Infrastructure health in civil engineering: Theory and components

Infrastructure Health in Civil Engineering: Theory and Components

Volumn , Issue , 2016, Pages 1-624

  Ettouney, Mohammed M ^a   Alampalli, Sreenivas ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85129113703     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (422)

1. ACI (2008). Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, MI.
2. ASCE, (2009), http://ciasce.asce.org/working-definitions, site accessed on March 20, 2009.
3. Catbas, F. N., Grimmelsman, K. A., and Aktan, A. E., (2000) "Bridge Health-Monitoring for Structural Performance, " Structural Materials Technology: An NDT Conference, ASNT, Atlantic City, NJ.
4. nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
5. st International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
6. DeWolf, J., Mao, J., and Virkler, C., (2002) "Non-Destructive Monitorinh of Bridges in Connecticut, " Proceedings, NDE Conference on Civil Engineering, ASNT, Cincinnati, OH.
7. nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
8. Ettouney, M. and Alampalli, S., (2012) Infrastructure Health in Civil Engineering: Applications and Management, CRC Press, Boca Raton, FL.
9. Fisk, P., Abrams, M., Kaufman, S., (2008) "Inspection and Rehabilitation of Jamestown-Verrazzano Segmental Concrete Bridge, " NDE/NDT for Highway and Bridges: Structural Materials Technology (SMT), ASNT, Oakland, CA.
10. nd International Workshop on Structural Health Monitoring, Stanford University, Stanford, CA.
11. Gangone, M., Kroening, R., Minnetyan, L., Janoyan, K., and Grimmke, W., (2005) "Evaluation of FRP Rebar Reinforced Concrete Bridge Deck Superstructure, " Proceedings of the 2005 ASNT Fall Conference, Columbus, OH.
12. st International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
13. Hawk, H., and Small, E. P., (1998) "The BRIDGIT bridge management system. " Structural Engineering International, (4), 309-314. International Association of Bridge and Structural Engineering (IABSE), Zurich, Switzerland.
14. Johnson, W., and Bell, R., (2008) "Comparing Manual AWS UT Inspection to Automated TOFD and Pulse Echo Inspection, " NDE/NDT for Highway and Bridges: Structural Materials Technology (SMT), ASNT, Oakland, CA.
15. Lloyd, G. M., Wang, M. L., Wang, X., and Chen, H., (2004) "Components of a Real-Time Monitoring System for a Segmental Pre-Cast Concrete Box Girder Bridge, " Proceedings, NDE Conference on Civil Engineering, ASNT, Buffalo, NY.
16. Lynch, J., and Loh, K., (2006) "A Summary Review of Wireless Sensors and Sensor Networks for Structural Health Monitoring, " Shock and Vibration Digest, 38(2), 91-128.
17. NPR (2011) "Transcript: Obama's State of the Union Address, " http://www.npr.org/2011/01/26/133224933/transcript-obamas-state-of-union-address, site accessed June 10, 2011.
18. Olund, J., Cardini, A. J., D'Attilio, P., Feldblum, E., and DeWolf, J., (2006) "Connecticut's Bridge Monitoring Systems, " NDE Conference on Civil Engineering, ASNT, St. Louis, MO.
19. st International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
20. Pontis 4.4. (2005) "Pontis Release 4.4: User's Manual, " Prepared for AASHTO by Cambridge Systematics, Inc., Cambridge, MA.
21. st International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
22. nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
23. Sazonov, E., Janoyan, K., and Jha, R. (2004) "Sensor Network Application Framework for Autonomous Structural Health Monitoring of Bridges, " Proceedings, NDE Conference on Civil Engineering, ASNT, Buffalo, NY.
24. nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
25. st International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
26. st International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
27. Timoshenko, S., and Gere, J., (1961) Theory of Elastic Stability, McGraw Hill, New York, NY.
28. US DHS, (2009), http://www.dhs.gov/xnews/gc_1179776352521.shtm, site accessed on March 20, 2009.
29. st International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
30. Weinmann, T., and Lewis, A. (2004) "Structural Testing and Health Monitoring for the Bridge Street Bridge Deployment Project, " Proceedings, NDE Conference on Civil Engineering, ASNT, Buffalo, NY.
31. nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
32. nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
33. nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
34. Agarwal, A., Kawaguchi, A., and Qian, G., (2008). "Bridge Element Deterioration Rates: Phase I, Report, " TIRC/NYSDOT Project # C-01-51, NYSDOT, Albany, NY.
35. Alampalli, S., (1998) "Effects of Testing, Analysis, Damage, and Environment on Modal Parameters. " Proceedings of Modal Analysis & Testing. NATO-Advanced Study Institute, Sesimbra, Portugal, pp. 427-443.
36. nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
37. ASCE., (2007) Seismic Rehabilitation of Existing Buildings, ASCE / SEI Standard No 41-06, American Society of Civil Engineers, Reston, VA.
38. Benjamin, J., and Cornell, A, (1970). Probability, Statistics, and Decision for Civil Engineers, McGraw-Hill, New York, NY.
39. Borden, K. A. (2008) "Natural hazards Mortality in the United States, " Ph.D. thesis, University of South Carolina, SC.
40. Cobb, R. G., (1996) "Structural damage identification from limited measurement data, " Ph. D. dissertation, School of Engineering, Airforce Institute of Technology, Wright Patterson AFB, OH.
41. DeLisle, R., Sullo, P., and Grivas, D., (2002) "A network-level pavement performance model that incorporate censored data, " TRP preprint Number 03-4281.
42. Dumova-Jovanoska, E., (2000) "Fragility curves for reinforced concrete structures in Skopje (Macedonia) region, " Soil Dynamics and Earthquake Engineering, Elsevier, 19, 455-466.
43. Eghbali, G.H. and Elsayed, E.A., (1997) "Reliability Estimation Based on Degradation Data, " Working Paper No. 97-117, Department of Industrial Engineering, Rutgers University, Piscataway, NJ.
44. Elsayed, E. A., (1996) Reliability Engineering, Addison-Wesley, Reading, MA.
45. Enright, M. P. and Frangopol, D. M., (1998) "Probabilistic Analysis of Resistance Degradation of Reinforced Concrete Bridge Beams Under Corrosion, " Engineering Structures, 20(11), 960-971.
46. Ettouney, M. and Alampalli, S., (2000) "Engineering Structural Health" Proceedings of the Structural Engineers World Congress, Philadelphia, PA.
47. Ettouney, M., and Alampalli, S., (2008) "Virtual Sensing in Structural Health Monitoring, " XXVI International Modal Analysis Conference (IMAC), Orlando, FL, February 2008.
48. Ettouney, M. and Alampalli, S., (2012) Infrastructure Health in Civil Engineering: Applications and Management, CRC Press, Boca Raton, FL.
49. Ettouney, M., Alampalli, S., and Agrawal, A., (2005) "Theory of multihazards for bridge structures, " Journal of Bridge Engineering, IOS Press, 1(3), 281-291, Amsterdam, Netherlands.
50. Ettouney, M. and Elsayed, E. A., (1999) "Reliability Estimation of Degraded Structural Components Subject to Corrosion, " Fifth ISSAT International Conference, Las Vegas, NV.
51. Ettouney M., Daddazio, R. and Hapij, A., (1998) "Health Monitoring of Complex Structures" SPIE Smart Structures and Materials Conference, San Diego, CA.
52. Ettouney, M., Daddazio, R., and Hapij, A., (1999) "Optimal sensor locations for structures with multiple loading conditions" SPIE Smart structures and Materials Conference, San Diego, CA.
53. nd International Workshop on Structural Health Monitoring, Stanford University, Stanford, CA.
54. FEMA-445., (2006) Next-Generation Performance-Based Seismic Design Guidelines, FEMA Report No 445, Washington, DC.
55. Ganji, V., Tabrizi, K. and Vittilo, N., (March 2000) "Project Level Application of Portable Seismic Pavement Analyzer, " Proceedings of the SMT/NDT Conference, NYS-DOT, NJ-DOT and FHA, Atlantic city, NJ.
56. Hamburg, M., (1977) Statistical Analysis for Decision Making, Harcourt Brace Jovanovich, Inc., New York, NY.
57. Helmicki, A., Hunt, V. J., and Lenett, M., (2002) "Non-Destructive Testing and Evaluation of the Ironton-Russell Bridge, " Proceedings of NDE Conference on Civil Engineering, ASNT, Cincinnati, OH.
58. Housner, G. and Masri, S., (1996) "Structural Control Issues Arising from the Northridge and Kobe Earthquakes, " 11th World Conference on Earthquake Engineering, Mexico, Paper No. 2009.
59. IBC., (2006) 2006 International Building Code, International Building Council, Washington, DC.
60. Melchers, R. E., (1987), Structural Reliability, Ellis Horwood Limited.
61. Melchers, R. E., (2002) Structural Reliability Analysis and Prediction, John Wiley and Sons, New York, NY.
62. Mostafa, E. and Grigoriu, M., (1999) "Fragility curves for non-structural systems, " Report No. 99-2, School of Civil and Environmental Engineering, Cornell University, Ithaca, NY.
63. Oswald, G. F. and Schuëller, G. I., (1983) "On the Reliability of Deteriorating Structures, " in Reliability Theory and Its Application in Structural and Soil Mechanics, Editors: Thoft-Christensen, P. and Nijhoff, M. The Hague, Netherlands.
