Early spray development in gasoline direct-injected spark ignition engines

SAE Technical Papers

Volumn , Issue , 1998, Pages

  Shelby, Michael H ^a   Vanderwege, Brad A ^a   Hochgreb, Simone ^a  

^a MASSACHUSETTS INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMBUSTION CHAMBERS; COMPUTER AIDED DESIGN; ENGINES; GASOLINE; JETS;

AMBIENT PRESSURES; COMBUSTION SYSTEMS; COMPUTATIONAL RESULTS; DIRECT INJECTION GASOLINE ENGINE; FUEL DISTRIBUTION; PLANAR LASER INDUCED FLUORESCENCE; PRESSURE SWIRL ATOMIZERS; TANGENTIAL VELOCITIES;

DIRECT INJECTION;

EID: 85072472233     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/980160     Document Type: Conference Paper

References (37)

1. Fraidl, G., Piock, W., Wirth, M., "Gasoline Direct Injection: Actual Trends and Future Strategies for Injection and Combustion Systems." SAE Paper No. 960465 (1996)
2. Harada, J., Tomita, T., Mizuno, H., Mashiki, Z., and Ito, Y., "Development of Direct Injection Gasoline Engine." SAE Paper No. 970540 (1997)
3. Iwamoto, Y., Noma, K., nakayama, O., Yamauchi, T., and Ando, H., "Development of Gasoline Direct Injection Engine." SAE Paper No. 970541 (1997)
4. Anderson, R., Yang, J., Brehob, D. D., Vallance, J. K., and Whiteaker, R. M., "Understanding the Thermodynamics of Direct Injection Spark Ignition (DISI) Combustion Systems: An Analytical and Experimental Investigation." SAE Paper No. 962018 (1996)
5. Han, Z., Reitz, R., Yang, J., Anderson, R., "Effects of Injection Timing on Air-Fuel Mixing in a Direct-Injection Spark- Ignition Engine." SAE Paper No. 970625 (1997)
6. Lake, T., Sapsford, S., Stokes, J., Jackson, N., "Simulation and Development Experience of a Stratified Charge Gasoline Direct Injection Engine." SAE Paper No. 962014 (1996)
7. Tomoda, T., Sasaki, S., Sawada, D., Saito, A., and Sami, H., "Development of Direct Injection Gasoline Engine-Study of Stratified Mixture Formation." SAE Paper No. 970539 (1997).
8. Parrish, S., and Farrell, P., "Transient Spray Characteristics of a Direct-Injection Spark-Ignited Fuel Injector." SAE Paper No. 970629 (1997)
9. Braeumer, A., Sick, V., Wolfrum, J., Drewes, V., Zahn, M., Maly, R., "Quantitative Two-Dimensional Measurements of Nitric Oxide and Temperature Distributions in a Transparent Square Piston SI Engine." SAE Paper No. 952462 (1995)
10. Itoh, T., Kakuko, A., Hinushima, H., Urushiahara, T., Takagi, Y., Horie, K., Asano, M., Ogata, E., Yamasita, T., "Development of a New Compound Fuel and Fluorescent Tracer Combination for Use with Laser Induced Fluorescence." SAE Paper No. 952465 (1995)
11. Lawrenz, W., Koehler, J., Meier, F., Stoltz, W., Wirth, R., Bloss, W. H., Maly, R. R., Wagner, E., and Zahn, M., "Quantitative 2D LIF Measurements of Air/Fuel Ratios During the Intake Stroke in a Transparent SI Engine." SAE Paper No. 922320 (1992)
12. Reboux, J., and Puechberty, D., "A New Approach of Planner Laser Induced Fluorescence Applied to Fuel/Air Ratio Measurement in the Compression Stroke of an Optical S.I. Engine." SAE Paper No. 941988 (1994)
13. Crosley, D., and Smith, G., "Laser-Induced Fluorescence Spectroscopy For Combustion Diagnostics." Opt. Eng., Vol. 22 No. 5, 545 (1983)
14. Hansen, D., and Lee, E., "Radiative And Nonradiative Transitions In The First Excited Singlet State Of Symmetrical Methyl-Substituted Acetones." J. Chem. Phys., Vol. 62, No. 1, 183 (1975)
15. Muench, K., Kraemer, H., and Leipertz, A., "Investigation of Fuel Evaporation Inside the Intake of a SI Engine Using Laser Induced Expiplex-Fluorescence with a New Seed." SAE Paper No. 961930 (1996)
