Single-phase liquid flow in minichannels and microchannels

Heat Transfer and Fluid Flow in Minichannels and Microchannels

Volumn , Issue , 2005, Pages 87-136

  Kandlikar, Satish G ^a  

^a Kate Gleason College of Engineering   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85144342841     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-008044527-4/50005-0     Document Type: Chapter

References (56)

1. T.M. Adams, S.I. Abdel-Khalik, M. Jeter and Z.H. Qureshi (1997) An experimental investigation of single-phase forced convection in microchannels. Int. J. Heat. Mass Trans. 41(6–7), 851-857.
2. ASME Standard B46. 1-2002, Surface Texture (Surface Roughness, Waviness, and Lay), The American Society of Mechanical Engineers, An American National Standard, (ASME B46, 1–2002) 1–98.
3. R. Baviere and F. Avela (2004) First local measurement in microchannels with integrated micromachined strain gauges. Paper No. ICMM2004-2406, Second International Conference on Microchannels and Minichannels Rochester, NY USA, June 17–19 221-228.
4. R. Baviere, F. Ayela, S. Le Person and M. Favre-Marinet (2004) An experimental study of water flow in smooth and rough rectangular microchannels. Paper No. ICMM2004-2338, Second International Conference on Microchannels and Minichannels Rochester, NY USA, June 17–19 221-228.
5. A.E. Bergles, J.H. Lienhard, G.E. V Kendall and P. Griffith (2003) Boiling and condensation in small diameter channels. Heat Transfer Eng. 24 18-40.
6. A. Bucci, G.P. Celata, M. Cumo, E. Serra and G. Zummo (2004) Water single-phase fluid flow and heat transfer in capillary tubes. Paper No. ICMM2004-2406, Second International Conference on Microchannels and Minichannels Rochester, NY USA, June 17–19 International Conference on Microchannels and Minichannels. Paper # 1037 ASME 221-228.
7. A. Bucci, G.P. Celata, M. Cumo, E. Serra and G. Zummo (2004) Water single-phase fluid flow and heat transfer in capillary tubes. Paper No. ICMM2004-2406, Second International Conference on Microchannels and Minichannels Rochester, NY USA, June 17–19 International Conference on Microchannels and Minichannels. Paper # 1037 ASME 319-326.
8. G.P. Celata, M. Cumo, M. Guglielmi and G. Zummo (2002) Experimental investigation of hydraulic and single phase heat transfer in 0.130 mm capillary tube. Microscale Thermophys. Eng. 6 85-97.
9. R.Y. Chen (1972) Flow in the entranceregion at low Reynolds numbers. J. Fluid. Eng. 95 153-158.
10. E.G. Colgan, B. Furman, M. Gaynes, W. Graham, N. LaBianca, J.H. Magerlein, R.J. Polastre, M.B. Rothwell, R.J. Bezama, R. Choudhary, K. Martson, H. Toy, J. Wakil, J. Zitz and R. Schmidt (March 15–17, 2005) A practical implementation of silicon microchannel coolers for high power chips. Invited Paper presented at IEEE-Semi-Therm 21 San Jose
11. R.M. Curr, D. Sharma and D.G. Tatchell (1972) Numerical predictions of some three-dimensional boundary layers in ducts. Comput. Method. Appl. Mech. Eng. 1 143-158.
12. H. Darcy (1857) Recherches experimentales relatives aumovement de L'Eau dans les Tuyaux. Paris, France: Mallet-Bachelier
13. J.T. Fanning (1886) A practical treatise on hydraulic and water supply engineering. revised edition of 1877 New York: Van Nostrand
14. M. Gad-el-Hak (1999) The fluid mechanics of microdevices. J. Fluid. Eng. 121 7-33.
15. G. Gamrat, M. Favre-Marinet and D. Asendrych (2004) Numerical modeling of heat transfer in rectangular microchannels. Paper No. ICMM2004-2336, ASME, Second International Conference on Microchannels and Minichannels June 16–18, Rochester, NY 205-212.
