Investigating the effect of spray targeting and impingement on diesel engine cold start

SAE Technical Papers

Volumn , Issue , 2000, Pages

  Lippert, Andreas M ^a   Stanton, Donald W ^a   Reitz, Rolf D ^a   Rutland, Christopher J ^a   Hallett, William L H ^b  

^a University of Wisconsin Madison   (United States)

^b UNIVERSITY OF OTTAWA   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

ATOMIZATION; FUELS; PROBABILITY DENSITY FUNCTION; PROBABILITY DISTRIBUTIONS; STARTING;

CONTINUOUS DISTRIBUTION; DETAILED MODELING; DISCRETE COMPONENTS; MULTICOMPONENT FUEL; OPERATING CONDITION; SECONDARY ATOMIZATION; SPRAY IMPINGEMENT; STARTING PERFORMANCE;

DIESEL ENGINES;

EID: 85072449227     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2000-01-0269     Document Type: Conference Paper

References (77)

1. Phatak R., and Nakamura T., 1983, "Cold Startability of Open-Chamber Direct-Injection Diesel Engines-Part I: Measurement Technique and Effects of Compression Ratio," SAE Technical Paper 831335.
2. Zahdeh A.K., Henein N., and Bryzik W., 1990, "Diesel Cold Starting: Actual Cycle Analysis Under Border-Line Conditions," SAE Technical Paper 900441.
3. Henein N. A., 1976, "Analysis of Pollutant Formation and Control and Fuel Economy in Diesel Engines," Prog. Energy Combust. Sci., Vol. 1, pp. 165-207, Pergamon Press.
4. Henein N.A., and Lee C.-S., 1986, "Autoignition and Combustion of Fuels in Diesel Engines Under Low Ambient Temperatures," SAE Technical Paper 861230.
5. Mitchell K., 1993, "Cold Performance of Diesel Engines," SAE Technical Paper 932768.
6. Lindl B., and Schmitz H.G., 1999, "Cold Start Equipment for Diesel Direct Injection Engines," SAE Technical Paper 1999-01-1244.
7. Taracha J.W., and Cliffe J.W., 1982, "The Effects of Cetane Quality on the Performance of Diesel Engines," SAE Technical Paper 821232.
8. Weidmann K., 1988, "Diesel Fuel Quality Effects on Exhaust Emissions," SAE Technical Paper 881649.
9. Zahdeh A.K., and Henein N., 1992, "Diesel Engine Cold Starting: White Smoke," SAE Technical Paper 920032.
10. Avallone E.A., ed., and Baumeister T., ed., 1996, "Marks' Standard Handbook for Mechanical Engineers, McGraw-Hill.
11. Gonzalez M. A. D., Borman G. L., and Reitz R. D., 1991, "A Study of Diesel Cold Starting using both Cycle Analysis and Multidimensional Calculations," SAE Technical Paper 910180.
12. Ayoub N. S., and Reitz R. D., 1997, "Multidimensional Modeling of Fuel Effects and Split Injections on Diesel Engine Cold Starting," AIAA Journal of Propulsion and Power, Vol. 13, No. 1, pp. 123-130.
13. Stanton, D.W., Lippert A. M., Reitz R.D., and Rutland C. J., 1998, "Influence of Spray-Wall Interaction and Fuel Films on Cold Starting in Direction Injection Diesel Engines," SAE Technical Paper Series, 982584.
14. Jin J. D., and Borman G. L., 1985, "A Model for Multicomponent Droplet Vaporization at High Ambient Pressures," SAE Technical Paper 850264.
15. Yassine M. K., Tagamori M. K., and Henein N. A., 1996, "White Smoke Emissions Under Cold Starting of Diesel Engines," SAE Technical Paper 960249.
