Plasticity: Mathematical theory and numerical analysis: Second edition

Interdisciplinary Applied Mathematics

Volumn 9, Issue , 2013, Pages 1-421

  Han, Weimin ^a   Reddy, B Daya ^b  

^a UNIVERSITY OF IOWA   (United States)

^b UNIVERSITY OF CAPE TOWN   (South Africa)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85098003253     PISSN: 09396047     EISSN: 21969973     Source Type: Book Series    
DOI: None     Document Type: Chapter

References (193)

1. R.A. Adams, Sobolev Spaces, Academic Press, New York, 1975.
2. E.C. Aifantis, On the microstructural origin of certain inelastic models, ASME Jour. Eng. Mat. Tech. 106 (1984), 326–330.
3. L. Anand and M. Kothari, A computational procedure for rate-independent crystal plasicity, J. Mech. Phys. Solids 44 (1996), 525–558.
4. S.S. Antman, Nonlinear Problems of Elasticity, Second Edition, Springer-Verlag, New York, 2005.
5. S.S. Antman and J.E. Osborn, The principle of virtual work and integral laws of motion, Archive for Rational Mechanics and Analysis 69 (1979), 231–262.
6. K. Atkinson and W. Han, Theoretical Numerical Analysis: A Functional Analysis Framework, Third Edition, Springer-Verlag, 2009.
7. I. Babuška, The finite element method with Lagrangian multipliers, Numer. Math. 20 (1973), 179–192.
8. I. Babuška and A.K. Aziz, Survey lectures on the mathematical foundations of the finite element method, in A.K. Aziz, ed., The Mathematical Foundations of the Finite Element Method with Applications to Partial Differential Equations, Academic Press, New York, 1972, 3–359.
9. I. Babuška and T. Strouboulis, The Finite Element Method and its Reliability, Oxford University Press, 2001.
10. J. Barré de Saint Venant, Mémoire sur l’établissement des équations différentielles des mouvements intérieurs opérés dans les corps solides ductiles..., J. Math. Pures et Appl. 16 (1871), 308–316.
11. K.-J. Bathe, Finite Element Procedures, Englewood Cliffs, NJ, 1996.
12. J. Bauschinger, Yearly report, Mitt. Mech. Lab. Munich, 1886.
13. J. Bergh and J. Löfström, Interpolation Spaces, An Introduction, Springer-Verlag, Berlin, 1976.
14. W.W. Bird and J.B. Martin, A secant approximation for holonomic elastic-plastic incremental analysis with a von Mises yield condition, Eng. Comp. 3 (1986), 192–201.
15. G. Birkhoff, M.H. Schultz, and R.S. Varga, Piecewise Hermite interpolation in one and two variables with applications to partial differential equations, Numer. Math. 11 (1968), 232–256.
16. E. Bonnetier, Mathematical treatment of the uncertainties appearing in the formulation of some models of plasticity, Ph.D. thesis, University of Maryland, 1988.
17. D. Braess, Finite Elements: Theory, Fast Solvers, and Applications in Solid Mechanics, Third Edition, Cambridge University Press, Cambridge, 2007.
18. S.C. Brenner and L.R. Scott, The Mathematical Theory of Finite Element Methods, Third Edition, Springer-Verlag, New York, 2008.
19. H. Brezis, Problèmes unilateraux, J. Math. Pures et Appl. 51 (1972), 1–168.
20. F. Brezzi, On the existence, uniqueness and approximation of saddle-point problems arising from Lagrange multipliers, RAIRO Anal. Numér. 8 (1974), 129–151.
21. F. Brezzi and M. Fortin, Mixed and Hybrid Finite Element Methods, Springer-Verlag, Berlin, 1991.
22. C. Carstensen, Numerical analysis of the primal problem of elastoplasticity with hardening, Numer. Math. 82 (1999), 577–597.
23. C. Carstensen and J. Alberty, Numerical analysis of time-depending primal elastoplasticity with hardening, SIAM J. Numer. Anal. 37 (2000), 1271–1294.