64. Pugsley, A., (1962) Safety of Structures, Edward Arnold, London.
65. Reinhorn, A., Barron-Corvera, R., and Ayala, A., (2001) "Spectral Evaluation of Seismic Fragility of Structures, " in Structural Safety and Reliability (ICOSSAR 2001), Editors: Corotic et al., Swets & Zeitlinger, Balkema.
66. Reinhorn, A., Barron-Corvera, R., and Ayala, A., "Scour Monitoring Program Manual, " Hardesty & Hanover, prepared for New York State Department of Transportation, July 2006.
67. UBC-97., (1997) Uniform Building Code, International Conference of Building Officials, Whittier, CA.
68. Alampalli, S. and McCowan, P., (2008) "Addressing Critical Findings from Highway Bridge Inspection: New York State Procedures, " NDE/NDT for Highways and Bridges: Structural Materials Technology (SMT), ASNT, Oakland, CA.
69. Court of Inquiry, (1879), "Tay Bridge Disaster, " Report Of The Court of Inquiry, and Report Of Mr. Rothery, "Upon the Circumstances Attending the Fall of a Portion of the Tay Bridge on the 28th December 1879" place this as the second reference". The Railways Archive. Retrieved on 2007-02-05.
70. Ettouney, M., and Alampalli, S., (2012) Infrastructure Health in Civil Engineering: Applications and Management, CRC Press, Boca Raton, FL.
71. Ettouney, M., Smilowtz, R., Tang, M., and Hapij, A., (2006) "Global System Considerations for Progressive Collapse with Extensions to Other Natural and Man-Made Hazard, " Journal of Performance of Constructed Facilities, 20(1), 403-417.
72. FHWA., (2007) "National Bridge Inventory, NBI, " Federal Highway Administration, Washington, DC.
73. FEMA., (2009) Handbook for Rapid Visual Screening of Buildings to Evaluate Terrorism Risk, Federal Emergency Management Agency, FEMA Publication, Washington, DC.
74. FEMA., (2010) A How-To Guide to Mitigate Potential Terrorist Attacks, Federal Emergency Management Agency, FEMA Publication, Washington, DC.
75. Garg, N., Larkin, A., and Ricalde, L., (2008) "Evaluation of the Application Potential of PSPA in determination of Modulus of Concrete HMA pavements at the FAA's National Airport Pavement Test Facility, " NDE/NDT for Highways and Bridges: Structural Materials Technology (SMT), ASNT, Oakland, CA.
76. Hansen, W. and Surlaker, S., (2006) Embedded Wireless Temperature Monitoring Systems For Concrete Quality Control, University of Michigan, An Arbor, MI.
77. Ketchum, M., (2011c) "Tacoma Narrows" http://www.ketchum.org/wind.html [accessed February 20, 2011].
78. Kosnik, D. and Hopwood, T., (2008) "Monitoring of In-Situ Strains in Bearing Assembly Anchor Bolts on a Large Through-Truss Bridge, " NDE/NDT for Highways and Bridges: Structural Materials Technology (SMT), ASNT, Oakland, CA.
79. LeRose, C., (2001) The Collapse of the Silver Bridge, West Virginia Historical Society Quarterly Vol. XV, No. 4.
80. Lienhard, J., (2008) "Quebec Bridge Collapse, " http://www.uh.edu/engines/epi220.htm [accessed February 20, 2011].
81. National Transportation Safety Board (NTSB)., (1988) "Collapse of New York Thruway (1-90) Bridge over the Schoharie Creek, near Amsterdam, New York, April 5, 1987. " Highway Accident Report: NTSB/HAR-88/02, Washington, D.C.
82. Nationmaster. com (2011d) "Mianus River Bridge, " http://www.nationmaster.com/encyclopedia/Mianus-River-Bridge [accessed February 20, 2011].
83. Ni, Y., Xia, Y, Liao, W., and Ko, J., (2008) "Technology Innovation in Developing the Structural Health Monitoring System for Guangzhou New TV Tower, " International Symposium on Structural Control and Health Monitoring, Taichung, Taiwan.
84. NTSB., (1971) "Mianus River Bridge Collapse" http://www.ntsb.gov/Publictn/1971/HAR7101.htm, accessed on September 2, 2008. [accessed February 20, 2011].
85. NTSB., (1984) "Silver Bridge Collapse" report date 1984 accessed on 5-15-2008, http://www.ntsb.gov/publictn/1984/HAR8403.htm [accessed February 20, 2011].
86. NTSB., (2008) "Highway Accident Report, Collapse of I-35W Highway Bridge Minneapolis, Minnesota, August 1, 2007, " National Transportation Safety Board, Washington, D.C., NTSB/HAR-08/03, PB2008-916203, Notation 7975C.
87. NYSDOT., (2008) SFY 2006-07 Annual Report of Bridge Management and Inspection Programs, New York State Department of Transportation, Albany, NY.
88. Ricketts, B., (2008) "The Collapse of the Quebec City Bridge, " accessed from the web on 2008-02-05, http://www.mysteriesofcanada.com/Quebec/quebec_bridge_collapse.htm [accessed February 20, 2011].
89. Seim, C., (2008) "Why Bridge Have Failed Throughout History, " Civil Engineering Vol 78 (5): 64-71, 84-87, http://www.ASCE.org [accessed February 20, 2011].
90. Shepherd, R. and Frost, J. D., (1995) Failures in Civil Engineering: Structural, Foundation and Geoenvironmental Case Studies. American Society of Civil Engineers, New York.
91. Smith, C., (2008) "A Disaster in the Making, " accessed from the web on 2008-02-05, http://www.civeng.carleton.ca/ECL/reports/ECL270/Prelude.html [accessed February 20, 2011].
92. Thornton-Tomasetti, P. C., (1987) "Overview Report Investigation of the New York State Thruway Schoharie Creek Bridge Collapse. " Prepared for New York State Disaster Preparedness Commission, December.
93. Wardhana, K. and Hadipriono, F., (2003) "Analysis of Recent Bridge Failures in the United States, " ASCE J. of Performance of Constructed Facilities, Vol 17, No. 3.
94. Washington University., (2008a) Data sheet on the 1940 Tacoma Narrows Bridge, 1940, http://content.lib.washington.edu/cdm4/item_viewer.php?CISOROOT=/farquharson&CISOPTR=108&CISOBOX=1& REC=1
95. WJE, Associates, Inc., and Mueser Rutledge Consulting Engineers., (1987) "Collapse of Thruway Bridge at Schoharie Creek, " Final Report, Prepared for: New York State Thruway Authority, November.
96. Alampalli, S. and Ettouney, M., (April 2007) "Structural Identification, Damage Identification and Structural Health Monitoring, " Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2007, SPIE Volume 6531, San Diego, CA.
97. Annis, C., (2005) "How Many Specimens is Enough?" Proceedings of the 2005 ASNT Fall Conference, Columbus, OH.
98. Ettouney, M. and Alampalli, S., (2012), Infrastructure Health in Civil Engineering: Applications and Management, CRC Press, Boca Raton, FL.
99. Ettouney, M., Alampalli, S., and Agrawal, A., (2005) "Theory of Multihazards for Bridge Structures, " Bridge Structures, 1(3): 281-291.
100. Ettouney, M., Daddazio, R., and Abboud, N., (1997) "Some Practical Applications of the use of Scale Independent Elements for Dynamic Analysis of Vibrating Systems, " Computers and Structures, 65(3): 423-432.
101. Gray, I. and Gray, J., (2005) "Assessing UT, EC, and RT Image Processing and Information Fusion with NDE Computer Simulation, " Proceedings of the 2005 ASNT Fall Conference, Columbus, OH.
102. Hyland, D. and Fry, G., (2000) "A Neural-Genetic Hybrid Approach for Optimizing Structural Health Monitoring Systems, " Proceedings of 2nd International Workshop on Structural Health Monitoring, Stanford University, Stanford, CA.
103. Maser, K., (2008) "Integration of Ground Penetrating Radar and Infrared Thermography for Bridge Deck Condition Evaluation, " NDE/NDT for Highwaya and Bridges: Structural Materials Technology (SMT), ASNT, Oakland, CA.
104. Shenton, H., Chajes, M., Finch, W., and Sivakumar, B., (2002) "Long-Term Monitoring of the Newburgh-Beacon Bridge, " Proceedings, Structural Materials Technology V: An NDT Conference, NYSDOT, FHWA and ASNT, Cincinnati, OH.
105. Timoshenko, S., (1955) Vibration Problems in Engineering, Van Nostrand Reinhold Company, New York, NY.
106. AISC., (1995) Load and Resistance Factor Design, American Institute of Steel Construction, Chicago, IL.
107. AISC., (1989) Manual of Steel Construction, Allowable Stresses, American Institute of Steel Construction, Chicago, IL.
108. American Society of Testing and Materials, ASTM., (1987). Standard Test Method for Half-Cell Potentials of uncoated Reinforcing Steel in Concrete. ASTM C876.
109. st International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
110. Arms, S. W., Galbreath, J. H., Newhards, A.T., and Townsend, C.P., (2004) "Remotely Reprogrammable Sensors for Structural Health Monitoring, " Proceedings, NDE Conference on Civil Engineering, ASNT, Buffalo, NY.
111. nd Edition, American Society of Non-Destructive Testing, Columbus, OH.
112. Bastianinin, F., Matta, F., Rizzo, A., Galati, N., and Nanni, A., (2006) "Overview of Recent Bridge Monitoring Applications using Distributed Brillouin Fiber Optic Sensors, " NDE Conference on Civil Engineering, ASNT, St. Louis, MO.