16. Phatak R., and Nakamura T., 1983, "Cold Startability of Open-Chamber Direct-Injection Diesel Engines-Part II: Combustion Chamber Design and Fuel Spray Geometry and Additional Air and Glow Plug as a Starting Aid," SAE Technical Paper 831396.
17. Tsunemoto H., Yamada T., and Ishitani H., 1986, "Behavior of Adhering Fuel on Cold Combustion Chamber Wall in Direct Injection Diesel Engines," SAE Technical Paper 861235.
18. Osuka I., Nishimura M., Tanaka Y., and Miyaki M., 1994, "Benefits of New Fuel Injection System Technology on Cold Startability of Diesel Engines-Improvement of Cold Startability and White Smoke Reduction by Means of Multi Injection with Common Rail Fuel System (ECD-U2)," SAE Technical Paper 940586.
19. Lara-Urbaneja P., and Sirignano W., 1981, "Theory of Transient Multicomponent Droplet Vaporization in a Convective Field," Proc. Eighteenth Symposium Intl., Combust., The Combustion Institute, 1365-1374.
20. Law C. K., 1976, "Multicomponent Droplet Combustion with Rapid Internal Mixing," Combustion and Flame, Vol. 26, pp. 219-233.
21. Law C. K., 1982, "Recent Advances in Droplet Vaporization and Combustion," Prog. Energy Combust. Sci., Vol. 8, pp. 171-201.
22. 2-Law for Multicomponent Droplet Vaporization and Combustion," AIAA Journal, Vol. 20, 522-527.
23. Gradinger T. B., and Boulouchos K., 1998, "A Zero-Dimensional Model for Spray Droplet Vaporization at High Pressures and Temperatures," Int. J. Heat Mass Transfer, Vol. 41, pp. 2947-2959.
24. Radosj M., Cotterman R.L., and Prausnitz J.M., 1987, "Phase Equilibria in Supercritical Propane Systems for Separation of Continuous Oil Mixtures," Ind. Eng. Chem., Vol. 26, pp. 731-737.
25. Shibata S. K., Sandler S. I., and Behrens R. A., 1987, "Phase Equilibrium Calculations for Continuous and Semicontinuous Mixtures," Chem. Eng. Sci., Vol. 42, pp. 1977-1988.
26. Gualtieri J.A., Kincaid J.M., and Morrison G., 1982, "Phase Equilibria in Polydisperse Fluids," J. Chem. Phys., Vol. 77, No. 1, pp. 521-536.
27. Briano J. G., and Glandt E. D., 1983 "Molecular Thermodynamics of Continuous Mixtures," Fluid Phase Equilibria, Vol. 14, pp. 91-102.
28. Kehlen H., Rätzsch M.T., and Bergmann J., 1985, "Continuous Thermodynamics of Multicomponent Systems," AIChE J., Vol. 31, No. 7, pp. 1136-1148.
29. Cotterman R. L., and Prausnitz J. M., 1985, "Flash Calculations for Continuous or Semicontinuous Mixtures Using an Equation of State," Ind. Eng. Chem. Process Des. Dev., Vol. 23, pp. 434-443.
30. Hendriks E.M., 1987, "Simplified Phase Equilibrium Relations for Multicomponent Systems," Fluid Phase Equilibria, Vol. 33, pp. 207-221.
31. Rätzsch M. T., and Kehlen H., 1983, "Continuous Thermodynamics of Complex Mixtures," Fluid Phase Equilibria, Vol. 14, 225-234, 1983.
32. Cotterman R. L., Bender R., and Prausnitz J. M., 1985, "Phase Equilibria for Mixtures Containing Very Many Components: Development and Application of Continuous Thermodynamics for Chemical Process Design," Ind. Eng. Chem. Process Des. Dev., Vol. 24, pp. 194-203.
33. Cotterman R. L., and Prausnitz J. M., 1991, "Continuous Thermodynamics for Phase-Equilibrium Calculations in Chemical Process Design," Kinetic and Thermodynamic Lumping of Multicomponent Mixtures, ed. Astarita G., and Sandler S.I., Elsevier, pp. 229-275.