24. C. Carstensen, D. Zarrabi and J. Alberty, Adaptive numerical analysis in primal elastoplasticity with hardening, Comput. Methods Appl. Mech. Engrg. 171 (1999), 175–204.
25. C. Carstensen, K. Hackl and A. Mielke, Non-convex potentials and microstruc-tures in finite-strain plasticity, Proc. R. Soc. London A458 (2002), 299–317.
26. P. Carter and J.B. Martin, Weak bounding functions for plastic materials, J. Appl. Mech. 43 (1976), 434–438.
27. J. Céa, Approximation variationnelle des problèmes aux limites, Ann. Inst. Fourier (Grenoble) 14 (1964), 345–444.
28. P. Chadwick, Continuum Mechanics: Concise Theory and Problems. George Allen & Unwin, London, 1976. Corrected and enlarged edition published by Dover, New York, 1999.
29. W.F. Chen and D.J. Han, Plasticity for Structural Engineers, Springer-Verlag, New York, 1988.
30. P.G. Ciarlet, The Finite Element Method for Elliptic Problems, North Holland, Amsterdam, 1978.
31. P.G. Ciarlet, Mathematical Elasticity, Vol. I: Three-Dimensional Elasticity, North Holland, Amsterdam, 1988.
32. P.G. Ciarlet, Basic error estimates for elliptic problems, in P.G. Ciarlet and J.-L. Lions, eds., Handbook of Numerical Analysis, Vol. II, North-Holland, Amsterdam, 1991, 17–351.
33. P. Clément, Approximation by finite element functions using local regularization, RAIRO Anal. Numer. 9R2 (1975), 77–84.
34. B. Coleman and M.E. Gurtin, Thermodynamics with internal state variables, J. Chem. Phys. 47 (1967), 597–613.
35. C. Comi and G. Maier, On the convergence of a backward difference iterative procedure in elastoplasticity with nonlinear kinematic and isotropic hardening, in D.R.J. Owen, E. Hinton, and E. Oñate, eds., Computational Plasticity: Models, Software and Applications, Pineridge Press, Swansea, 1989, 323–334.
36. M.A. Crisfield, Accelerating and damping the modified Newton–Raphson method, Comp. Struct. 18 (1984), 395–407.
37. G. Dal Maso, A. DeSimone and M. G. Mora, Quasistatic evolution problems for linearly elastic-perfectly plastic materials. Arch. Ration. Mech. Anal. 180 (2006), 237–291.
38. R. Dautray and J.L. Lions, Mathematical Analysis and Numerical Methods for Science and Technology, Vol. II, Functional and Variational Methods, Springer-Verlag, New York, 1988.
39. E. de Souza Neto, D. Perić, and D.R.J. Owen, Computational Methods for Plasticity: Theory and Applications, John Wiley & Sons, Chichester, United Kingdom, 2008.
40. J.K. Djoko, F. Ebobisse, A.T. McBride and B.D. Reddy, A discontinuous Galerkin formulation for classical and gradient plasticity. Part 2: Algorithms and numerical analysis, Computer Methods in Applied Mechanics and Engineering 197 (2007), 1–21.
41. J. Douglas Jr. and T. Dupont, Galerkin methods for parabolic equations, SIAM J. Numer. Anal. 7 (1970), 575–626.
42. D. C. Drucker, A more fundamental approach to plastic stress–strain relations, in Proc. 1st US National Congress of Applied Mechanics, ASME, New York, 1951, 487–491.
43. G. Duvaut and J.-L. Lions, Inequalities in Mechanics and Physics, Springer-Verlag, Berlin, 1976.
44. I. Ekeland and R. Temam, Convex Analysis and Variational Problems, North-Holland, Amsterdam, 1976.
45. I. Ertürk, J.A.W. van Dommel and M.G.D. Geers, Energetic dislocation interactions and thermodynamical aspects of strain gradient crystal plasticity theories, J. Mech. Phys. Solids 57 (2009), 1801–1814.
46. A.G. Evans and J. W. Hutchinson, A critical assessment of theories of strain gradient plasticity, Acta Mat. 57 (2009), 1675–1688.