113. st International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
114. nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
115. Berriman, J., Gan, T. H., Hutchins, D. A., and Purnell, P., (2003) "Non-Contact Ultrasonic Interrogation of Concrete, " Non-Destructive Testing in Civil Engineering International Symposium, Berlin, Germany.
116. Cai, S., Hou, S., and Ou, J., (2008) "Settlement and Erosion Monitoring Using FBG Sensors for Soil Under Bridge Approach Slab, " NDE/NDT for Highwaya and Bridges: Structural Materials Technology (SMT), ASNT, Oakland, CA.
117. Chen, G., (2004) "Novel Cable Sensor for Crack Detection of RC Structures, " Proceedings, NDE Conference on Civil Engineering, ASNT, Buffalo, NY.
118. Chen, S-E., Callahan, D., Jones, S., Zheng, L., Biswas, P., Eldina, P., El Yamak, B., Malpekar, A. D., and Lokanath, R., (2004) "Design of a Remote monitoring Techniques of Bridge Integrity Using Wireless Drive-by Network, " Proceedings, NDE Conference on Civil Engineering, ASNT, Buffalo, NY.
119. Cho, S-B. and Lee, J-J., (2004) "Strain Event Detection Using a Double-Pulse Technique of a Brillouin Scattering-Based Distributed Optical Fiber Sensor, " Optics Express, 12(18), 4339-4346.
120. Chuang, J., Brown, B., Rivera, E., and Fletcher, D., (2004) "Design and Implementation of an Integrated Fiber Bragg Grating Interrogation System Using Distributed Computing Architecture, " Proceedings of 2nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
121. Cobb, R. G., (1996) "Structural damage identification from limited measurement data, " Ph. D. dissertation, School of Engineering, Air Force Institute of Technology, Wright Patterson AFB, OH.
122. Corrosionsource (2011) "Corrosion Sensors, " http://www.corrosionsource.com/technicallibrary/corrdoctors/Modules/MonitorBasics/Types.htm. Site accessed February 23, 2011.
123. nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
124. Engineersedge (2011). "LVDT Sensors, " http://www.engineersedge.com/instrumentation/lvdt_linear_voltage_displacment_tranducer.htm. Site accessed February 23, 2011.
125. Ettouney, M. and Alampalli, S., (2000) "Engineering Structural Health, " Proceedings, Structural Engineers World Congress, Philadelphia, PA.
126. Ettouney, M. and Alampalli, S., (2012) Infrastructure Health in Civil Engineering, Applications and Management, CRC Press, Boca Raton, FL.
127. Ettouney, M., Daddazio, R., and Hapij, A., (1999) "Optimal Sensor Locations for Structures with Multiple Loading Conditions, " Proceedings, International Society of Optical Engineering Conference on Smart Structures and Materials, San Diego, CA.
128. Evans, K. F., Walter, S. J., Heymsfield, A. J., and Deeter, M. N., (1998) "Modeling of Submillimeter Passive Remote Sensing of Cirrus Clouds, " Journal of Applied Meteorology, 37(2), 184-205.
129. Fuchs, P. and Jalianoos, F., (2008) "Thermal Stress Measurements on Structural Defects, " NDE/NDT for Highwaya and Bridges: Structural Materials Technology (SMT), ASNT, Oakland, CA.
130. Gage-Technique (2011) "Demountable Strain Gauges" http://www.gage-technique.demon.co.uk/pdf/gti-straingaugetheory.pdf. Site accessed February 23, 2011.
131. Gangone, M. V., Whelan, M. J., Fuchs, M. P., Janoyan, K., D., and Minnetyan, L., (2006) "Implementation and deployment of a structural health monitoring (SHM) system for bridge superstructures" Presented at Transportation Research Board, TRB, Washington, DC.
132. Gucunski, N., Rascoe, C., Parrillo, R., and Roberts, R,(2008) "Comparative Study of Bridge Deck Condition Assessment by High Frequency GPR, " NDE/NDT for Highways and Bridges: Structural Materials Technology (SMT), ASNT, Oakland, CA.
133. Hag-Elsafi, O., Kunin, J., and Alampalli, S., (2003) "In-Service Evaluation of a Concrete Bridge FRP Strengthening System, " Report 139, Transportation Research and Development Bureau, New York State Department of Transportation, Albany, NY.
134. Hannah, R. L. and Reed, S. E., (1991) "Strain Gage User's Gandbook. " Society for Experimental Mechanics, Bethel, CT.
135. Hay, T., Jayaraman, S., Ledeczi, A., Volgyesi, P., and Sammane, G., (2008) "Wireless Technology for Steel Bridges, " NDE/NDT for Highways and Bridges: Structural Materials Technology (SMT), ASNT, Oakland, CA.
136. Hecht, J., (2006) Understanding Fiber Optics, Prentice Hall, New Jersey, NJ.
137. Housner, G. and Masri, S. (1996) "Structural Control Issues Arising from the Northridge and Kobe Earthquakes, " Proceedings of 11th World Conference on Earthquake Engineering, Mexico, Paper No. 2009.
138. Huston, D., (2002) "Electromagnetic Interrogation of Highway Structures, " Proceedings, NDE Conference on Civil Engineering, ASNT, Cincinnati, OH.
139. Huston, D., (2010) Structural Sensing, Health Monitoring and Performance Evaluation, CRC Press, Boca Raton, FL.
140. ISIS Canada., (2006), Civionics Specifications, ISIS Canada Corporation, Manitoba, Canada.
141. Kao, T. and Taylor, H., (1996) "High-sensitivity intrinsic fiber-optic Fabry-Perot pressure sensor, " Optics Letters, 21(8), 615-617.
142. Kenderian, S., Djordjevic, B., Cermiglia, D., and Garcia, G., (2006) "Dynamic Railroad Inspection Using the Laser-Air Hybrid Ultrasonic Technique, " NDT in Rail Industry, Insight, 48(6).
143. Kohler, B., (2006) "Dispersion Relations in Plate Structures Studied with a Scanning Laser Vibrometer, " ECNDT 2006, We.2.7.1, pp 1-11.
144. Kommareddy, V., Peters, J., and Hsu, D., (2004) "Air-Coupled Ultrasonic Measurements in Composites, " Proceedings, SPIE 3rd International Conference on Experimental Mechanics, Singapore.
145. Lynch, J. P., Kamat, K., Li, V. C., Flynn, M. P., Sylvester, D., Najafi, K., Gordon, T., Lepech, M., Emami-Naeini, A., Krimotat, A., Ettouney, M., Alampalli, S., and Ozdemir, T., (2009) "Overview of a Cyber-enabled Wireless Monitoring System for the Protection and Management of Critical Infrastructure Systems, " SPIE Smart Structures and Materials, San Diego, CA.
146. Lynch, J. and Loh, K., (2006) "A Summary Review of Wireless Sensors and Sensor Networks for Structural Health Monitoring, " Shock and Vibration Digest, 38(2), 91-128.
147. Lynch, J. P., Wang, W., Loh, K. J., Yi, J-H., and Yun, C-B., (2006) "Performance Monitoring of the Geumdang Bridge using a dense network of high-resolution wireless sensors" Smart Materials and Structures, Institute of Physics Publishing, 15, 1561-1575.
148. Macrosensors (2011), "LVDT Sensors" http://www.macrosensors.com/lvdt_macro_sensors/lvdt_applications/temperature_effects.html. Site accessed February 23, 2011.
149. McCormac, J. C. (1992) Structural Steel Design: ASD Method, Harper Collins Publishers, New York.
150. McCormac, J. C. (1995) Structural Steel Design: LRFD Method, Harper Collins Publishers, New York.
151. McNiel, D. and Card, L., (2004) "Novel Event Localization for SHM Data Analysis, " Proceedings of 2nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, " ISIS Canada Corporation, Manitoba, Canada.
152. Mercado, E. J. and Rao, J. R., (2006) "The Pneumatic Scour Detection System, " NDE Conference on Civil Engineering, ASNT, St. Louis, MO.
153. Metje, N., Chapman, D. N., Rogers, C. D. F., Kukureka, S. N., Miao, P., and Henderson, P. J., (2004) "Structural Monitoring using Optical Fibre Technology, " Proceedings, NDE Conference on Civil Engineering, ASNT, Buffalo, NY.
154. Nelson, R. B., (1976) "Simplified Calculations of Eigenvector Derivatives, " AIAA Journal, 14(9), 1201-1205.
155. Neubauer, S., Hemphill, D., Phares, B., Wipf, T., Doornik, J., Greimann, L., and Monk, C., (2004) "Use of Fiber Bragg Gratings for the Long Term Monitoring of a High Performance Steel Bridge, " Proceedings, NDE Conference on Civil Engineering, ASNT, Buffalo, NY.
156. Newton, R., (1999), "Construction of a Chemical Sensor/Instrumentation Package Using Fiber Optic and Miniaturization Technology, " NASA Report Number TM-1999-209732, Marshall Space Flight Center, Alabama.
157. Northrop, R. B., (2005) Introduction to Instrumentation and Measurements, Taylor and Francis, New York.
158. Norton, H. N., (1989) Handbook of Transducers, Prentice Hall, Englewood Cliffs, NJ.
159. Ojio, T., Saito, Y, Yamada, K, and Shiina, S., (2004) "Development of 'Strain Probe' By Frictional Type Strain Gauge, " Proceedings of 2nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, " ISIS Canada Corporation, Manitoba, Canada.
160. nd International Workshop on Structural Health Monitoring, Stanford University, Stanford, CA.
