Control System Design Guide: A Practical Guide

Control System Design Guide: A Practical Guide

Volumn , Issue , 2004, Pages 1-464

  Ellis, George ^a  

^a Danaher Corp   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85136652066     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-12-237461-6.X5000-0     Document Type: Book

References (100)

1. A. Antoniou (1993) 2nd ed. Digital Filters Analysis, Design, and Applications McGraw-Hill
2. B. Armstrong-Helouvry (1991) Control of Machines with Friction Kluwer Academic Publishers
3. R. Bassani and B. Piccigallo (1992) Hydrostatic Lubrication Elsevier
4. S. Beineke, F. Schutte, H. Wertz and H. Grotstollen (1997) Comparison of Parameter Identification Schemes for Self-Commissioning Drive Control of Nonlinear Two-Mass Systems. Conf. Rec. IEEE IAS Annual Mtg. New Orleans 493-500.
5. M. Bilewski, L. Gordano, A. Fratta, A. Vagati and F. Villata (March–April 1993) Control of high performance interior permanent magnet synchronous drives. IEEE Trans. Ind. Appl. Vol. 29(No. 2), 328-337.
6. G. Biernson (1988) Principles of Feedback Controls Vol. 1–2 John Wiley & Sons
7. B. Boulter (1997) The Effect of Speed Loop Bandwidths and Line-Speed on System Natural Frequencies in Multi-Span Strip Processing Systems. Conf. Rec. IEEE IAS Annual Mtg. New Orleans 2157-2164.
8. R.H. Brown, S.C. Schneider and M.G. Mulligan (Feb. 1992) Analysis of Algorithms for Velocity Estimation from Discrete Position Versus Time Data. IEEE Trans. Ind. Elec. vol. 39(no. 1), 11-19.
9. F.J. Bueche (1980) Introduction of Physics for Scientists and Engineers McGraw-Hill
10. J. Burke (1999) Extraction of High Resolution Position Information from Sinusoidal Encoders. Proc. PCIM-Europe Nuremberg 217-222.
11. J.R. Carstens (1996) Automatic Control Systems and Components Prentice-Hall
12. M.J. Corley and R.D. Lorenz (1998) Rotor Position and Velocity Estimation for a Salient-Pole Permanent Magnet Synchronous Machine at Standstill and High Speeds. IEEE Trans. Ind. Appl. vol. 34(no. 4), 784-789. Jul./Aug.
13. Data Devices Corp. (1998) Manual for 19220 RDC http://www.ddcweb.com (use product search for “19220”). (19220sds.pdf). Available at
14. J. D'Azzo and C. Houpis (1988) 3rd Edition Linear Control System Analysis and Design McGraw-Hill
15. V. Del Toro (1968) Electromechanical Devices for Energy Conversion and Control Systems Prentice-Hall
16. T. Deliyannis, Y. Sun and J.K. Fidler (1999) Continuous-Time Active Filter Design CRC Press
17. J. Deur (2000) A comparative study of servosystems with acceleration feedback. Proc of IEEE IAS Rome
18. N.A.O. Demerdash and M.A. Alhamadi (Apr. 1996) Three Dimensional Finite Element Analysis of Permanent Magnet Brushless DC Motor Drive—Status of the State of the Art. IEEE Trans. Ind. Elec. vol. 43(no. 2), 268-275.
19. R. Dhaouadi, K. Kubo and M. Tobise (May/Jun. 1994) Analysis and Compensation of Speed Drive Systems with Torsional Loads. IEEE Trans. Ind. Appl. vol. 30(no. 3), 760-766.
20. R.C. Dorf and R.H. Bishop (2000) 9th Ed. Modern Control Systems Addison-Wesley Publishing Company
21. G. Ellis (March, 1996) Driven by Technology Advancements, Brushless DC Motors Are Displacing Brush Types. PCIM Magazine
22. G. Ellis (1999) PDFF: An Evaluation of a Velocity Loop Control Method. Conf. Rec. PCIM 49-54.
23. G. Ellis and R.D. Lorenz (1999) Comparison of Motion Control Loops for Industrial Applications. Conf. Rec. IEEE IAS Annual Mtg. Phoenix 2599-2605.
24. G. Ellis and R.D. Lorenz (2000) Resonant Load Control Methods for Industrial Servo Drives. Proc. of IEEE IAS Rome
25. Ellis, G., “Cures for Mechanical Resonance in Industrial Servo Systems,” PCIM 2001 Proceedings, Nuremberg, pp. 187–192.