47. L.C. Evans, Partial Differential Equations, Second Edition, American Mathematical Society, 2010.
48. R.A. Eve, T. Gültop, and B.D. Reddy, An internal variable finite-strain theory of elastoplasticity within the framework of convex analysis, Quart. Appl. Math. 48 (1990), 625–643.
49. R.A. Eve and B.D. Reddy, The variational formulation and solution of problems of finite-strain elastoplasticity based on the use of a dissipation function, Int. J. Num. Meths. Eng. 37 (1994), 1673–1695.
50. R.A. Eve, B.D. Reddy, and R.T. Rockafellar, An internal variable theory of elastoplasticity based on the maximum plastic work inequality, Quart. Appl. Math. 48 (1990), 59–83.
51. R.S. Falk, Error estimates for the approximation of a class of variational inequalities, Math. Comp. 28 (1974), 963–971.
52. G. Fichera, Problemi elastostatici con vincoli unilaterali: il problema di Sig-norini con ambigue condizioni al contorno, Mem. Accad. Naz. Lincei 8 (7) (1964), 91–140.
53. N.A. Fleck, and J.W. Hutchinson, Strain gradient plasticity, Adv. Appl. Mech. 33 (1997), 295–361.
54. N.A. Fleck, and J.W. Hutchinson, A reformulation of strain gradient plasticity, J. Mech. Phys. Solids 49 (2001), 2245–2271.
55. R. Fletcher, Practical Methods of Optimization. Volume 1: Unconstrained Problems; Volume 2: Constrained Problems, Wiley, New York, 1980.
56. A. Friâa, Le matériau de Norton-Hoff generalisé et ses applications à l’analyse limite, C. R. Acad. Sci. A 286 (1978), 953–956.
57. A. Friedman, Variational Principles and Free-Boundary Problems, John Wiley & Sons, New York, 1982.
58. A. Giacomini and L. Lussardi, Quasistatic evolution for a model in strain gradient plasticity, SIAM J. Math. Anal. 40 (2008), 1201–1245.
59. V. Girault and P.-A. Raviart, Finite Element Methods for Navier–Stokes Equations, Theory and Algorithms, Springer-Verlag, Berlin, 1986.
60. R. Glowinski, Numerical Methods for Nonlinear Variational Problems, Springer-Verlag, New York, 1984.
61. R. Glowinski, J.-L. Lions, and R. Trémolières, Numerical Analysis of Variational Inequalities, North-Holland, Amsterdam, 1981.
62. P. Grisvard, Elliptic Problems in Nonsmooth Domains, Pitman, Boston, 1985.
63. P. Gudmundson, A unified treatment of strain gradient plasticity, J. Mech. Phys. Solids 52 (2004), 1379–1406.
64. M.E. Gurtin, Modern continuum thermodynamics, in S. Nemat-Nasser, ed., Mechanics Today, Pergamon, Oxford, 1974, 168–210.
65. M.E. Gurtin, An Introduction to Continuum Mechanics, Academic Press, New York, 1981.
66. M.E. Gurtin, A theory of viscoplasticity that accounts for geometrically necessary dislocations, J. Mech. Phys. Solids 50 (2002), 5–32.
67. M.E. Gurtin and L. Anand, A theory of strain-gradient plasticity for isotropic, plastically irrotational materials. Part I: Small deformations, J. Mech. Phys. Solids 53 (2005), 1624–1649.
68. M.E. Gurtin, L. Anand, and S.P. Lele, Gradient single-crystal plasticity with free energy dependent on dislocation densities, J. Mech. Phys. Solids 55 (2007), 1853–1878.
69. M.E. Gurtin, E. Fried, and L. Anand, The Mechanics and Thermodynamics of Continua, Cambridge University Press, 2010.
70. C. Hager and B. Wohlmuth, Nonlinear complementarity functions for plasticity problems with frictional contact, Comput. Meth. Appl. Mech. Engrg 198 (2009), 3411–3427.
71. B. Halphen and Q.S. Nguyen, Sur les matériaux standards généralisés, J. Méc. 14 (1975), 39–63.
72. W. Han, A posteriori error analysis for linearizations of nonlinear elliptic problems and their discretizations, Math. Meths. Appl. Sci. 17 (1994), 487–508.
