Geological Engineering

Geological Engineering

Volumn , Issue , 2011, Pages 1-671

  de Vallejo, Luis I González ^a   Ferrer, Mercedes ^b   de Freitas, M H ^c  

^a UNIVERSIDAD COMPLUTENSE DE MADRID   (Spain)

^b INSTITUTO GEOLÓGICO Y MINERO DE ESPAÑA   (Spain)

^c IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85132458753     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/b11745     Document Type: Book

References (265)

1. Bock, H. et al. (2004). The Joint European Working Group of the ISSMGE, ISRM and IAEG for the definition of professional tasks, responsibilities and co-operation in ground engineering. Engineering Geology for Infrastructures Planning in Europe: A European Perspective. Hack, Azzam and Charlier, Eds. Lecture Notes in Earth Sci. Springer, Berlin, 104:1-8.
2. de Freitas, M.H. (2009). Geology; its principles, practice and potential for Geotechnics. The 9th Glossop Lecture, Geological Society of London. Ql. Jl. of Eng. Geol. and Hydrogeol., 42, 397-441.
3. Fookes, P.G. (1997). Geology for engineers: the geological model, prediction and performance. Ql. Jl. of Eng. Geol. and Hydrogeol., 30, 293-424.
4. IGME (1987). Impacto economico y social de los riesgos geologicos en Espana. Instituto Geologico y Minero de Espana (Geological Survey of Spain), Madrid.
5. Turner, A.K. (2008). Education and professional recognition of engineering geologists and geological engineers in Canada and the United States. Proc. 1st Int. Cong. on Education and Training in Geo-Engineering Sciences. Manoliu & Radulescu Eds., CRC Press, Taylor & Francis Group, London, 111-118.
6. Bennet, R.H. and Hulbert, M.H. (1986). Clay microstructure. Int. Human Resources Dep. Co. Boston, Houston, London.
7. Burland, J.B. (1988). Behavior and design of foundations. MSc Course on Soil Mechanics. Imperial College, London.
8. Capper, P.L., Cassie, W.F. and Geddes, J.D. (1974). Problems in engineering soils. E.F.N. Spon. London.
9. Day, R.W. (1999). Geotechnical and foundation engineering. McGraw-Hill.
10. Gonzalez de Vallejo, L.I., Jimenez Salas, J. A., y Leguey Jimenez, S. (1981). Engineering geology of the tropical volcanic soils of La Laguna, Tenerife. Engineering Geology, 17, pp. 1-17.
11. Hansbo, S. (1957). A new approach to the determination of the shear strength of clay by the fall-cone test. Swedish Geot. Inst. Pub. No. 14, Stockholm.
12. Lambe, T.W. and Whitman, R.V. (1979). Soil Mechanics. John Wiley & Sons. New York.
13. Lancellotta, R. (1995). Geotechnical Engineering. Taylor & Francis. The Netherlands.
14. Lupini, J.F., Skinner, A.E. and Vaughan, P.R. (1981). The drained residual strength of cohesive soils. Geotech-nique 31, no 2, pp. 181-213.
15. o-OCR relationships in soil. Journal of the Geotechnical Engineering Division. ASCE, vol. 108, GT6, pp. 851-872.
16. Powers, J.P. (1992). Construction dewatering. New methods and applications. 2nd ed. John Wiley & Sons, N.Y.
17. Schmertmann, J.M. (1955). The undisturbed consolidation of clay. Trans. ASCE, vol. 120, pp. 1201-1227.
18. Sherard, J.L., Dunnigan, L.P., Decker R.S. and Steele, E.F. (1976). Pinhole test for identifying dispersive soils. Journal of the Geotechnical Eng. Division, ASCE 102(GT1), pp. 69-85.
19. Skempton, A.W. (1954). The pore pressure coefficients A and B. Geotechnique 4(4), 143-147.
20. Skempton A.W. (1970). The consolidation of clays by gravitational compaction. Quart. J. Geol. Soc. 125, 373-412. London.
21. Tsige, M., Gonzalez de Vallejo, L.I., Doval, M. and Oteo, C. (1995). Microfabric of Guadalquivir blue marls and its engineering significance. Procc. 7th Int. Congress of Eng. Geol. IAEG. Lisbon. Balkema. Vol. II., pp. 655-704.
22. Attewell, P.B. and Farmer, I.W. (1976). Principles of engineering geology. Chapman and Hall, London.
23. Bandis, S.C., Lumsden, A.C. and Barton, N. (1981). Experimental studies of scale effects on the shear behaviour of rock joints. Int. J. of Rock Mech. and Min. Sci., Abstracts, vol. 18, pp. 1-21. Elsevier.
24. Bandis, S.C., Lumsden, A.C. and Barton, N. (1983). Fundamentals of rock joint formation. Int. J. of Rock Mech. and Min. Sci., vol. 20, no. 6. Elsevier.
25. Barton, N. (1990). Scale effects or sampling bias? In: Scale effects in rock mechanics. Cunha, A.P. (ed.). Balkema.
26. Barton, N. (1995). The influence of joints properties in modeling jointed rock masses. Keynote lecture. Proc. 8th ISRM Congress. Fuji, T. (Ed.). pp. 1023-1032. Balkema.
27. Barton, N. (2002). Some new Q-value correlations to assist in site characterization and tunnel design. Int. J. Rock Mech. & Min. Sci., 39/2, pp. 185-216.
28. Barton, N. (2006). Rock quality, seismic velocity, attenuation and anisotropy. Taylor and Francis, London.
29. Barton, N. and Choubey, V. (1977). The shear strength of rock joints in theory and practice. Rock Mechanics, vol. 10, 1/2, pp. 1-54.
30. Barton, N. and Pandey, S.K. (2010). Numerical modelling of two stoping methods used at HZL's Zawar Mines in India using FLAC 3D and degradation and mobilization of c and
31. Bieniawski, Z.T. (1973). Engineering classification of jointed rock masses. Transactions, S. African Inst. of Civil Engineers, vol. 15, no. 12, pp. 335-344.
