The influence of physical input parameter uncertainties on multidimensional model predictions of diesel engine performance and emissions

SAE Technical Papers

Volumn , Issue , 2000, Pages

  Yi, Y ^a   Hessel, R ^a   Zhu, G S ^a   Reitz, R ^a  

^a University of Wisconsin Madison   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FUEL PURIFICATION; MACHINE DESIGN; SPECIFICATIONS; SPRAY NOZZLES;

DIESEL ENGINE PERFORMANCE; ENGINE OPERATING CONDITIONS; EXPERIMENTAL UNCERTAINTY; HEAVY-DUTY DIESEL ENGINE; MULTI-DIMENSIONAL MODEL; OPERATING CONDITION; SINGLE AND DOUBLE INJECTIONS; START OF INJECTIONS;

DIESEL ENGINES;

EID: 85072463552     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2000-01-1178     Document Type: Conference Paper

References (46)

1. Abraham, J., Reitz, R.D., and Bracco, F.V., "Comparisons of Computed and Measured Pre-mixed Charge Engine Combustion," Combustion and Flame, Vol. 60, p. 309, 1985.
2. Amsden, A.A., "KIVA-3: A KIVA Program with Block-Structured Mesh for Complex Geometries," Los Alamos National Labs., LA-12503-MS, 1993.
3. Beale, J.C., and Reitz, R.D., "Modeling Spray Atomization with the Kelvin-Helmholtz/Rayleigh-Taylor Hybrid Model," Accepted, Atomization and Sprays, 1999.
4. Choi, C.Y., and Reitz, R.D., "An Experimental Study on the Effects of Oxygenated Fuel Blends and Multiple Injection Strategies on D.I. Diesel Engine Emissions," FUEL, Vol. 78 /11, pp. 1303-1317, 1999.
5. Choi, C.Y., and Reitz, R.D., "Modeling the Effects of Oxygenated Fuels and Split Injections on DI Diesel Engine Performance and Emissions, Submitted to Combustion Science and Technology, 1999.
6. Gonzalez D., M.A., Borman, G.L., and Reitz, R.D., "A Study of Diesel Cold Starting using both Cycle Analysis and Multidimensional Calculations," SAE Paper 910180, 1991.
7. Halstead, M., Kirsh, L., and Quinn, C., "The Autoignition of Hydrocarbon Fuels at High Temperatures and Pressures-Fitting of a Mathematical Model," Combustion and Flame, Vol. 30, 1977.
8. Han, Z., and Reitz, R. D., 1995, "Turbulent Modeling of Internal Combustion Engines Using RNG k-e Models" Combustion Science and Technology, Vol. 106, pp. 267-280
9. Han, Z., and Reitz, R.D., "A Temperature Wall Function Formulation for Variable Density Turbulent Flows with Application to Engine Convective Heat Transfer Modeling," International Journal of Heat and Mass Transfer, Vol. 40, No. 3, pp. 613-625, 1997.
10. Han, Z., Uludogan, A., Hampson, G., and Reitz, R.D., "Mechanisms of Soot and NOx Emission Reduction Using Multiple-Injection in a Diesel Engine," SAE Paper 960633, 1996.
11. Hessel, R. P., and Rutland, C. J., "Intake Flow Modeling in a Four-Stroke Diesel Using KIVA-3" Journal of Propulsion and Power, Vol. 11, pp. 378-384, 1995.
12. Hiroyasu, H., and Nishida, K., "Simplified Three-Dimensional Modeling of Mixture Formation and Combustion in a D.I. Diesel Engine," SAE Paper 890269, 1989.
13. Hiroyasu, H., Arai, M., and Shimizu, M., Proceeding of ICLASS-91, Paper 26, Gaithersburg, Maryland, July 1991.
14. Kong, S.-C., Han, Z., and Reitz, R.D., "The Development and Application of a Diesel Ignition and Combustion Model for Multidimensional Engine Simulations," SAE Paper 950278, SAE Transactions, Vol. 104, Section 3, Journal of Engines, pp. 502-518, 1995.
15. Kong, S.-c., and Reitz, R.D., "Multidimensional Modeling of Diesel Ignition and Combustion Using A Multistep Kinetics Models," Paper 93-ICE-22, ASME Transactions, Journal of Engineering for Gas Turbines and Power, Vol. 115, No. 4, pp. 781-789, 1993.
16. Krieger, R.B., and Borman, G.L., "The Computation of Apparent Heat Release for Internal Combustion Engines," ASME Paper 99-WA/DGP-4, 1966.
17. Levich, V. G., Physicochemical Hydrodynamics, Prentice-Hall Inc., New Jersey, 1962.
18. Liu, A.B., Mather, D., and Reitz, R.D., "Effects of Drop Drag and Breakup on Fuel Sprays" SAE Paper 930072, SAE Transactions, Vol. 102, Section 3, Journal of Engines, pp. 63-95, 1993.
19. Liu, Y., and Reitz, R.D., "Modeling of Heat Conduction Within Chamber Walls for Multidimensional Internal Combustion Engine Simulations," International Journal of Heat and Mass Transfer, Vol. 41, pp. 859-869, 1998.
20. Mather, D., and Reitz, R. D., 1998, "Modeling the influence of fuel injection parameters on diesel engine emissions" SAE Technical Paper No. 980789
21. Miller, J.A., and Bowman, C.T., "Mechanism and Modeling of Nitrogen Chemistry in Combustion," Prog. Energy Comb. Sci., Vol. 15, pp. 287-338, 1989.