16. S.V. Garimella and V. Singhal (2004) Single-phase flow and heat transport and pumping considerations in micr ochannel heat sinks. Heat Trans. Eng. 25(1), 15-25.
17. V. Gnielinski (1976) New equations for heat and mass transfer in turbulent pipe and channel flow. Int. Chem. Eng. 16 359-368.
18. G. Harpole and J.E. Eninger (Feb, 1991) Micro-channel heat exchanger optimization. Proceedings-IEEE Semiconductor Thermal and Temperature Measurement Symposium 59-63.
19. J.P. Hartnett, J.C.Y. Koh and S.T. McComas (1962) A comparison of predicted and measured friction factors for turbulent flow through rectangular ducts. J. Heat Trans. 84 82-88.
20. R.W. Hornbeck (1964) Laminar flow in the entrance region of a pipe. Appl. Sci. Res. 13 224-232.
21. O.C. Jones Jr. (1976) An improvement in the calculation of turbulent friction in rectangular ducts. J. Fluid. Eng. 98 173-181.
22. J. Judy, D. Maynes and B.W. Webb (2002) Characterization of frictional pressure drop for liquid flows through microchannels. Int. J. Heat Mass Trans. 45 3477-3489.
23. S. Kakac, R.K. Shah and W. Aung (1987) Handbook of Single-Phase Convective Heat Transfer New York: John Wiley and Sons, Inc.
24. S.G. Kandlikar (2005) High heat flux removal with microchannels—A roadmap of challenges and opportunities. Heat Trans. Eng. 26(8),
25. S.G. Kandlikar and W.J. Grande (2004) Evaluation of single-phase flow in microchannels for high flux chip cooling-thermohydraulic performance enhancement and fabrication technology. Heat Trans. Eng. 25(8), 5-16.
26. S.G. Kandlikar, S. Joshi and S. Tian (2003) Effect of surface roughness on heat transfer and fluid flow characteristics at low Reynolds numbers in small diameter tubes. Heat Trans. Eng. 24(3), 4-16.
27. S.G. Kandlikar and H.R. Upadhye (March 15–17, 2005) Extending the heat flux limit with enhanced microchannels in direct single-phase cooling of computer chips. Invited Paper presented at IEEE-Semi-Therm 21 San Jose
28. S.G. Kandlikar, D. Schmitt, A.L. Carrano and J.B. Taylor (2005) Characterization of surface roughness effects on pressure drop in single-phase flow in minichannels. Phys. Fluid. 17 (accepted)
29. W.M. Kays and A.L. London (1984) Compact Heat Exchangers New York, NY: McGraw-Hill
30. T. Kishimoto and S. Sasaki (1987) Cooling characteristics of diamond-shaped interrupted cooling fins for high power LSI devices. Electron. Letter. 23(9), 456-457.
31. R.W. Knight, D.J. Hall, J.S. Goodling and R.C. Jaeger (1992) Heat sink optimization with application to microchannels. IEEE Transactions on Components, Hybrids, and Manufacturing Technology 15(5), 832-842.
32. J. Koo and C. Kleinstreuer (2004) Analyses of liquid flow in micro-conduits. Paper No. ICMM2004-2334. ASME, Second International Conference on Microchannels and Minichannels Rochester, NY, June 17–19 191-198.
33. Z.X. Li, D.X. Du and Z.Y. Guo (2000) Experimental study on flow characteristics of liquid in circular microtubes. Proceeding of the International Conference on Heat Transfer and Transport Phenomena in Microscale Banff, Canada, October 15–20 162-167.
34. R. Mises R.v. (1944) Elemente der Technischen Hydrodynamik Leipzig: B. G. Teubner
35. L.F. Moody (1944) Friction factors for pipe flow. ASME Transactions 66 671-683.
36. M. Niklas and M. Favre-Marinet (2003) Pressure losses in a network of triangular minichannels. ASME Paper No. ICMM2003-1039, First International Conference on Microchannels and Minichannels April 24–25 335-350.
37. J. Nikuradse (July/August 1933) Strommungsgesetze in Rauen Rohren, VDI-Forschungsheft 361. Belige zu Forschung auf dem Gebiete des Ingenieur wesens Ausage B Band 4 English Translation
