Pressure-swirl atomizers for DISI engines: Further modeling and experiments

SAE Technical Papers

Volumn , Issue , 2000, Pages

  Arcoumanis, C ^a   Gavaises, M ^a  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

ATMOSPHERIC MOVEMENTS; ATMOSPHERIC STRUCTURE; ATOMIZATION; ATOMIZERS; CCD CAMERAS; COMPUTATIONAL FLUID DYNAMICS; ENGINES; FUEL INJECTION; FUELS; LIQUEFIED GASES; LIQUID FILMS; NOZZLES; PHASE INTERFACES;

ATMOSPHERIC BACK PRESSURE; FUEL INJECTION RATE; FUEL INJECTION SYSTEMS; GEOMETRIC CHARACTERISTICS; LIQUID GAS INTERFACE; PRESSURE SWIRL ATOMIZERS; TEMPORAL DEVELOPMENT; TRANSIENT FORMATION;

TWO PHASE FLOW;

EID: 85072456012     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2000-01-1044     Document Type: Conference Paper

References (50)

1. Harada J., Tomita T., Mizuno H., Mashiki Z., and Ito Y., "Development of direct injection gasoline engine" SAE Paper 970540, 1997
2. Iwamoto Y., Noma K., Nakayama O., Yamauchi T., and Ando H., "Development of direct injection gasoline engine" SAE Paper 970541, 1997
3. Tomoda T., Sasaki S., Sawada D., Saito A., and Sami H., "Development of direct injection gasoline engine-study of stratified mixture formation" SAE Paper 970539, 1997
4. Kume T., Iwamoto Y., Iida K., Murakami M., Akishino K., and Ando H., "Combustion control technologies for direct injection SI engine" SAE Paper 960600, 1996
5. Ando H., "Mitsubishi GDI engine-Strategies to meet European requirements" AVL Conference, 4-5 September, 1997
6. Ando H., "Combustion control technologies for gasoline engines" IMechE Intl. Seminar on Lean Burn Engines, 3-4 December, 1996
7. Zhao F-Q, Lai M-C, and Harrington D.L, "A review of mixture preparation and combustion control strategies for spark-ignited direct-injection gasoline engines" SAE Paper 970627, 1997
8. Arcoumanis C., "Research issues in passenger car engines" The 4th Int. Symp. On Diagnostics and Modeling of Combustion in Internal Combustion Engines, COMODIA 98, July 20-23, Kyoto, Japan, 1998
9. Lake T.H., Sapsford S.M., Stokes J., and Jackon N.S., "Simulation and development experience of a stratified charge gasoline direct-injection engine" SAE Paper 962014, 1996
10. Jackson N.S., Stokes J., Whitaker P.A., and Lake T.H., "A direct injection stratified charge gasoline combustion system for future european passenger cars" IMechE Intl. Seminar on Lean Burn Engines, 3-4 December, 1996
11. Wirth M., Piock W.F., and Fraidl G.K., "Actual trends and future strategies for gasoline direct injection" IMechE Intl. Seminar on Lean Burn Engines, 3-4 December, 1996
12. Wirth M., Piock W.F., Fraidl G.K., Schoeggl P., and Winklhofer E., "Gasoline DI engines: The complete system approach by interaction of advanced development tools" SAE Paper 980492, 1998
13. Whitaker P.A., Stokes J., and Lake T.H., "Comparison of top-entry and side-entry direct injection gasoline combustion systems" Paper presented at IMechE Intl. Conference on Combustion Engines and Hybrid Vehicles, 28-30 April, 1998
14. Fraidl G., Piock W.F., and Wirth M., "The potential of direct injection gasoline engine" Paper presented at the 18th Intl. Vienna Motor Symposium, 24-25 April, 1997
15. Lai M-C., Zhao F-Q., Amer A.A., and Chue T-H., "An experimental and analytical investigation of the spray structure from automotive port injectors" SAE Paper 941873, 1994
16. Zhao F-Q, Lai M-C, and Harrington D.L., "The spray characteristics of automotive port fuel injection-A critical review" SAE Paper 950506, 1995
17. Meyer J., Kiefer K., von Issendorff F., Thiemann J., Haug M., Schreiber M., and Klein R., "Spray visualization of air-assisted fuel injection nozzles for direct injection SI engines" SAE Paper 970623, 1997
18. Miok J., Huh K.Y., Noh S.H., and Choi K.H., "Numerical prediction of charge distribution in a lean burn direct-injection spark ignition engine" SAE Paper 970626, 1997
19. Parrish S.E., and Farrell P.V., "Transient spray characteristics of a direct-injection spark-ignited fuel injector" SAE Paper 970629, 1997
20. Hoffman J.A., Eberhardt E., and Martin J.K., "Comparison between air-assisted and single-fluid pressure atomizers for direct-injection SI engines via spatial and temporal mass flux measurements" SAE Paper 970630, 1997
21. Han Z., Reitz R.D., Yang J., and Anderson R.W., "Effects of injection timing on air-fuel mixing in a direct-injection spark-ignition engine" SAE Paper 970625, 1997
22. Stanglmaier R.H., Hall M.J., and Matthews R.D., "Fuel-spray/charge- motion interaction within the cylinder of a direct-injected 4-valve SI engine" SAE 980155, 1998