32. Bieniawski, Z.T. (1978). Determining rock mass deformability: experience from case histories. Int. J. of Rock Mech. and Min. Sci., vol. 15, pp. 237-248.
33. Bieniawski, Z.T. (1979). The geomechanics classification in rock engineering applications. Proceedings of the 4th International Conference on Rock Mechanics. Montreux. Balkema, vol. 2, pp. 41-48.
34. Bieniawski, Z.T. (1984). Rock mechanic design in mining and tunnelling. Balkema.
35. Bieniawski, Z.T. (1989). Engineering rock mass classifications. John Wiley and Sons, Inc.
36. Blyth, E. and De Freitas, M. (1984). Geology for engineers. Edward Arnold, London.
37. Brady, B.H.G. and Brown, E.T. (1993). Rock mechanics for underground mining. 2nd ed. Kluwer Academic Publishers.
38. Coon, R.F. and Merritt, A.H. (1970). Predictingin situ modulus of deformation using rock quality indexes. Am. Soc. Test. Mater. (ASTM), Spec. Tech. Publ. 477, pp. 154-173.
39. Cunha, A.P. (1990). Scale effects in rock mechanics. In: Scale effects in rock masses. Cunha, A.P. (ed.). Balkema
40. Cunha, A.P. and Muralha, J. (1990). About LNEC experience on scale effects in the deformability of rock masses. In: Scale effects in rock masses. Cunha, A.P. (ed.). Balkema
41. Duncan, C.W. (1999). Foundations on rock. 2nd ed. E & F.N. Spon.
42. Edelbro, C. (2009). Numerical modelling of observed fallouts in hard rock masses using an instantaneous cohesion-softening friction-hardening model. Tunnelling and Underground Space Tech., 24, 4, pp. 398-409.
43. Embleton, C. and Thornes, J.B. (1979). Process in geomor-phology. Arnold, London.
44. Farmer, I.W. (1968). Engineering properties of rocks. Spon Ltd., London.
45. Gonzalez de Vallejo, L. and Hijazo, T. (2008). A new method of estimating the ratio between in situ rock stresses and tectonics based on empirical and probabilistic analysis. Engineering Geology, 101, 185-194.
46. Goodman, R.E. (1989). Introduction to rock mechanics. John Wiley & Sons.
47. Haimson, B.C. (1990). Scale effects in rock stress measurements. In: Scale effects in rock masses. Cunha, A.P. (ed.). Balkema.
48. Hajiabdolmajid, V., Martin, C.D. and Kaiser, P.K. (2000). Modelling brittle failure. Proc. 4th North American Rock Mechanics Symp. Girard, Liebman and Breeds Eds., pp. 991-998. Balkema.
49. Herget, G. (1988). Stresses in rock. Balkema.
50. Hoek, E. (1994). Strength of rocks and rock masses. Int. Soc. for Rock Mechanics New Journal 2, (2), pp. 4-16.
51. Hoek, E. and Bray, J.W. (1981). Rock slope engineering. 3rd ed. The Institution of Mining and Metallurgy, London.
52. Hoek, E. and Brown, E.T. (1980). Underground excavation in rock. The Institution of Mining and Metallurgy, London.
53. Hoek, E. and Brown, E.T. (1988). The Hoek-Brown failure criterion. A 1988 update. Rock engineering for underground excavations. Proc. 15th Canadian Rock Mechanics Symp. Curran (ed.). University of Toronto.
54. Hoek, E. and Brown, E.T. (1997). Practical estimates of rock mass strength. Int. J. of Rock Mech. and Min. Sci. Elsevier. vol. 34, no. 8, pp. 1165-1186.
55. Hoek, E., Carranza-Torres, C. and Corkum, B. (2002). Hoek-Brown criterion - 2002 edition. Proc. NARMS-TAC Conference, Toronto, 267-273.
56. Hoek, E. and Diederichs, M.S. (2006). Empirical estimation of rock mass modulus. Int. J. of Rock Mech. and Min. Sci., 43, pp. 203-215.
57. Hoek, E., Kaiser, P.K. and Bawden, W.F. (1995). Support of underground excavations in hard rocks. Balkema.
58. Hoek, E. and Marinos, P. (2000). Predicting tunnel squeezing. Tunnels and Tunnelling Int. Part 1, v. 32:11, pp. 45-51.
59. Hoek, E., Marinos, P. and Benissi, M. (1998). Applicability of the Geological Strength Index (GSI) classification for very weak and sheared rock masses. The case of the Athens Schist Formation. Bull. Eng. Geol. Env. 57(2), 151-160.
60. Hudson, J.A. and Cornet, F.H. (2003). Rock stress estimation. Int. Soc. for Rock Mechanics. Suggested methods and associated supporting papers. Special issue of the Int. J. of Rock Mech. and Min. Sci., vol. 4, issues 7-8.
61. Hudson, J.A. and Harrison, J.P. (2000). Engineering rock mechanics. An introduction to the principles. Perga-mon Press.
62. ISRM (1979). Suggested methods for determining the uni-axial compressive strength and deformability of rock materials. ISRM Commission on standardization of laboratory and field tests. Int. J. of Rock Mech. and Min. Sci., Geomechanical Abstracts, vol. 16.
63. ISRM (1981). Rock characterization. Testing and monitoring. Int. Soc. for Rock Mechanics. Suggested methods. Brown, E.T. (ed.). Commission on testing and monitoring, ISRM. Pergamon Press.
64. Jaeger, J.C. and Cook, N.G.W. (1979). Fundamentals of rock Mechanics. 3rd ed., Chapman and Hall, London.
65. Johnson, R.B. and De Graff, J.V. (1988). Principles of engineering geology. John Wiley & Sons.
66. Kim, K. and Franklin, J.A. (1987). Suggested methods for rock stress determination. Int. J. of Rock Mech. and Min. Sci. Geomechanical abstracts. 24-1, pp. 53-73.