161. Omega (2011) "OMEGA Engineering Technical, " http://www.omega.com/prodinfo/loadcells.html. Site accessed February 23, 2011.
162. OZOptics., (2006) "Fiber Optic Distributed Brillouin Sensor Applications, " www.ozoptics.com. Site accessed February 27, 2011, ON, Canada.
163. Papadimitriou, C., Beck, J., and Au, S. (2000) Entropy-Based Optimal Sensor Location for Structural Model Updating, J. Vib. Control, 6(5), 781-800.
164. Park, H., Jung, H., and Baek, J., (2004) "Safety Monitoring Technique for Steel Beams Using Long-Gauge Fiber Optic Sensors, " Proceedings of 2nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, " ISIS Canada Corporation, Manitoba, Canada.
165. PCB (2011) "PCB Piezotronics Tech Support Documents, " http://www.pcb.com/techsupport/tech_indaccel.php. Site accessed February 23, 2011.
166. nd Edition.
167. Pendat, J. and Piersol, A. (2010) Random Data: Analysis and Measurement Procedures, Wiley, New York.
168. Ravindran, A., Phillips, D., and Solberg, J., (1987) Operations Research-Principles and Practice, John Wiley & Sons, New York.
169. Rivera, E., Mufti, A., and Thomson, D., (2004) "CIVIONICS Specifications for Fibre Optic Sensors for Structural Health Monitoring, " Proceedings of 2nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, " ISIS Canada Corporation, Manitoba, Canada.
170. Rong, A. Y. and Cuffari, M. A., (2004) "Structural Health Monitoring of a Steel Bridge using Wireless Strain Gages, " Proceedings, NDE Conference on Civil Engineering, ASNT, Buffalo, NY.
171. Sanyal, D., (2007) "Laser Induced Ultrasonic Characterization of FRP Composites, " Proceedings, International Conference on Advanced Materials and Composites, ICAMC.
172. Satou, T., Kaneda, Y, Nagaoka, S., and Ogawa, S. (2006) "Development of Wireless Sensors Using RFID Techniques for Concrete Structures, " NDE Conference on Civil Engineering, ASNT, St. Louis, MO.
173. Scalea, L., Rizzo, P., Coccia, S., Bartoli, I., Fateh, M., Viola, E., and Pascale, G., (2005) "Non-Contact Ultrasonic Inspection of Rails and Signal Processing for Automatic Detection and Classification, " NDT in Rail Industry, Insight, 47(6), 346-353.
174. Sensorland (2011), "LVDT Sensors, " http://www.sensorland.com/HowPage006.html. Site accessed February 23, 2011.
175. Shah, P. and Udwadia, F. E., (1977) "A methodology for optimal sensor locations for identification of dynamic systems, " Journal of Applied Mechanics, 45(2).
176. Shenton, H. W., Jones, R., and Howell, D. A., (2004) "A Web-Based System for Measuring Live Load Strain in Bridges, " Proceedings, NDE Conference on Civil Engineering, ASNT, Buffalo, NY.
177. Siddiolo, A. and Maev, R., (2006) "An Air-Coupled Ultrasonic Techniques for NDE of Ancient Paintings, " ECNDT 2006, Th.2.4.4.
178. Singer (2011), "LVDT Sensors, " http://www.singer-instruments.com/tutorials/lvdt/lvdt_tut.html. Site accessed February 23, 2011.
179. Solodov, I. and Busse, G., (2006a) "Mapping of Elastic Anisotropy with Air-Coupled Phonon-Focusing of Guided and Surface Waves, " ECNDT2006, We.2.7.1.
180. Solodov, I. and Busse, G., (2006b) "New Advances in Air-Coupled Ultrasonic NDT Using Acoustic Mode Conversion, " ECNDT 2006, We.2.4.2.
181. Telscho, K. and Larsen III, J., (2003) "Determination of Lateral Mode Dispersion from Full-Field Imaging of Film Bulk Acoustic Resonator Motioh, " 2003 IEEE Ultrasonics Symposium.
182. st International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, " ISIS Canada Corporation, Manitoba, Canada.
183. nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
184. Texier, S. and Pamukcu, S., (2003) "Fiber Optic Sensor for Distributed Liquid Content Quantification in Subsurface, " International Symposium on Field Measurements in GeoMechanics, NGI, Oslo, Norway.
185. st International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
186. Timoshenko, S., (1955) Vibration Problems in Engineering, McGraw-Hill, NY.
187. Udwadia, F. E., (1994) "Optimal Sensor Locations for Structural Identification, " Journal of Engineering Mechanics, 110(2), 1757-1770.
188. Washer, G., Bolleni, N., Fenwick, R., and Alampalli, S., (2008) "Environmental Factors for the Thermographic Inspection of Highway Bridges, " NDE/NDT for Highways and Bridges: Structural Materials Technology (SMT), ASNT, Oakland, CA.
189. Weber, B., Paultre, P., and Proulx, J., (2004) "Damage Detection in a Two-Story Concrete Building: Minimizing the Effect of Measurement Errors, " Proceedings of 2nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
190. Webester, J. G., (1999) The Measurement, Instrumentation and Sensors Handbook, CRC Press, Boca Raton, FL.
191. st International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
192. Yamaura, T, Inoue, Y, Kino, H., and Nagai, K., (2000) "Development of Structural Health Monitoring System Using Brillouin Optical Time Domain Reflectometer, " Proceedings of 2nd International Workshop on Structural Health Monitoring, Stanford University, Stanford, CA.
193. st International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
194. Zoëga, A. and Wiggenhauser. H., (2008) "Propagation Time of Elastic Surface Waves on Concrete Specimens under Uniaxial Loads, " NDE/NDT for Highways and Bridges: Structural Materials Technology (SMT), ASNT, Oakland, CA.
195. nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
196. Alampalli, S., (1998a) Effects of Testing, Analysis, Damage, and Environment on Modal Parameters. Proc. Modal Analysis & Testing. NATO-Advanced Study Institute, Sesimbra, Portugal.
197. Alampalli, S., (1998b) "Remote Bridge-Monitoring Systems: New York's Experience. " Structural Materials technology: An NDT Conference, San Antonio, TX, SPIE Volume 3400.
198. Alampalli, S. and Cioara, T., (2000) "Selective Random Decrement Techniques for Bridge Vibration Data, " Structural Materials Technology: An NDT Conference, Atlantic City, NJ.
199. Alampalli, S. and Ettouney, M. (Eds.), (2003) Proceedings of the Workshop on Engineering Structural Health. New York State Department of Transportation, New York.
200. Alampalli, S. and Fu, G., (1994) "Remote bridge monitoring systems for bridge condition. " Clinet Report 70, Engineering Research and Development Bureau, NYS Department of Transportation, Albany, NY.
201. Algernon, D. and Wiggenhauser, H., (2006) "Impact-Echo Signal Processing, " NDE Conference on Civil Engineering, ASNT, St. Louis, MO.
202. Andry, A. N., Shapiro, E. Y., and Chung, J. C., (1983) "Eigenstructure Assignment for Linear Systems, " IEEE Transactions on Aerospace und Electronic Systems, Vol. AES-19, No. 5.
203. Aref, A. and Alampalli, S., (2001) "Vibration Characteristics of a Fiber Reinforced Polymer Bridge Superstructure. " Journal of Composite Structures, Elsevier Science, 52(3-4).
204. Asmussen, J.C., (1997) "Modal analysis based on the random decrement technique. application to civil engineering structures. " Ph.D. Thesis, Aalborg University, Department of Building Technology and Structural Engineering, Denmark.
205. Asmussen, J.C., Brincker, R., and Ibrahim, S.R., (1999) Modal Analysis based on the Random Decrement Transform. Proc. Modal Analysis & Testing, NATO-Advanced Study Institute, Sesimbra Portugal.
206. nd International Workshop on Structural Health Monitoring, Stanford University, Stanford, CA.
207. Bernhard, R. and Huff, J., (1999) "Structural-acoustic design at high frequency using the energy finite element method", Journal of Vibration and Acoustics, Vol 221, Academic Press.
208. th International Modal Analysis Confrence & Exposition, Kissimmee, FL.
209. nd International Workshop on Structural Health Monitoring, Stanford University, Stanford, CA.
210. Brinker, R. and Moller, N., (2006) "Operational Modal Analysis-a New Technique to Explore, " Sound and Vibration, Volume 40, No 6, pp. 5-6.
211. Cheung, M. S. and Naumoski, N., (2002) "The First Smart Long-Span Bridge in Canada-Health Monitoring of the Confederation Bridge.' Structural Health Monitoring Workshop, ISIS Canada Research Network, Manitoba, Canada.
212. Cho, P., (1993) "Energy flow analysis of coupled structures, " Ph.D. Dissertation, Mechanical Engineering Department, Purdue University.
213. Chong, K. P., Carino, N. J., and Washer, G. A., (2001) "Health Monitoring of Civil Infrastructures. " Proceedings of the SPIE Health Monitoring and Management of Civil Infrastructure Systems, Plenary Paper, Newport Beach, CA.
214. Cioara, T. Gh., (1988) "On a Curve-Fitting Algorithm for Modal Parameter Estimation. " Sixth International Modal Analysis Conference, Kissimmee, FL.
215. Cioara, T. Gh., (1999) Vibration Monitoring of Mechanical System-Fault Diagnosis and Vibration Level Reduction. USC-ME-LAMSS-99-101, University of South Carolina.
216. Cole, H., (1973) On-Line Failure Detection and Damping Measurement of Aerospace Structures by Random Decrement. NASA CR-2205, Washington, DC.