73. W. Han, Quantitative error estimates for idealizations in linear elliptic problems, Math. Meths. Appl. Sci. 17 (1994), 971–987.
74. W. Han, A Posteriori Error Analysis via Duality Theory, with Applications in Modeling and Numerical Approximations, Springer, New York, 2005.
75. W. Han, S. Jensen, and B.D. Reddy, Numerical approximations of internal variable problems in plasticity: error analysis and solution algorithms, Numer. Linear Algebr. 4 (1997), 191–204.
76. W. Han, S. Jensen, and I. Shimansky, The Kačanov method for some nonlinear problems, Appl. Numer. Anal. 24 (1997), 57–79.
77. W. Han and B.D. Reddy, On the finite element method for mixed variational inequalities arising in elastoplasticity, SIAM J. Numer. Anal. 32 (1995), 1778– 1807.
78. W. Han and B.D. Reddy, Computational plasticity: the variational basis and numerical analysis, Comput. Mech. Adv. 2 (1995), 283–400.
79. W. Han and B.D. Reddy, Plasticity: Mathematical Theory and Numerical Analysis, Springer, New York (1999).
80. W. Han, B.D. Reddy, and G.C. Schroeder, Qualitative and numerical analysis of quasistatic problems in elastoplasticity, SIAM J. Numer. Anal. 34 (1997), 143–177.
81. W. Han and M. Sofonea, Quasistatic Contact Problems in Viscoelasticity and Viscoplasticity, American Mathematical Society and International Press, Rhode Island, 2002.
82. J. Haslinger, I. Hlaváček, and J. Nečas, Numerical methods for unilateral problems in solid mechanics, in P.G. Ciarlet and J.-L. Lions, eds., Handbook of Numerical Analysis, Vol. IV, North-Holland, Amsterdam, 1996, 313–485.
83. R. Hill, A theory of yielding and plastic flow of anisotropic metals, Proc. Roy. Soc. A 193 (1948), 281–297.
84. R. Hill, Constitutive dual potentials in classical plasticity, J. Mech. Phys. Solids 35 (1987), 39–63.
85. I. Hlaváček, A finite element solution for plasticity with strain-hardening, RAIRO Anal. Numér. 14 (1980), 347–368.
86. I. Hlaváček, J. Haslinger, J. Nečas, and J. Lovíšek, Solution of Variational Inequalities in Mechanics, Springer-Verlag, New York, 1988.
87. N.J. Hoff (editor), First IUTAM Colloquium on Creep in Structures (Stanford, California, 11–15 July 1960), Springer-Verlag, Berlin, 1962.
88. H. Huang, W. Han, and J. Zhou, The regularization method for an obstacle problem, Numer. Math. 69 (1994), 155–166.
89. T.J.R. Hughes, The Finite Element Method: Linear Static and Dynamic Finite Element Analysis, Prentice-Hall, Englewood Cliffs, NJ, 1987.
90. C. Johnson, Existence theorems for plasticity problems, J. Math. Pures Appl. 55 (1976), 431–444.
91. C. Johnson, On finite element methods for plasticity problems, Numer. Math. 26 (1976), 79–84.
92. C. Johnson, On plasticity with hardening, J. Math. Anal. Appls. 62 (1978), 325–336.
93. C. Johnson, A mixed finite element method for plasticity problems with hardening, SIAM J. Numer. Anal. 14 (1977), 575–583.
94. C. Johnson, A convergence estimate for an approximation of a parabolic variational inequality, SIAM J. Numer. Anal. 13 (1977), 599–606.
95. C. Johnson, Numerical Solutions of Partial Differential Equations by the Finite Element Method, Cambridge University Press, Cambridge, 1987.
96. S.R. Kalidindi, C.A. Bronkhorst, and L. Anand, Crystallographic texture evolution in bulk deformation processing of fcc metals, J. Mech. Phys. Solids 40 (1992), 537–569.
97. N. Kikuchi and J.T. Oden, Contact Problems in Elasticity: A Study of Variational Inequalities and Finite Element Methods, SIAM, Philadelphia, 1988.