67. Leeman, E.R. (1970). Experience throughout the world with the CSIR –doorstopper— rock stress measurement equipment. 2nd Congress ISRM, Belgrade. vol. 2 pp. 4-6.
68. Martin, C.D., Read, R.S. and Chandler, N.A. (1990). Does scale influence in situ stress measurements? Some findings at the underground research laboratory. In: Scale effects in rock masses. Cunha, A.P. (ed.). Balkema.
69. Natau, O. (1990). Scale effects in the determination of the deformability and strength of rock masses. In: Scale effects in rock masses. Cunha, A.P. (ed.). Balkema.
70. Patton, F.D. (1966). Multiple modes of shear failure in rock. Proceedings 1st Congress on Rock Mechanics, ISRM, Lisbon. vol. 1, pp. 509-513.
71. Rahn, P.H. (1986). Engineering geology. An environmental approach. Elsevier.
72. Selmer-Olsen, R. and Broch, E. (1977). General design procedure for underground openings in Norway. Rock-storage 77. 1st Int. Symp. on Storage in Excavated Rock Caverns, Sweden. vol. 2 (11-22).
73. Serafim, J.L. and Pereira, J.P. (1983). Considerations of the geomechanical classification of Bieniawski. Proceedings Int. Symp. on Engineering Geology and Underground Construction, Lisbon. Balkema.
74. Serrano, A. and Olalla, C. (1998). Ultimate bearing capacity of an anisotropic discontinuous rock mass. Parts 1 and 2. Int. J. of Rock Mech. and Min. Sci., vol. 35, 3, pp. 301-348.
75. Sheorey, P.R. (1997). Empirical rock failure criteria. Balkema.
76. Singhal, B.B.S. and Gupta, R.P. (1999). Applied hydro-geology of fractured rock masses. Kluwer Academic Publishers.
77. Walthan, A.C. (1999). Foundations of engineering geology. E & F.N. Spon.
78. Wawersick, W.R. and Fairhurst, C. (1970). A study of brittle rock failure in laboratory compression experiments. Int. J. of Rock Mech. and Min. Sci., vol. 7, no. 5. pp. 561-575.
79. Zhang, L. and Einstein, H.H. (2004). Using RQD to estimate the deformation modulus of rock masses. Int. Journal of Rock Mechanics and Mining Sciences, 41, pp. 337-341.
80. Fetter, C.W. (2001). Applied hydrogeology. 4th ed. Prentice Hall International. London.
81. Freeze, R.A. and Cherry, J.A. (1979). Groundwater. Prentice Hall. U.S.A.
82. McDonald, M.G. and Harbaugh, A.W. (1988). A modular three-dimensional finite difference ground-water flow model: U.S. Geological Survey Techniques of Water Resources Investigations, Book 6, Chapter A1.
83. Rushton, K.R. (2003). Groundwater hydrology: conceptual and computational models. Wiley.
84. Schwartz, F.W. and Zang, H. (2003). Fundamentals of ground water. John Wiley & Sons.
85. Todd, D.K. and Mays, L.W. (2005). Groundwater hydrology. Wiley.
86. Barton, N. (1981). Shear strength investigations for surface mining. 3rd Int. Conf. on Stability Surface Mining. Vancouver.
87. Brady, B.H.G. and Brown, E.T. (1985). Rock mechanics for underground mining. George Allen and Unwin, London.
88. ISRM (1981). Rock characterization. Testing and monitoring. Int. Soc. for Rock Mechanics. Suggested methods. Brown, E.T. (Ed.). Commission on testing and monitoring, ISRM. Pergamon Press.
89. BSSC - Building Seismic Safety Council (1998). 1997 Edition. NEHRP Recommended provisions for seismic regulation for new buildings, FEMA 302/303, developed for the Federal Emergency Management Agency, Washington, D.C.
90. Clayton, C.R.I., Matthews, M.C. and Simons, N.E. (1995). Site investigation. Blackwell Science.
91. Dahlberg, R. (1974). A comparison between the results from Swedish penetrometers and standard penetration test. Results in sand. ESOPT, 2:2.
92. de Freitas, M.H. (1992). Site investigation. MSc Lecture Notes. Universidad Complutense de Madrid. (Unpublished)
93. de Mello, V.F.B. (1971). The standard penetration test. Proc. 4th Pan-American Congress on Soil Mechanics and Foundation Engineering. Vol. I, pp. 1-86. Puerto Rico.
94. Fookes, P.G. (1997). Geology for engineers: the logical model; prediction and performance. The First Glossop Lecture. Geological Society of London. Ql. Jl. Engineering Geology, Vol. 30, no. 4, pp. 293-424.
95. ISRM - Int. Soc. of Rock Mechanics. Commission on Testing Methods (1985). Suggested method for determining point load strength. Int. J. Rock Mech. Min. Sci. and Geomech. Abstr. 22, 51-60.
96. Kim, K. and Franklin, J.A. (1987). Suggested methods for rock stress determination. Int. Journal Rock Mech. Min. Sci. and Geomech. Absts., 24-1, pp. 53-74.
97. Landsat Data Users Notes (1993). EOSAT. Vol. 8, no. 2. http://landsat.org.
98. Photogrammetric engineering and remote sensing (2000). Amer. Soc. of Photogrammetric and Remote Sensing, Vol. 66, no. 4.
99. Robertson, P.K. and Campanella, R.G. (1983). Interpretation of cone penetration test. Part I. Sand. Canadian Geo-technical Journal, 20, 4, pp. 718-733.
100. Schmertmann, J.K. (1978). Guidelines for cone penetration test performance and design. U.S. Dept of Transportation, Federal Highway Administration, Offices of Research and Development. Report No. FHWA-TS-78-209.
