SELECTIVE SOLAR ABSORBERS

Annual Review of Heat Transfer

Volumn 15, Issue , 2012, Pages 231-254

  Bermel, Peter ^a   Lee, Jeongwon ^b   Joannopoulos, John D ^b   Celanovic, Ivan ^b   Soljačiȩ, Marin ^b  

^a USA   (United States)

^b PURDUE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CERAMIC MATERIALS; CERMETS; PASSIVE SOLAR; PHOTONIC CRYSTALS; SOLAR ABSORBERS; TEXTURES;

ATMOSPHERIC CONDITIONS; EARTH'S SURFACE; ELECTRICITY-GENERATION; RADIATION-INDUCED; RE-RADIATION; SELECTIVE SOLAR ABSORBER; SHORT WAVELENGTHS; SOLAR THERMAL ELECTRICITY; THERMOELECTRIC; THERMOPHOTOVOLTAICS;

SOLAR HEATING;

EID: 85162192489     PISSN: 10490787     EISSN: 23750294     Source Type: Book Series    
DOI: 10.1615/AnnualRevHeatTransfer.2012004119     Document Type: Chapter

References (53)

1. R. B. Ram Gupta, ed., Hydrogen Fuel: Production, Transportation, and Storage, Boca Raton, FL: CRC, 2009.
2. B. D. Wedlock, Thermo-photo-voltaic energy conversion, Proc. IEEE, 51:694-698, 1963.
3. R. E. Black, P. F. Baldasaro, and G. W. Charache, Thermophotovoltaics-development status and parametric considerations for power applications, Proc. of 18th International Conference on Thermoelectrics, 18:639-644, 1999.
4. P. Bermel, M. Ghebrebrhan, W. Chan, Y. X. Yeng, M. Araghchini, R. Hamam, C. H. Marton, K. F. Jensen, M. Soljacic, J. D. Joannopoulos, S. G. Johnson, and I. Celanovic, Design and global optimization of high-efficiency thermophotovoltaic systems, Opt. Express, 18:A314-A334, 2010.
5. C. E. Kennedy, Review of mid- to high temperature solar selective absorber materials, Report, Golden, CO: National Renewable Energy Laboratory Research, 2002.
6. C. M. Lampert, Coatings for enhanced photothermal energy collection. I: Selective absorbers, Sol. Energy Mater., 1:319-341, 1979.
7. 2as a selective solar absorber, Thin Solid Films, 83:393-398, 1981.
8. A. Donnadieu and B. O. Seraphin, Optical performance of absorber-reflector combinations for photothermal solar energy conversion, J. Opt. Soc. Am., 68:292-297, 1978.
9. M. Okuyama, K. Saji, T. Adachi, H. Okamoto, and Y. Hamakawa, Selective absorber using glow-discharge amorphous silicon for solar photothermal conversion, Sol. Energy Mater., 3:405-413, 1980.
10. A. Narayanaswamy and G. Chen, Thermal emission control with one-dimensional metallodielectric photonic crystals, Phys. Rev. B, 70:125101-1-125101-4, 2004.
11. A. Narayanaswamy, J. Cybulski, and G. Chen, 1D Metallo-dielectric photonic crystals as selective emitters for thermophotovoltaic applications, AIP Conf. Proc., 738:215-220, 2004.
12. S. Y. Lin, J. Moreno, and J. G. Fleming, Three-dimensional photonic-crystal emitter for thermal photovoltaic power generation, Appl. Phys. Lett., 83:380-382, 2003.
13. X. Li, Y. Chen, J. Miao, P. Zhou, Y. Zheng, L. Chen, and Y. Lee, High solar absorption of a multilayered thin film structure, Opt. Express, 15:1907-1912, 2007.
14. N. P. Sergeant, O. Pincon, M. Agrawal, and P. Peumans, Design of wide-angle solar-selective absorbers using aperiodic metal-dielectric stacks, Opt. Express, 17:22800-22812, 2009.
15. N. P. Sergeant, M. Agrawal, and P. Peumans, High performance solar-selective absorbers using coated sub-wavelength gratings, Opt. Express, 18:5525-5540, 2010.
16. 4tandem absorber for high-temperature solar applications, Sol. Energy Mater. Sol. Cells, 92:495-504, 2008.
17. H. C. Barshilia, N. Selvakumar, K. S. Rajam, and A. Biswas, Optical properties and thermal stability of TiAlN/AlON tandem absorber prepared by reactive DC/RF magnetron sputtering, Sol. Energy Mater. Sol. Cells, 92:1425-1433, 2008.
18. ymultilayer absorber coatings, Sol. Energy Mater. Sol. Cells, 92:315-323, 2009.
19. G. E. McDonald, Spectral reflectance properties of black chrome for use as a solar selective coating, Sol. Energy, 17:119-122, 1975.
20. 3/Cr cermet films, Appl. Phys. Lett., 30:511-513, 1977.
21. C. M. Lampert and J. Washburn, Microstructure of a black chrome solar selective absorber, Sol. Energy Mater., 1:81-92, 1979.
22. A. Andersson, O. Hunderi, and C. G. Granqvist, Nickel pigmented anodic aluminum oxide for selective absorption of solar energy, J. Appl. Phys., 51:754-764, 1980.
23. A. Scherer, O. T. Inal, and R. B. Pettit, Modelling of degradation of nickel-pigmented aluminium oxide photothermal collector coatings, J. Mater. Sci., 23:1934-1942, 1988.
24. 3selective cermet coatings for photothermal conversion up to 500°C, Thin Solid Films, 190:241-254, 1989.
25. B. Window, D. McKenzie, and G. Harding, Selective absorber design, Sol. Energy Mater., 2:395-401, 1980.
