Zirconia-silica-carbon coatings on ceramic fibers

Journal of the American Ceramic Society

Volumn 87, Issue 10, 2004, Pages 1967-1976

  Boakye, Emmanuel E ^a   Hay, Randall S ^b   Petry, M Dennis ^a   Parthasarathy, Triplicane A ^a  

^a UES INC   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CERAMIC MATRIX COMPOSITES; DECOMPOSITION; DEGRADATION; HEAT TREATMENT; MATHEMATICAL MODELS; SILICA; THERMOGRAVIMETRIC ANALYSIS; X RAY DIFFRACTION;

DEIONIZATION; FIBER COATINGS; MOLAR RATIOS;

CERAMIC FIBERS;

EID: 8644279597     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1151-2916.2004.tb06348.x     Document Type: Review

References (77)

1. R. J. Kerans, R. S. Hay, T. A. Parthasarathy, and M. K. Cinibulk, "Interface Design for Oxidation-Resistant Ceramic Composites," J. Am. Ceram. Soc., 85 [11] 2599-632 (2002).
2. K. A. Keller, T. Mah, T. A. Parthasarathy, E. E. Boakye, P. Mogilevsky, and M. K. Cinibulk, "Effectiveness of Monazite Coatings in Oxide/Oxide Composites after Long-Term Exposure at High Temperature," J. Am. Ceram. Soc., 86 [2] 325-32 (2003).
3. C. Kaya, E. G. Butler, A. Selcuk, A. R. Boccaccini, and M. H. Lewis, "Mullite (Nextel™ 720) Fibre-Reinforced Mullite-Matrix Composites Exhibiting Favourable Thermomechanical Properties," J. Eur. Ceram. Soc., 22, 2333-42 (2002).
4. P. E. D. Morgan and D. B. Marshall, "Ceramic Composites of Monazite and Alumina," J. Am. Ceram. Soc., 78 [6] 1553-63 (1995).
5. J. B. Davis, D. B. Marshall, and P. E. D. Morgan, "Monazite- Containing Oxide-Oxide Composites," J. Eur. Ceram. Soc., 20 [5] 583-87 (2000).
6. C. G. Levi, J. Y. Yang, B. J. Dalgleish, F. W. Zok, and A. G. Evans, "Processing and Performance of an All-Oxide Ceramic Composite," J. Am. Ceram. Soc., 81 [8] 2077-86 (1998).
7. M. A. Mattoni, J. Y. Yang, C. G. Levi, and F. W. Zok, "Effects of Matrix Porosity on the Mechanical Properties of a Porous-Matrix, All-Oxide Ceramic Composite," J. Am. Ceram. Soc., 84 [11] 2594-602 (2001).
8. J. M. Staehler and L. P. Zawada, "Performance of Four Ceramic-Matrix Composite Divergent Flap Inserts Following Ground Testing on an F110 Turbofan Engine," J. Am. Ceram. Soc., 83 [7] 1727-38 (2000).
9. E.A. V. Carelli, H. Fujita, J. Y. Yang, and F. W. Zok, "Effects of Thermal Aging on the Mechanical Properties of a Porous-Matrix Composite," J. Am. Ceram. Soc., 85 [3] 595-602 (2002).
10. W.-C. Tu, F. F. Lange, and A. G. Evans, "Concept for a Damage-Tolerant Ceramic Composite with 'Strong' Interfaces," J. Am. Ceram. Soc., 79 [2] 417-24 (1996).
11. L. U. J. T. Ogbuji, "A Porous, Oxidation-Resistant Fiber Coating for CMC Interface," Ceram. Eng. Sci. Proc., 16 [4] 497-505 (1995).
12. 4 Minicomposite," J. Mater. Res., 12 [5] 1287-96 (1997).
13. E. Boakye, R. S. Hay, and M. D. Petry, "Mixed Carbon-Aluminum Oxide Coatings from Aqueous Sols and Solutions"; pp 363-68 in Aqueous Chemistry and Geochemistry of Oxides, Oxyhydroxides, and Related Materials. Edited by J. Voight, T. Wood, B. Bunker, and B. Casey. Materials Research Society, Pittsburgh, PA, 1997.