26. Ellis, G., Krah, J.O., “Observer-Based Resolver Conversion in Industrial Servo Systems,” PCIM 2001 Proceedings, Nuremberg, pp. 311–316.
27. Ellis, G., “Observer-based Enhancement of Tension Control in Web Handling,” PCIM 2002 Proceedings, Nuremberg, pp. 147–154.
28. G. Ellis (2002) Observers in Control Systems Academic Press
29. Ellis, G., “Comparison of Position-Control Algorithms for Industrial Applications,” PCIM 2003 Proceedings, Nuremberg, pp. 71–78.
30. J. Fassnacht (2001) Benefits and Limits of Using an Acceleration Senosr in Actively Damping High Frequency Mechanical Oscillations. Conf. Rec. of the IEEE IAS 2337-2344.
31. A.E. Fitzgerald, C. Kingsley, S.D. Umans, C. Kingsley Jr. and S.D. Umans (2002) 6th ed. Electric Machinery McGraw-Hill
32. G.F. Franklin, D.J. Powell and A. Emami-Naeini (2002) 4th ed. Feedback Control of Dynamic Systems Addison-Wesley Publishing Company
33. G.F. Franklin, D.J. Powell, M.L. Workman and D. Powell (1997) 3rd ed. Digital Control of Dynamic Systems Addison-Wesley Publishing Company
34. M.S. Ghausi and K.R. Laker (1981) Modern Filter Design: Active RC and Switched Capacitor Prentice-Hall
35. B.K. Ghosh, N. Xi and T.J. Tarn (1999) Controls in Robotics and Automation Academic Press
36. M. Gopal (1993) 2nd ed. Modern Control System Theory John Wiley and Sons
37. R.C. Gunther (1971) Lubrication Chilton Book Company
38. R. Hagl and J. Heidenhain (Mar. 1998) Encoders Keep Linear Motors on Track. PT Design Magazine 43-46.
39. K. Hameyer and R.J.M. Belmans (Apr. 1996) Permanent Magnet Excited Brushed DC Motors. IEEE Trans. Ind. Elec. vol. 43(no. 2), 247-255.
40. D.C. Hanselman (2003) Brushless Permanent-Magnet Motor Design 2nd ed., Writer's Collective
41. A.M. Hava, S. Sul, R.J. Kerkman and T.A. Lipo (July/Aug. 1999) Dynamic Overmodulation Characteristics of Triangle Intersection PWM Methods. IEEE Trans. Ind. Appl. vol. 35(no. 4), 896-907.
42. J.A. Haylock, B.C. Mecrow, A.G. Jack and D.J. Atkinson (Sep./Oct. 1999) Enhanced Current Control of High-Speed PM Machine Drives through the Use of Flux Controllers. IEEE Trans. Ind. Appl. vol. 35(no. 5), 1030-1038.
43. K. Hong and K. Nam (Apr. 1998) A Load Torque Compensation Scheme under the Speed Measurement Delay. IEEE Trans. Ind. Elec. vol. 45(no. 2), 283-290.
44. Y. Hori, H. Sawada and Y. Chun (Feb. 1999) Slow Resonance Ratio Control for Vibration Suppression and Disturbance Rejection in Torsional System. IEEE Trans. Ind. Elec. vol. 46(no. 1), 162-168.
45. L.B. Jackson (1999) 2nd ed. Digital Filters and Signal Processing Kluwer Academic Publishers
46. C.T. Johnson and R.D. Lorenz (Nov./Dec. 1992) Experimental Identification of Friction and its Compensation in Precise, Position Controlled Mechanisms. IEEE Trans. Ind. Appl. 1392-1398.
47. E.W. Kamen (1999) 1st ed. Industrial Controls and Manufacturing Academic Press
48. J.K. Kang and S.K. Sul (Feb. 2000) Vertical-Vibration Control of Elevator Using Estimated Car Acceleration Feedback Compensation. IEEE Trans. on Ind. Elec. Vol. 47(No. 1), 91-99.
49. T. Kenjo (1994) Electric Motors and Their Controls, an Introduction Oxford University Press
50. R.J. Kerkman, D. Leggate, B.J. Seibel and T.M. Rowan (Feb. 1996) Operation of PWM Voltage Source-Inverters in the Overmodulation Region. IEEE Trans. Ind. Elec. vol. 43(no. 1), 132-141.
51. Y. Konishi and M. Nakaoka (Apr. 1999) Current-Fed Three Phase and Voltage-Fed Three-Phase Active Converters with Optimum PWM Pattern Scheme and Their Performance Evaluations. IEEE Trans. Ind. Elec. vol. 46(no. 2), 279-287.