101. Thornburn, S. (1963). Tentative correction chart for the standard penetration test in non-cohesive soils. Civ. Eng. and Public Works 58; 683: 752-753.
102. Tyrell, A.P., Lake, L.M. and Parsons, A.W. (1983). An investigation of the extra costs arising on highway contracts. TRRL Supplementary Report SR 814, Transport and Road Research Laboratory. U.K.
103. Barton, N. and Choubey, V. (1977). The shear strength of rock joints in theory and practice. Rock Mechanics, vol. 10, no. 1, pp. 1-54.
104. BSI (1999). BS5930:1999. Code of practice for site investigations. Bristish Standard Institution. London.
105. BSI (2003). BS EN ISO 14689-1. Geotechnical investigation and testing. Identification and classification of rock. British Standard Institution. London.
106. Hudson, J.A. (1989). Rock mechanics principles in engineering practice. Butterworths. Ciria, London.
107. ISRM (1981). Suggested methods for rock characterization, testing and monitoring. ISRM Suggested methods. Ed. E.T. Brown. Pergamon Press.
108. Priest, S.D. and Hudson, J. (1976). Discontinuity spacing in rock. Int. J. Rock Mech. Min. Sci. and Geomech. Abstr. 13, pp. 135-148.
109. Dearman, W.R. (1991). Engineering geological mapping. Butterworth-Heinemann. London.
110. Geological Society of London (1972). The preparation of maps and plans in terms of engineering geology. Report by the Geological Society Engineering Group Working Party. Quarterly Journal of Engineering Geology, vol. 5, pp. 297-367.
111. Gonzalez de Vallejo, L. (1977). Engineering geology for urban planning and development with an example from Tenerife (Canary Islands). Bull. of the IAEG, no. 15, pp. 37-43.
112. IAEG (1981a). Rock and soils description and classification for engineering geological mapping. Report by the IAEG Commission on Engineering Geological Mapping. Bull. of the IAEG, no. 24, pp. 235-274.
113. IAEG (1981b). Recommended symbols for engineering geological mapping. Report by the IAEG Commission on Engineering Geological Mapping. Bulletin of the IAEG, no. 24, pp. 227-234.
114. IGME (1972). Mapa geotecnico general de Toledo. Hoja 53. Escala 1:200.000.
115. IGME (1987). Mapa geotecnico y de riesgos geologicos de la ciudad de Zaragoza. Escala 1:25.000 y 1:5.000.
116. IGME-COPOT (2000). Mapa geotecnico y mapas de peli-grosidad natural de la ciudad de Cartagena. Escala 1:15.000.
117. Proske, H., Vlcko, J., Rosenbaum, M.S., Dorn, M., Culshaw, M. and Marker, B. (2005). Special purpose mapping for waste disposal sites. Report of IAEG Commission 1: Engineering Geological Maps. Bull. of Engineering Geology and the Environment, vol. 64, no. 1, pp. 1-54.
118. Ruiz Vazquez, M. y Gonzalez Huesca, S. (2000). Geologia apli-cada a la ingenieria civil. Ed. Limusa Noriega. Mexico.
119. UNESCO-IAEG (1976). Engineering geological mapping. A guide to their preparation. Commission on Engineering Geological Maps of the IAEG. Earth Sciences, 15. The UNESCO Press.
120. Bjerrum, L. (1973). Problems of soil mechanics and construction on soft soils. 8th ICSMFE. Moscow. Vol. 2, pp. 27-34.
121. Burland, J.B., Broms, B. and de Mello, V.F.B. (1977). Behaviour of foundations and structures. State-of-the-art report. Session 2. Proc. 9th ICSMFE. Tokyo. Vol. 2, pp. 495-546.
122. Burland, J.B. and Burbridge, M.C. (1985). Settlement of foundations on sand and gravel. Proc. Institution of Civil Engineers, 78, pp. 1325-81.
123. Eurocode 7 (1997). Geotechnical design (distributed through the national organisations responsible for Standards in their country).
124. Fadum, R.E. (1948). Influence values for estimating stresses in elastic foundations. Proceedings. 2nd Int. Conference on Soil Mechanics and Foundations Engineering. Vol. 1, 77-84.
125. Hansen, J.B. (1970). A revised extended formula for bearing capacity. Danish Geotechnical Institute Bulletin, no. 28.
126. Hoek, E. and Brown, E.T. (1980). Underground excavations in rock. Inst. of Mining and Metallurgy. London.
127. Oteo, C. (1980). Pilotajes. In: Jimenez Salas et al., Geotecnia y cimientos III. Cap. 3. Rueda. Madrid.
128. Peck, R.B., Hanson, W.E. and Thornburn, T.H. (1967). Foundation engineering, 2nd ed. John Wiley and Sons, New York.
129. Skempton, A.W. (1951). The bearing capacity of the clay. Proceedings of Building Research Congress. Vol. 1, 180-185.
130. Serrano, A. and Olalla, C. (1996). Allowable bearing capacity in rock foundations based on a non linear criterion. Int. Jl. Rock Mech. and Min. Sc. Vol. 33, 4, pp. 327-345.
131. Serrano, A. and Olalla, C. (1998). Ultimate bearing capacity of an anisotropic discontinous rock mass. Part I: Basic modes of failure. Part II: Determination procedure. Int. Jl. Rock Mech. and Min. Sci. Vol. 35, no. 3, pp. 301-348.
132. Tomlinson, M.J. (2001). Foundation design and construction. Prentice Hall. 7th ed. Harlow, Essex.
133. Wyllie, D.C. (1999). Foundations in rock. 2nd ed. FN Spon, London.
134. Bishop, A.W. (1955). The use of the slip circle in the stability analysis of slopes. Geotechnique, vol. 5 (1), pp. 7-17. London.
135. CANMET (Canada Center for Mineral and Energy Technology, (1977). The pit slope manual. Ministry of Supply and Services, Canada.
