The effects of injector targeting and fuel volatility on fuel dynamics in a PFI engine during warm-up: Part II-modeling results

SAE Technical Papers

Volumn , Issue , 1998, Pages

  Curtis, Eric ^a   Russ, Stephen ^a   Aquino, Charles ^a   Lavoie, George ^a   Trigui, Nizar ^a  

^a FORD MOTOR COMPANY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

INTAKE VALVES; LIQUID FUELS; VAPORIZATION;

AIR FUEL RATIOS; COMPONENT TEMPERATURES; CONVECTIVE VAPORIZATION; CYLINDER TEMPERATURES; FUEL PREPARATION; MULTICOMPONENT FUEL; PHYSICAL PROCESS; QUASI-DIMENSIONAL MODEL;

DIRECT INJECTION;

EID: 85072458153     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/982519     Document Type: Conference Paper

References (30)

1. Russ, S., Stevens, J., Aquino, C., Curtis, E., and Fry, J., "The Effects of Injector Targeting and Fuel Volatility on Fuel Dynamics in A PFI Engine During Warm-up: Part I-Experimental Results" SAE Paper No. 982518, 1998.
2. Curtis E. W., Aquino, C. F., Trumpy, D. K., and Davis, G. C., "A New Port and Cylinder Wall Wetting Model To Predict Transient Air/Fuel Excursions in a Port Fuel Injected Engine" SAE Paper No. 961186, 1996.
3. Curtis, E. W., Aquino C. F., Plensdorf, W. D., Trumpy, D. K., Davis, G. C., and Lavoie, G. A., "Modeling Intake Valve Warm-up" Paper No. 97-ICE-40, ICE-Vol. 29-1, 1997 Fall Technical Conference, ASME 1997.
4. Lefebvre, Arthur H., "Atomization and Sprays" Hemisphere Publishing Corporation, 1989.
5. Servati, H. B., and Herman, E. W., "Spray/Wall Interactions Simulation" SAE Paper No. 890566.
6. Brown, C., and Ladommatos, N., "A Numerical Study of Fuel Evaporation and Transportation in the Intake Manifold of a Port-Injected Spark-Ignition Engine" Proc. Instn Mech. Engrs, 1991, Vol. 205 No D3, 161-175.
7. Fozo, S. R., and Aquino, C.F., "Transient A/F Characteristics for Cold Operation of a 1.6 Liter Engine with Sequential Fuel Injection" SAE 880691.
8. Shayler, P. J., Davies, M. T., Colechin, M. J. F., and Scarsbrick, A., "Intake Port Fuel Transport and Emissions: The Influence of Injector Type and Fuel Composition" SAE 961996.
9. Shin, Younggy, Liquid Fuel Behavior in the Mixture Preparation Process During Starting and Warm-up in a Spark Ignition Engine, Ph.D. Thesis, MIT, 1996, Department of Mechanical Engineering.
10. Witze, Peter O., and Green, Robert M., "LIF and Flame Imaging of Liquid Fuel Films and Pool Fires in an SI Engine During a Simulated Cold Start" SAE 970866.
11. Kelly-Zion, P. L., Styron, J. P., Lee, C-F., Lucht, R. P., Peters, J. E., and White, R. A., "In-Cylinder Measurements of Liquid Fuel During the Intake Stroke of a Port-Injected Spark Ignition Engine" SAE 972945.
12. Saito, K., Sekiguchi, K., Imatake, N., Takeda, K., and Yaegashi, T., "A New Method to Analyze Fuel Behavior in a Spark Ignition Engine" SAE 950044.
13. Takeda, K., Yaegashi, T., Sekiguchi, K., Saito, K., and Imatake, N., "Mixture Preparation and HC Emissions of a 4-Valve Engine with Port Fuel Injection During Cold Start and Warm-up" SAE 950074.
14. Iwano, H., Jaitoh, M., Sawamoto, K., and Nagaishi, H., "An Analysis of Induction Port Fuel Behavior" SAE 912348.
15. Chen, G., and Aggarwal, S., "Multiphase Flow in the Intake Port" SAE 960074.
16. Chen, K. C., Dewitt, K., and Cheng, W. K., "A Species Based Multi-Component Volatility Model for Gasoline" SAE 941877
17. Alkidas, A. C., and Drews, R. J., "Effects of Mixture Preparation on HC Emissions of a S. I. Engine Operating Under Steady-State Cold Conditions" SAE 961958
18. Kaiser, E. W., Siegl, W. O., Lawson, G. P., Conolly, F. T., Cramer, C. F., Dobbins, K. L., Roth, P. W., and Smokovitz, M., "Effect of Fuel Preparation on Cold-Start Hydrocarbon Emissions from a Spark-Ignited Engine" SAE 961957.
19. Russ, S. G., Kaiser, E. W., Siegl, W. O., Podsiadlik, D. H., and Barret, K. M., "Compression Ratio and Coolant Temperature Effects on HC Emissions from a Spark-Ignition Engine" SAE 950163.
20. Lippert, Andreas M., and Reitz, Rolf D., "Modeling of Multi-component Fuels Using Continuous Distributions with Applications to Droplet Evaporation and Sprays" SAE 972882.
21. Greenfield, M. L., Lavoie, G. A., Smith, C. S., and Curtis, E. W., "Macroscopic Model of the D86 Fuel Volatility Procedure" SAE Paper No. 982724, 1998.
22. Skippon, S. M., Nattrass, S. R., Kitching, J. S., Hardiman, L., and Miller, H., "Effects of Fuel Composition on In-Cylinder Air/Fuel Ratio During Fueling Transients in an SI Engine, Measured Using Differential Infra-Red Absorption" SAE 961204
23. Quader, A., Sloane, T., Sinkevitch, R., and Olson, K., "Why Gasoline 90% Distillation Temperature Affects Emissions with PFI and Premixed Charge" SAE 912430.
24. Bossert, J. C., Shin, Y., and Cheng, W. K., "Fuel Effects on Throttle Transients in PFI Spark Ignition Engines" SAE 971613.
25. Aquino, C., Plensdorf, W., Lavoie, G., and Curtis, E., "The Occurrence of Flash Boiling in a Port Injected Gasoline Engine" SAE Paper No. 982522, 1998.
26. Senda, J., Nishikori, T., Tsukamoto, T., and Fujimoto, H., "Atomization of Spray under Low-Pressure Field from Pintle Type Gasoline Injector" SAE Paper No. 920382, 1992.
27. Senda, J., Hojyo, Y., and Fujimoto, H., "Modeling of Atomization Process in Flash Boiling Spray" SAE Paper No. 941925, 1994.
28. Kramer, H., Munch, K-U., and Leipertz, A., "Comparison of Two Injectors by LIF with Respect to Mixture Formation and Combustion Inside the Cylinder of a Transparent SI Engine" SAE 972946.
29. Spalding, D. B., Combustion and Mass Transfer, Pergamon Press, 1979.
30. Benninger, N. F., and Plapp, G., Requirements and Performance of Engine Management Systems Under Transient Conditions" SAE 910083.