A multi-zone model for prediction of HCCI combustion and emissions

SAE Technical Papers

Volumn , Issue , 2000, Pages

  Aceves, Salvador M ^a   Flowers, Daniel L ^a   Westbrook, Charles K ^a   Smith, J Ray ^a   Pitz, William ^a   Dibble, Robert ^b   Christensen, Magnus ^c   Johansson, Bengt ^c  

^a LAWRENCE LIVERMORE NATIONAL LABORATORY   (United States)

^b UNIVERSITY OF CALIFORNIA   (United States)

^c LUND INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

BOUNDARY LAYER FLOW; BOUNDARY LAYERS; CARBON MONOXIDE; CODES (SYMBOLS); CYLINDERS (SHAPES); DIESEL ENGINES; EFFICIENCY; FLUID MECHANICS; FORECASTING; KINETICS; MIXTURES; THERMAL GRADIENTS; TRANSPORT PROPERTIES;

BOUNDARY LAYER THICKNESS; CARBON MONOXIDE EMISSIONS; COMBUSTION EFFICIENCIES; COMPUTATIONAL INTENSITY; DETAILED CHEMICAL KINETIC; EFFECTS OF TEMPERATURE; HOMOGENEOUS CHARGE COMPRESSION IGNITION COMBUSTIONS; INDICATED EFFICIENCY;

IGNITION;

EID: 85072455468     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2000-01-0327     Document Type: Conference Paper

References (24)

1. Suzuki, H., Koike, N., Ishii, H., and Odaka, M., "Exhaust Purification of Diesel Engines by Homogeneous Charge with Compression Ignition Part 1: Experimental Investigation of Combustion and Exhaust Emission Behavior Under Pre-Mixed Homogeneous Charge Compression Ignition Method," SAE paper 970313, 1997.
2. Onishi, S., Jo, S. H., Shoda, K., Jo, P. D., and Kato, S., "Active Thermo-Atmosphere Combustion (ATAC) -A New Combustion Process for Internal Combustion Engines," SAE paper 790501, 1979.
3. Noguchi, M., Tanaka, Y., Tanaka, T., and Takeuchi, Y., "A Study on Gasoline Engine Combustion by Observation of Intermediate Reactive Products During Combustion," SAE paper 790840, 1979.
4. Najt, P. M., and Foster, D. E., "Compression-Ignited Homogeneous Charge Combustion," SAE paper 830264, 1983.
5. Amsden, A.A., "KIVA-3: A KIVA Program with Block-Structured Mesh for Complex Geometries," Los Alamos National Laboratory Report LA-12503-MS, 1993.
6. Akagawa, H., Miyamoto, T., Harada, A., Sasaki, S., Shimazaki, N., Hashizuma, T., and Tsujimura, K., "Approaches to Solve Problems of the Premixed Lean Diesel Combustion," SAE paper 1999-01-0183, 1999.
7. Yokota, H., Kudo, Y., Nakajima, H., Kakegawa, T., and Suzuki, T., "A New Concept for Low Emission Diesel Combustion," SAE paper 970891, 1997.
8. Ishii, H., Koike, N., Suzuki, H., and Odaka, M., "Exhaust Purification of Diesel Engines by Homogeneous Charge with Compression Ignition Part 2: Analysis of Combustion Phenomena and NOx Formation by Numerical Simulation with Experiment," SAE paper 970315, 1997.
9. Hashizume, T., Miyamoto, T., Akagawa, H., and Tsujimura, K., "Combustion and Emission Characteristics of Multiple Stage Diesel Combustion," SAE paper 980505, 1998.
10. Miyamoto, T., Hayashi, A. K., Harada, A., Sasaki, S., Hisashi, A., and Tujimura, K., "A Computational Investigation of Premixed Lean Diesel Combustion," SAE paper 1999-01-0229, 1999.
11. Lund, C. M., "HCT-A General Computer Program for Calculating Time-Dependent Phenomena Involving One-Dimensional Hydrodynamics, Transport, and Detailed Chemical Kinetics," Lawrence Livermore National Laboratory report UCRL-52504, 1978.
12. Kee, R.J., Rupley, F.M., Meeks, E., and Miller, J.A., "CHEMKIN III: A Fortran Chemical Kinetics Package for the Analysis of Gas-Phase Chemical and Plasma Kinetics," Sandia National Laboratories Report SAND96-8216, Livermore, CA, May 1996.
13. Christensen, M., Johansson, B., Amneus, P., and Mauss, F., "Supercharged Homogeneous Charge Compression Ignition," SAE Paper 980787.
14. Aceves, S.M., Smith, J.R., Westbrook, C., and Pitz, W., "Compression Ratio Effect on Methane HCCI Combustion," ASME Journal of Engineering for Gas Turbines and Power, Vol. 121, pp. 569-574, 1999.
15. Flowers, D. L., Aceves, S. M., Westbrook, C. K., Smith, J.R., and Dibble, R. W., "Sensitivity of Natural Gas HCCI Combustion to Fuel and Operating Parameters Using Detailed Kinetic Modeling," In AES-Vol. 39, "Proceedings of the ASME Advanced Energy Systems Division-1999," Edited by Aceves S.M., Garimella S., and Peterson R., pp. 465-473, 1999.
16. Glassman, I., Combustion, Academic Press, Orlando, FL, 1987.
17. Iida, N., Ichikura, T., Kase, K., and Enomoto, Y., "Self-Ignition and Combustion Stability in a Methanol Fueled Low Heat Rejection Ceramic ATAC Engine- Analysis of Cyclic Variation at High Wall Temperatures and Lean Burn Operation," Society of Automotive Engineers of Japan paper 9733684, 1997.
18. Iida, N., "Alternative Fuels and Homogeneous Charge Compression Ignition Combustion Technology," SAE paper 972071, 1997.
19. Heywood, J. B., Internal Combustion Engine Fundamentals, McGraw-Hill, Inc., New York, NY, 1988.
20. Woschni, G., "Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine," SAE Paper 670931, 1967.
21. Curran, H. J., Gaffuri, P., Pitz, W. J., Westbrook, C. K., and Leppard, W. R., "Autoignition Chemistry of the Hexane Isomers: An Experimental and Kinetic Modeling Study," SAE paper 952406.
22. Frenklach, M., Wang, H., Goldenberg, M., Smith G. P., Golden, D. M., Bowman, C. T., Hanson, R. K., Gardiner, W. C.,and, Lissianski, V., 1995, "GRI-Mech -An Optimized Detailed Chemical Reaction Mechanism for Methane Combustion" GRI Topical Report No. GRI-95/0058.
23. Iwabuchi, Y., Kawai, K., Shoji, T., and Takeda, Y., "Trial of New Concept Diesel Combustion System-Premixed Compression-Ignition Combustion," SAE Paper 1999-01-0185.
24. nd Edition, Springer, Berlin, 1998.