Applications of computational thermodynamics: Schloæ Ringberg, November 30 - December 5, 1997

Calphad: Computer Coupling of Phase Diagrams and Thermochemistry

Volumn 24, Issue 1, 2000, Pages 55-94

  Kattner, Ursula R ^a   Eriksson, Gunnar ^b   Hahn, Iris ^c   Schmid Fetzer, Rainer ^c   Sundman, Bosse ^d   Swamy, Varghese ^e   Kussmaul, Armin ^e   Spencer, Philip J ^f   Anderson, Tim J ^g   Chart, Tim G ^h   Costa E Silva, André ⁱ   Jansson, Bo ^j   Lee, Byeong Joo ^a   Schalin, Mikael ^d  

^a NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

^b Siemens AG ^*

^c CLAUSTHAL UNIVERSITY OF TECHNOLOGY   (Germany)

^d CSERO   (Sweden)

^e CSERO   (Germany)

^f UNIVERSITY OF FLORIDA   (United States)

^g Chart Associates   (United Kingdom)

^h FLUMINENSE FEDERAL UNIVERSITY   (Brazil)

ⁱ SECO TOOLS AB   (Sweden)

^j Korea Research Institute of Standards and Science   (South Korea)

more..

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0001923605     PISSN: 03645916     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (201)

