Development of a two-zone HCCI combustion model accounting for boundary layer effects

SAE Technical Papers

Volumn , Issue , 2001, Pages

  Fiveland, Scott B ^a   Assanis, Dennis N ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BOUNDARY LAYER FLOW; FUELS; HEAT TRANSFER; IGNITION;

BOUNDARY LAYER EFFECTS; BOUNDARY LAYER THICKNESS; ENGINE PERFORMANCE; EXHAUST POLLUTANTS; HEAT TRANSFER PROCESS; HOMOGENEOUS CHARGE COMPRESSION IGNITION COMBUSTIONS; THERMAL EFFICIENCY; THERMODYNAMIC STATE;

BOUNDARY LAYERS;

EID: 85072451920     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2001-01-1028     Document Type: Conference Paper

References (49)

1. Onishi, S., Hong S. J., Shoda K., Do Jo P., and Kato S., 1979, "Active Thermo Atmospheric Combustion (ATAC)-A New Combustion Process for Internal Combustion Engines," SAE Paper 790501, 1979.
2. Najt, P.M., and Foster D.E., "Compression-Ignited Homogeneous Charge Combustion," SAE Paper 830264, 1983.
3. Thring, R.H., "Homogeneous Charge Compression Ignition (HCCI) Engines," SAE Paper 892068, 1989.
4. Smith, J.R., Aceves S.M., Westbrook C., and Pitz W., "Modeling of Homogeneous Charge Compression Ignition (HCCI) of Methane," Proceedings of the 1997 ASME Internal Combustion Engine Fall Technical Conference, ASME Paper No. 97-ICE-68, ICE-VOL. 29-3, pp. 85-90, 1997.
5. Christensen, M., Johansson, B., Amneus, P., and Mauss, F., "Supercharged Homogeneous Charge Compression Ignition," SAE Paper 980787, 1998.
6. Aceves, S.M., Smith, J.R., Westbrook, C.K., Pitz, W.J., "Compression Ratio Effect on Methane HCCI Combustion," Journal of Engineering for Gas Turbines and Power, Vol. 121, pp. 569-574, 1999.
7. Fiveland S.B., and Assanis D.N., "A Four-Stroke Homogeneous Charge Compression Ignition Engine Simulation for Combustion and Performance Studies," SAE Paper 2000-01-0332, 2000.
8. Fiveland, S.B., and Assanis, D.N., "On Modeling of the Four-Stroke Homogeneous Charge Compression Ignition Engine" HAMEE, 2000.
9. Ryan, T.W., and Callahan T., "Homogeneous Charge Compression Ignition of Diesel Fuel," SAE Paper 961160, 1996.
10. Amneus, P., Nilsson, D., Christensen, M., and Johansson, B., "Homogeneous Charge Compression Ignition Engine: Experiments and Detailed Kinetic Calculations," The Fourth Symposium on Diagnostics and Modeling of Combustion in Internal Combustion Engines, Comodia 98, pp. 567-572, 1998.
11. Flowers, D., Aceves, S., Westbrook, C.K., Smith, J.R., and Dibble, R., "Sensitivity of Natural Gas HCCI Combustion to Fuel and Operating Parameters Using Detailed Kinetic Modeling," UCRL-JC-135058.
12. Aceves S.M., Flowers, D.L., Westbrook, C.K., Smith, R.J., Pitz, W., Christensen, M., and Johansson, B., "A Multi-Zone Model for Prediction of HCCI Combustion and Emissions," SAE Paper 2000-01-0327, 2000.
13. th Internal Combustion Engine Symposium (International), Seoul, Korea, 1999.
14. Van Blarigan, P., and Goldsborough S., "A Numerical Study of a Free Piston Engine Operating on Homogeneous Charge Compression Ignition Combustion," SAE Paper 990619, 1999.
15. Hiltner, J., Agama, R., Mauss, F., Johansson, B., Christensen, M., HCCI Operation with Natural Gas: Fuel Composition Implications, ICE-ASME 2000 Fall Technical Conference, Vol., 35-2, Paper 2000-ICE-317, pp. 11-19.
16. Woschni, G., "A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine," SAE Paper 670931, 1967.
17. Poulos, S.G., and Heywood J.B., "The Effect of Chamber Geometry on Spark-Ignition Engine Combustion" SAE Paper 830334, SAE Trans., Vol. 92, 1983.
18. Assanis, D. N., and Heywood, J. B., "Development and Use of Computer Simulation of the Turbocompounded Diesel System for Engine Performance and Component Heat Transfer Studies," SAE Paper 860329, 1986.
19. Arpaci, V.S., Microscales of Turbulence Heat and Mass Transfer Correlations, Gordon and Breach, 1997.
20. Borman, G., and Nishiwaki, K., "Internal-Combustion Engine Heat Transfer," Progress in Energy and Combustion Science, Vol. 13, pp. 1-46, 1987.
21. Lyford-Pike, E.J., and Heywood, J.B., "Thermal Boundary Layer Thickness in the Cylinder of a Spark-Ignition Engine," International Journal of Heat and Mass Transfer, Vol. 27, No. 10, pp. 1873-1878, 1984.