217. Dasgupta, G., (1982) "A finite element formulation for unbounded homogeneous continua, " Trans. ASME Journal of Applied Mechanics, 49, 136-140.
218. Demuth, H., Beale, M., and Hogan, M., (2007) Neural Network Toolbox 5: User's Guide, The Mathworks, Inc., Natic, MA.
219. Doebling, S., (1996) "Minimum-rank optimal update of elemental stiffness parameters for structural damage identification, " AIAA Journal. 34(12), 949-957.
220. Doebling, S., Farrar, C., Prime, M., and Shevitz, D., (1996) "Damage Identification and Health Monitoring of Structural and Mechanical Systems from Changes in Their Vibration Characteristics: A Literature Review, " Los Alamos National Laboratory Report, LA-13070-MS, Los Alamos, NM.
221. Ettouney, M., (1978) "Compliance Function of Footing in Two Layered Medium, " ASCE Geotechnical Engineering Division Specialty Conference, Pasadena, CA.
222. Ettouney, M., (1979) "Empirical Expressions for Frequency Dependent Soil Springs for Machine Foundation Design, " Proceedings, the 1979 Annual Convention, American Concrete Institute, Milwaukee, Wisconsin.
223. Ettouney, M. and Alampalli, S., (2012) Infrastructure Health in Civil Engineering, Applications and Management, CRC Press, Boca Raton, FL.
224. Ettouney, M., Benaroya, H., and Wright, J., (1990) "Wave propagation in hyper-structures, " in Space 90: Engineering, Construction and Operations in Space, Editors: Johnson, S. J. and Wetzel, J. P. ASCE, New York.
225. Ettouney, M. and Daddazio, J., (1978) "Hydrodynamic Interaction Between the Walls and the Floor of Cylindrical Fluid Containers, " Proceedings, Conference or Structural Analysis, Design and Construction in Nuclear Power Plants, Port Allegre, Brazil.
226. Ettouney, M., Daddazio, R., and Abboud, N., (1995a) "Scale Independent Elements for Dynamic Analysis of Vibrarting Systems, " Proceedings Third International Conference on Mathematical and Numerical Aspects of Wave Propagation Phenomena, Mandelieu-La Napoule, France.
227. Ettouney, M., Daddazio, R., and Abboud, N., (1995b) "Some Practical Applications Of the Use of Scale Independent Elements For Dynamic Analysis of Vibrating Systems, " Computers and Structures, Vol 65, No. 3, Pergamon Press.
228. Ettouney, M., Daddazio, R., and DiMaggio, F., (1990) "Wet Modes of Submerged Structures, " Technical report prepared for David Taylor Research Center, Bethesda, MD. Contract No. N00167-86-c-0100, Weidlinger Assoc., Report No. WA 9008, NY.
229. Farrar, C. R. and Doebling, S. W., (1998) Damage Detection-Field Application to a Large Structure. Proc. Modal Analysis & Testing, NATO-Advanced Study Institute, Sesimbra, Portugal.
230. FHWA., (1995) "Recording and Coding Guide for the Structure Inventory and Appraisal of the Nation's Bridges, " Report No. FHWA-PD-96-001, Office of Engineering, Bridge Division, Washington, DC.
231. FHWA., (2004) National Bridge Inspection Standards (NBIS), Federal Regulations 69 FR74436, Federal Highway Administration, USA.
232. Friswell, M. and Mottershead, J., (1995) Finite Element Model Updating in Structural Dynamics, Kluwer Academic Publishers, Norwell, MA.
233. Fuchs, P. A., Washer, G. A., Chase, S. B., and Moore, M., (2004) "Applications of Laser Based Instrumentation for Highway Bridges. " Journal of Bridge Engineering, ASCE, 9(6), 541-549.
234. Girard, A. and Defosse, H., (1990) "Frequency smoothing, matrix assembly and structural paths: a new approach for structural dynamics up to high frequencies, " Journal of Sound and Vibration, 137(1), 53-68.
235. Hag-Elsafi, O., Kunin, J., and Alampalli, S., (2004) "Monitoring of Court Street Bridge for Deck Load Stresses, " Proceedings, NDE Conference on Civil Engineering, ASNT, Buffalo, NY.
236. Harik, I., Zatar, W., Herd, D., Goodpaster, S., Hu, J., Givan, G., and Crane, R., (2002) "NDE / NDT of Bridges in Kentucky, " Proceedings, NDE Conference on Civil Engineering, ASNT, Cincinnati, OH.
237. th IMAC, Santa Barbara, CA.
238. He, J. and Fu, Z., (2001) Modal Analysis, Butterworth Heinemann, Boston.
239. Hemez, F. M., (1993) "Theoretical and Experimental Correlation between Finite Element Models and Modal Tests in the Context of Large Flexible Space Structures, " Ph.D. Dissertation, University of Colorado, Department of Aerospace Engineering Sciences.
240. Hemez, F. and Doebling, S., (2001), "Review and Assessment of Model Updating for Non-Linear, Transient Dynamics, " Mechanical Systems and Signal Processing, Vol 15, No. 1, Academic Press.
241. nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
242. Ibrahim, S. R., (1977) Random Decrement Techniques for Modal Identification of Structures. Journal of Spacecraft and Rockets, 14(11), 696-700.
243. Ibrahim, S., (1998) "Fundamentals of Time Domain Modal Identification, " in Modal Analysis and Testing, Editors: Silva, J., and Maya, M. Nato Science Series, Kulwer Academic Publishers, The Netherlands.
244. Jeng, D., Bateni, S., and Lockett, E., (2005) "Neural Network assessment for scour depth around bridge piers, " University of Sydney, Department of Civil Engineering Research Report No. R855, Sydney, Australia.
245. Kangas, S., Helmicki, A., Hunt, V., Shahrooz, B., Brown, D., and Lenett, M., (2002) "Modal Test-Based Condition Assessment, " Proceedings, NDE Conference on Civil Engineering, ASNT, Cincinnati, OH.
246. Katkhuda, H., Flores, R., and Haldar, A., (2005) Health Assessment at local Level with Unknown Input Excitation. Journal of Structural Engineering, ASCE, 131(6), 956-965.
247. Kausel, E., (1974) "Forced vibrations of circular foundations on layered media, " Research Report R74-11, Soils Publication No. 336, Structures Publication No. 384, Massachusetts Institute of Technology, Cambridge, MA.
248. Kausel, E. and Roesset, J. M., (1977) "Semi analytic hyper element for layered strata, " Journal of the Engineering Mechanical Division, ASCE, 103(EM4), 569-588.
249. Keane, A. and Price, W., (1969) Statistical Energy Analysis, Cambridge University Press.
250. nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
251. Koizumi, T., Tsujiuchi, N., Tanaka, H., Okubo, M., and Shinomiya, M., (2002) "Prediction of the Vibration In Buildings Using Statistical Energy Analysis, " Proceedings of the 20th International Modal Analysis Conference (IMAC), Los Angeles, California.
252. Laurens, S., Shartai, Z. M., Kacimi, S., Balayssac, J. P., and Arliguie, G., (2006) "Prediction of Concrete Electrical Resistivity using Artificial Neural Networks, " NDE Conference on Civil Engineering, ASNT, St. Louis, MO.
253. Leung, A. Y. T., 1(988) "A simple dynamic substructure method, " Earthquake Engineering and Structural Dynamics, 16, 827-837.
254. Lim, T. W., (1995) "Structural Damage Detection Using Constrained Eigenstructure Assignment, " Journal of Guidance, Control and Dynamics, 18(3), 411-418.
255. Lim, T. W. and Kashangaki, T., (1994) "Structural Damage Detection of Space Truss Structures Using Best Achievable Eigenvectors, " AIAA Journal, 32(5), 2310-2317.
256. López-Díez, J., Torrealba, M., Güemes, A., and Cuerno, C., (2005) "Application of Statistical Energy Analysis for Damage Detection in Spacecraft Structures, " Engineering Materials, Vol 293-294, Trans Tech Publications, Switzerland.
257. Lyon, R., (1975) Statistical Energy Analysis of Dynamical Systems, M.I.T. Press, Cambridge, MA.
258. Lyon, R. and Maidanik, R., (1962) "Power Flow between Linearly Coupled Oscillators, " Journal of the Acoustical Society of America, 34, 623-639.
259. Lysmer, J. (1970) "Lumped Mass Method for Rayleigh Waves, " Bulletin of the Seismological Society of America, 60, 89-104.
260. Mondal, P. and DeWolf, J. T., (2004) "Long-Term Monitoring of Temperatures in a Segmental Concrete Box-Girder Bridge in Connecticut, " Proceedings, NDE Conference on Civil Engineering, ASNT, Buffalo, NY.
261. Moore, M., Phares, B., Graybeal, B., Rolander, D., and Washer, G., (2001) Reliability of Visual Inspection for Highway Bridges, Volume I: Final Report. Report No. FHWA-RD-01-020. Federal Highway Administration, Washington, DC.
262. Moore, M., Phares, B., and Washer, G., (2004) Guidelines for Ultrasonic Inspection of Hanger Pins. Federal Highway Administration, Report No. FHWA-HRT-04-042, Washington, DC.
263. Niederleithinger, E. and Taffe, A., (2006) "Improvement and Validation of Foundation NDT Methods, " NDE Conference on Civil Engineering, ASNT, St. Louis, MO.
264. Olson, L., (2002) "Determination of Unknown Depths of Bridge Foundations for Scour Safety Investigation, " Proceedings, NDE Conference on Civil Engineering, ASNT, Cincinnati, OH.