136. Cavers, D.S. (1981). Simple methods to analyze buckling of rock slopes. Rock Mechanics, vol. 2, pp. 87-104.
137. Goodman, R.E. and Bray, J.W. (1976). Toppling of rock slopes. Proceedings of the Speciality Conference on Rock Engineering for Foundations and Slopes. ASCE, vol. 2. Colorado.
138. Hadjigeorgiou, J. and Scoble, M. (1990). Ground characterization for assessment of case of excavation. Mine planning and equipment selection. Calgary, Canada.
139. Hoek, E. and Bray, J.W. (1981). Rock slope engineering. Institution of Mining and Metallurgy. London.
140. Jimenez Salas, J.A., De Justo, J.L. and Serrano, A.A. (1976). Geotecnia y cimientos, II. Editorial Rueda. Madrid.
141. John, K. (1968). Graphical stability analysis of slopes in jointed rock. Proceedings ASCE, vol. 94, no. SM2.
142. Lumb, P. (1975). Slope failures in Hong Kong. Ql. Jr. Engineering Geology, no. 8, pp. 31-65.
143. Piteau, D.R. and Martin, D.C. (1982). Mechanics of rock slope failure. Third International Conference on Stability in Surface Mining. Brawner C.O. Ed., pp. 113-171. Vancouver.
144. Romana, M. (1993). A geomechanical classification for slopes: Slope Mass Rating. Comprehensive rock engineering: principles, practice and projects. J.A. Hudson Ed. Volume 3: Rock testing and site characterization. Pergamon Press, Oxford, U.K.
145. Simons, N., Menzies, B. and Matthews, M. (2001). Soil and rock slope engineering. Thomas Telford. London.
146. Singh, R. and Denby, B. (1989). Aspects of ground preparation by mechanical methods in surface mining. Symposium on Surface Mining. Future concepts. Nottingham, England.
147. Taylor, R.D. (1948). Soil mechanics. John Wiley & Sons. New York.
148. Wyllie, D.C. and Mah, C.W. (2004). Rock slope engineering: civil and mining. 4th ed. Taylor and Francis. U.K.
149. Barton, N., Lien, R. and Lunde, J. (1974). Engineering classification of rock masses for the design of tunnel support. Rock Mechanics, 6, 189-239. Springer Verlag.
150. Barton, N. (2000). TBM Tunnelling in jointed and faulted rock. Balkema, Rotterdam.
151. Bienawski, Z.T. (1979). The geomechanics classification in rock engineering applications. Proc. 4th Int.Conference on Rock Mechanics. Montreaux, vol. 2, 41-48. Balkema.
152. Bienawski, Z.T. (1989). Engineering rock mass classifications. John Wiley and Sons.
153. Bienawski, Z.T., Celada, B., Galera, J.M. and Alvarez, M. (2006). Rock mass excavability indicator. New way to select the optimum tunnel construction method. Tunnelling and Underground Space Technology, 21, 3-4.
154. Franklin, J. (1974). Rock quality in relation to the quarrying and performance of rock construction materials. 2nd Int. Conf of the IAEG, IV-PC-2. Sao Paulo.
155. Gonzalez de Vallejo, L.I. (2003). SRC rock mass classification of tunnels under high tectonic stress excavated in weak rocks. Engineering Geology, 69, 273-285.
156. Gonzalez de Vallejo, L.I. and Hijazo, T. (2008). A new method of estimating the ratio between in situ rock stresses and tectonic based on empirical and probabilistic analysis. Engineering Geology, 101, 185-194.
157. Goodman, R.E., Moye, D.G., Van Schalkwyk, A. and Javandel, I. (1965). Ground water inflow during tunnel driving. Bull. Assoc. Engineering Geologists, vol. 2(1), 39-56.
158. Hansen, L. and Martna, J. (1988). Influence of faulting on rock excavation. Inter. Symp. on Rock Mechanics and Power Plants. ISRM, Madrid, vol. 1, 317-324. Balkema.
159. Heidbach, O., Tingay, M., Barth, A., Reinecker, J., Kurfeb, D. and Muller, B. (2008). The release 2008 of the World Stress Map (www.world-stress-map.org).
160. Hoek, E. and Brown, E.T. (1980). Underground excavations in rock. Institution of Mining and Metallurgy, London.
161. Hoek, E. and Diederichs, M.S. (2006). Empirical estimation of rock mass modulus. Int. Journal of Rock Mechanics and Mining Sciences, 43, 203-215.
162. Hoek, E. and Marinos, P. (2000). Predicting tunnel squeezing problems in weak heterogeneous rock masses. Part 1: estimating rock mass strength. Part 2: estimating tunnel squeezing problems. Tunnels and Tunnelling Int. 32/1 1, 45-51 and 32/12, 33-36.
163. Hoek, E. and Marinos, P.G. (2009). Tunnelling in overstressed rock. In: Rock Engineering in difficult Ground Conditions. Vrkjan (ed). Taylor and Francis, pp. 44-60.
164. ISRM (2003). Suggested methods for rock stress estimation. Part 1, 2, 3 and 4. Int. Soc. for Rock Mechanics (www. isrm.net).
165. Schimazek, J. and Knatz, H. (1970). The influence of rock composition on cutting velocity and chisel wear of tunnelling machines (in German). Gluckauf 106: 113-119.
166. Sheorey, P.R. (1994). A theory for in situ stresses in isotropic and transversely isotropic rock. Int. Jl. Rock Mech. Mining Sci., 31, 23-24.
167. Singh, B. (1993). Indian experience of squeezing ground and experiences of application of Barton's Q-system. Workshop on Norwegian Method of Tunnelling, CSMRS, New Delhi.
168. Sing, B., Jethwa, J.C. and Dube, A.K. (1992). Correlation between observed support pressure and rock mass quality. Tunnelling and Underground Space Tech., 7, 59-74.