98. D. Kinderlehrer and G. Stampacchia, An Introduction to Variational Inequalities and Their Applications, Academic Press, New York, 1980.
99. D. Knees, On global spatial regularity in elasto-plasticity with linear hardening, Calc. Var. and PDEs 36 (2009), 611–625.
100. D. Knees, On global spatial regularity and convergence rates for time dependent elasto-plasticity, Math. Models Meths. Appl. Sci. 20 (2010), 1823–1858.
101. D. Knees, Global spatial regularity for a regularized elasto-plastic model, GAMM-Mitteilungen 34 (2011), 21–27.
102. W.T. Koiter, Stress-strain relations, uniqueness and variational theorems for elastic-plastic material with a singular yield surface, Quart. Appl. Math. 11 (1953), 29–53.
103. W.T. Koiter, General theorems for elastic-plastic solids, in I.N. Sneddon and R. Hill, eds., Progress in Solid Mechanics, North-Holland, Amsterdam, 1960, 167–221.
104. V.G. Korneev and U. Langer, Approximate Solution of Plastic Flow Theory Problems, Teubner-Texte 65, Leibniz, 1984.
105. M. Kuroda and V. Tvergaard, On the formulations of higher-order strain gradient crystal plasticity models, J. Mech. Phys. Solids 56 (2008), 1591–1608.
106. J. Lemaitre and J.-L. Chaboche, Mechanics of Solid Materials, Cambridge University Press, Cambridge, 1990.
107. M. Lévy, Extrait du mémoire sur les équations générales des mouvements intérieurs des corps solids ductiles au delà des limites où l’élasticité pourrait les ramener à leur premier état, J. Math. Pures Appl. 16 (1871), 369–372.
108. Y. Li and I. Babuška, A convergence analysis of a p-version finite element method for one-dimensional elastoplasticity problem with constitutive laws based on the gauge function method, SIAM J. Numer. Anal. 33 (1996), 809– 842.
109. Y. Li and I. Babuška, A convergence analysis of an h-version finite element method with high order elements for two dimensional elastoplasticity problems, SIAM J. Numer. Anal. 34 (1997), 998–1036.
110. J.-L. Lions and G. Stampacchia, Variational inequalities, Comm. Pure Appl. Math. 20 (1967), 493–519.
111. J. Lubliner, On the thermodynamics foundations of non-linear solid mechanics, Int. J. Nonl. Mech. 7 (1972), 237–254.
112. D.G. Luenberger, Linear and Nonlinear Programming, Second Edition, Addison-Wesley, Reading, Mass., 1984.
113. A. Mainik and A. Mielke, Global existence for rate-independent gradient plasticity at finite strain, J. Nonlinear Sci. 19 (2009), 221–248.
114. J.E. Marsden and T.J.R. Hughes, Mathematical Foundations of Elasticity, Prentice-Hall, New Jersey, 1983.
115. J.B. Martin, Plasticity: Fundamentals and General Results, MIT Press, Cambridge, Mass., 1975.
116. J.B. Martin, An internal variable approach to the formulation of finite element problems in plasticity, in J. Hult and J. Lemaitre, eds., Physical Nonlinearities in Structural Analysis, Springer-Verlag, Berlin, 1981, 165–176.
117. J.B. Martin and S. Caddemi, Sufficient conditions for the convergence of the Newton-Raphson iterative algorithm in incremental elastic-plastic analysis, Euro. J. Mech. A/Solids 13 (1994), 351–365.
118. J.B. Martin and A. Nappi, An internal variable formulation for perfectly plastic and linear hardening relations in plasticity, Euro. J. Mech. A/Solids 9 (1990), 107–131.
119. J.B. Martin and B.D. Reddy, Variational principles and solution algorithms for internal variable formulations of problems in plasticity, in U. Andeaus et al., ed., Omaggio a Giulio Ceradini, Università di Roma “La Sapienza,” Roma, 1988, 465–477.
120. H. Matthies, Existence theorems in thermoplasticity, J. Méc. 18 (1979), 695– 711.
121. H. Matthies and G. Strang, The solution of nonlinear finite element equations, Int. J. Numer. Meths. Eng. 14 (1979), 1613–1626.