265. Padur, D. S., Wang, X., Turer, A., Swanson, J., Helmicki, A., and Hunt, V., (2002) "Non-Destructive Evaluation/Testing Methods-3D Finite Element Modeling of Bridges, " Proceedings, NDE Conference on Civil Engineering, ASNT, Cincinnati, OH.
266. nd International Workshop on Structural Health Monitoring, Stanford University, Stanford, CA.
267. Phares, B., Graybeal, B., Rolander, D., Moore, M., and Washer, G., (2001) Reliability and Accuracy of Routine Inspection of Highway Bridges. Transportation Research Record, Journal of Transportation Research Board, National Research Council, Issue Number 1749, 82-92.
268. Phares, B., Washer, G., Rolander, D., Graybeal, B., and Moore, M., (2004) Routine Highway bridge Inspection Condition Documentation Accuracy and Reliability. Journal of Bridge Engineering, ASCE, 9(4), 403-413.
269. Rose, J., (2004) Ultrasonic Waves in Solid Media, Cambridge University Press, Cambridge, UK.
270. Sanayei, M., Imbaro, G., McClain, J., and Linfield, B., (1997) "Structural Model Updating Using Experimental Static Measurments, " Journal of Structural Engineering, ASCE, 123(6), 792-798.
271. Sanayei, M. and Saletnik, M. J., (1996a) "Parameter Estimation of Structures From Static Strain Measurements, Part I: Formulation, " Journal of Structural Engineering, ASCE, 122(5), 555-562.
272. Sanayei, M. and Saletnik, M. J., (1996b) "Parameter Estimation of Structures From Static Strain Measurements, Part II: Error Sensitivity Analysis, " Journal of Structural Engineering, 122(5), 563-572.
273. Sanayei, M. and Santini, E., (1998) "Dynamic Bridge Substructure Evaluation and Monitoring System, " Report of subcontract to Tufts University from FHWA grant to Olson Engineering.
274. th International Congress on Sound and Vibration, Stockholm, Sweden.
275. th Congrès Francais d'Acoustique (CFA).
276. th International Modal Analysis Confrence & Exposition, Kissimmee, FL.
277. Siswobusono, P., Chen, S., Zheng, L., Yamak, B., Jones, S. L., and Callehan, D., (2004) Dynamic Load Rating of Rural Bridges. International Modal Analysis Conference XXII, Michigan, MI.
278. th International Modal Analysis Conference & Exposition, Kissimmee, FL.
279. The Steel Company of Canada Limited., (1966) Hollow Structural Sections, Hamilton, Ontario, ON.
280. Timoshenko, S., (1955) Vibration Problems in Engineering, Van Nostrand Reinhold Company, New York.
281. Timoshenko, S., Young. D. H., and Weaver, W. Jr., (1974) Vibration Problems in Engineering, 4th Edition, John Wiley & Sons, New York, Chapter 5.
282. Tolbert, R., Zheng, L., and Chen, S., (2004) Modal Testing of a Unique Cantilevered Structure above the Smith Lake. International Modal Analysis Conference XXII, Michigan, MI.
283. Trippi, R. and Turban, E., (1992) Neural Networks in Finance and Investing, Probus Publishing Company, Chicago, IL.
284. Vlahopoulos, N., Zhao, X., and Allen, T., (1999) "An Approach For Evaluating Power Transfer Coefficients For Spot-Welded Joints In An Energy Finite Element Formulation", Journal of Sound and Vibration, Vol. 220, No. 1, 1999, pp. 135-154.
285. Waas, G., (1972) "Linear Two-dimensional Analysis of Soil Dynamics Problems in Semi-infinite Layered Media, " Ph. D. Thesis, University of California at Berkeley, CA.
286. Washer, G. A., (2002) "Developments in NDE for Highway Bridges in United States. " Eight European Conference on Nondestructive Testing, European Society of Nondestructive Testing, Barcelona, Spain.
287. Yang, Q. and Liu, J., (2007) "Structural Damage Identification Based on Residual Force Vector, " Journal of Sound and Vibrations, 305(1-2), 298-307.
288. Zhao, X. and Vlahopoulos, N., (2004) "A basic hybrid finite element formulation for mid-frequency analysis of beams connected at an arbitrary angle, " Journal of Sound and Vibration, Vol 269, No 6, pp. 135-164.
289. Zienkiewicz, O. C., (1971) The Finite Element Method in Engineering Science, McGraw-Hill, New York.
290. Zimmerman, D. and Kaouk, M., (1994) "Structural damage detection using a minimum rank update theory, " Journal of Vibration and Acoustics, 116(2), 222-230.
291. rd Middle East Nondestructive Testing Conference & Exhibit, Manama, Bahrain.
292. nd Edition, Vol. 9, Special Nondestructive Testing Methods. ASNT, Columbus, OH.
293. ASNT. (1999). Choosing NDT: Applications, Costs, and Benefits of Nondestructive Testing in Your Quality Assurance Program, American Society for Nondestructive Testing, Inc., Columbus, OH.
294. Baron, J. and Ying, S. (1987). "Acoustic Emission Source Location, " in Nondestructive Testing Handbook: Vol. 5, Acoustic Emission Testing, ASNT, Columbus, OH.
295. Beissner, R. (2005). "Magnetic Field Testing, " in ASM Handbook: Non Destructive Evaluation and Quality Control, Vol. 17, ASM, Materials Park, OH
296. Beissner, R. and McGinnis, C. (1984). "Laboratory Test of Magnetic Field Disturbance (MFD) System for Detection of Flaws in Reinforcing Steel, " Report No. DTFH 61-80-C-00002, FHWA, Washington, DC.
297. Bendat, J. and Piersol, A. (1971). Random Data: Analysis and Measurement Procedures, Wiley-Interscience, New York.
298. Birks, A., Golis, M., and Green, R. (2007). "Introduction to Ultrasonic Testing, " in Nondestructive Testing Handbook: Vol. 10, ANST, Columbus, OH.
299. Boashash, B. (1992). Time-Frequency Signal Analysis, Wiley, New York.
300. Bossi, R., Mengers, P., and Qien C. (2007). "Radioscopy and Tomography, " in Nondestructive Testing Handbook: Vol. 10, ASNT, Columbus, OH.
301. Botsco, R. and Jones, T. (2007). "Thermography and Other Special Methods, " in Nondestructive Testing Handbook: Vol. 10, ASNT, Columbus, OH.
302. Botsko, R. (2007). "Introduction to Ultrasonic Testing, " Section 13, Part 2 in Nondestructive Testing Handbook: Vol. 10, ASNT, Columbus, OH.
303. st International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
304. Carlos, M. F., Miller, R. K., and Tamutus, T. A. (2000). "Acoustic Emission Local Area Monitoring System, " Structural Materials Technology: an NDT Conference, ASNT, Atlantic City, NJ.
305. rd International Conference on Emerging Technologies in NDT, A. A. Balkema, Netherlands 2004, ISBN 90 5809 645 9 (Volume)-. 90 5809 645 7(CD), pp. 167-172.
306. Carlyle, J. H. (1993). "Acoustic Emission Monitoring of the I-10 Mississippi River Bridge, " Phase Report No. R90-259, Physical Acoustics Corporation, Lawrenceville, NJ.
307. Carlyle, J. H. and Ely, T. M. (1992). "Acoustic Emission Monitoring of the I-95 Woodrow Wilson Bridge, " Phase Report No. R90-259, Physical Acoustics Corporation, Lawrenceville, NJ.
308. Carlyle, J. H. and Leaird, J. D. (1992). "Acoustic Emission Monitoring of the I-80 Bryte Bend Bridge, " Phase Report No. R90-259, Physical Acoustics Corporation, Lawrenceville, NJ.
309. Colla, C. and Wiggenhauser, H. (2000). "Developments in Impact-Echo for the investigation of Concrete Structures, " Structural Materials Technology: an NDT Conference, ASNT, Atlantic City, NJ.
310. Connor, J. (1976). Analysis of Structural Member Systems The Ronald Press Company, New York.
311. Connor, R. J., Santousuosso, B., and Pessiki, S. P. (2002). "Long-Term Wireless Remote Monitoring of the Lehigh River Bridge, " Proceedings, NDE Conference on Civil Engineering, ASNT, Cincinnati, OH.
312. Cullington, D. W., MacNeil, D., Paulson, P., and Elliot, J. (2001). "Continuous acoustic monitoring of grouted post-tensioned concrete bridges, " NDT & E International, Vol. 34, No 2.
313. De Witt, D. (1988). Theory and Practice of Radiation Thermometry, John Wiley, New York.
314. Demma, A., Alleyne, B., and Pavlakovie, B. (2005). "Testing of Buried Pipelines using Guided Waves, " Proceedings of the 2005 ASNT Fall Conference, Columbus, OH.
315. Dennis, M. (2005). "Industrial Computed Tomography, " in ASM Handbook: Non Destructive Evaluation and Quality Control, Vol. 17, ASM, Materials Park, OH
316. Doebling, S.W., Farrar, C.R., Prime, M.B., and Shevitz, D. W. (1996). "Damage Identification and Health of Structural and Mechanical Systems from Changes in their Vibrational Characteristics: A Literature Review, " Los Alamos National Laboratory Report, LA-13070-MS.
317. nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
318. Duke, J. C. and Horne, M. R. (2006). "Viability of Monitoring Acoustic Emission from Crack Growth in Bridges, " NDE Conference on Civil Engineering, ASNT, St. Louis, MO.