1. [33Dix] E.H. Dix, W.L. Fink, and L.A. Willey, Trans. AIME 104 (1933) 335.
2. [43Phi] H.W.L. Phillips, J. Inst. Metals 69 (1943) 275.
3. [59Phi] H.W.L. Phillips, "Annotated Equilibrium Diagrams of Some Aluminium Alloys Systems," Monograph and Report Series, No 25, The Institute of Metals, London, (1959).
4. [61Phi] H.W.L. Phillips, "Equilibrium Diagrams of Aluminium Alloys Systems," The Aluminium Development Association, London, (1961).
5. [71God] T. Gödecke and W. Köster, Z. Metallkde. 62 (1971) 727.
6. [72Pan] M.B. Panish and M. Ilegems, Prog. Solid State Chem. 7 (1972) 39.
7. [74Sig] G..K. Sigworth and J.F. Elliott, Metal Science 8 (1974) 298.
8. [76Mon] L.F. Mondolfo, "Al Alloys; Structure and Properties", Butterworths, London & Boston, (1976).
9. [76Plu] L.N. Plummer, B.F. Jones, and A.H. Truesdell, "WATEQF- a FORTRAN IV version of WATEQ, a computer program for calculating chemical equilibrium of natural waters," U.S. Geol. Surv. Water-Resources Investigations Report 76-13, (1976).
10. [76Wes] J. Westall, J.L. Zachary, and F.M.M. Morel, "MINEQL, a computer program for the calculation of chemical equilibrium composition of aqueous systems," Mass. Inst. Tech. Dept. Civil Eng. Tech. Note 18, 1996.
11. [79Eri] G. Eriksson, Anal. Chim. Acta 25 (1979) 2651.
12. [79Nor] D.K. Nordstrom, L.N. Plummer, T.M.L. Wigley, T.J. Wolery, J. W. Ball, E.A. Jenne, R.L. Bassett, D.A. Crerar, T.M. Florence, B. Frtiz, M. Hoffman, G.R. Holdren, Jr., G.M. Lafon, S.V. Mattigod, R.E. McDuff, F. Morel, M.M. Reddy, G. Sposito, and J. Thrailkill, "A comparison of computerized chemical models for equilibrium calculations in aqueous systems," in: Chemical Modelling in Aqueous Systems, E.A. Jenne (ed.), p. 857, American Chemical Society Symposium (Series 93), (1979).
13. [79Spo] G. Sposito and S.V. Mattigod "GEOCHEM: A computer program for the calculation of chemical equilibria in soil solution and other natural water systems," Dept. Soil Environ. Sci., University of California, (1979).
14. [80Par] D.L. Parkhurst, D.C. Thorstenson, and L.N. Plummer "PHREEQE - a computer program for geochemical calculations," U.S. Geol. Surv. Water-Resources Investigations Report 80-96, (1980, revised and reprinted, 1990).
15. [81Dzi] A.M. Dziewonski and D.L. Anderson, Phys. Earth Planet. Inter. 25 (1981) 297.
16. [83And] T.J. Anderson, "Chemical Vapor Deposition of Semiconductor Materials," AIChE Symp. Series 229, 79, p. 150 (1983).
17. [83Wol] T.J. Wolery, "EQ3NR: a computer program for geochemical aqueous speciation-stability calculations: theoretical manual, user's guide, and related documentation (Version 7)," Lawrence Livermore National Laboratory Report UCRL-MA-110662-PT-III, (1983).
18. [84Ber] R.G. Berman and T.H. Brown, Geochim. Cosmochim. Acta 45 (1984) 661.
19. [84Gay] H. Gaye and J. Welfringer, "Modelling of the thermodynamic properties of complex metallurgical slags," Second International Symposium on Metallurgical Slags and Fluxes, Lake Tahoe, Nevada, TMS-AIME, (1984).
20. [84Nor] D.K. Nordstrom and J.W. Ball, "Chemical models, computer programs and metal complexation in natural waters," in: International symposium on trace metal complexation in natural waters, C.J.M. Kramer and J.C. Duinker (eds.), p. 149, Martinus Nijhoff/Dr. J.W. Junk Publishing Co., (1984).
21. [85Ase] T.L. Aselage, K.M. Chang , and T.J. Anderson, "Solid-Liquid Equilibrium in Multicomponent Group III-V Semiconductor Materials," ACS Symposium Series, 290, p. 276, (1985).
22. [85Ghi] M.S. Ghiorso, Contrib. Mineral. Petrol. 90 (1990) 107.
23. [85Hes] D.W. Hess, K.F. Jensen, and T.J. Anderson, Reviews Chem. Eng. 3 (1985) 97.
24. [85Mul] A.B. Muller, D.L. Parkhurst, and P.W. Tasker, "The use of the PHREEQE code in modelling environmental geochemical problems encountered in performance assessment modelling," in: Proceedings of Symposium on Groundwater Flow and Transport Modelling for Performance Assessment of Deep Geologic Disposed of Radioactive Waste: A Critical Evaluation of the State of the Art. Albuquergue, New Mexico, (1985).
25. [85Sun] B. Sundman, B. Jansson, and J.-O. Andersson, Calphad 9 (1985) 153.