34. Tamim J., and Hallett W.L.H., 1995, "Continuous Thermodynamics Model For Multicomponent Vaporization," Chem. Engr. Sci., Vol. 50, No 18, 2933-2942.
35. Hallett W. L. H., 1997, "A Simple Quasi-Steady Droplet Evaporation Model Using Continuous Thermodynamics," The Combustion Institute, Canadian Section, Spring Technical Meeting.
36. Lippert A.M., and Reitz R.D., 1997, "Modeling of Multicomponent Fuels Using Continuous Distributions with Application to Droplet Evaporation and Sprays," SAE Paper 972882.
37. Lippert A.M., 1999, "Modeling of Multicomponent Fuels with Application to Sprays and Simulation of Diesel Engine Cold Start," Ph.D. Thesis, University of Wisconsin-Madison, Madison, WI.
38. Sirignano W. A., 1983, "Fuel Droplet Vaporization and Spray Combustion Theory," Prog Energy Combust Sci, Vol. 9, pp. 291-322.
39. Arcoumanis C., Gavaises M., and French B., 1997, "Effect of Fuel Injection Processes on the Structure of Diesel Sprays," SAE Technical Paper 970799.
40. Siebers D.L., 1999, "Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization," SAE Technical Paper 1999-01-0528.
41. Hubbard G.L., Denny V.E., and Mills A.F., 1975, "Droplet evaporation: Effects of transients and variable properties," Int. J. Heat Mass Transfer, Vol. 18, pp. 1003-1008.
42. Whitson C. H., 1983, "Characterizing Hydrocarbon Plus Fractions," Soc. Petroleum Engineers Jnl., Vol. 1983, 683-694.
43. Stanton D. W., 1998, "Multi-dimensional Modeling of Fuel Films and Spray-Wall Interactions Resulting from Impinging Sprays," Ph.D. Thesis, University of Wisconsin-Madison.
44. Stanton, D.W., and Rutland, C.J., 1998, "Multi-Dimensional Modeling of Heat and Mass Transfer of Fuel Films Resulting from Impinging Sprays," SAE Technical Paper Series, 980132.
45. Stanton, D.W., and Rutland, C.J., 1998, "Multi-Dimensional Modeling of Thin Liquid Films and Spray-Wall Interactions Resulting from Impinging Sprays," Int. J. Heat Mass Transfer, Vol. 41, pp. 3037-3054.
46. Stanton, D.W., and Rutland, C.J., 1997, "Multi-Dimensional Modeling of Fuel Films in Direct Injection Diesel Engines," ASME Internal Combustion Engine Fall Conference, Madison, Wisconsin.
47. Stanton, D.W., and Rutland, C.J., 1996, "Modeling Fuel Film Formation and Wall Interaction in Diesel Engines," SAE Technical Paper 960628.
48. O'Rourke P. J., and Amsden A. A., 1996, "A Particle Numerical Model for Wall Film Dynamics in Port Injected Engines," SAE Technical Paper 961961.
49. Holman J.P., 1989, "Heat Transfer," McGraw-Hill Book Co.
50. Reid R.C., Prausnitz J.M., and Poling B.E., 1986, "The Properties of Gases and Liquids," McGraw-Hill Book Company.
51. Halstead M., Kirsh L., and Quinn C., 1977, "The Autoignition of Hydrocarbon Fuels at High Temperatures and Pressures-Fitting of a Mathematical Model," Combust. Flame, Vol. 30, pp. 45-60.
52. Kong S.-C., and Reitz R. D., 1993, "Multidimensional Modeling of Diesel Ignition and Combustion Using a Multistep Kinetics Model," ASME Paper 93-ICE-22, also Journal of Engineering for Gas Turbines and Power, Vol. 115, pp. 781-789.
53. Kong S.-C., Han Z., and Reitz R.D., 1995, "The Development and Application of a Diesel Ignition and Combustion Model for Multidimensional Engine Simulation," SAE Technical Paper 950278.
