Effects of micro-hole and ultra-high injection pressure on mixture properties of D.I. diesel spray

SAE Technical Papers

Volumn , Issue , 2007, Pages

  Nishida, Keiya ^a   Zhang, Wu ^a   Manabe, Tetsuya ^b  

^a HIROSHIMA UNIVERSITY   (Japan)

^b JAPAN TOBACCO INC   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

AIR; COMBUSTORS; DIESEL ENGINES; FUELS; NOZZLES;

EQUIVALENCE RATIOS; HIGH-PRESSURE GENERATORS; INJECTION PRESSURES; MICRO-HOLE NOZZLES; MIXTURE PROPERTIES; SAUTER MEAN DIAMETER (SMD); SPRAY CHARACTERISTICS; SPRAY TIP PENETRATION LENGTHS;

MIXTURES;

EID: 85072436696     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2007-01-1890     Document Type: Conference Paper

References (24)

1. Takeda Y., Keiichi N., and Keiichi N., "Emission characteristics of premixed lean diesel combustion with extremely early staged fuel injection," SAE paper 961163, 1996.
2. Hashizume T., Miyamoto T., Akagawa H., and Tsujimura K., "Combustion and emission characteristics of multiple-stage diesel combustion," SAE paper 980505, 1998.
3. Yanagihara H., Satou Y., and Mizuta J., "A simultaneous reduction of NOx and soot in diesel engines under a new combustion system (Uniform Bulky Combustion System -UNIBUS)," presented at 17th Int. Vienna Motor Symposium, 1996.
4. Hasegawa R., and Yanagihara H., "HCCI combustion in DI diesel engine," SAE paper 2003-01-0745, 2003.
5. Yokota H., Kudo Y., Nakajima H., Kakegawa T., and Suzuki T., "A new concept for low emission diesel combustion," SAE paper 970891, 1997.
6. Yokota H., Nakajima H., and Kakaegawa T., "A new concept for low-emission diesel combustion (2nd report: reduction of HC and CO emission, and improvement of fuel consumption by EGR and MTBE blended fuel)," SAE paper 981933, 1998.
7. Suzuki H., Koike N., Ishii H., and Odaka M., "Exhaust purification of diesel engines by homogeneous charge with compression ignition part 1: experimental investigation of combustion and exhaust emission behavior under pre-mixed homogeneous charge compression ignition method," SAE paper 970313, 1997.
8. Ishii H., Koike N., Suzuki H., and Odaka M., "Exhaust purification of diesel engines by homogeneous charge with compression ignition part 2: analysis of combustion phenomena and NOx formation by numerical simulation with experiment," SAE paper 970315, 1997.
9. Suzuki H., Koike N., and Odaka M., "Combustion control method of homogeneous charge diesel engines," SAE paper 980509, 1998.
10. Iwabuchi Y., Kawai K., Shoji T., and Takeda Y., "Trial of new concept diesel combustion system-premixed compression-ignition combustion," SAE paper 1999-01-0185, 1999.
11. Okude K., Mori K., Shiino S., and Moriya T., "Premixed compression ignition (PCI) combustion for simultaneous reduction of NOx and soot in diesel engine," SAE paper 2004-01-1907, 2004.
12. Shimazaki N., Tsurushima T., and Nishimura T., "Dual mode combustion concept with premixed diesel combustion by direct injection near top dead center," SAE paper 2003-01-0742, 2003.
13. Minato A., Tanaka T., and Nishimura T., "Investigation of premixed lean diesel combustion with ultra high pressure injection," SAE paper 2005-01-0914, 2005.
14. Hiroyasu H., and Arai M., "Structures of fuel sprays in diesel engines," SAE paper 900475, 1990.
15. Yokota H., Kosaka H., Tsujimura K., and Kamimoto T., "Fast burning and reduced soot formation via ultra-high pressure diesel fuel injection," SAE paper 910225, 1991.
16. Su T. F., Chang C. T., Reitz R. D., Farrell P. V., Pierpont A. D., and Tow T. C., "Effects of injection pressure and nozzle geometry on spray SMD and D.I. diesel emissions," SAE paper 952360, 1995.
17. Dodge L. G., Simescu S., Neely G. D., Maymar M. J., Dickey D. W., and Savonen C. L., "Effect of small holes and high injection pressures on diesel engine combustion," SAE paper 2002-01-0494, 2002.
18. Pickett L. M., and Siebers D. L., "Non-sooting, low flame temperature mixing-controlled DI diesel combustion," SAE paper 2004-01-1399, 2004.
19. Zhao H., and Ladammatos N., Engine combustion instrumentation and diagnostics: SAE, 2001.
20. Suzuki M., Nishida K., and Hiroyasu H., "Simultaneous concentration measurement of vapor and liquid in an evaporating diesel spray," SAE paper 930863, 1993.
21. Zhang Y., Yoshizaki T., and Nishida K., "Imaging of droplets and vapor distributions in a diesel fuel spray by means of a laser sbsorption-scattering technique," Applied Optics, Vol. 39, No. 33, pp. 6221-6229, 2000.
22. Zhang Y., Yoshizaki T., and Nishida K., "Quantitative measurement of droplets and vapor concentration distributions in diesel sprays by processing UV and visible images," SAE paper 2001-01-1294, 2001.
23. Siebers D. L., "Liquid-phase fuel penetration in diesel sprays," SAE paper 980809, 1998.
24. Espey C., and Dec J. E., "The effect of TDC temperature and density on the liquid-phase fuel penetration in a D.I. diesel engine," SAE paper 952456, 1995.