319. Dunegan, H., Harris, D., and Tetelman, A. (1970). "Detection of Fatigue Crack Growth by Acoustic Emission Techniques, " Materials Evaluation, Vol. 28, No. 10, Columbus, OH.
320. Emigh, C., Iddings, F., and Willenberg, J. (2007). "Radiation Principles and Sources, " in Nondestructive Testing Handbook: Vol. 10, ASNT, Columbus, OH.
321. Endo, K. (2000). "A study on the Application of the Acoustic Emission Method for Steel Bridges, " Masters of Science in Engineering Thesis, The University of Texas at Austin, Austin, TX.
322. Ettouney, M. and Alampalli, S. (2000). "Engineering Structural Health. " ASCE Structures Congress 2000, Philadelphia, PA.
323. Ettouney, M. and Alampalli, S. (2012). Infrastructure Health in Civil Engineering, Applications and Management, CRC Press, Boca Raton, FL.
324. Ettouney, M., Daddazio, R., Hapij, A., and Aly, A., (1998), "Health Monitoring of Complex Structures, " Proceedings, Smart Structures and Materials 1998: Industrial and Commercial Applications of Smart Structures Technologies, SPIE, Vol. 3326.
325. Farrar, C. and Doebling, S. (1999). "Damage Detection and Evaluation II, " in Modal Analysis and Testing, Editors: Silva, J. and Maia, N. NATO Science Series, Kluwer Academic Publishers, London, UK.
326. Farrar, C. and Jauregui, D. (1996). "Damage Detection Algorithms Applied to Experimental and Numerical Modal Data from the I-40 Bridge, " Los Alamos National Laboratory Report No. LA-13074-MS, Los Alamos, NM.
327. Farrar, C., Baker, W., Bell, T., Cone, K., Darling, T., Duffey, T., Eklund, A., and Migliori, A. (1994). Dynamic Characterization and Damage Detection in the I-40 Bridge over the Rio Grande, Los Alamos National Laboratory Report LA-12767-MS.
328. Fisk, P. (2008). "Sonic / Ultrasonic Testing for Bridge Inspections, " NDE/NDT for Highway and Bridges: Structural Materials Technology (SMT), ASNT, Oakland, CA.
329. Fu, Y. and Dewolf, J. (2001). "Monitoring and Analysis of a Bridge with Partially Restraind Bearings, " ASCE Journal of Bridge Engineering, 6(1).
330. Garcia, G. and Stubbs, N. (1995). "Effect of damage size and location on the stiffness of a rectangular beam, " Smart Structures and Materials, San Diego, CA.
331. Graps, A. (1995). Introduction to Wavelets, IEEE Computational Science and Engineering, IEEE, Los Alamitos, CA.
332. Green, A., Blackburn, P., Craig, B., Cross, N., Ferdinand, M., Fowler, T., and Robinson, D. (1987). "Acoustic Emission Applications in the Petroleum and Chemical Industries, " in Nondestructive Testing Handbook: Volume Five, Acoustic Emission Testing, ASNT, Columbus, OH.
333. Greene, A. (2005). "Radiographic Inspection, " in ASM Handbook: Non Destructive Evaluation and Quality Control, Vol. 17, ASM, Materials Park, OH
334. Gucunski, N., Rascoe, C., Wang, Z., Chen, Y., and Fang, T. (2008). "Automated Interpretation of Bridge Deck Impact Echo Data Using Three-Dimensional Visualization, " NDE/NDT for Highways and Bridges: Structural Materials Technology (SMT), ASNT, Oakland, CA.
335. Hamstad, M. A., O'Gallagher, A., and Gary, J. (2002). "A Wavelet Transform Applied To Acoustic Emission Signals: Part 1: Source Identification, " Journal of Acoustic Emission, 20, 39-61.
336. Hardy, G. and Bolen, J. (2005). "Thermal Inspection, " in ASM Handbook, ASM International, Materials Park, OH.
337. He, J. and Fu, Z. (2001). Modal Analysis, Butterworth Heinemann, Boston.
338. nd International Workshop on Structural Health Monitoring, Stanford University, Stanford, CA.
339. Housner, G., and Masri, S. (1996). "Structural Control Issues Arising from the Northridge and Kobe Earthquakes, " Proceedings of 11th World Conference on Earthquake Engineering, Mexico, Paper No. 2009.
340. Hwang, N. E., Shen, Z., Long, S. R., Wu, M. C., Shih, H., Zheng, Q., Yen, N. C., Tung, C. C., and Liu, H. H. (1998). "The Empirical Mode Decomposition and the Hilbert Spectrum for Nonlinear and Non-Stationary Time Series Analysis, " Proceedings of the Royal Society, London, 454, 903-995.
341. Hubbard, B. (1998). The World According to WAVELETS, A. K. Peters, Natick, MA.
342. Jiles, D. C. (1986). "Evaluation of the Properties and Treatment of Ferromagnetic Steels Using Magnetic Measurements, " Proceedings of the Nondestructive Evaluation of Ferromagnetic Materials, Houston, TX.
343. Karbhari, V., Kaiser, H., Navada, R., Ghosh, K., and Lee, L. (2005). "Methods for Detecting Defects in Composite Rehabilitated Concrete Structures, " Submitted to Oregon Department of Transportation, and Federal Highway Administration, Report No. SPR 336.
344. Kim, J. and Stubbs, N. (1995a). "Damage Detection in Offshore Jacket Structures from Limited Modal Information, " International Journal of Offshore and Polar Engineering, 5(1), 58-66.
345. Kim, J. and Stubbs, N. (1995b). "Modal-Uncertainty Impact and Damage-Detection Accuracy in Plate Girders, " Journal of Structural Engineering, ASCE Publication, 121(10).
346. Klausenberger, F. and Barton, J. (1977). "Detection of Flaws in Reinforcing Steel in Prestressed Concrete Bridge Members, " Report on Contract No. DOTFH-11-8999, FHWA, Washington, DC.
347. Koerner, R. and Lord, A. (1982). Use of Acoustic Emissions to Predict Ground Stability Federal Highway Administration Report No. FHWA / RD-82/052, Washington, DC.
348. Koerner, R., McCabe, W., and Lord, A. (1981). "Acoustic Emission Behavior and Monitoring of Soils, " Acoustic Emissions in Geotechnical Engineering Practice. American Society for Testing and Material. ASTM STP 750. Philadelphia, PA
349. Lin, L., Lee, G., Liang, Z., and O'Connor, J. (2005). "Health Monitoring of Bridge Bearings, " Proceedings of the 2005 ASNT Fall Conference, Columbus, OH.
350. Maclachlan-Spicer, J., Kerns, W., Aamodt, L., and Murphy, J. (1991). "Time Resolved Infrared Radiometry of Multilayer Organic Coatings Using Surface and Subsurface Heating, " Thermosense XIII, Editor: Baird, G. Proceedings of Society of Photo-Opt. Instrumentation Engineering (SPIE), Vol. 1467.
351. Maldague, X. (2002). "Introduction to NDT by Active Infrared Thermography, " Materials Evaluation, ASNT, Vol. 60, No. 9, Columbus, OH.
352. Miller, R. (2007). "Acoustic Emission Testing, " in Nondestructive Testing Handbook: Vol. 10, Nondestructive Testing Overview, ANST, Columbus, OH.
353. Moore, P. (2001). NDT Handbook on Infrared Technology, Editor: Maldague, X. ASNT Handbook Series, ASNT Press, Columbus, OH.
354. NYSDOT. (1997). Bridge Inspection Manual. New York State Department of Transportation, Albany, NY.
355. Owens, S., Rose, J., Mu, J., and Zhang, L. (2005). "A new High Frequency Long Range Ultrasonic Guided Wave Inspection System for Pipes, " Proceedings of the 2005 ASNT Fall Conference, Columbus, OH.
356. Pandey, A. K. and Biswas, M. (1994). "Damage Detection in Structures using Changes in Flexibility, " Journal of Sound and Vibration, 169(1), 3-17.
357. Pandey, A. K., Biswas, M., and Samman, M. (1991). "Damage Detection in from changes in curvature mode shapes, " Journal of Sound and Vibration, 145(9), 312-332.
358. Pendat, J. and Piersol, A. (2010). Random Data: Analysis and Measurement Procedures, Wiley, New York.
359. Pollock, A. (2005). "Acoustic Emission Inspection, " in ASM Handbook: Non Destructive Evaluation and Quality Control, Vol. 17, ASM, Materials Park, OH
360. Post, D., Han, B., and Ifju, P. (1994). High Sensitivity Moiré: Experimental Analysis for Mechanics and Materials, Springer-Verlag, New York.
361. th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference.
362. Riahi, M. and Khosrowzadeh, B. (2005). "Development of Acoustic Emission AE) Method for the Diagnosis of Corrosion in Steel Pipes, " Proceedings of the 2005 ASNT Fall Conference, Columbus, OH.
363. Rollwitz, W. (2005a). "Magabsorption NDE, " in ASM Handbook: Non Destructive Evaluation and Quality Control, Vol. 17, ASM, Materials Park, OH.
364. Rollwitz, W. (2005b). "Microwave inspection, " in ASM Handbook: Non Destructive Evaluation and Quality Control, Vol. 17, ASM, Materials Park, OH.
365. Rose, J. (2004). Ultrasonic Waves in Solid Media, Cambridge University Press, Cambridge, UK.
366. Sanayei, M. and Saletnik, M. J. (1996a). "Parameter Estimation of Structures From Static Strain Measurements, Part I: Formulation, " Journal of Structural Engineering, ASCE, 122(5), 555-562.