54. Heywood J.B., 1988, "Internal Combustion Engine Fundamentals," McGraw-Hill, New York.
55. Rose J.W., and Cooper J.R., 1977, "Technical Data on Fuel," John Wiley & Sons, New York.
56. Glavincevski B., Gülder O.L., and Gardner L., 1984, "Cetane Number Estimation of Diesel Fuels from Carbon Type Structural Composition," SAE Technical Paper 841341.
57. Abraham J., Bracco F.V., and Reitz R. D., 1985, "Comparisons of Computed and Measured Premixed Charge Engine Combustion," Combust. Flame, Vol. 60, pp. 309-322, 1985.
58. Peters N., 1984, "Laminar Diffusion Flamelet Models in Non-Premixed Turbulent Combustion," Prog. Energy Combust. Sci., Vol. 10, pp. 319-339.
59. Han Z., and Reitz R.D., 1995, "Turbulence Modeling of Internal Combustion Engines Using RNG k-e Models," Combust. Sci. and Tech., Vol. 106, p. 267.
60. Han Z., and Reitz R.D., 1996, "A Temperature Wall Function Formulation for Variable-Density Turbulence Flows with Application to Engine Convective Heat Transfer Modeling," Intl. Jnl. Heat Mass Transfer.
61. Ricart L.M., Xin J., Bower G.R., and Reitz R.D., 1997, "In-Cylinder Measurement and Modeling of Liquid Fuel Spray Penetration in a Heavy-Duty Diesel Engine," SAE Technical Paper 971591.
62. Patterson, M. A., 1997, "Modeling the Effects of Fuel Injection Characteristics on Diesel Combustion and Emissions," Ph.D. Thesis, University of Wisconsin Madison.
63. Liu A.B, Mather D., and Reitz R.D., 1993, "Modeling the Effects of Drop Drag and Breakup on Fuel Sprays," SAE Paper 970879.
64. X Emissions Reduction Using Multiple-Injection in a Diesel Engine," SAE Technical Paper 960633.
65. Hiroyasu H., Kadota T., Senda T., and Imamoto T., 1974, "Evaporation of a Single Droplet at Elevated Pressures and Temperatures: Experimental Study," Trans. Japan Soc. Mech. Engrs., Vol. 40, pp. 3147-3161.
66. Abramzon B., and Sirignano W.A., 1989, "Droplet Vaporization Model for Spray Combustion Calculations," Int. J. Heat Mass Transfer, Vol. 32, No. 9, pp. 1605-1618.
67. Chen K.C., DeWitte K., and Cheng W.K., 1994, "A Species-Based Multi-Component Volatility Model for Gasoline," SAE Paper 941877.
68. Chevron Products Company, 1998, Personal Communication.
69. Caterpillar Inc., 1998, Personal Communication.
70. Hiroyasu H., 1991, "Experimental and Theoretical Studies on the Structure of Fuel Sprays in Diesel Engines," ICLASS-91, Gaithersburg, MD, 1991.
71. Reitz, R.D., 1987, "Modeling Atomization Processes in High-Pressure Vaporizing Sprays," Atomization and Spray Technology, Vol. 3, 309.
72. Levich, V.G., 1962, "Physiochemical Hydrodynamics," Prentice-Hall Inc., New Jersey.
73. Naber J. D., and Reitz R.D., 1988, "Modeling Engine Spray/Wall Impingement," SAE Technical Paper 880107.
74. Amsden A. A., O'Rourke P. J., and Butler T. D., 1989, "KIVA-II-A Computer Program for Chemically Reactive Flows with Sprays," Los Alamos National Labs., LA-11560-MS.
75. Wolfer H. H., 1938, VDI Forsch.h., 392.
76. Montgomery, D.T., 1996, "An Investigation into the Effects of Injection and EGR Parameters on the Emissions and Performance of Heavy Duty Diesel Engines," MS Thesis, University of Wisconsin-Madison.
77. Montgomery, D.T., 1999, Personal Communication.