Numerical predictions of diesel flame lift-off length and soot distributions under low temperature combustion conditions

SAE Technical Papers

Volumn , Issue , 2008, Pages

  Vishwanathan, Gokul ^a   Reitz, Rolf D ^a  

^a UNIVERSITY OF WISCONSIN MADISON   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIR ENTRAINMENT; COMBUSTION; COMBUSTION CHAMBERS; FORECASTING; HEPTANE; REACTION INTERMEDIATES; SOOT; TEMPERATURE;

ACCURATE PREDICTION; CONSTANT VOLUME COMBUSTION CHAMBERS; LOW TEMPERATURE COMBUSTION; NUMERICAL PREDICTIONS; PREDICTIVE CAPABILITIES; REDUCED CHEMISTRY MECHANISMS; SANDIA NATIONAL LABS; SOOT DISTRIBUTIONS;

DUST;

EID: 85072451551     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2008-01-1331     Document Type: Conference Paper

References (29)

1. Akihama, K., Takatori, Y., Inagaki, K., Sasaki, S., and Dean, A.M., "Mechanism of the Smokeless Rich Diesel Combustion by Reducing Temperature," SAE paper 2001-01-0655, 2001.
2. Kitamura, T., Ito, T., Senda, J., and Fujimoto, H., "Mechanism of Smokeless Diesel Combustion with Oxygenated Fuels based on the Dependence of the Equivalence Ratio and Temperature on Soot Particle Formation," International Journal of Engine Research, 3 (4), 223-248, 2002.
3. Kamimoto, T., and Bae, M.H., "High Temperature for the reduction of particulate in diesel engines," SAE paper 880423, 1988.
4. Pickett, L.M., and Idicheria, C.A., "Effects of Ambient Temperature and Density on Soot Formation under High EGR Conditions," THIESEL 2006 Conference on Thermo-and Fluid Dynamic Processes in Diesel Engines, 2006.
5. Siebers, D., and Higgins, B., "Flame Lift-off on Direct-Injection Diesel Sprays Under Quiescent Conditions," SAE paper 2001-01-0530, 2001.
6. Pickett, L. M., and Siebers, D.L., "Soot in Diesel Fuel Jets: Effects of Ambient Temperature, Ambient Density, and Injection Pressure," Combustion and Flame, 138, 114-135, 2004.
7. Kong, S.C., and Reitz, R.D., "Use of Detailed Chemical Kinetics to Study HCCI Engine Combustion with Consideration of Turbulent Mixing Effects," ASME Journal of Gas Turbines and Power, 124, 702-707, 2002.
8. Han, Z., and Reitz, R.D., "Turbulence Modeling of Internal Combustion Engines using RNG k-ε Models," Combust. Sci. and Tech, 106, 267-295, 1995.
9. Tao, F., Liu, Y., RempelEwert, B.H., Foster, D.E., Reitz, R.D., Choi, D., and Miles, P.C., "Modeling the Effects of EGR and Injection Pressure on Soot Formation in a High-Speed Direct Injection (HSDI) Diesel Engine Using a Multi-Step Phenomenological Soot Model," SAE paper 2005-01-0121, 2005.
10. Tao, F., Reitz, R.D., Foster, D,E., Liu, Y., "A Nine-Step Phenomenological Diesel Soot Model Validated Over a Wide Range of Engine Conditions," Submitted to Combustion Science and Technology, 2007.
11. Hiroyasu, H., and Kadota, T., "Models for Combustion and Formation of Nitric Oxide and Soot in DI Diesel Engines," SAE paper 760129, SAE Transactions, 85, 1976.
12. Nagle, J., and Strickland-Constable, R.F., "Oxidation of Carbon between 1000-2000°C," Proceedings of the fifth carbon conference, 1, Pergammon Press, 154, 1962.
13. Kong, S.C, Sun, Y., and Reitz, R.D., "Modeling Diesel Spray Flame Liftoff, Sooting Tendency, and NOx Emissions Using Detailed Chemistry with Phenomenological Soot Model," ASME Journal of Gas Turbines and Power, 129, 245-251, 2007.
14. Kazakov, A., and Foster, D.E., "Modeling of Soot Formation during DI Diesel Combustion Using a Multi-Step Phenomenological Model," SAE paper 982463, 1998.
15. Liu, F., Thomson, K.A., Guo, H., and Smallwood, G.J., "Numerical and Experimental Study of an Axisymmetric Coflow Laminar Methane-Air Diffusion Flame at Pressures between 5 and 40 Atmospheres," Combustion and Flame, 146, 456-471, 2006.
16. Leung, K.M., Lindstedt, R.P., and Jones, W.P., "A Simplified Reaction Mechanism for Soot Formation in Non-Premixed Flames," Combustion and Flame, 87, 289-305, 1991.
17. Neoh, K.G., Howard, J.B., Sarofim, A.F., "Effect of Oxidation on the Physical Structure of Soot," 20th Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, PA, 951-957, 1984.
18. Heywood, J.B., Internal Combustion Engine Fundamentals, McGraw-Hill Book Company, 1988.
19. Fairweather, M., Jones, W.P., and Lindstedt, R.P., "Predictions of Radiative Transfer from a Turbulent Reacting Jet in a Cross-Wind," Combustion and Flame, 89, 45-63, 1992.
20. Zhang, Z., and Ezekoye, O.A., "Soot Production Rate Calculations at Elevated Pressure in a Methane-Air Jet Diffusion Flame," Combust. Sci. and Tech., 137, 323-346, 1998.
21. Puri, R.J., Santoro, R.J., and Smyth, K.C., "The Oxidation of Soot and Carbon Monoxide in Hydrocarbon Diffusion Flames," Combustion and Flame, 97, 125-144, 1994.
22. Frenklach, M., and Wang, H., "Detailed Modeling of Soot Particle Nucleation and Growth," 23rd Symposium (International) on Combustion, The Combustion Institute, Pittsburgh, PA, 1559-1566, 1990.
23. Patel, A., Kong, S.C, and Reitz, R.D., "Development and Validation of a Reduced Reaction Mechanism for HCCI Engine Simulations," SAE paper 2004-01-0558.
24. Golovitchev, V.I., http://www.tfd.chalmers.se/∼valeri/, Chalmers Univ. of Tech., Gothenburg, Sweden, 2000.
25. Maroteaux, F., and Noel, L., "Development of a Reduced n-heptane Oxidation Mechanism for HCCI Combustion Modeling," Combustion and Flame, 146, 246-267, 2006.
26. http://public.ca.sandia.gov/ecn//http://public.ca.sandia.gov/ecn//cvdata/ frameset.html
27. Singh, S., Wickman, D., Stanton, D., Tan, Z., and Reitz, R.D., "Development and Validation of a Hybrid, Auto-ignition/Flame-Propagation Model against Engine Experiments and Flame Liftoff," SAE paper 2007-01-0171.
28. Idicheria, C.A., and Pickett, L.M., "Formaldehyde Visualization Near Lift-off Location in a Diesel Jet," SAE paper 2006-01-3434.
29. Vishwanathan, G., and Reitz, R.D., "Modeling Soot Formation using Reduced PAH chemistry in nheptane Lifted Flames with Application to Low Temperature Combustion," Submitted to the Proceedings of the ASME Internal Combustion Engine Division 2008 Spring Technical Conference.