122. H. Matthies, G. Strang, and E. Christiansen, The saddle point of a differential program, in R. Glowinski, E. Rodin, and O.C. Zienkiewicz, eds., Energy Methods in Finite Element Analysis, Wiley, New York, 1979.
123. E. Melan, Zur Plastizität des räumlichen Kontinuums, Ing. Arch. 9 (1938), 116–125.
124. A. Menzel and P. Steinmann, On the continuum formulation of higher gradient plasticity for single and polycrystals, J. Mech. Phys. Solids 48 (2000), 1777– 1796.
125. A. Mielke, Energetic formulation of multiplicative elastoplasticity using dissipation distances, Contin. Mech. Thermodyn 15 (2003), 351–382.
126. A. Mielke, Existence of minimizers in incremental elasto-plasticity with finite strains, SIAM J. Math. Anal. 36 (2004), 384–404.
127. A. Mielke, Existence theory for finite-strain crystal plasticity with gradient regularization, in K. Hackl, ed., Proc. IUTAM Symposium on Variational Concepts with Applications to the Mechanics, Springer, Heidelberg, 2010.
128. G. J. Minty, Monotone (non linear) operators in Hilbert spaces, Duke Math. J. 29 (1962), 341–346.
129. J.J. Moreau, Sur les lois de frottement, de viscosité et plasticité, C. R. Acad. Sc. 271 (1970), 608–611.
130. J.J. Moreau, Application of convex analysis to the treatment of elastoplastic systems, in P. Germain and B. Nayroles, eds., Applications of Methods of Functional Analysis to Problems in Mechanics, Springer-Verlag, Berlin, 1976.
131. J.J. Moreau, Evolution problem associated with a moving convex set in a Hilbert space, J. Diff. Eqns 26 (1977), 347–374.
132. C.F. Niordson and J.W. Hutchinson, Basic strain gradient plasticity theories with application to constrained film deformation, J. Mech. Mat. Structs 6 (2011), 395–416.
133. W.D. Nix and H. Gao, Indentation size effects in crystalline materials: a law for strain gradient plasticity, J. Mech. Phys. Solids 46 (1998), 411–425.
134. F.H. Norton, Creep of Steel at High Temperatures, McGraw-Hill, New York, 1929.
135. J.T. Oden, Finite elements: an introduction, in P.G. Ciarlet and J.-L. Lions, eds., Handbook of Numerical Analysis, Vol. II, North-Holland, Amsterdam, 1991, 3–15.
136. J.T. Oden and J.N. Reddy, An Introduction to the Mathematical Theory of Finite Elements, Wiley-Interscience, New York, 1976.
137. N. Ohno and D. Okumura, Higher-order stress and grain size effects due to self-energy of geometrically necessary dislocations, J. Mech. Phys. Solids 55 (2007), 1879–1898.
138. N. Ohno, D. Okumura, and T. Shibata, Grain-size dependent yield behavior under loading, unloading and reverse loading, Int. J. Modern Phys. B 22 (2008), 5937–5942.
139. P.D. Panagiotopoulos, Inequality Problems in Mechanics and Applications, Birkhäuser, Boston, 1985.
140. D. Peirce, R. J. Asaro, and A. Needleman, Material rate dependence and localized deformation in crystalline solids, Acta Metall. 31 (1983), 1951–1976.
141. W. Prager, Recent developments in the mathematical theory of plasticity, J. Appl. Phys. 20 (1949), 235–241.
142. W. Prager and D. C. Drucker, Soil mechanics and plasticity analysis of limit design, Quart. Appl. Math. 10 (1952), 157–162.
143. L.T. Prandtl, Spannungsverteilung in plastischen Körpern, in Proc. 1st Intern. Congr. Mechanics, Delft, 1924, 43–54.
144. L.T. Prandtl, Ein Gedankenmodell zur kinetischen Theorie der festen Körper, Zeit. Angew. Math. und Mech (ZAMM) 8 (1928), 85–106.
145. A. Quarteroni and A. Valli, Numerical Approximation of Partial Differential Equations, Springer-Verlag, Berlin, 1994.