14. R. S. Hay, M. D. Petry, K. A. Keller, M. K. Cinibulk, and J. R. Welch, "Carbon and Oxide Coatings on Continuous Ceramic Fibers"; pp. 377-82 in Ceramic Matrix Composites - Advanced High-Temperature Structural Materials, Materials Research Society Symposium Proceedings, Vol. 365. Edited by R. A. Lowden, M. K. Ferber, J. R. Hellmann, and S. G. DiPetro. Materials Research Society, Pittsburgh, PA, 1995.
15. 2 and Monazite Coatings using Nextel™ 720 Fiber-Reinforced Blackglas-Matrix Minicomposites," J. Am. Ceram. Soc., 84 [7] 1526-32 (2001).
16. M. I. O'Brien and B. W. Sheldon, "Porous Alumina Coating with Tailored Fracture Resistance for Alumina Composites," J. Am. Ceram. Soc., 82 [12] 3567-74 (1999).
17. J. B. Davis, A. Kristoffersson, E. Carlstrom, and W. I. Clegg, "Fabrication and Crack Deflection in Ceramic Laminates with Porous Interlayers," J. Am. Ceram. Soc., 83 [10] 2369-74 (2000).
18. B. F. Sorensen and A. Horsewell, "Crack Growth along Interfaces in Porous Ceramic Layers," J. Am. Ceram. Soc., 84 [9] 2051-59 (2001).
19. Y. Kanno, "Thermodynamic and Crystallographic Discussion of the Formation and Dissociation of Zircon," J. Mater. Sci., 24, 2415-20 (1989).
20. M. Trojan, "Synthesis of Gray Zirconium Silicate Pigments from Zircon Mineral," J. Am. Ceram. Soc., 73 [10] 2892-95 (1990).
21. E. C. Subbarao, D. K. Agrawal, H. A. McKinstry, C. W. Sallese, and R. Roy, "Thermal Expansion of Compounds of Zircon Structure," J. Am. Ceram. Soc., 73 [5] 1246-52 (1990).
22. R. N. Singh, "High-Temperature Mechanical Properties of a Uniaxially Reinforced Zircon-Silicon Carbide Composite," J. Am. Ceram. Soc., 73 [8] 2399-406 (1990).
23. D. Singh, J. P. Singh, and M. J. Wheeler, "Mechanical Behavior of SiC(f)/SiC Composites and Correlation to in Situ Fiber Strength at Room and Elevated Temperatures,"J Am. Ceram. Soc., 79 [3] 591-96 (1996).
24. S. Kumar and R. N. Singh, "Effects of Fiber-Coating Properties on the Crack Deflection and Penetration in Fiber-Reinforced Ceramic Composites," Acta Mater., 45 [11] 4721-31 (1997).
25. E. B. Watson and D. J. Cherniak, "Oxygen Diffusion in Zircon," Earth Planet. Sci. Lett., 148, 527-44 (1997).
26. D. J. Cherniak, J. M. Hanchar, and E. B. Watson, "Diffusion of Tetravalent Cations in Zircon," Contrib. Mineral. Petrol., 127, 383-90 (1997).
27. D. J. Cherniak, J. M. Hanchar, and E. B. Watson, "Rare-Earth Diffusion in Zircon," Chem. Geol., 136, 289-301 (1996).
28. U. Anandakumar and R. N. Singh, "Creep Response of Fiber-Reinforced Ceramic Composites," Ceram. Eng. Sci. Proc., 20B [4] 451-58 (1999).
29. 4," J. Eur. Ceram. Soc., 21, 1055-60 (2001).
30. W. J. Baldwin, Zircon and Zirconates; p. 167. Academic Press, New York, 1970.
31. 2 Powders," J. Mater. Sci., 31, 6089-94 (1996).
32. 4) from Amorphous Silica and Amorphous Zirconia," J. Cryst. Growth, 125, 223-28 (1992).
33. R. S. Hay, E. E. Boakye, M. D. Petty, Y. Berta, K. V. Lehmden, and J. Welch, "Grain Growth and Tensile Strength of 3M Nextel 720 after Thermal Exposure," Ceram. Eng. Sci. Proc., 20 [3] 153-63 (1999).
34. T. Yamamura, S. Masaki, T. Ishikawa, M. Sato, M. Shibuya, and K. Kumagawa, "Improvement of Si-Ti(Zr)-C-O Fiber and a Precursor Polymer for High-Temperature CMC," Ceram. Eng. Sci. Proc. 17, 184 (1996).