38. J. Nikuradse (1937) Laws of flow in rough pipes. NACA Tech. Mem. 1292
39. R.J. Phillips (1987) Forced convection, liquid cooled, microchannel heat sinks. MS Thesis Cambridge, MA: Department of Mechanical Engineering, Massachusetts Institute of Technology
40. R.J. Phillips (1990) Microchannel heat sinks. Advances in Thermal Modeling of Electronic Components and Systems Chapter 3 New York, NY: Hemisphere Publishing Corporation
41. J.H. Ryu, D.H. Choi and S.J. Kim (2002) Numerical optimization of the thermal performance of a microchannel heat sink. Int. J. Heat Mass Trans. 45 2823-2827.
42. D.J. Schmitt and S.G. Kandlikar (June 13–15, 2005) Effects of repeating microstructures on pressure drop in rectangular minichannels. Paper No. ICMM2005-75111, ASME. Third International Conference on Microchannels and Minichannels Toronto, Canada
43. R.K. Shah and A.L. London (1978) Laminar Flow Forced Convection in Ducts, Supplement 1 to Advances in Heat Transfer New York: Academic Press
44. P. Shen, S.K. Aliabadi and J. Abedi (2004) A review of single-phase liquid flow and heat transfer in microchannels. Paper ICMM2004-2337, ASME, Second International Conference on Microchannels and Minichannels June 17–19 213-220.
45. M.E. Steinke (2005) Characterization of single-phase fluid flow and heat transfer in plain and enhanced silicon microchannels. PhD Thesis Rochester, NY: Microsystems Engineering, Rochester Institute of Technology
46. M.E. Steinke and S.G. Kandlikar (June 17–19, 2004) Single-phase enhancement techniques in microchannel flows. Paper No. ICMM2004-2328, ASME, Second International Conference on Microchannels and Minichannels Rochester, NY
47. M.E. Steinke and S.G. Kandlikar (June 13–15, 2005) Single-phase liquid friction factors in microchannels. Paper No. ICMM2005-75112, ASME. Third International Conference on Microchannels and Minichannels Toronto, Canada
48. M.E. Steinke and S.G. Kandlikar (June 13–15, 2005) Review of single-phase liquid heat transfer in microchannels. Paper No. ICMM2005-75114, ASME, Third International Conference on Microchannels and Minichannels Toronto, Canada
49. M.E. Steinke and S.G. Kandlikar (June 13–15, 2005) Development of an experimental facility for investigating singlephase liquid flow in microchannels. Paper No. ICMM2005-75070, ASME, Third International Conference on Microchannels and Minichannels Toronto, Canada
50. X. Tu and P. Hrnjak (2003) Experimental investigation of single-phase flow and pressure drop through rectangular microchannels. ASME, ICMM2003-1028, First International Conference on Microchannels and Minichannels April 24–25 257-267.
51. D.B. Tuckerman and R.F.W. Pease (1981) High performance heat sink for VLSI. IEEE Electron Dev. Lett. EDL 2(5), 126-129.
52. D.B. Tuckerman (1984) Heat transfer microstructures for integrated circuits. PhD Thesis Stanford, CA: Stanford University
53. R.L. Webb, E.R.G. Eckert and R.J. Goldstein (1971) Heat transfer and friction in tubes with repeated-rib roughness. Int. J. Heat and Mass Trans. 14 601-617.
54. P. Wibulswas (1966) Laminar flow heat transfer in non-circular ducts. PhD Thesis London, UK: London University
55. B. Xu, K.T. Ooi, N.T. Wong and W.K. Choi (2000) Experimental investigation of flow friction for liquid flow in microchannels. Int. Com. Heat Mass Trans. 27(8), 1165-1176.
56. D. Yu, R. Warrington, R. Barron and T. Ameel (1995) An experimental investigation of fluid flow and heat transfer in microtubes. Proceedings of the ASME/JSME Thermal Engineering Conference 1 ASME 523-530.