146. B.D. Reddy, Existence of solutions to a quasistatic problem in elastoplasticity, in C. Bandle et al., eds., Progress in Partial Differential Equations: Calculus of Variations, Applications, Pitman Research Notes in Mathematics 267, Longman, London, 1992, 233–259.
147. B.D. Reddy, Mixed variational inequalities arising in elastoplasticity, Nonl. Anal. Theory, Meths. and Appls. 19 (1992), 1071–1089.
148. B.D. Reddy, Introductory Functional Analysis with Applications to Boundary Value Problems and Finite Elements, Springer-Verlag, New York, 1998.
149. B.D. Reddy, The role of dissipation and defect energy in variational formulations of problems in strain-gradient plasticity. Part 1: Polycrystalline plasticity, Continuum. Mech. Thermodyn. 23 (2011), 527–549.
150. B.D. Reddy, The role of dissipation and defect energy in variational formulations of problems in strain-gradient plasticity. Part 2: Single-crystal plasticity, Continuum. Mech. Thermodyn. 23 (2011), 551–572.
151. B.D. Reddy, F. Ebobisse and A. T. McBride, Well-posedness of a model of strain gradient plasticity for plastically irrotational materials, Int. J. Plast. 24 (2008), 55–73.
152. B.D. Reddy and J.B. Martin, Algorithms for the solution of internal variable problems in plasticity, Comp. Meth. Appl. Mech. Engng. 93 (1991), 253–273.
153. B.D. Reddy and J.B. Martin, Internal variable formulations of problems in elastoplasticity: constitutive and algorithmic aspects, Adv. Appl. Mech. 47 (1994), 429–456.
154. B.D. Reddy, C. Wieners, and B. Wohlmuth, Finite element analysis and algorithms for single-crystal strain-gradient plasticity, Int. J. Numer. Meth. Engng. 90 (2012), 784–804.
155. M. Renardy and R.C. Rogers, An Introduction to Partial Differential Equations, Springer-Verlag, New York, 1993.
156. L.J. Rencontré, W.W. Bird, and J.B. Martin, Internal variable formulation of a backward difference corrector algorithm for piecewise linear yield surfaces, Meccanica 27 (1992), 13–24.
157. A. Reuss, Berücksichtigung der elastischen Formänderung in der Plas-tizitätstheorie, Zeit. Angew. Math. und Mech. 10 (1939), 26–274.
158. J.R. Rice, On the structure of stress-strain relations for time-dependent plastic deformation in metals, J. Appl. Mech. 137 (1970), 728–737.
159. R.T. Rockafellar, Convex Analysis, Princeton University Press, Princeton, New Jersey, 1970.
160. F. Roters, P. Eisenlohr, T. R. Bieler, and D. Raabe, Crystal Plasticity Finite Element Methods in Materials Science and Engineering, Wiley-VCH, Wein-heim, 2010.
161. M. Sauter and C. Wieners, On the superlinear convergence in computational elasto-plasticity, Comput. Methods Appl. Mech. Engrg. 200 (2011), 3646–3658.
162. J. Schröder and C. Miehe, Aspects of computational rate-independent crystal plasticity, Comp. Mat. Sci. 9 (1997) 168–176.
163. A. Schröder and S. Wiedemann, Error estimates in elastoplasticity using a mixed method, Appl. Numer. Math. 61 (2011) 1031–1045.
164. U. Stefanelli, A variational principle for hardening elastoplasticity, SIAM J. Math. Anal. 40 (2008) 623–652.
165. C. Schwab, p-and hp-Finite Element Methods, Oxford University Press, 1998.
166. J.C. Simo, Topics on the numerical analysis and simulation of plasticity, in P.G. Ciarlet and J.-L. Lions, eds., Handbook of Numerical Analysis Vol. VI, North-Holland, Amsterdam, 1998, 183–499.
167. J.C. Simo and S. Govindjee, Nonlinear B-stability and symmetry preserving return mapping algorithms for plasticity and viscoplasticity, Int. J. Numer. Meths. Engng. 31 (1991), 151–176.