26. [86Bak] L. Bäckerud, E. Krol, J. Tamminen, "Solidification Characteristics of Aluminium Alloys, Vol. 1: Wrought Alloys," Skanaluminium, (1986).
27. [86Hil] M. Hillert, Metall. Trans. A 17A (1986) 1878.
28. [86Nor] D.K. Nordstrom and J. Munoz, "Geochemical Thermodynamics," Blackwell Scientific, Palo Alto, (1986).
29. [86Pel] F. Pellicani, F. Villette, and J. Dubois, "The production of clean, isotropic steel by means of calcium treatment with the Affival cored-wired," in: Proceedings of ScanInject 4, MEFOS, Lulea Sweden, (1986).
30. [86Sau] N. Saunders and A.P. Miodownik, J. Mater. Res. 1 (1986) 38.
31. [86Smi] N.K. Smit, G.A. Acket, and C.J. van der Laan, Thin Solid Films 138 (1986) 171.
32. [86Ues] Y. Ueshima, S. Mizoguchi, T. Matsumiya, and H. Kajioka, Metall. Trans. B 17B (1986) 845.
33. [87Bri] G.H. Brimhall and D.A. Crerar "Ore fluids: Magmatic to supergene," in: Thermodynamic Modeling of Geological Materials: Minerals, Fluids, and Melts, Rev. Mineral. 17, I.S.E. Carmichael and H.P. Eugster (eds.), p. 235, Mineralogical Society of America, (1987).
34. [87Cha] S. Chang, D. Unzicker, and T.J. Anderson, "A Thermodynamic Analysis of CVD of Ge-Si in the Ge-Si-Cl-H System," in: Proc. Tenth Int. Conf. on CVD, p. 122 (1987).
35. [87Flo] S.C. Flood and J.D. Hunt, J. Crystal Growth 82 (1987) 543.
36. [87Deo] B. Deo, P. Ranjan, and A. Kumar, Steel Research 58(9) (1987) 427.
37. [87Gay] H. Gaye, C. Gatellier, M. Nadif, P.V. Riboud, J. Saleil and M. Faral, Revue Metallurgie CIT (11) (1987) 759.
38. [87Kno] O. Knotek and T. Leyendecker, J. Solid State Chem. 70 (1987) 318.
39. [87McA] A.J. McAlister, J.L. Murray, Bull. Alloy Phase Diag. 8 (1987) 438.
40. [87Mur] J.L. Murray (ed), "Phase Diagrams of Binary Titanium Alloys," ASM International, (1987).
41. [87Pit] K.S. Pitzer "A thermodynamic model for aqueous solutions of liquid-like density," in: Thermodynamic Modeling of Geological Materials: Minerals, Fluids, and Melts, Rev. Mineral. 17, I.S.E. Carmichael and H.P. Eugster (eds.), p. 97, Mineralogical Society of America, (1987).
42. [87Rap] M. Rappaz and Ph. Thévoz, Acta Metall. 35 (1987) 1487.
43. [87Ric] P. Richet and Y. Bottinga, Rev. Geophysics 24 (1986) 1.
44. [87Wan] D.H. Wang, in: Proc. 172nd Meeting of the Electrochemical Society, Hawaii, Oct. 1987, Electrochem. Soc., 2, p. 575, (1987).
45. [87Wea] J.H. Weare "Models of mineral solubility in concentrated brines with application to field observations," in: Thermodynamic Modeling of Geological Materials: Minerals, Fluids, and Melts, I.S.E. Carmichael and H.P. Eugster (eds.), Rev. Mineral. 17, p. 143, Mineralogical Society of America, (1987).
46. [88And] T.J. Anderson, "Examples of Chemical Engineering Principles Applied to the Growth of Semiconductors," in: Chem. Eng. Ed. in a Changing Environment, S.I. Sandier and B.A. Finlayson (eds.), p. 311, AIChE Publ., (1988).
47. [88Ber] R.G. Berman, J. Petrol. 29 (1988) 445.
48. [88Cos] A. Costa e Silva and P.R. Mei, "Steels and Specialty Alloys" (in Portuguese), Eletrometal, Sumare, Brasil, (1988).
49. [88Nay] A.A. Nayeb-Hashemi, J.B. Clark (eds.), "Phase Diagrams of Binary Magnesium Alloys," ASM International, (1988).
50. [88Rap] M. Rappaz and D.M. Stephanescu, in: CASTING, ASM Handbook, Vol. 15, p. 883, ASM, Metals Park, OH, (1988).
51. [88Sch] H. Schüle and W.-I. Ratzel, "Technische Keramik", 1st Edn., Vulkan, Essen, (1998).
52. [88Wan] D.H. Wang and L. Guo, Thin Solid Films 158 (1987) L39.
53. [89And] T.J. Anderson, "Liquid Phase Epitaxy and Phase Diagrams of Compound Semiconductors," in: Advances in Chemistry Series No. 221: Chemical Engineering in Electronic Materials Processing, p. 105, (1989).
54. [89Rap] M. Rappaz, Int. Mat. Rev. 34 (1989) 93.
55. [89Sha] Y.G. Sha and R.F. Brebrick, J. Electron. Mater. 18 (1989) 421.
56. [89Ues] Y. Ueshima, H. Yuyama, S. Mizoguchi, and H. Kajioka, Tetsu-to-Hagane 75(3) (1989) 501.
57. [89Zol] M.E. Zolensky, W.L. Bourcier, and J.L. Gooding, Icarus 78 (1989) 411.
58. [90And] J.-O. Andersson, L. Höglund and B. Jönsson, in: Fundamentals and Applications of Ternary Diffusion, G.R. Purdy (ed.), p.153, Pergamon, New York, (1990).