26. I. T. Ritchie and B. Window, Applications of thin graded-index films to solar absorbers, Appl. Opt., 16:1438-1443, 1977.
27. 3composite solar absorbers, Appl. Phys. Lett., 39:29-31, 1989.
28. M. Lanxner, and Z. Elgat, Solar selective absorber coatings for high service temperatures, produced by plasma sputtering, Proc. SPIE, 1272:240-249, 1990.
29. 2composite solar absorber surfaces, Sol. Energy Mater. Sol. Cells, 54:67-73, 1998.
30. 3cermet selective surfaces for high-temperature application, Sol. Energy Mater. Sol. Cells, 40:43-53, 1996.
31. Q. Zhang, Metal-AlN cermet solar selective coatings deposited by direct current magnetron sputtering technology, J. Phys. D, 31:355-362, 1998.
32. Q.-C. Zhang, K. Zhao, B.-C. Zhang, L.-F. Wang, Z.-L. Shen, D.-Q. Lu, D.-L. Xie, and B.-F. Li, High performance Al-N cermet solar coatings deposited by a cylindrical direct current magnetron sputter coater, J. Vac. Sci. Technol. A, 17:2885-2890, 1999.
33. Q. Zhang, High efficiency Al-N cermet solar coatings with double cermet layer film structures, J. Phys. D, 32:1938-1944, 1999.
34. D. Chester, P. Bermel, J. D. Joannopoulos, M. Soljacic, and I. Celanovic, Design and global optimization of high-efficiency solar thermal systems with tungsten cermets, Opt. Express, 19:A245-A257, 2011.
35. M. Kussmaul, M. J. Mirtich, and A. Curren, Ion beam treatment of potential space materials at the NASA Lewis Research Center, Surf. Coat. Technol., 51:299-306, 1992.
36. M. H. Huang, S. Mao, H. Feick, H. Yan, Y. Wu, H. Kind, E. Weber, R. Russo, and P. Yang, Room-temperature ultraviolet nanowire nanolasers, Science, 292:1897-1899, 2001.
37. J. Zhu, Z. Yu, G. F. Burkhard, C. Hsu, S. T. Connor, Y. Xu, Q. Wang, M. McGehee, S. Fan, and Y. Cui, Optical absorption enhancement in amorphous silicon nanowire and nanocone arrays, Nano Lett., 9:279-282, 2009.
38. H. Sai, Y. Kanamori, K. Hane, and H. Yugami, Numerical study on spectral properties of tungsten one-dimensional surface-relief gratings for spectrally selective devices, J. Opt. Soc. Am. A, 22:1805-1813, 2005.
39. J. T. K. Wan, Tunable thermal emission at infrared frequencies via tungsten gratings, Opt. Commun., 282:1671-1675, 2009.
40. Y. Chen and Z. M. Zhang, Design of tungsten complex gratings for thermophotovoltaic radiators, Opt. Commun., 269:411-417, 2007.
41. 3thin films, Sol. Energy Mater. Sol. Cells, 92:1025-1029, 2008.
42. A. Heinzel, V. Boerner, A. Gombert, B. Bläsi, V. Wittwer, and J. Luther, Radiation filters and emitters for the NIR based on periodically structured metal surfaces, J. Mod. Opt., 47:2399-2419, 2000.
43. H. Sai, H. Yugami, Y. Kanamori, and K. Hane, Solar selective absorbers based on twodimensional W surface gratings with submicron periods for high-temperature photothermal conversion, Sol. Energy Mater. Sol. Cells, 79:35-49, 2003.
44. H. Sai, Y. Kanamori, and H. Yugami, High-temperature resistive surface grating for spectral control of thermal radiation, Appl. Phys. Lett., 82:1685-1687, 2003.
45. H. Sai and H. Yugami, Thermophotovoltaic generation with selective radiators based on tungsten surface gratings, Appl. Phys. Lett., 85:3399-3401, 2004.
46. H. Sai, Y. Kanamori, and H. Yugami, Tuning of the thermal radiation spectrum in the nearinfrared region by metallic surface microstructures, J. Micromech. Microeng., 15:S243-S249, 2005.
47. I. Celanovic, N. Jovanovic, and J. Kassakian, Two-dimensional tungsten photonic crystals as selective thermal emitters, Appl. Phys. Lett., 92:193101-1-193101-3, 2008.
48. I. Celanovic, F. O'Sullivan, N. Jovanovic, M. Qi, and J. G. Kassakian, 1D and 2D photonic crystals for thermophotovoltaic applications, Proc. SPIE, 5450:416-422, 2004.
49. E. Rephaeli and S. Fan, Tungsten black absorber for solar light with wide angular operation range, Appl. Phys. Lett., 92:211107-1-211107-3, 2008.
50. E. Rephaeli and S. Fan, Absorber and emitter for solar thermo-photovoltaic systems to achieve efficiency exceeding the Shockley-Queisser limit, Opt. Express, 17:15145-15159, 2009.
51. J. Wang, Z. Chen, and D. Li, Simulation of two-dimensional Mo photonic crystal surface for high-temperature solar-selective absorber, Phys. Status Solidi A, 207:1988-1992, 2010.
52. C.-H. Chang, J. A. Dominguez-Caballero, H. J. Choi, and G. Barbastathis, Nanostructured gradient-index antireflection diffractive optics, Opt. Lett., 36:2354-2356, 2011.
53. S.-Y. Lin, J. G. Fleming, and I. El-Kady, Three-dimensional photonic-crystal emission through thermal excitation. Opt. Lett., 28:1909-1911, 2003.