168. J.C. Simo and T.J.R. Hughes, Computational Inelasticity, Springer-Verlag, New York, 1998.
169. J.C. Simo, J.G. Kennedy, and S. Govindjee, Non-smooth multisurface plasticity and viscoplasticity. Loading/unloading conditions and numerical algorithms, Int. J. Numer. Meths. Engng. 26 (1988), 2161–2185.
170. J.C. Simo and R.L. Taylor, Consistent tangent operators for rate-independent elasto-plasticity, Comp. Meth. Appl. Mech. Engng. 48 (1985), 101–118.
171. M. Sofonea and A. Matei, Variational Inequalities with Applications: A Study of Antiplane Frictional Contact Problems, Springer, New York, 2009.
172. P. Steinmann and E. Stein, On the numerical treatment and analysis of finite deformation ductile single crystal plasticity, Comp. Meth. Appl. Mech. Engng. 129 (1996), 235–254.
173. G. Strang and G. Fix, An Analysis of the Finite Element Method, Prentice-Hall, Englewood Cliffs, NJ, 1973.
174. A.M. Stuart and A.R. Humphries, Model problems in numerical stability theory for initial value problems, SIAM Rev. 36 (1994), 226–257.
175. B. Szabó and I. Babuška, Finite Element Analysis, John Wiley & Sons, Inc., New York, 1991.
176. R. Temam, Mathematical Problems in Plasticity, Gauthier-Villlars, Paris, 1985.
177. R. Temam and G. Strang, Functions of bounded deformation, Arch. Rational Mech. Anal. 75 (1980), 7–21.
178. R. Temam and G. Strang, Duality and relaxation in the variational problems of plasticity, J. Méc. 19 (1980), 493–527.
179. H.E. Tresca, Mémoire sur l’écoulement des corps solids, Mémoire Présentés par Divers Savants, Acad. Sci. Paris 20 (1872), 75–135.
180. R. von Mises, Mechanik der festen Körper im plastisch-deformablen Zustand, Gött. Nach. Math. Phys. Kl. (1913), 582–592.
181. R. von Mises, Mechanik der plastischen Formänderung von Kristallen, ZAMM 8 (1928), 161–185.
182. 2-error estimate for an approximation of the solution of a parabolic variational inequality, Numer. Math. 57 (1990), 453–471.
183. C.C. Wang and C. Truesdell, Introduction to Rational Elasticity, Noordhoff, Leyden, 1973.
184. C. Wieners and B. Wohlmuth, A primal-dual finite element approximation for a nonlocal model in plasticity., SIAM J. Numer. Anal. 49 (2011), 692–710.
185. E. Zeidler, Nonlinear Functional Analysis and its Applications. I: Fixed-point Theorems, Springer-Verlag, New York, 1985.
186. E. Zeidler, Nonlinear Functional Analysis and its Applications. IIA: Linear Monotone Operators, Springer-Verlag, New York, 1990.
187. E. Zeidler, Nonlinear Functional Analysis and its Applications. III: Variational Methods and Optimization, Springer-Verlag, New York, 1986.
188. E. Zeidler, Applied Functional Analysis: Applications of Mathematical Physics, Springer-Verlag, New York, 1995.
189. E. Zeidler, Applied Functional Analysis: Main Principles and Their Applications, Springer-Verlag, New York, 1995.
190. O.C. Zienkiewicz, Origins, milestones and directions of the finite element method—a personal view, in P.G. Ciarlet and J.-L. Lions, eds., Handbook of Numerical Analysis, Vol. IV, North-Holland, Amsterdam, 1996, 3–67.
191. O.C. Zienkiewicz and R.L. Taylor, The Finite Element Method, Vol. I (Basic Formulation and Linear Problems), McGraw-Hill, New York, 1989.
192. O.C. Zienkiewicz and R.L. Taylor, The Finite Element Method, Vol. II (Solid and Fluid Mechanics, Dynamics and Nonlinearity), McGraw-Hill, New York, 1991.
193. M. Życzkowski, Combined Loadings in the Theory of Plasticity, P.W.N. Polish Scientific Publishers, Warsaw, 1981.