59. [90Bak] L Bäckerud, G. Chai, J. Tamminen, "Solidification Characteristics of Aluminium Alloys, Vol. 2: Foundry Alloys," Skanaluminium, (1990).
60. [90Bro] P. L. Brown, A. Haworth, S. M. Sharland, and C. J. Tweed, "HARPHRQ: An extended version of the geochemical code PHREEQE," NIREX Safe Studies Rept. NSS-R. 188, Harwell Laboratory, Oxfordshire, U. K., (1990).
61. [90Eri] G. Eriksson and K. Hack, Metall. Trans. B 21B (1990) 1013.
62. [90Gio] B. Giovanola and W. Kurz, Metall. Trans. A 21A (1990), 260.
63. [90Holl] P.H. Holloway and T.J. Anderson (eds.), "Compound Semiconductors: Growth, Processing and Devices," CRC Press, Boca Raton, FL (1990).
64. [90Hol2] T.J.B. Holland and R. Powell, J. metamor. Geol. 8 (1990) 89.
65. [90Lan] R. L. Lange, and I. S. E. Carmichael, "Thermodynamic properties of silicate liquids with emphasis on density, thermal expansion and compressibility," in: Modern Methods of Igneous Petrology: Understanding Magmatic Processes, J. Nicholls and J. K. Russell (eds.). Rev. Mineral. 24, p. 25, (1990).
66. [90Loo] F.J.J. van Loo, Prog. Solid St. Chem., 20, (1990) 47.
67. [90Mas] T.B. Massalski (ed), "Binary Alloy Phase Diagrams," 2nd Edn., ASM International, (1990).
68. [90Mys] B.O. Mysen, Earth Sci. Rev. 27 (1990) 281.
69. [90Nie] R.L. Nielsen, "Simulation of igneous differentiation processes," in: Modern Methods of Igneous Petrology: Understanding Magmatic Processes, J. Nicholls and J.K. Russell (eds.), Rev. Mineral. 24, p. 65, (1990).
70. [90Pet] G. Petzow, G. Effenberg (eds.), "Ternary Alloys," VCH Weinheim & New York, Vol. 3, (1990), see also Vol. 4, (1991), Vol. 5, (1992), Vol. 6, (1993), Vol. 7, (1993), Vol. 8, (1993).
71. [90Spe] P.J. Spencer and H. Holleck, High Temp. Science 27 (1990) 295.
72. [91Ber] R.G. Berman, Canad. Mineral. 29 (1991) 833.
73. [91Cao] W.D. Cao, R.L. Kennedy, and M.P. Willis, in: Superalloys 718, 625 and Various Derivatives, E.A. Loria (ed.), p. 147, TMS, Warrendale, PA, (1991).
74. [91Dav] R.H. Davies, A.T. Dinsdale, S.M. Hodson, J.A. Gisby, N.J. Pugh, T.I. Barr, and T.G. Chart, "MTDATA - The NPL Databank for Meatllurgical Thermochemistry," in: User Aspects of Phase Diagrams, F. H. Hayes (ed.), p. 140, The Institute of Metals, London, (1991).
75. [91Emr] A. Emrén, Radiochim. Acta 53 (1991) 473.
76. [91Fal] W.E. Falck, Comp. Geosci. 17 (1991) 1219.
77. [91Ker] D.M. Kerrick, in: Contact Metamorphism, Rev. Mineral. 26, p. 847, Mineralogical Society of America, (1991).
78. [91Nak] T. Nakakita, K. Shinchi, and T. Tagami, "End point control system at Nippon Steel Corporation", Sublance and Dynamic Control Steelmaking Conference, Hoogovens, Hoogovens IJmuiden (1991).
79. [91Pet] G. Petzow and K.G. Nickel, "Phase Diagrams: Tools for the Development of Advanced Ceramics," in: User Aspects of Phase Diagrams, F. H. Hayes (ed.), p. 40, The Institute of Metals, London, (1991).
80. [92Agr] J. Ågren, ISIJ International, 32 (1992) 291.
81. [92And] J.-O. Andersson and J. Ågren, J. Appl. Phys. 72 (1992) 1350.
82. [92Bat] T.P. Battle, International Mater. Rev. 37(6) (1992) 249.
83. [92Bel] A.B. Belonoshko, P. Shi, and S.K. Saxena, Comp. Geosci. 18 (1992) 1267.
84. [92Cor] H. Cordes and R. Schmid-Fetzer, Z. Metallkde. 83 (1992) 601.
85. [92Gat] C. Gatellier, H. Gaye, J. Lehmann, J. Bellot, and M. Moncel, La Revue de Metallurgie (4) (1992) 362.
86. [92Gor] T.M. Gordon, Geochim. Cosmochim. Acta 56 (1992) 1793.
87. [92Har] W.J. Harrison and G.D. Thyne, Geochim. Cosmochim. Acta 56 (1992) 565.
88. [92Hil] M. Hillert and S. Jonsson, Z.Metallkde 83 (1992) 714.
89. [92Ita] J. Ita and L. Stixrude, J. Geophys. Res. 97(B5) (1992), 6849.
90. [92Jan] A. Jansson, Metall. Trans. A 23A (1992) 2953.
91. [92Joh] J.W. Johnson, E.H. Oelkers, and H.C. Helgeson, Comp. Geosci. 18 (1992) 899.
92. [92Kno] W. v. D. Knoop, B. Deo, A.B. Snoeijer, G. v. Unen, and R. Boom, "A dynamic slag-droplet model for the steelmaking process," 4th International Conference on Molten Slags and Fluxes, Sendai, Japan, ISIJ, (1992).
