Multi-dimensional modeling of heat and mass transfer of fuel films resulting from impinging sprays

SAE Technical Papers

Volumn , Issue , 1998, Pages

  Stanton, Donald W ^a   Rutland, Christopher J ^a  

^a UNIVERSITY OF WISCONSIN MADISON   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTATIONAL FLUID DYNAMICS; DIESEL ENGINES; DROPS; ENGINE CYLINDERS; FUELS; HEAT TRANSFER; MASS TRANSFER; MOMENTUM; PRESSURE EFFECTS; SHEAR FLOW; WETTING;

CONVECTIVE HEAT AND MASS TRANSFERS; DIRECT INJECTION DIESEL ENGINES; FUEL FILM THICKNESS; HEAT AND MASS TRANSFER; LIQUID-PHASE DISTRIBUTION; MULTI-DIMENSIONAL MODEL; SECONDARY ATOMIZATION; THREE-DIMENSIONAL SURFACE;

DIRECT INJECTION;

EID: 85072448993     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/980132     Document Type: Conference Paper

References (37)

1. Amsden, A.A., O'Rourke, P.J., and Butler, T.D., "KIVA: A Computer Program for Two-and Three-Dimensional Fluid Flows with Chemical Reactions and Fuel Sprays," Los Alamos Report No. LA-11560-MS, (1989)
2. Stanton, D., and Rutland C., "Modeling Fuel Film Formation and Wall Interaction in Diesel Engines," SAE 960628
3. Stanton, D., and Rutland C., "Modeling of Fuel Film Heat and Mass Transfer in Diesel Engines," Seventh International- KIVA Users Meeting at the SAE Congress, (1997)
4. Servati, H.B., and Yuen, W.W., "Deposition of Fuel Droplets in Horizontal Intake Manifolds and the Behavior of Fuel Film Flow on Its Walls," SAE Paper 840239, (1984)
5. Bardon, M.F., Rao, V.K., and Gardiner, D.P., "Intake Manifold Fuel Film Transient Dynamics," SAE Paper 870569, (1987)
6. Kay, I.W., "Manifold Fuel Film Effects in an SI Engine," SAE Paper 780944, (1978)
7. Yoshikawa, Y., Nakada, T., Itoh, T., and Takagi, Y., "Numerical Simulation System for Analyzing Fuel Film Flow in Gasoline Engine," SAE Paper 930326, (1993)
8. Cartellieri, W.P., et al., "Status Report on a Preliminary Survey of Strategies to Meet US-1991 HD Diesel Emission Standards Without Exhaust Gas After Treatment." SAE Paper 870343 (1987)
9. Sakata, I., et al., "Development of a Technique for Direct Injection Diesel's Mixture Formation by Controlling Spray Impingement and Local Swirl by Wall," (In Japanese), Preprints of JSAE, No. 882, Paper No., 882080, p. 319, (1988)
10. Werlberger, P., and Cartellieri, W.P., "Fuel Injection and Combustion Phenomena in High Speed DI Diesel Engine Observed by Means of Endoscopic High Speed Photography," SAE Paper 870097, (1987)
11. Gonzalez D., M.A., Borman, G.L., and Reitz, R.D., "A Study of Diesel Cold Starting Using Both Cycle Analysis and Multidimensional Calculations," SAE Paper 910180, (1991)
12. Tsunemoto, H., and Ishitani, H., "The Behavior of Impinged Fuel Sprays on Simulated Combustion Chamber Walls in Direct Injection Diesel Engine" JSAE Review, 3 (1982)
13. O'Rourke, P., and Amsden A., "A Particle Numerical Model for Wall Film Dynamics in Port-Injection Engines," SAE Paper 961962
14. Sattelmyer, T., and Wittig S., "Performance Characteristics of Prefilming Airblast Atomizers in Comparison with Other Airblast Nozzle," Encycl. of Fluid Mechanics, Vol. 8, 1989
15. Cebeci, T., and Bradshaw P., Momentum transfer in Boundary Layers. Hemisphere, Washington, DC, 1977
16. Sill, K.H., Wärme- und Stoffübergang in turbulenten Strömungsgrenz schichten längs verdunstender welliger Wasserfilme, Dissertation, Universität Karlsrhhe, Institut für Thermische Strömungsmachinen (1982)