169. Waggoner, E.B. and Daugharty, C.W. (1985). Geologic site investigations for tunnels. Underground Space, 9, 109-119.
170. Attewell, P.B. and Farmer I.N. (1976). Principles of engineering geology. Chapman and Hall, London.
171. Foyo, A., Sanchez, M.A. and Tomillo, C. (2005). A proposal for a secondary permeability index obtained from water pressure test in dam foundations. Engineering Geology, pp. 77, 69-82.
172. Gupta, H.K. (2002). A review of recent studies of triggered earthquake by artificial water reservoirs with special emphasis on earthquakes in Koyna, India. Earth-Sciences Reviews, 58, pp. 279-310.
173. Hsein Juang, C. (Ed). (2004). Reconnaissance of the Chi-Chi earthquake, Taiwan. Engineering Geology, Special Issue, 1-2, pp. 1-179.
174. Kanji, M.A. (1994). Engineering geological impacts on the design and construction of dams. Keynote Lecture, 7th Int. Conf. of the IAEG, Lisbon.
175. International Commission on Large Dams (ICOLD) (1993). Rock foundations for dams. ICOLD Bull. 88. Paris.
176. International Commission on Large Dams (ICOLD) (1998). Neotectonics and dams. Guideless and case histories. Bull. 112. Paris.
177. McGarr, A., Simpson, D. and Seeber, L. (2002). Case histories of induced and triggered seismicity. International Handbook of Earthquake and Engineering Seismology, Part A. Lee, Kanamori, Jennings and Kisslinger Eds. Academic Press, pp. 647-661.
178. Olalla, C. and Cuellar, V. (2001). Failure mechanism of the Aznalcollar Dam, Seville, Spain. Geotechnique, 51, pp. 399-406.
179. Oliveira, R. (1985). Consolidation of the foundation rock mass of Cambambe Dam (Angola). Proceedings XV ICOLD Congress, vol. IV. Lausanne.
180. Oliveira, R. (1988). Geotechnical characteristic required for concrete dam rock foundations. Proc. XVI ICOLD Congress, vol. V. San Francisco, USA.
181. Semenza, E. and Ghirotti, M. (2000). History of the 1963 Vaiont slide; the importance of geological factors. Bull. Engineering Geology and Environment, 59, pp. 87-97.
182. Shimizu, S., Jojima, S. and Niida, Y. (1985). Design and execution of foundation grouting for multipurpose dams in Japan. XV ICOLD, vol. 3, pp. 429-453.
183. Lausanne. Simpson, D.W. (1986). Triggered earthquakes. Ann. Rev. Earth Planet. Sci., 14, pp. 21-42.
184. Wahlstrom, E.E. (1974). Dams, dam foundation and reservoirs. Elsevier, Amsterdam.
185. Wittke, W. (1990). Rock mechanics. Springer-Verlag, Berlin.
186. Wyllie, D.C. (1999). Foundations on rock. 2nd ed. E.F.N. Spon, New York.
187. Bell, F.G. (2007). Geological materials used in construction. In: Engineering Geology, Chap. 6. Elsevier. 2nd ed.
188. Ladd, C.C. and Foott, R. (1977). Foundation design of embankments on varved clays. U.S. Department of Transportation. FHWA - Report No. TS-77-214. Washington.
189. Oteo, C. and Sopena, L. (1994). Embankment foundations on very soft soils at Medinaceli (Spain). XIV Int. Cong. on Soil Mechanics and Foundation Engineering, New Delhi, Vol. II.
190. Pilot, G. and Moreau, M. (1973). La stabilite des remblais sur sols mous. Collection du Laboratoire central des ponts et chaussees. Eyrolles, Paris.
191. U.S. Bureau of Reclamation (1998). Earth Manual. Part 1. 3rd ed. U.S. Department of the Interior, Denver, Colorado.
192. Alonso, E. (1987). Riesgos geologicos asociados a las aveni-das y su prevision. In: Avenidas. Sistemas de prevision y alarma. Berga and Dolz (Eds). Colegio de Ingenieros de Caminos. Madrid, pp. 37-58.
193. Casale, R. and Margottini, C., Eds. (1995). Meteorological events and natural disaster. Report on a CEC field mission in Piedmont, 4-6 November 1994. Enea-Civita Consorcio. Italy.
194. Corominas, J. and Garcia-Yague, A. (1997). Terminologia de los movimientos de ladera. IV Simposio Nacional sobre Taludes y Laderas Inestables. Granada, Vol. III, 1051-1072.
195. Corominas, J., Remondo, J., Farias, P., Estevao, M. and Zezere, J.et al. (1996). Debris Flow. In: Landslide recognition. Identification, movement and causes. Dikau, Brunsden, Schrott and Ibsen (Eds). John Wiley & Sons, pp. 161-180.
196. Cruden, D.M. and Varnes, D.J. (1996). Landslide types and processes. In: Landslides. Investigation and mitigation. Turner and Schuster (Eds). Special Report 247. Transportation Research Board. National Academy Press. U.S.A. Chapter 3.
197. Dikau, R., Brundsen, D., Schrott, L. and Ibsen, M.L. (1996). Introduction. In: Landslide recognition. Identification, movement and causes. Dikau, Brundsen, Schrott and Ibsen (Eds). John Wiley & Sons, pp. 1-12.
198. EPOCH (1993). Flageolet, J.C. (Ed). Temporal occurrence and forecasting of landslides in the European Community, vol. 1. Contract no. 90.0025.
199. Ferrer, M. and Ayala, F. (1997). Relaciones entre desenca-denamiento de movimientos y condiciones mete-orologicas para algunos deslizamientos en Espana. IV Simposio Nacional sobre Taludes y Laderas Inestables. Granada. Vol. I, 185-197.
200. Gostelow, T.P. (1991). Rainfall and landslides. In: Prevention and control of landslides and other mass movements. Almeida-Teixeira, Fantechi, Oliveira and Gomes Coe-lho (Eds), CEC Report EUR 12918 EN, pp. 139-161.