93. [92Li] X.L. Li, R. Hillel, F. Teyssandier, S.K. Choi, and F.J.J. van Loo, Acta Metall. 40, (1992) 3149.
94. [92Mat] T. Matsumiya, Mater. Trans. JIM 33(9) (1992) 783.
95. [92Zha] M.-X. Zhang, K.-C. Hsieh, J. DeKock, and Y.A. Chang, Scr. Metall. 27 (1992) 1361.
96. [93Cho] K. C. Chou, U.B. Pal, and R.G. Reeddy, ISIJ International 33(8) (1993), 862.
97. [93Deo] B. Deo and R. Boom, "Fundamentals of steelmaking metallurgy," Prentice Hall, (1993).
98. [93Fle] P. Fletcher, "Chemical Thermodynamics for Earth Scientists," Longman Scientific & Technical, Hong Kong, (1993).
99. [93Gen] C. Gente, M. Oehring, and R. Bormann, Phys. Rev. B 48 (1993), 13244.
100. [93Hum] G. Humpston and D.M. Jacobson, "Principles of Soldering and Brazing," ASM International, Materials Park, Ohio (1993).
101. [93Kub] O. Kubaschewski, C.B. Alcock, and P.J. Spencer, " Materials Thermochemistry," Pergamon Press, Oxford, (1993).
102. [93Sax] S.K. Saxena, N. Chatterjee, Y. Fei, and G. Shen, "Thermodynamic Data on Oxides and Silicates," Springer-Verlag, Berlin, Heidelberg, New York, (1993).
103. [93Sel] M. Selleby, "Thermodynamic Modelling and Evaluation of the Ca-Fe-O-Si System," Royal Institute of Technology, KTH, Stockholm, (1993).
104. [93Shi] P. Shi, "Thermodynamics of the C-H-O-S fluids with some applications," Unpublished Ph. D. Thesis, Uppsala University, Sweden, (1993).
105. [93Spe] F.S. Spear, "Metamorphic phase equilibria and pressure-temperature-time paths," Mineralogical Society of America, Washington, D.C., p. 799, (1993).
106. [93Sto] H. Stolten, P.J. Spencer, and D. Neuschütz, J. Chim. Phys. 90 (1993) 209.
107. [93Via] P.T. Vianco and D.R. Frear, JOM 45 (1993) 14.
108. [93Wen] H. Wenzl, W.A. Oates, and K. Mika, in: Handbook of Crystal Growth, D.T.J. Hurle (ed.), Vol. 1A, p. 103, North-Holland, Amsterdam, (1993).
109. [94Ans] I. Ansara, C. Chatillon, L. Lukas, T. Nishizawa, H. Ohtani, K. Ishida, M. Hillert, B. Sundman, B.B. Argent, A. Watson, T.G. Chart, and T.J. Anderson, CALPHAD 18 (1994) 117.
110. [94Bor] R. Bormann, "Kinetics of Interface Reactions in Polycrystalline Thin Films," in: Polycrystalline Thin Films, K. Barmak, M.A. Parker, J.A. Floro, R. Sinclair, and D.A. Smith (eds.), Mat. Res. Soc. Symp. Proc. 343, p. 169, (1994).
111. [94Eri] G. Eriksson, H. Sippola, and B. Sundman, "A Proposal for a General Thermodynamic Software Interface," in: Proceedings of the Colloquium on Process Simulation, Helsinki University of Technology, Report TKK-V-B99, p. 67, (1994).
112. [94Gan] Ch.-A. Gandin and M. Rappaz, Acta Metall. Mater. 42 (1994) 2233.
113. [94Hal] B. Hallstedt, M. Hillert, M. Selleby, and B. Sundman, CALPHAD 18 (1994) 31.
114. [94Han] Q. Han and R. Schmid-Fetzer, Mater. Sci. Eng. B22 (1994) 141.
115. [94Ogi] S. Ogibayashi, "Advances in technology of oxide metallurgy," in: Nippon Steel Technical Report 61, p. 70, (1994).
116. [94Pow] R. Powell and T.J.B. Holland, Amer. Mineral. 79 (1994) 120.
117. [94Sau] N. Saunders, presented at Symposium on Applications of Thermodynamics in the Synthesis and Processing of Materials, Materials Week 1994, Rosemont, IL.
118. [95Ans] I. Ansara, "Thermochemical Database for Light Metal Alloys," COST 507, Concerted Action on Materials Sciences, European Commission, DG XII, Luxembourg, (1995).
119. [95Boe] W.J. Boettinger, U.R. Kattner, S.R. Coriell, Y.A. Chang, and B.A. Mueller, in: Modelling of Casting, Welding and Advanced Solidification Processes VII, M. Cross and J. Campbell (eds.), p. 649, TMS, Warrendale, PA, (1995).
120. [95Bri] J. K. Brimacombe and I. Samarasekera, "The Continuous Casting of Steel," a Short Course presented at UFF, UFF/ABM, Volta Redonda, RJ, Brasil, (1995).
121. [95Bus] R. Busch, F. Gaertner, C. Borchers, P. Haasen, and R. Bormann, Acta metall. mater. 43 (1995) 3467.
122. [95For] R.K. Foran, T. Hansen, and B. Mueller, in: Modelling of Casting, Welding and Advanced Solidification Processes VII, M. Cross and J. Campbell (eds.), p. 771, TMS, Warrendale, PA, (1995).
123. [95GM] M.S. Ghiorso and R.O. Sack, Contrib. Mineral. Petrol. 119 (1995) 197.
124. [95Goe] F. Goesmann and R. Schmid-Fetzer, Semicond. Sci. Technol. 10 (1995) 1652 and 11 (1996) 461.