52. J.O. Krah (1999) Software Resolver-to-Digital Converter for High Performance Servo Drives. Proc. PCIM Europe Nuremberg 301-308.
53. R. Krishnan (1993) Control and Operation of PM Synchronous Motor Drives in the Field-Weakening Region. Proc. IECON 93 Maui 745f.
54. H.S. Lee and M. Tomizuka (Feb. 1996) Robust Motion Controller Design for High Accuracy Positioning Systems. IEEE Trans. Ind. Elec. vol. 43(no. 1), 48-55.
55. Y.M. Lee, J.K. Kang and S.K. Sul (1999) Acceleration feedback control strategy for improving riding quality of elevator system. Proc. of IEEE IAS Phoenix 1375-1379.
56. W. Leonhard (2001) 3rd ed. Control of Electric Drives Springer Verlag
57. R.D. Lorenz (1998) “ME-746. Dynamics of Controlled Systems: A Physical Systems-Based Methodology for Non-Linear, Multivariable, Control System Design,” Video Class University of Wisconsin-Madison
58. R.D. Lorenz (Dec. 2–5, 1997) Modern Control of Drives. COBEP'97, Belo Horizonte, MG Brazil 45-54.
59. R.D. Lorenz (Sep. 3–6, 1996) New Drive Control Algorithms (State Control, Observers, Self-Sensing, Fuzzy Logic, and Neural Nets). Proc. PCIM Conf. Las Vegas
60. R.D. Lorenz (June 10–12, 1986) Synthesis of State Variable Controllers for Industrial Servo Drives. Proc. Conf. on Applied Motion Control 247-251.
61. R.D. Lorenz, M.O. Lucas and D.B. Lawson (1986) Synthesis of a State Variable Motion Controller for High Performance Field Oriented Induction Machine Drives. Conf. Rec. IEEE IAS Annual Mtg. 80-85.
62. R.D. Lorenz and D.W. Novotny (June 6–11, 1988) A Control Systems Perspective of Field Oriented Control for AC Servo Drives. Proc. Controls Engineering Conf. Chicago XVIII.
63. R.D. Lorenz and K. Van Pattern (Jul./Aug. 1991) High Resolution Velocity Estimation for All Digital, AC Servo Drives. IEEE Trans. Ind. Appl. vol. 27(no. 4), 701-705.
64. S.J. Mason (July 1953) Feedback Theory: Some Properties of Signal Flow Graphs. Proc. IRE vol. 41 1144-1156.
65. S.J. Mason (July 1956) Feedback Theory: Further Properties of Signal Flow Graphics. Proc. IRE vol. 44 920-926.
66. N. Matsui (1996) Sensorless PM Brushless DC Motor Drives. IEEE Trans. Ind. Elec. vol. 43(no. 2), 300-308.
67. S. McClellan (1996) Electromagnetic Compatibility for SERVOSTAR® S and CD http://www.motionvillage.com/training/handbook/cabling/shielding.html Available at
68. R.W. Miller (1993) Lubricants and Their Applications McGraw-Hill Book Company
69. D.B. Miron (1997) Design of Feedback Control Systems International Thomson Publishing
70. M.H. Moatemri, P.B. Schmidt and R.D. Lorenz (1991) Implementation of a DSP-Based, Acceleration Feedback Robot Controller: Practical Issues and Design Limits. Conf. Rec. IEEE IAS Annual Mtg. 1425-1430.
71. S.A. Nasar, I. Boldea and L.E. Unnewehr (1993) Permanent Magnet, Reluctance, and Self-Synchronous Motors CRC Press
72. S. Natarajan (1987) Theory and Design of Linear Active Networks Macmillan Publishing Company
73. F. Nekoogar and G. Moriarty (1999) Digital Control using Digital Signal Processing. Prentice-Hall Information and System Sciences Series
74. D.Y. Ohm (Oct. 21–26, 1990) A PDFF Controller for Tracking and Regulation in Motion Control. Proceedings of 18th PCIM Conference, Intelligent Motion Philadelphia 26-36.
75. D.Y. Ohm (Oct. 2–7, 1994) Analysis of PID and PDF Compensators for Motion Control Systems. IEEE IAS Annual Meeting Denver 1923-1929.
76. S. Orlosky (Sept. 1996) Improve Encoder Performance. PT Design Magazine 43-46.
77. W. Palm (1999) 2nd ed. Modeling, Analysis and Control of Dynamic Systems John Wiley and Sons
78. J.W. Park, D.H. Koo, J.M. Kim, G.H. Kang and J.B. Park (2001) High Performance Speed Control of Permanent Magnet Synchronous Motor with Eccentric Load. Conf. Rec. IEEE IAS Annual Mtg. 815-820.