22. Kee, R.J., Rupley F.M., and Miller J.A., "Chemkin-II: A FORTRAN Chemical Kinetics Package for the Analysis of Gas-Phase Chemical Kinetics," Sandia National Labs Report SAND89-8009B, 1991.
23. Tannehill, J.C., Anderson, D.A., Pletcher, R.H., Computational Fluid Mechanics and Heat Transfer, Hemisphere Publishing Corporation, 1997.
24. Agarwal, A., and Assanis D.N., "Modeling the Effect of Natural Gas Composition on Ignition Delay Under Compression Ignition Conditions," SAE Paper 971711, 1997.
25. Jessee, J.P., Gansman R.F., and Fiveland W.F., "Multi-Dimensional Analysis of Turbulent Natural Gas Flames Using Detailed Chemical Kinetics," Combustion Science and Technology, Vol. 129, pp. 113-140, 1997.
26. Smith, G.P., Golden G.M., Frenklach M., Moriarty N.W., Eiteneer B., Goldenberg M., Bowman T., Hanson R., Song S., Gardiner G.C. Jr., Lissianski V., and Qin Z., GRI-MECH 3.0, http://www.me.berkeley.edu/gri-mech/
27. Warnatz J., "A Reaction Mechanism for the Description of Low and High Temperature Oxidation of Hydrocarbon-Air Mixtures at Lean and Rich Conditions," 1999.
28. Keck, J.C., "Thermal Boundary Layer in a Gas Subject To a Time Dependent Pressure" Letters in Heat and Mass Transfer, Vol. 8, pp. 313-319, 1981.
29. Blumberg, P.N., Lavoie, G., and Tabaczynski, R., Phenomenological Models for Reciprocating Internal Combustion Engines" Progress in Energy Combustion and Science, Vol 5., pp. 123-167, 1979.
30. Annand, W.J.D., "Heat Transfer in the Cylinders of Reciprocating Engines," Proc Instn Mech Engrs, Vol. 177, No. 36, 1963.
31. Oguri, T., "Theory of Heat Transfer in the Working Gases of Internal Combustion Engines," Bulletin of the JSME, Vol. 3, No. 11, 1960.
32. Dao, K., Uyehara, O.A., and Myers, P.S., "Heat Transfer Rates at Gas-Wall Interface in Motored Piston Engine," SAE Paper 730632, 1973.
33. Yang, J., and Martin, J.K., "Approximate Solution-One-Dimensional Energy Equation for Transient, Compressible, Low Mach Number Turbulent Boundary Layer Flows" Journal of Heat Transfer, Vol. 111, pp. 619-624, 1989.
34. Borgnakke, C., Arpaci, V.S., and Tabaczynski, R.J., "A Model for the Instantaneous Heat Transfer and Turbulence in a Spark Ignition Engine," SAE Paper 800287, 1980.
35. Puzinauskas, P., and Borgnakke, C., "Evaluation and Improvement of an Unsteady Heat Transfer Model for Spark Ignition Engines," SAE Paper 910298, 1991.
36. Han, Z., and Reitz, R., "A Temperature Wall Function Formulation for Variable-Density Turbulent Flows with Application to Engine Convective Heat Transfer Modeling," International Journal of Heat Transfer, Vol., 40, No. 3, pp. 613-625.
37. Martin, M.K., and Heywood, J.B., Approximate Relationships for the Thermodynamic Properties of Hydrocarbon-Air Combustion Products, Combustion and Flame, Vol. 15, pp. 1-10, 1977.
38. Kuo, K.K., Principles of Combustion, John Wiley & Sons, N.Y., N.Y., 1986.
39. Kundu, P., Fluid Mechanics, Academic Press, Inc., San Diego, Ca, 1990.
40. Kays, W.M., Turbulent Prandtl Number-Where are We?, ASME J. Heat Transfer, Vol, 116, pp. 284-295, 1994.
41. Wolfshtein, M., The velocity and Temperature Distribution in One-Dimensional Flow with Turbulence Augmentation and Pressure Gradient, International J. Heat and Mass Transfer, Vol. 12, pp. 301-318.
42. Reynolds, W.C., Computation of Turbulent Flows, A. Rev. Fluid Mech., Vol. 8, pp. 183-207, 1976.
43. Heywood, J.B., Internal Combustion Engine Fundamentals, Mcgraw-Hill, 1988.
44. Jenkin, R.J., James, E.H., Malalasekera, "Modeling Near Wall Temperature Gradients in "Motored" Spark Ignition Engines" SAE Paper 960070.
45. Thoren, T.R., Engemann, H.H., and Stoddart, D.A., 1956, "Cam Design as Related to Valve Train Dynamics," Symposium on Internal Combustion Engine Valves, Thompson Products Inc.
46. Assanis, D.N., and Polishak, M., "Valve Event Optimization in a Spark-Ignition Engine," Trans., Journal of Engineering for Gas Turbines and Power, Vol. 112, pp. 341-347, 1990.
47. Noyes, R.N., Analytical Prediction of Discharge Coefficients for Engine Poppet Valves, GMR #346, 1980
48. Johansson, B., and Olsson, K., "Combustion Chambers for Natural Gas SI Engines Part 1: Fluid Flow and Combustion" SAE Paper 950469, 1995.
49. Glassman, I., Combustion, Academic Press, Inc., San Diego, Ca, 1996.