125. [95Ito] T. Ito, J. Appl. Phys. 77 (1995) 4845.
126. [95Kou] P. Koukkari, "A Physico-Chemical Reactor Calculation by Successive Stationary States," Acta Polytechn. Scand., Chem. Tech. Series No. 224, (1995).
127. [95Lin] C.-F. Lin, Y.A. Chang, N. Pan, J.-W. Huang, and T.F. Kuech, Appl. Phys. Letters 67 (1995) 3587.
128. [95Mat] K. Matsuura, M. Kudoh, and T. Ohmi, ISIJ International 35(6) (1995) 624.
129. [95Moh] S.E. Mohney and Y.A. Chang, J. Appl. Phys. 78 (1995) 1342.
130. [95Mys] B.O. Mysen, Eur. J. Mineral. 7 (1995) 745.
131. [95Oel] E.H. Oelkers, H.C. Helgeson, and V.A. Pokrovskii, J. Phys. Chem. Ref. Data 24 (1995) 1401.
132. [95Ohs] K. Ohsasa, S. Nakaue, M. Kudoh, and T. Narita, ISIJ International 35(6) (1995) 629.
133. [95Ste] D. M. Stefanescu, ISIJ International 35(6) (1995) 637.
134. [95Tho] B. G. Thomas, ISIJ International 35(6) (1995) 737.
135. [95Tie] T.-Y. Tien, "Use of Phase Diagrams in the Study of Silicon Nitride Ceramics," in: Phase Diagrams in Advanced Ceramics, A.M. Alper (ed.), p. 127, Academic Press, San Diego, (1995).
136. [95Vil] P. Villars, A. Prince, H. Okamoto, "Handbook of Ternary Alloy Phase Diagrams," Vol. 3, ASM International, (1995).
137. [95Wen] R.M. Wentzcovitch, N.L. Ross, and G.D. Price, Phys. Earth Planet. Inter 90 (1995) 101.
138. [96Agr] J. Agren, "Multicomponent Diffusion in Compound Steel," in: The SGTE Casebook, K. Hack (ed.), p. 209, The Institute of Materials, London, (1996).
139. [96Ann] S. Annaji, R.Y. Lin, and S.K. Wu, "Joining of Titanium Aluminides using Al-foil," in: Design Fundamentals of High Temperature Composites, Intermetallics and Metal-Ceramic Systems, R.Y. Lin, Y.A. Chang, R.G. Reddy, and C.T. Liu (eds.), p. 125, The Minerals, Metals & Materials Society, Warrendale, PA., (1996).
140. [96Bal] R.G.J. Ball, P.K. Mason, and M.A. Mignanelli, "Application of Phase Equilibrium Calculations to the Analysis of Severe Accidents in Nuclear Reactors," in: The SGTE Casebook, K. Hack (ed.), p. 135, The Institute of Materials, London, (1996).
141. [96Barl] T.I. Barry and A.T.Dinsdale, "Hot Salt Corrosion of Superalloys," in: The SGTE Casebook, K. Hack (ed.), p. 56, The Institute of Materials, London, (1996).
142. [96Bar2] T.I. Barry, A.T. Dinsdale, S.M. Hodson, and J.R. Taylor, "Pyrometallurgy of Copper-Nickel-Iron Sulphide Ores: The Calculation of Distribution of Components between Matte, Slag, Alloy and Gas Phases," in: The SGTE Casebook, K. Hack (ed.), p. 151, The Institute of Materials, London, (1996).
143. [96Bel] A. B. Belonoshko and L. S. Dubrovinsky, Geochim. Cosmochim. Acta 60 (1996) 1645.
144. [96Bha] K. Bhanumurthy and R. Schmid-Fetzer, Mater. Sci. Eng. A A220 (1996) 35.
145. [96Cha] C.H. Chang, A. Davydov, B.J. Stanbery, and T.J. Anderson, "Thermodynamic Assessment of the Cu-In-Se System and Application to Thin Film Photovoltaics," in: Proc. 25th PVSC, p. 849, (1996).
146. [96Cra] M.B. Crawford, Comp. Geosci. 22 (1996) 109.
147. [96Eng] A. Engström, "Long range diffusion and microstructural evolution in multiphase alloys," Thesis, KTH, Sweden (1996).
148. [96Eri] G. Eriksson and K. Hack, "Production of Metallurgical Grade Silicon in an Electric Arc Furnace," in: The SGTE Casebook, K. Hack (ed.), p. 200, The Institute of Materials, London, (1996).
149. [96Fer] A. Femández Guillermet, "Using Calculated Phase Diagrams in the Selection of the Composition of Cemented WC Tools with a Co-Fe-Ni Binder Phase," in: The SGTE Casebook, K. Hack (ed.), p. 77, The Institute of Materials, London, (1996).
150. [96Gus] P. Gustafson, "Computer Assisted Development of High Speed Steels," in: The SGTE Casebook, K. Hack (ed.), p. 70, The Institute of Materials, London, (1996).
151. [96Hac] K. Hack (ed.), "The SGTE Casebook," The Institute of Materials, London, (1996).
152. [96Hil1] M. Hillert and C. Qiu, "Prediction of Loss of Corrosion Resistance in Austenitic Stainless Steels," in: The SGTE Casebook, K. Hack (ed.), p. 85, The Institute of Materials, London, (1996).
153. [96Hil2] M. Hillert and S. Jonsson, "Prediction of a Quasitenary Section of a Quaternary Phase Diagram," The SGTE Casebook, K. Hack (ed.), p. 99, The Institute of Materials, London, (1996).