17. Kolpakov, A.V., et al., "Calculation of the Rebound Condition for Colliding Drops of Sharply Different Sizes" Kolloidn. Zh., Vol. 47, 1985
18. Rodrigues, F., and Mesler, R., "Some Drops Don't Splash" Journal of Colloid and Interface Science, Vol. 106, No. 2, pp. 347-352, (1985)
19. Watchers, L.H.J., and Westerling, N.A., "The Heat Transfer From a Hot Wall to Impinging Water Drops in the Spheroidal State," Chem. Eng. Sci., Vol. 21, pp. 1047-1056, (1966)
20. Jayaratne, O.W., and Mason, B.J., "The Coalescence and Bouncing of Water Drops at an Air/Water Interface, Proc. R. Soc. London, Vol. A 280, pp. 545-565, (1964)
21. Stow, C.D., and Hadfield, M.G., "An Experimental Investigation of Fluid flow Resulting From the Impact of a Water Drop with an Unyielding Dry Surface," Proc. R. Soc. Lond., Vol. A 373, pp. 419-441, (1981)
22. Yarin, A.L., and Weiss, D.A., "Impact of Drops on Solid Surfaces: Self-Similar Capillary Waves, and Splashing as a New Type of Kinematic Discontinuity," J. Fluid Mech., Vol. 283, pp. 141-173, (1995)
23. Mundo, Chr., Sommerfeld, M., and Tropea, C., "Droplet-Wall Collisions: Experimental Studies of the Deformation and Breakup Process," Int. J. Multiphase Flow, Vol. 21, No. 2, pp. 151-173, (1995)
24. Stanton, D.W., and Rutland, C.J., "Multi-Dimensional Modeling of Fuel Films in Direct Injection Diesel Engines," ASME Internal Combustion Engine Fall Conference, Madison, Wisconsin, 1997
25. Stanton, D., "Modeling Fuel Film Formation and Wall Interaction in Diesel Engines" MS Thesis, University of Wisconsin, 1995
26. Senda, J., Fukami, Y., Tanabe, Y., and Fujimoto, H., "Vizualization of Evaporating Diesel Spray Impinging Upon Wall Surface by Exciplex Fluorescence Method," SAE Technical Paper Series 920578, 1992
27. Melton, L.A., "Spectrally Separated Fluorescence Emissions for Diesel Fuel Droplets and Vapor," Appl. Optics, 22, pp. 2224-2226, 1993
28. Melton, L.A., and Verdieck, J.F., "Vapor/Liquid Visualization in Fuel Sprays," Twentieth Symp. on Combustion, The Combustion Institute, pp. 1283-1290, 1984
29. Melton, L.A., and Verdieck, J.F., "Vapor/Liquid Visualization for Fuel Sprays," Combust. Sci. and Tech., 42, pp. 217-222, 1985
30. Felton, P.G., Bracco, F.V., and Bardsley, M.E.A., "On the Quantitative Application of Exciplex Fluorescence to Engine Sprays," SAE Technical Paper Series 930870, 1993
31. Bardsley, M.E.A., Felton, P.G., and Bracco, F.V., "2-D Visualization of Liquid and Vapor Fuel in an IC Engine," SAE Technical Paper Series 880521, 1988
32. Bardsley, M.E.A., Felton, P.G., and Brocco, F.V., "2-D Visualization of a Hollow-Cone Spray in a Cup-in-Head, Ported, IC Engine," SAE Technical Paper Series 890315, 1989
33. Reid, R.C., Prausnitz, J.M., and Poling, B.E., The Properties of Gases and Liquids, McGraw-Hill, Inc., New York, 1987
34. Liu, Z., Jingwei, Z., and Yueshang, L., "Experimental Investigation of Film-Space Atomization Combustion in D.I. Diesel Engines," SAE Paper 901578, (1990)
35. Liu, Z., Xingcum Huang, Jingwei Zhou, and Yueshang Li, "Computational Investigation of Film-Space Atomization Combustion in DI Diesel Engines," SAE Paper 891916 (1989)
36. Liu, Z., Private Communication, 1995
37. Rein, M., "Phenomena of Liquid Drop Impact on Solid and Liquid Surfaces," Fluid Dynamics Research, Vol. 12, pp. 61-93, (1993).