16. Drake, M., Fansler, T., and French, D., "Crevice Flow and Combustion Visualization in a Direct-Injection Spark-Ignition Engine Using Laser Imaging Techniques." SAE Paper No. 952454 (1995)
17. Swindal, J., Dragonetti, D., Hahn, R., Furman, P., Acker, W., "In-Cylinder Charge Homogeneity During Cold-Start: Studied with Fluorescent Tracers Simulating Different Fuel Distillation Temperatures." SAE Paper No. 950106 (1995)
18. Smith, B., and Srivastava, R., Thermodynamic Data for Pure Compounds, Part A, Hydrocarbons and Ketones. Amsterdam; Elsevier, 1986
19. Yuen, L., Peters, J., and Lucht, R., "Pressure Dependence of Laser-Induced Fluorescence from Acetone." Combustion Institute Meeting, Central States Section, May 1996
20. Dodge, L., "Fuel Preparation Requirements for Direct Injected Spark-Ignition Engines." SAE Paper No. 962015 (1996)
21. Lefebvre, A., Atomization and Sprays. New York; Hemisphere Publishing Inc., 1989
22. Zhao, F., Yoo, J., and Lai, M., "Spray Dynamics of High Pressure Fuel Injectors for DI Gasoline Engines." SAE Paper No. 961925 (1996)
23. Yamauchi, T., Wakisaka, T., "Computation of the Hollow-Cone Sprays from a High-Pressure Swirl Injector for a Gasoline Direct-Injected SI Engine" SAE Paper No. 962016 (1996)
24. Johansson, B., Neij, H., Juhlin, G., and Aldén, M., "Residual Gas Visualization with Laser Induced Fluorescence" SAE Paper No. 952463 (1995)
25. Green, R., and Cloutman, D., "Planar LIF Observations of Unburned Fuel Escaping the Upper Ring-Land Crevice in an SI Engine." SAE Paper No. 970823 (1997)
26. Zhao, F., Lai, M., and Harrington, D., "A Review of Mixture Preparation and Combustion Control Strategies for Spark-Ignited Direct-Injection Gasoline Engines." SAE Paper No. 970627 (1997)
27. Han, Z., Fan, L., and Reitz, R. D., "Modeling the Effects of Intake Flow Structures on Fuel/Air Mixing in a Direct-Injected Spark-Ignition Engine." SAE Paper No. 961192 (1996)
28. Salters, D., Williams, P., Greig, A., and Brehob, D., "Fuel Spray Characterization within an Optically Accessed Gasoline Direct Injection Engine Using a CCD Imaging System." SAE Paper No. 961149 (1996)
29. Jackson, N., Stokes, J., Whitaker, P., and Lake, T., "Stratified and Homogeneous Charge Operation for the Direct Injection Gasoline Engine-High Power with Low Fuel Consumption and Emissions." SAE Paper No. 970543 (1997)
30. Kume, T., Iwamoto, Y., Yida, K., Murakami, M., Akishino, K., and Ando, H., "Combustion Control Technologies for Direct Injection SI Engine." SAE Paper No. 960600 (1996)
31. Yamauchi, T., and Wakisaka, T., "Computation of the Hollow-Cone Sprays from a High-Pressure Swirl Injector for a Gasoline Direct-Injection SI Engine." SAE Paper No. 962016 (1996)
32. Pontoppidan, M., Gaviani, G., Bella, G., and Rocco, V., "Direct Fuel Injection-A Study of Injector Requirements for Different Mixture Preparation Concepts." SAE Paper No. 970628 (1997)
33. Karl, G., Kemmler, R., Bargende, M., and Abthoff, J., "Analysis of a Direct Injected Gasoline Engine." SAE Paper No. 970624 (1997)
34. Ohsuga, M., Shiraishi, T., Nogi, T., Nakayama, Y., and Sukegawa, Y., "Mixture Preparation for Direct-Injection SI Engines." SAE Paper No. 970542 (1997)
35. Melton, L. A., "Quantitative Use of Exciplex-Based Vapor/liquid Visualization in Fuel Sprays, Twentieth Symposium (Int'l) on Combustion, pp. 1283-1290, The Combustion Institute, 1994
36. Bardsley, M. E. A., Felton, P. G., and Bracco, F. V., "2D Visualization of Liquid and Vapor Fuel in an IC Engine" SAE Paper No. 880521 (1988)
37. Takeshita, S., Zexel Inc., personal communication.