79. T.W. Parks and C.S. Burrus (1987) Digital Filter Design John Wiley & Sons
80. C.L. Phillips and R.D. Harbor (1999) 4th ed. Feedback Control Systems Prentice-Hall
81. R.M. Phelan (1977) Automatic Control Systems Cornell University Press
82. W.H. Press, S.A. Teukolsky, W.T. Vettering and B.P. Flannery (2002) 2nd ed. Numerical Recipes in C Cambridge University Press
83. M.A. Rahman, T.S. Radwan, A.M. Osheiba and A.E. Lashine (Aug. 1997) Analysis of Current Controllers for Voltage-Source Inverter. IEEE Trans. Ind. Elec. vol. 44(no. 4), 477-485.
84. M.F. Rahman, L. Zhong and K.W. Lim (Nov./Dec. 1998) A Direct Torque-Controlled Interior Permanent Magnet Synchronous Motor Drive Incorporating Field Weakening. IEEE Trans. Ind. Appl. vol. 34(no. 6), 1246-1253.
85. O. Rubin (1986) The Design of Automatic Control Systems Artech House
86. C. Schmidt, J. Heinzl and G. Brandenburg (Oct. 1999) Control Approaches for High-Precision Machine Tools with Air Bearings. IEEE Trans on Ind. Elec. vol. 46(no. 5), 979-989.
87. P.B. Schmidt and R.D. Lorenz (May/Jun. 1992) Design Principles and Implementation of Acceleration Feedback to Improve Performance of DC Drives. IEEE Trans. Ind. Appl. 594-599.
88. P. Schmidt and T. Rehm (1999) Notch Filter Tuning for Resonant Frequency Reduction in Dual-Inertia Systems. Conf. Rec. IEEE IAS Annual Mtg. Phoenix 1730-1734.
89. Sheingold, Daniel H, Analog-Digital Conversion Handbook, 3rd Edition, by Analog Devices, Ed. Prentice Hall
90. H. Shin (Jun. 1998) New Antiwindup PI Controller for Variable-Speed Motor Drives. IEEE Trans. Ind. Elec. vol. 45(no. 3), 445-450.
91. Y.S. Suh and T.W. Chun (2001) Speed Control of a PMSM motor based on the new disturbance observer. Conf Rec. of IEE IAS Annual Mtg. 1319-1326.
92. A.M. Trzynadlowski, M.M. Bech, F. Blaabjerg and J.K. Pedersen (Sept./Oct. 1999) An Integral Space Vector PWM Technique for DSP-Controlled Voltage-Source Inverters. IEEE Trans. Ind. Appl. vol. 35(no. 5), 1091-1097.
93. A.M. Trzynadlowski, R.L. Kirlin and S.F. Legowski (Apr. 1997) Space Vector PWM Technique with Minimum Switching Losses and a Variable Pulse Rate. IEEE Trans. Ind. Elec. vol. 44(no. 2), 173-181.
94. S.N. Vukosavic and M.R. Stojic (Feb. 1998) Suppression of Torsional Oscillations in a High-Performance Speed Servo Drive. IEEE Trans. Ind. Elec. vol. 45(no. 1), 108-117.
95. Welch, R. H., “Mechanical Resonance in a Closed-Loop Servo System: Problems and Solutions,” Tutorial available from Welch Enterprises, Oakdale, MN.
96. F.W. Wilson (1999) Pneumatic Controls for Industrial Applications Books on Demand
97. S.M. Yang and S.J. Ke (1998) Performance Evaluation of a Velocity Observer for Accurate Velocity Estimation of Servo Motor Drives. Conf Rec. of IEEE IAS Annual Mtg. 1697.
98. J. Yoshitsugu, K. Inoue and M. Nakaoka (1998) Fuzzy Auto-Tuning Scheme based on α-Parameter Ultimate Sensitivity Method for AC Speed Servo System. Conf Rec. of IEEE IAS Annual Mtg. 1625.
99. G.W. Younkin, W.D. McGlasson and R.D. Lorenz (Mar./Apr. 1991) Considerations for low Inertia AC Drivers in Machine Tool Axis Servo Applications. IEEE Trans. Ind. Appl. vol. 27(no. 2), 262-268.
100. G.W. Younkin (2002) 2nd ed. Industrial Servo Control Systems: Fundamentals and Applications Marcel Dekker