154. [96Hol] T. Hohn and J. Ågren, "The Carbon Potential during Heat Treatment of Steel," in: The SGTE Casebook, K. Hack (ed.), p. 176, The Institute of Materials, London, (1996).
155. [96Kao] C.R. Kao, J. Woodford, and Y.A. Chang, "Reactive Diffusion between Silicon and Niobium Carbide, Application to the in-situ Synthesis of Silicon carbide / Niobium Disilicide Composite," in: Design Fundamentals of High Temperature Composites, Intermetallics and Metal-Ceramic Systems, R.Y. Lin, Y.A. Chang, R.G. Reddy, and C.T. Liu (eds.), p. 3, The Minerals, Metals & Materials Society, Warrendale, PA, (1996).
156. [96Kat] U.R. Kattner, W.J. Boettinger, and S.R. Coriell, Z. Metallkde. 87 (1996) 522.
157. [96Kor] J. Korb and K. Hack, "Calculation of the Concentration of Iron and Copper Ions in Aqueous Sulphuric Acid Solutions as a Function of the Electrode Potential," in: The SGTE Casebook, K. Hack (ed.), p. 118, The Institute of Materials, London, (1996).
158. [96Kou] A. Koukitu, N. Takahashi, T. Taki, and H. Seki, Jpn. J. Appl. Phys. 35 (1996) L673.
159. [96Miz] S. Mizoguchi, "A study on segregation and oxide inclusions for the control of steel properties," University of Tokyo, Tokyo, (1996).
160. [96Nic] K.G. Nickel, H.L. Lukas, and G. Petzow, "High Temperature Corrosion of SiC in Hydrogen-Oxygen Environments," in: The SGTE Casebook, K. Hack (ed.), p. 163, The Institute of Materials, London, (1996).
161. [96Pau] M. Paulasto, F.J.J. van Loo, and J.K. Kivilahti, "On the Metallurgy of Active Brazing of Silicon Nitride," in: Design Fundamentals of High Temperature Composites, Intermetallics and Metal-Ceramic Systems, R.Y. Lin, Y.A. Chang, R.G. Reddy, and C.T. Liu (eds.), p. 113, The Minerals, Metals & Materials Society, Warrendale, PA, (1996).
162. [96Ric] A. von Richthofen and R. Domnick, Thin Solid Films 283 (1996) 37.
163. [96Sax] S.K. Saxena, Geochim. Cosmochim. Acta 60 (1996) 2379.
164. [96Sch] R. Schmid-Fetzer, "Fundamentals of Bonding by Isothermal Solidification for High Temperature Semiconductor Applications," in: Design Fundamentals of High Temperature Composites, Intermetallics and Metal-Ceramic Systems, R.Y. Lin, Y.A. Chang, R.G. Reddy, and C.T. Liu (eds.), p. 75, The Minerals, Metals & Materials Society, Warrendale, PA, (1996).
165. [96Sei1] H.J. Seifert and F. Aldinger, Z. Metallkde. 87 (1996) 841.
166. [96Sei2] H.J. Seifert, H.L. Lukas, and G. Petzow, "Computational Thermodynamics in Materials Science," in: Design Fundamentals of High Temperature Composites, Intermetallics and Metal-Ceramic Systems, R.Y. Lin, Y.A. Chang, R.G. Reddy, and C.T. Liu (eds.), p. 297, The Minerals, Metals & Materials Society, Warrendale, PA, (1996).
167. [96Sui] H. Suito and R. Inoue, ISIJ International 36(5) (1996) 528.
168. [96Tur] E. Turkdogan, "Principles of Steelmaking," The Institute of Materials, London, (1996).
169. 2 Thin Films," in: The SGTE Casebook, K. Hack (ed.), p. 108, The Institute of Materials, London, (1996).
170. [96Wei] F. Weitzer, P. Rogl, F.H. Hayes, J.A.G. Robinson, in: Werkstoff Woche "96, Materialwissenschaftliche Grundlagen, F. Aldinger and H. Mughabri (eds.), p. 185, Deutsche Gesellschaft für Materialkunde, (1997).
171. [97Ban] D.K. Banerjee, M.T. Samonds, U.R. Kattner, and W.J. Boettinger, "Coupling of Phase Diagram Calculations for Multicomponent Alloys with Solidification Micromodels in Casting Simulation Software," In: SP97 Proc. 4th Intl. Conf. Solidification Processing, J. Beech and H. Jones (eds), p. 354, University of Sheffield, UK, (1997).
172. [97Eri] G. Eriksson, P.J. Spencer, and D. Neuschütz, "Comparison of calculated and experimental dioxin levels in the off-gas of a sinter plant," in: High Temperature Chemistry IX, K.E. Spear (ed.), p. 278, The Elecrochemical Society, (1997).
173. [97Ghi] M.S. Ghiorso, Ann. Rev. Earth Planet. Sci. 25 (1997) 221.
174. [97Got] M. Gottschalk, Eur. J. Mineral. 9 (1997) 175.
175. [97Hil] M. Hillert, B. Burton, K. S. Saxena, S. Degterov, K.C. Hari Kumar, H. Ohtani, F. Aldinger, and A. Kussmaul, CALPHAD 21 (1997) 247.