367. Sanayei, M. and Saletnik, M. J. (1996b). "Parameter Estimation of Structures From Static Strain Measurements, Part II: Error Sensitivity Analysis, " Journal of Structural Engineering, ASCE, 122(5), 563-572.
368. Sanayei, M., McClain, J., Wadia-Fascetti, S., and Santini, E. (1999). "Parameter Estimation Incorporating Modal Data and Boundary Conditions, " Journal of Structural Engineering, ASCE, 125(9), 1048-1055.
369. Shepard, S., Lhota, J., Ahmed, T., Rubadeux, B., and Wang, D. (2001). "Qualification and Automation of Pulse Thermographic NDE, " in Nondestructive Evaluation of Materials and Composites, Editor: Baaklini, et al. Proceedings of Society of Photo-Opt. Instrumentation Engineering (SPIE), Vol. 4336.
370. Spanos, P. D. and Failla, G. (2004). "Evolutionary Spectra Estimation Using Wavelets, " Journal of Engineering Mechanics, ASCE, Reston, VA, 130(8), 952-960.
371. Stubbs, N. and Garcia, G. (1996). "Application of Pattern Recognition to Damage Localization, " Microcomputers in Engineering, Vol. 11. Computer-Aided Civil and Infrastructure Engineering, pp 395-409.
372. Stubbs, N. and Kim, J. T. (1994). "Field Verification of a Nondestructive Damage Localization and Severity Estimation Algorithm, " Report prepared for New Mexico State University, Las Cruces, NM.
373. th International Model Analysis Conference, Nashville, TN.
374. Tracy, N. (2007). "Liquid Penetrant Testing, " in Nondestructive Testing Handbook: Vol. 10, ANST, Columbus, OH.
375. nd International Workshop on Structural Health Monitoring, Stanford University, Stanford, CA.
376. nd International Workshop on Structural Health Monitoring of Innovative Civil Engineering Structures, ISIS Canada Corporation, Manitoba, Canada.
377. th International Modal Analysis Conference, Vol. 2, Nashville, TN.
378. Zimmerman, D. C. and Kaouk, M. (1994). "Structural Damage Detection using a Minimum Rank Update Theory, " Journal of Vibration Acoustics, (2), 222-231.
379. Agrawal, A., Kawaguchi, A., and Qian, G., (2009) "Bridge Element Deterioration Rates: Phase I Reprot, " New York State Department of Transportation, Project # C-01-51, Albany, NY.
380. Alampalli, S., (2001) "Peer Review to Enhance State Transportation Research Program, " Leadership andmanagement in Engineering, ASCE, Vol 1, No. 2, pp. 27-28.
381. Alampalli, S. and Ettouney, M., (2002) Proceedings of the Workshop on Engineering Structural Health, Sponsored by NYS-DOT, Albany, NY.
382. Arya, S., O'Neill, M., and Pincus, G., (1979), Design of Structures and Foundations for Vibrating Machines, Gulf Publishing Company, Houston, TX.
383. Aven, T., (2003) Foundations of Risk Analysis, John Wiley and Sons, West Sussex, England.
384. Barker, R. and Puckett, J., (2007) Design of Highway Bridges: An LRFD Approach, John Wiley Sons, Hoboken, NJ.
385. Bellman, R., (1964) Perturbation Techniques in Mathematics, Physics and Engineering, Rinehart and Winston, New York, NY.
386. Benjamin, J., and Cornell, A., (1970) Probability, Statistics, and Decision for Civil Engineers, McGraw-Hill, New York, NY.
387. Biggs, J., (1964) Intorduction to Structural Dynamics, McGraw Hill, New York, NY.
388. Chakraborty, S. and DeWolf, J., (2006) "Development and Implementation of a Continuous Strain Monitoring on Multi-Girder Composite Steel Bridge, " Journal of Bridge Engineering, ASCE, Vol 11, No. 6, pp. 753-762.
389. Crandal, S. and Mark, W., (1963) Random Vibrations, Academic Press, New York.
390. Daddazio, R. and Ettouney, M., (1987) "The Effect of Uncertain Boundary Conditions on the Large Displacement Elasto-Plastic Response of Impulsively Loaded Structures, " Proceedings, ASCE Engineering Mechanics 6th Specialty Conference, Buffalo, NY.
391. Daddazio, R. and Ettouney, M., (1990) "Boundary Element Methods in Probabilistic Acoustic Radiation Problems, " Journal of Vibration and Acoustic, ASME, Vol 112, pp. 556-560.
392. Daddazio, R. and Ettouney, M., (1991) "'Probabilistic Acoustic Analysis" in Boundary Element Methods in Acoustics, Editors: Ciskowski, R. D. and Brebbia, C. A. Computational Mechanics Publications, Southampton, UK, pp. 95-108.
393. Elishakoff, A., (1983) Probabilistic Methods to the Theory of Structures, John Wiley & Sons.
394. Elsayed, A. E. and Ettouney, M. M., (1994) "Perturbation Analysis of Linear Programming Problems with Random Parameters, " Computers and Operation Research, Vol 21, No 2, pp. 211-224.
395. Ettouney, M. and Alampalli, S., (2011) Infrastructure Health in Civil Engineering, Applications and Management, CRC Press, Boca Raton, FL.
396. Ettouney, M., Benaroya, H., and Wright, J., (1989a) "Probabilistic Boundary Element Methods (PBEM), " in Computational Mechanics of Probabilistic and Reliability Analysis, Editors: Liu, W. K. and Belytschko, T. Elmpress International, Lausanne, Switzerland, pp. 141-166.
397. Ettouney, M., Benaroya, H., and Wright, J., (1989b) "Boundary Element Methods in Probabilistic Structural Analysis (PBEM), " Applied Mathematics Modeling, Vol 13, No. 7, pp. 432-441.
398. Ettouney, M., Daddazio, R. and Abboud, N. (1993) "Stochastic Analysis of Soil Dynamics" in Computational Stochastic Mechanics, Editors: Cheng, A. H-D. and Yang, C. Y. Computational Mechanics Publications, Southampton, UK.
399. FEMA, (2009). "Handbook for Rapid Visual Screening of Buildings to Evaluate Terrorism Risk, " FEMA 455, Federal Emergency Management Agency, FEMA Publication, Washington, DC.
400. Farrar, C. R. and Doebling, S.W., (1998) Damage Detection-Field Application to a Large Structure. Proceedings of the Modal Analysis & Testing, NATO-Advanced Study Institute, Sesimbra, Portugal.
401. Johnson, P. A., and Dock, D. A., (1998) "Probabilistic bridge scour estimates, " Journal of Hydraulic Engineering, ASCE, 124(7), 750-755.
402. Johnson, P. A., and Niezgoda, S. L., (2003) "Risk-based method for selecting scour countermeasures, " Journal of Hydraulic Engineering, ASCE, 130(2), 121-128.
403. Johnson, P. A., and Simon, A., (1997) "Reliability of bridge foundations in modified channels, " Journal of Hydraulic Engineering, ASCE, 123(7), 648-651.
404. Koller, G., (2000) Risk Modeling for Determining Value and Decision Making, Chapman & Hall/CRC Press, Boca Raton, FL.
405. Lawler, G. F., (1995) Introduction to Stochastic Processes, Chapman & Hall/CRC, New York.
406. Melcher, R., (2002) Structural Reliability Analysis and Prediction, John Wiley & Sons, New York, NY.
407. Moses, F., (2001) "Calibration of Load Factors for LRFR Bridge Evaluation, " National Cooperative Highway Research Program, NCHRP Project 454, Washington, DC.
408. Murdock, M. B., (2009) "Comparative Load Rating Study Under LRFR And LFR Methodologies For Alabama Highway Bridges, " Auburn University, Auburn, AL.
409. Neubeck, K., (2004) Practical Reliability Analysis, Prentice-Hall, NJ.
410. th Edition, Engineering Press, Austin, TX
411. NHTS, (2001), "Highlights of the 2001 National Household Travel Survey, " Bureau of Transportation Statistics, U.S. Department of Transportation, Washington, DC.
412. nd Edition, Addison-Wesley, Menlo Park, CA.
413. Pendat, J., and Piersol, A., (2010) Random Data: Analysis and Measurement Procedures, Wiley, New York.
414. th Edition, McGraw-Hill, New York.
415. Ruegg, R. T. and Marshall, H. E., (1990) Building Economics: Theory and Practice, Van Nostrand Reinhold, New York.
416. Rausand, M. and Hoyland, A., (2004) System Reliability Theory: Models, Statistical Methods, and Applications, Wiley, NJ.
417. Ravindra, M. and Galambos, T., (1978) "Load and Resistance Factor Design for Steel, " Journal of Structural Division, ASCE, Vol 104, no 9, pp. 1337-1353.
418. Schlaifer, R. S., (1969) Analysis of Decision under Uncertainty, McGraw-Hill, New York, NY.
419. Stein, S. and Sedmera, K., (2006) "Risk-Based Management Guidelines for Scour at Bridges with Unknown Foundations, " National Cooperative Highway Research Program, NCHRP Project 24-25, Washington, DC.
420. Timoshenko, S. and Gere, J., (1961) Theory of Elastic Stability, McGraw-Hill, New York.
421. Trueman, R. (1977) An Introduction to Quantitative Methods for Decision Making, Holt, Rinehart, and Winston, New York, NY.
422. Von Neumann, J. and Morgenstern, O., (1944) Theory of Games and Economics, Princeton University Press, Princeton, NJ.