201. Hutchinson, J.N. (1983). Methods of locating slip surfaces in landslides. Bulletin Association Engineering Geologists. Vol. XX, no. 3, pp. 235-252.
202. Hutchinson, J.N. (1988). General Report: Morphological and geotechnical parameters of landslides in relation to geology. Proc. 5th Int. Symposium on Landslides, Lausanne. Vol. 1, pp. 3-36.
203. Keaton, J.R. and De Graff, J.V. (1996). Surface observation and geologic mapping. In: Landslides. Investigation and mitigation. Turner and Schuster (Eds). Special Report 247. Transportation Research Board. National Academy Press. U.S.A. Chapter 9.
204. Murk, B.W., Skinner, B.J. and Porter, S.C. (1996). Environmental geology. John Wiley & Sons.
205. Schuster, R.L. (1996a). Socio-economic significance of landslides. In: Landslides. Investigation and mitigation. Turner and Schuster (Eds). Special Report 247. Transportation Research Board. National Academy Press. U.S.A. Chapter 2.
206. Schuster, R.L. (1996b). The 25 most catastrophic landslides of the 20th century. In: Landslides. Proceedings of 8th International Conference and Field trip on Landslides. Chacon, Irigaray and Fernandez (Eds). pp. 53-62.
207. Soeters, R. and Van Westen, C.J. (1996). Slope instability recognition, analysis and zonation. In: Landslides. Investigation and mitigation. Turner and Schuster (Eds). Special Report 247. Transportation Research Board. National Academy Press. U.S.A. Chapter 8.
208. Sowers, G.F. and Royster, D.L. (1988). Field Investigation. In: Landslides. Analysis and control. Schuster and Krizek (Eds). Transportation Research Board. Special Report 176. 5th printing. National Academy of Sciences. U.S.A. Chapter 4.
209. Varnes, D.J. (1984). Landslide hazard zonation: a review of principles and practice. Natural Hazards 3, UNESCO.
210. Varnes, D.J. (1988). Slope movement types and processes. In: Landslides. Analysis and control. Schuster and Krizek (Eds). Transportation Research Board. Special Report 176. 5th printing. National Academy of Sciences. U.S.A. Chapter 2.
211. Walthan, A.C. (1989). Ground subsidence. Blackie. Chapman & Hall.
212. AFPS (1990). Recommandations pour la redaction de regies relatives aux ouvrages et installations a realiser dans les regions sujettes aux seismes. Ecole Nationale des Ponts et Chaussees, Paris.
213. Ambraseys, N.N. (1988). Engineering seismology. Earthquake Engineering and Structural Dynamics, 17, 1-105.
214. Ambraseys, N.N. (1990). Uniform magnitude re-evaluation of European earthquakes associated with strong-ground motion records. Earthquake Engineering and Structural Dynamics, 19, 1-20.
215. Ambraseys, N.N., Simpson, K.A. and Bommer, J.J. (1996). Prediction of horizontal response spectra in Europe. Earthquake Engineering and Structural Dynamics, 25, 371-400.
216. Berryman, K. and Beanland, S. (1991). Variation in fault behaviour in different tectonic provinces of New Zealand. Journal of Structural Geology, 13 (2), 177-189.
217. Bommer, J.J. and Boore, D.M. (2004). Engineering seismology. In: Encyclopaedia of Geology. Elsevier.
218. Coburn, A.W. and Spence, R.J. (1992). Earthquake protection. John Wiley & Sons, New York.
219. Cornell, C.A. (1968). Engineering seismic risk analysis. Bull. Seism.. Soc. America, vol. 58, 5 pp. 1533-1606.
220. Crone, A.J., Machette, M.N. and Bowman, J.R. (1992). Geologic investigations of the 1988 Tennant Creek, Australia, earthquakes. Implications for paleoseis-micity in stable continental regions. U. S. Geol. Sur. Bull., 2032-A, 1-51.
221. Douglas, J. (2003). Earthquake ground motion estimation using strong-motion records: a review of equations for the estimation of peak ground acceleration and response spectral ordinates. Earth Science Reviews, 61, 43-104.
222. Dowrick, D.J. (2000). Earthquake resistant design. John Wiley & Sons, London, 2nd Ed.
223. Eurocode-8 (2001). Design of structures for earthquake resistance. Part 5: Foundations, Retaining structures and Geotechnical Aspects.
224. Garcia-Mayordomo, J., Faccioli, E. and Paolucci, R. (2004). Comparative study of the seismic hazard assessments in European National Seismic Codes. Bulletin of Earthquake Engineering, 2, 51-73.
225. Giardini, D., Jimenez, M.J. and Grunthal, G. (Eds) (2003). The ESC-SESAME European-Mediterranean Seismic Hazard Map, scale 1:5,000,000. ETH-CSIC-GFZ, Zurich.
226. Gonzalez de Vallejo, L.I. (1994). Seismotectonic hazard for engineering projects in moderate seismic regions. Keynote Lecture. 7th Inter. IAEG Congress, vol. III, pp. XIX-XXXVIII. Lisbon. Balkema.
227. Gonzalez de Vallejo, L.I., Garcia-Mayordomo, J. and Insua, J.M. (2006). Probabilistic seismic hazard assessment of the Canary Islands. Bulletin of the Seismological Society of America, 96(6), 2040-2049.
228. Grunthal, G. (Ed.) (1998). European macroseismic scale. European Seismological Commission. Cahiers du Centre Europeen de Geodynamique et de Seismologie, Luxembourg, vol. 15, 99 pp.
229. Gutenberg, B. and Richter, C.F. (1954). Seismicity of the Earth and associated phenomena. Princeton University Press, 2nd Ed.
230. Hanks, T.C. and Kanamori, H. (1979). A moment magnitude scale. Journal of Geophysical Research, 84(B5), 2348-2350.
231. Hays, W. (1990). Earthquake vulnerability. Cooperative Project for Seismic Risk Reduction in the Mediterranean Region. UNDP/OPS/UNDRO, Trieste.