23. Shin Y., Cheng W.K., and Heywood J.B., "Liquid gasoline behavior in the engine cylinder of a SI engine" SAE Paper 941872, 1994
24. Papageorgakis G., and Assanis D.N., "Optimizing gaseous fuel-air mixing in direct injection engines using an RNG based k-ε model" SAE Paper 980135, 1998
25. Shelby M., VanDerWege B.A., and Hochgreb S., "Early spray development in gasoline direct-injected spark ignition engines" SAE Paper 980160, 1998
26. Kano M., Saito K., Basaki M., Matsushita S., and Gohno T., "Analysis of mixture formation of direct injection gasoline engine" SAE Paper 980157, 1998
27. th Annual Conference on Liquid Atomization and Spray Systems (ILASS-Europe), 5-7 July, 1999, Toulouse, France
28. Ren W.M., Shen J., and Nally Jr., "Geometrical effects, flow characteristics of a gasoline high pressure swirl injector" SAE Paper 971641, 1997
29. Cousin J., Ren W.M., and Nally S., "Transient flows in high pressure swirl injectors" SAE Paper 980499, 1998
30. th Annual Conference on Liquid Atomization and Spray Systems (ILASS-Europe), 5-7 July, 1999, Toulouse, France
31. Arcoumanis C., Kashdan J.T., Shrimpton J., Gaade J.E., and Wallace S., "Spray characteristics of swirl pressure atomisers for direct-injection gasoline engines" Paper to be presented in IMechE International Conference on Fuel Injection Systems, London, 1-2 December, 1999
32. Arcoumanis C., Gavaises M., Argueyrolles B., and Galzin F., "Modelling of pressure-swirl atomizers for GDI engines" SAE Paper 1999-01-0500, 1999
33. Chaves H., and Obermeier F., "Modelling the effect of modulations of the injection velocity on the structure of diesel sprays" SAE Paper 961126, 1996
34. Han Z., Fan Li, and Reitz D., "Multidimensional modelling of spray atomization and air-fuel mixing in a direct-injection spark-ignition engine" SAE Paper 970884, 1997
35. Yamauchi, and Wakisaka, "Computation of the hollow-cone sprays from a high pressure injector for a gasoline direct-injection SI engine" SAE Paper 962016, 1996
36. Lee, and Bracco, "Initial comparison of computed and measured hollow-cone sprays in an engine" SAE Paper 940398, 1994
37. Lee, and Bracco F.V., "Comparisons of computed and measured hollow-cone sprays in an engine" SAE Paper 950284, 1995
38. Gavaises M., and Theodorakakos A., "Development of a 3-D flow model for prediction of two-phase flows with sharp interfaces" in preparation
39. Gavaises M., 'Modeling of diesel fuel injection processes' Ph.D. Thesis, Imperial College, University of London, 1997
40. Preussner C., Doring C., Fehler S., and Kampmann S., "GDI: Interaction between mixture preparation, combustion system and injector performance" SAE Paper 980498, 1998
41. Xu M., and Markle L.E., "CFD-aided development of spray for an outwardly opening direct injection gasoline injector" SAE Paper 980493, 1998
42. Dumouchel C., Bloor M.I.G., Dombrowski N., Ingham D.B., and Ledoux M., "Viscous flow in a swirl atomizer" Chemical Eng. Sci., Vol. 48, No. 1, pp. 81-87, 1993
43. Chinn, and Yule A., "Computational analysis of swirl atomizer internal flow' ICLASS-97, Seoul, pp. 868-875, 1997
44. Cousin J., Ren W.M., and Nally S., "Recent developments in simulations of internal flows in high pressure swirl injectors" Oil & Gas Science and Technology-Rev. IFP, Vol. 54, No. 2, pp. 227-231, 1999.
45. Theodorakakos A., 'Numerical simulation of the flow in IC engines' Ph.D. Thesis, National Technical University of Athens, 1997
46. Ubbink O., "Numerical prediction of two fluid systems with sharp interfaces" Ph.D. Thesis, Imperial College, University of London, 1997
47. Glekas J.P., and Bergeles G., "A numerical method for recirculating flows on generalised coordinates: Application to environmental flows" Appl. Math. Modelling, vol. 17, p. 605, 1993
48. Demerdzic I., And, Peric M., "Finite volume method for prediction of fluid flow in arbitrary shaped domains with moving boundaries" Int. J. Numer. Meth. Fluids, vol. 10, p. 771, 1990
49. Arcoumanis C., Kashdan J.T., Shrimpton J.S., Gaade J.E., and Wallace S., "Spray characteristics of swirl pressure atomisers for direct-injection gasoline engines" pp. 13-23, S492/S1/99, IMechE Seminar on Fuel Injection Systems, 1-2 December 1999, London, UK
50. Gold M.R., Sadler M., Stokes J., Bowen P.J., and Comer M.A., "Spray characterisation tools techniques for G-DI engine development" pp. 105-120, S492/S8/99, IMechE Seminar on Fuel Injection Systems, 1-2 December 1999, London, UK