35. M. Takeda, J. Sakamoto, A. Saeki, and H. Ichikawa, "Mechanical and Structural Analysis of Silicon Carbide-Fiber Hi-Nicalon Type S," Ceram. Eng. Sci. Proc. 17, 35 (1996).
36. T. Shimoo, H. Takeuchi, and K. Okamura, "Thermal Stability of Polycarbosilane-Derived Silicon Carbide-Fibers under Reduced Pressures," J. Am. Ceram. Soc., 84 [3] 566-70 (2001).
37. Y. Xu, L. Cheng, L. Zhang, H. Yin, and X. Yin, "Microstructure and Mechanical Properties of Three-Dimensional Textile Hi-Nicalon SiC/SiC Composites by Chemical Vapor Infiltration," J Am. Ceram. Soc., 85 [5] 1217-21 (2002).
38. A. H. A. K. Bhattacharya and K. K. Mallick, "An X-ray Diffraction and NMR Study into the Mechanism of Zircon Formation from Aqueous Sols," J. Mater. Sci., 31, 5873-76 (1996).
39. V. I. Matkovich, "Formation of Zircon from Zirconium Dioxide and Silicon Dioxide in the Presence of Vanadium Pentoxide," J. Am. Ceram. Soc., 44 [3] 128-30 (1961).
40. M. Shoyama, N. Matsumoto, T. Hashimoto, H. Nasu, and K. Kamiya, "Sol-Gel Synthesis of Zircon - Effect of Addition of Lithium Ions," J. Mater. Sci., 33, 4821-28 (1998).
41. P. Tartaj, C. J. Serna, and M. Ocana, "Preparation of Blue Vanadium-Zircon Pigments by Aerosols Hydrolysis," J. Am. Ceram. Soc., 78 [5] 1147-52 (1995).
42. K. M. Trappen and R. A. Eppler, "Reaction of Zirconia with Silica at the Stoichiometry of Zircon," J. Am. Ceram. Soc., 72 [6] 882-85 (1989).
43. 4 Particles Obtained by Hydrolysis of Aerosols," J. Mater. Sci., 29, 6518-33 (1994).
44. T. Demiray, D. K. Nath, and F. A. Hummel, "Zircon-Vanadium Blue Pigments," J. Am. Ceram. Soc., 53 [1] 1-4 (1970).
45. M. Ocana, A. Caballero, A. A. Gonzalez-Elipe, P. Tartaj, C. J. Serna, and R. J. Merino, "The Effects of the NaF Flux on the Oxidation State and Localization of Praseodymium in Pr-Doped Zircon Pigments," J. Eur. Ceram. Soc., 19, 641-48 (1999).
46. 4 Blue-Coloured Stains," Br. Ceram. Trans., 3, 120-27 (1993).
47. 4-NaF System by Sol-Gel Processes and Their Characterization," J. Eur. Ceram. Soc., 11, 77-86 (1993).
48. 4," J. Mater. Sci., 29, 3329-36 (1994).
49. E. Boakye, M. D. Petry, and R. S. Hay, "Porous Aluminum Oxide and Lanthanum Phosphate Fiber Coatings," Ceram. Eng. Sci. Proc., 17 [4] 53-60 (1996).
50. E. Boakye, R. S. Hay, and M. D. Petry, "Continuous Coating of Oxide Fiber Tows Using Liquid Precursors: Monazite Coatings on Nextel 720," J. Am. Ceram. Soc., 82 [9] 2321-31 (1999).
51. E. E. Boakye, R. S. Hay, P. Mogilevsky, and L. M. Douglas, "Monazite Coatings on Fibers: II, Coating without Strength Degradation," J. Am. Ceram. Soc., 84 [12] 2793-801 (2001).
52. R. S. Hay, E. E. Boakye, and M. D. Petry, "Effect of Coating Deposition Temperature on Monazite-Coated Fiber," J. Eur. Ceram. Soc., 20, 589-97 (2000).
53. R. S. Hay and E. Boakye, "Monazite Coatings on Fibers: I, Effect of Temperature and Alumina Doping on Coated Fiber Tensile Strength," J. Am. Ceram. Soc., 84 [12] 2783-92 (2001).
54. C. Okkerse, J. H. DeBoer, and M. Cyrot, J. Chim. Phys. 57, 534 (1960).
