. Wegener OH, Fassel R, Welger D, Wandrey S, Dixon AK, and Schumacher U (1993), Whole Body Computed Tomography, Blackwell Sci Publ, Boston
131. Wheeler J, Miles A, and Clift S (1997), Influence of the stem-cement interface in total hip replacement - A comparison of experimental and finite element approaches, Proc ImechE, Part H: J Eng in Med 211(2) 181-186
132. Wiles P (1958), The surgery of the osteoarthritic hip, BrJSurg 45, 488-497
133. Wilson AM and Jacobs CH (1983), Bone cement stress dependency on cement modulus of elasticity in total hip replacement, ASME Biomech Symp 56, 39-42
134. Yang R, Choi K, Crowninshield R, and Brand R (1984), Design sensitivity analysis, a new method for implant design and a comparison with parametric finite element analysis, J Biomech 17, 849-854
135. Yoon Y, Jang G, and Kim Y (1989), Shape optimal design of the stem of a cemented hip prosthesis to minimize stress concentration in the cement layer, J Biomech 22(11-12)1279-1284
136. Zannoni, C, Mantovani, R, Viceconti, M (1998), Material properties assignment to finite element models of bone structures: A new method, Medical Eng Phys 20(10) 735-740