22. Miyaki, M., Fujisawa, H., Masuda, A., and Yamoamoto, Y., "Development of New Electronically Controlled Fuel Injection System ECD-U2 for Diesel Engines," SAE Paper 910252, 1991.
23. Montgomery, D.T., and Reitz, R.D., "Six-mode Cycle Evaluation of the Effect of EGR and Multiple Injections on Particulate and NOx Emissions from a D.I. Diesel Engine," SAE Paper 960316, 1996.
24. Montgomery, D.T., Chan, M., Chang, C.T., Farrell, P.V., and Reitz, R.D., "Effect of Injector Nozzle Hole Size and Number on Spray Characteristics and the Performance of a Heavy Duty D.I. Deisel Engine," SAE Paper 962002, 1996.
25. Naber, J.D., and Reitz, R.D., "Modeling Engine Spray/Wall Impingement," SAE Paper 880107, 1988.
26. Nagle, J., Strickland-Constable, R.F., "Oxidation of Carbon between 1000-2000 C," Proc. of the Fifth Carbon Conf., Vol. 1, Pergammon Press, p. 154, 1962.
27. Nehmer, D.A., and Reitz, R.D., "Measurement of the Effect of Injection Rate and Split Injections on Diesel Engine Soot and NOx Emissions," SAE Paper 940668, SAE Transactions, Vol. 103, Section 3, Journal of Engines, pp. 1030-1043, 1994.
28. Newkirk, M.S., "Application of Methods for Determining Total Organic Contribution to Diesel Particulates," ASME Paper 92-ICE-16, 1992.
29. O'Rourke, P.J., and Bracco, F.V., "Modeling Drop Interactions in Thick Sprays and a Comparison with Experiments," Stratified Charge Automotive Engines, I. Mech. E. Conference Publications 1980-9, pp. 101-116, 1980.
30. O'Rourke, P.J., and Amsden, A.A., "The TAB Method for Numerical Calculation of Spray Droplet Breakup," SAE Paper 872089, 1987.
31. Patterson, M. A., Kong, S.-C., Hampson, G. J., and Reitz, R.D., "Modeling the Effects of Fuel Injection Characteristics on Diesel Engine Soot and NOx Emissions," SAE Paper 940523, 1994.
32. Patterson, M.A., and Reitz, R.D., "Modeling the Effects of Fuel Spray Characteristics on Diesel Engine Combustion and Emissions," SAE Paper 980131, 1998.
33. Reitz, R.D., "Modeling Atomization Processes in High-Pressure Vaporizing Sprays," Atomisation and Spray Technology, Vol. 3, pp. 309-337, 1987.
34. Reitz, R.D., and Bracco, F.V., "Global Kinetics and Lack of Thermodynamic Equilibrium," Combustion and Flame, Vol. 53, p. 141, 1983.
35. Reitz, R.D., and Diwakar, R., "Structure of High-Pressure Fuel Sprays," SAE Paper 870598, SAE Transactions Vol. 96, Sect. 5, pp. 492-509, 1987.
36. Reitz, R.D., and Rutland, C.J., "Development and Testing of Diesel Engine CFD Models," Progress in Energy and Combustion Science, Vol. 21, pp. 173-196, 1995.
37. Reitz, R. D., "The Use of Multiple Injections and EGR for Emissions Control in D.I. Diesel Engines"
38. Ricart, L. M., and Reitz, R. D., "Visualization and Modeling of Pilot Injection and Combustion in Diesel Engines" SAE Paper 960833, 1996
39. Ricart, L.M., Xin, J., Bower, G.R., and Reitz, R.D., "In-Cylinder Measurement and Modeling of Liquid Fuel Spray Penetration in a Heavy-Duty Diesel Engine," SAE Paper 970591, SAE Transactions, Vol. 106, Section 3, Journal of Engines, pp. 1622-1640, 1997.
40. Rutland, C. J., Eckhause, J., Hampson, G., Hessel, R., Kong, S., Patterson, M., Pierpont, D., Sweetland, P., Tow, T., Reitz, R. D., 1994, "Toward Predictive Modeling of Diesel Engine Intake Flow, Combustion and Emissions" SAE Technical Paper No. 941897
41. Senecal, P.K., Xin, J., and Reitz, R.D., "Pedictions of Residual Gas Fraction in IC Engines," SAE Paper 962052, SAE Transactions, Vol. 105, Section 3, Journal of Engines, pp. 2243-2254, 1996.
42. Tow, T., Pierpont, A., and Reitz, R.D., "Reducing Particulates and NOx Emissions by Using Multiple Injections in a Heavy Duty D.I. Diesel Engine," SAE Paper 940897, 1994.
43. Von Kuensberg Sarre, C., Kong, S.-C., and Reitz, R.D., "Modeling the Effects of Injector Nozzle Geometry on Diesel Sprays," SAE Paper 1999-01-0912, 1999.
44. Wickman, D., Tanin, K., Senecal, P., Reitz, R., Gebert, K., Barkhimer, R., Beck, N., SAE Paper 2000-01-0947, 2000
45. Xin, J., Montgomery, D., Han, Z., and Reitz, R.D., "Modeling Diesel Engine NOx and Particulate over a Six-Mode Emissions Cycle," ASME Journal of Gas Turbines and Power, Vol. 119, pp. 683-691, 1997.
46. Zhu, Y., and Reitz, R.D., "A 1-D Gas Dynamics Code for Subsonic and Supersonic Flows Applied to Predict EGR Levels in a Heavy-Duty Diesel Engine," International Journal of Vehicle Design, Vol. 22, pp. 227-252, 1999.