55. J. H. deBoer, B. G. Linsen, and C. K. Okkerse, Ned. Akad Wetenschap Proc. Ser. B, 63, 360 (1960).
56. C. B. Amphlett, L. A. MacDonald, and M. J. Redman, J. Inorg. Nucl. Chem., 6, 236 (1958).
57. B. D. Cullity, Elements of X-Ray Diffraction, 2nd Ed; p. 102. Addison-Wesley, Reading, MA, 1978.
58. D. M. Wilson, "New High-Temperature Oxide Fibers"; pp 1-12 in High-Temperature Ceramic-Matrix Composites. Edited by W. Krenkel, R. N., and H. Schneider. Wiley-VCH, Weinheim, Germany, 2001.
59. M.-H. Berger, "Thermomechanical Stability of Mullite/Alumina Systems," Ceram. Eng. Sci. Proc., 23 [3] 41-52 (2002).
60. M. Takeda, A. Urano, I. Sakamoto, and Y. Imai, "Microstructure and Oxidation Behavior of Silicon Carbide Fibers Derived from Polycarbosilane," J. Am. Ceram. Soc., 83 [5] 1171-76 (2000).
61. R. S. Hay and E. E. Hermes, "Sol-Gel Coatings on Continuous Ceramic Fibers," Ceram. Eng. Sci. Proc., 11 [9-10] 1526-32 (1990).
62. R. S. Hay, "Sol-Gel Coating of Fiber Tows," Ceram. Eng. Sci. Proc., 12 [7-8] 1064-71 (1991).
63. R. S. Hay, J. R. Welch, and M. K. Cinibulk, "TEM Specimen Preparation and Characterization of Ceramic Coatings on Fiber Tows," Thin Solid Films, 308-309, 389-92 (1997).
64. M. K. Cinibulk, J. R. Welch, and R. S. Hay, "Transmission Electron Microscopy Specimen Preparation of Ceramic Coatings on Fibers," Mater. Res. Soc. Symp. Proc., 480, 3-17 (1997).
65. M. D. Petry, T. Mah, and R. J. Kerens, "Validity of Using Average Diameter for Determination of Tensile Strength and Weibull Modulus of Ceramic Filaments," J. Am. Ceram. Soc., 80 [10] 2741-44 (1997).
66. M. D. Petry and T.-I. Mah, "Effect of Thermal Exposures on the Strength of Nextel 550 and 720 Filaments," J. Am. Ceram. Soc., 82 [10] 2801-807 (1999).
67. A. Kelly and N. H. MacMillan, Strong Solids, 1st Ed; p. 421. Clarendon Press, Oxford, U.K., 1986.
68. B. D. Coleman, "On the Strength of Classical Fibers and Fiber Bundles," J. Mech. Phys. Solids, 7, 60-70 (1958).
69. 4 Solid Solutions from Colloidal Gels," J. Eur. Ceram. Soc., 20, 1749-58 (2000).
70. 4 Solid Solutions from Gels," J. Am. Ceram. Soc., 85 [4] 794-99 (2002).
71. H. Preiss, L.-M. Berger, and K. Szulzewsky, "Thermal Treatment of Binary Carbonaceous/Zirconia Gels and Formation of Zr(C,O,N) Solid Solutions," Carbon, 34 [1] 109-19 (1996).
72. H. Preiss, L.-M. Berger, and M. Braun, "Formation of Black Glasses and Silicon Carbide from Binary Carbonaceous/Silica Hydrogels," Carbon, 33 [12] 1739-46 (1995).
73. C. Real, D. Alcala, and K. M. Criado, "Synthesis of Silicon Carbide Whiskers from Carbothermal Reduction of Silica Gel by Means of the Constant Rate Thermal Analysis (CRTA) Method," Solid State Ionics, 95, 29-32 (1997).
74. X. K. Li, L. Liu, Y. X. Zhang, S. D. Schen, S. Ge, and L. C. Ling, "Synthesis of Nanometer Silicon Carbide Whiskers from Binary Carbonaceous Silica Gels," Carbon, 39, 159-65 (2001).
75. 2 Binary Oxides," J. Am. Ceram. Soc., 83 [3] 628-34 (2000).
76. 4 Interphase at High Temperature"; see Ref. 58, pp. 205-10.
77. R. S. Hay, E. Boakye, and M. D. Petry, "Fiber Strength with Coatings from Sols and Solutions," Ceram. Eng. Sci. Proc., 17 [4] 43-53 (1996).