176. [97Kra] T. Kraft and Y.A. Chang, JOM 49(12) (1997) 20.
177. [97Leel] B.-J. Lee, N.M. Hwang, and H.M. Lee, Acta Mater. 45 (1997) 1867.
178. [97Lee2] B.-J. Lee, Acta Mater. 45 (1997) 3993.
179. [97Meu] B. Meurer, P. Spencer, and D. Neuschütz, J. Chim. Phys. 9 (1997) 889.
180. [97Oer] L.C. Oertel and A. Costa e Silva, "Applications of thermodynamic modeling in the prediction of slag-metal equilibrium in steelmaking" (in Portuguese). XXVIII Seminario sobre Fusão, Refino e Solidificação dos Aços, Campinas, SP, Campinas, SP, ABM, São Paulo, SP, (1997).
181. [97Sch] M.C. Schneider, J.P. Gu, C. Beckermann, W.J. Boettinger, and U.R.Kattner, Metall. Mater. Trans. A 28A (1997) 1517.
182. [97Swa] V. Swamy and L. S. Dubrovinsky, Geochim. Cosmochim. Acta 61 (1997) 1181.
183. [97Tut] A.V. Tutbalin and D.V. Grichuk, Geochem. Intern. 35 (1997) 972.
184. [97Yoo] S.-W. Yoon, J.R. Soh, H.M. Lee, and B.-J. Lee, Acta Mater. 45 (1997) 951.
185. [98Ans] I. Ansara, A.T. Dinsdale, M.H. Rand, "COST 507: Definition of Thermochemical and Thermophysical Properties to Provide a Database for the Development of New Light Alloys," Vol. 2, European Commission, DG XII, Brussels, (1998).
186. [98Bral] J. Brandt and L. Nilsson, MECH. COHES.-FRICT. MATER. 3(1998).
187. [98Bra2] J. Brandt, "On constitutive modelling of the compaction and sintering of cemented carbides," Thesis, Linkoping University, Sweden (1998).
188. [98Buc] F.v. Buch, B.L. Mordike, A. Pisch, and R. Schmid-Fetzer, Mater. Sci. Eng. A (1998) accepted.
189. [98Cas] R. N. Castro and A. Costa e Silva, "Dynamic modeling of mixed blow converter (in Portuguese)," to be published in XXIX Seminario sobre Fusão, Refino e Solidificação dos Aços, SP, Sao Paulo, Brasil, ASM, São Paulo, SP (1998).
190. [98Cha] T.G. Chart, "A Summary of the COST 507 Action and Examples of Practical Applications of the Database," in: COST 507: Definition of Thermochemical and Thermophysical Properties to Provide a Database for the Development of New Light Alloys, Vol. 1, p. 15, European Commission, DG XII, Brussels, (1998).
191. [98Che] Q. Chen, M. Hillert, B. Sundman, W.A. Oates, S.G. Fries, and R. Schmid-Fetzer, J. Electron. Mater. 27 (1998) 961.
192. [98Cre] R. Cremer, M. Witthaut, and D. Neuschütz, in: Value Addition Metallurgy, W.D. Cho, and H.Y. Sohn (eds.), p. 249, The Minerals, Metals & Materials Society, (1998).
193. [98Gra] U. Grafe, D. Ma, A. Engström, and S.G. Fries, "Calculation of Microsegrgation for the Directionally Solidified SuperAlloy CMSX 4 using a Pseudo 2-Dimensional Model," in: Modeling of Casting, Welding, and Advanced Solidification Processes VIII, B.G. Thomas, and C. Beckermann (eds.), p. 227, The Mineral, Metals & Materials Society, (1998).
194. [98Dav] R. H. Davies, A. T. Dinsdale, J. A. Gisby, "MTDATA Handbook: Application Interface Programming Guide", CMMT, National PhysicalLaboratory, UK, (1998).
195. [98Jan] A. Jansson, T.G. Chart, "A Thermochemical Assessment of Data for the Al-rich Corner of the Al-Fe-Mn System, and a Revision of Data for the Al-Mn System," in: COST 507: Definition of Thermochemical and Thermophysical Properties to Provide a Database for the Development of New Light Alloys, Vol. 1, p. 257, European Commission, DG XII, Brussels, (1998).
196. [98McC] T.M. McCollom, and E.L. Shock, J. Geophys. Res. 103 (B1) (1998) 547.
197. [98Ran] M.H. Rand, P. Kolby, T.G. Chart, "A Thermochemical Assessment of Data for the Al-rich Corner of the Al-Mn-Si System," in: COST 507: Definition of Thermochemical and Thermophysical Properties to Provide a Database for the Development of New Light Alloys, Vol. 1, p. 246, European Commission, DG XII, Brussels, (1998).
198. [98Sch] R. Schmid-Fetzer and K. Zeng, Metall. Mater. Trans. A 28A (1997) 1949.
199. [98Sei] H.J. Seifert, H.L. Lukas, and F. Aldinger, Ber. Bunsenges. Phys. Chem. 102 (1998) 1309.
200. [98Spe] P.J. Spencer, G. Eriksson, and A.von Richthofen, in: Proc. CODATA ' 94, Chambéry, France, Sept. 1994, Springer, (1998).
201. [98Zen] K. Zeng, R. Schmid-Fetzer, and P. Rogl, J. Phase Equilibria 19 (1998) 124.