232. Ho, C.L. and Kavazanjian, E. (1986). Probabilistic study of SPT liquefaction analysis. Proc. In Situ '86, ASCE Conference on Use of In-Situ Tests in Geotechnical Engineering, Blacksburg, Virginia, ASCE Geotechnical Special Pub. No. 6, 602-616.
233. Keller, E.A. and Pinter, N. (1996). Active tectonics. Earthquakes, uplift and landscape. Prentice Hall.
234. Kramer, S.L. (1996). Geotechnical earthquake engineering. Prentice Hall.
235. McCalpin M. (Ed.) (1996). Paleoseismology. Academic Press, 588 pp.
236. Nuttli, O. (1985). Average seismic source parameters relations for plate margin earthquakes. Tectonophysics, 118, 161-174.
237. Obermeier, S.F. (1996). Use of liquefaction-induced features for paleoseismic analysis. Engineering Geology, 44, 1-76.
238. Obermeier, S.F. (2005). Paleoliquefaction and appraisal of earthquake hazards. In: Obermeier (Ed). Special Issue. Engineering Geology 76, 3-4.
239. Pierce, K.L. (1986). Dating methods. In: Active Tectonics. Studies in Geophysics. National Academic Press, Washington, D.C., 195-214.
240. Reiter, L. (1990). Earthquake hazard analysis. Columbia University Press. New York.
241. Rueda, J. and Mezcua, J. (2001). Seismicity, seismotectonic and seismic hazard in Galicia (in Spanish). Publicacion Tec-nica, 35. Instituto Geografico Nacional. Madrid. 64 pp.
242. Sabetta, F. and Pugliese, A. (1987). Attenuation of peak horizontal acceleration and velocity from Italian strong-ground motion records. Bulletin of the Seismological Society of America, 77(5), 1491-1511.
243. Sabetta, F. and Pugliese, A. (1996). Estimation of response spectra and simulation of nonstationary earthquake ground motions. Bulletin of the Seismological Society of America, 86(2), 337-352.
244. Schenk, V., Mantlik, F., Zhizhin, M.N. and Tumarkin, A.G. (1990). Relation between macroseismic intensity and instrumental parameters of strong motions - a statistical approach. Natural Hazards, 3, 2, 111-124.
245. Schnabel, P.B., Lysmer, J. and Seed, H.B. (1972). A computer program for earthquake response analysis of horizontally layered sites. Rep. EERC 72-12. University of California at Berkeley.
246. Scholz, C.H. (1990). The mechanics of earthquakes and faulting. Cambridge University Press.
247. Seed, H.B. and Idriss, I.M. (1971). Simplified procedure for evaluating soil liquefaction potential. Jl. of Soil Mech. and F. Div. ASCE, vol. 97 SM 7.
248. Seed, H.B., Ugas, C. and Lysmer, J. (1974). Site-dependent spectra for earthquake-resistant design. Rep. EERC 74-12. University of California at Berkeley.
249. Sibson, R.H. (1983). Continental fault structure and shallow earthquake source. Jl. Geol. Soc. London, 140: 747-767.
250. Stirling, M., Rhoades, D. and Berryman, K. (2002). Comparison of earthquake scaling relations derived from data of the Instrumental and preinstrumental era. Bulletin of the Seismological Society of America, 92(2), 812-830.
251. Trifunac, M.D. and Brady, A.G. (1975). A study on the duration of strong earthquake ground motion. Bulletin of the Seismological Society of America, vol. 65, 3, 581-626.
252. USNRC (1997a). Seismic and geologic siting criteria for nuclear power plants. Appendix A. 10 C.F.R.E. Part 100.
253. USNRC (1997b). Identification and characterization of seismic sources, deterministic source earthquakes and ground motions. Regulatory Guide 1165.
254. Villamor, P. and Berryman, K.R. (1999). La tasa de despla-zamiento de una falla como aproximacion de primer orden en las estimaciones de peligrosidad sismica. 1er Congreso Nac. Ingenieria Sismica, Murcia, Spain, 153-163. Spanish Assoc. Earthquake Engineering, Madrid.
255. Wang, J.G.Z.Q. and Law, K.T. (1994). Siting in earthquake zones. Balkema.
256. Wald, D., Quitoriano, V., Heaton, T. and Kanamori, H. (1999). Relationships between peak ground acceleration, peak ground velocity and Modified Mercalli intensity in California. Earthquake Spectra 15(3), 557-564.
257. Wells, D.L. and Coppersmith, K.J. (1994). New empirical relationships among magnitude, rupture length, rupture width, rupture area and surface displacement. Bulletin of the Seismological Society of America, 84(4), 974-1002.
258. Youd, T.L. and Idriss, I.M. (2001). Liquefaction resistance of soils. Summary report from the 1996 NCEER and 1998 NCEER/NSF Workshops on Evaluation of Liquefaction Resistance of Soils. ASCE. Jl. of Geotech. and Geoenvironmental Engineering, vol. 127, 4, 297-313.
259. Bell, F.G. (2003). Geological hazards. Their assessment, avoidance and mitigation. E & FN Spon, London.
260. Hoek, E. (1991). When is a design in rock engineering acceptable?. Proc. 7th Int. Conf. on Rock Mechanics. ISRM. Aachen, Germany. Vol. 3, pp. 1485-1497.
261. ISDR (2009). International Strategy for Disaster Reduction. www.unisdr.org.
262. Morgenstern, N.R. (1991). Limitations of stability analysis in geotechnical practice. Geotecnia, 61, pp. 5-19.
263. Murck, B.W., Skinner, B.J. and Porter, S.C. (1996). Environmental Geology. John Wiley and Sons.
264. Smith, K. (2001). Environmental hazards. Assessing risk and reducing disaster. 3rd Ed. Routledge, London.
265. Varnes, D.J. (1984). Landslide hazard zonation: a review of principles and practice. UNESCO.