Integration of a continuous multi-component fuel evaporation model with an improved G-equation combustion and detailed chemical kinetics model with application to GDI engines

SAE Technical Papers

Volumn , Issue , 2009, Pages

  Yang, Shiyou ^a   Reitz, Rolf D ^a  

^a UNIVERSITY OF WISCONSIN MADISON   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ENGINES; EVAPORATION; FUEL PURIFICATION; FUNCTIONS; GASOLINE; IGNITION; MIXTURES; REACTION KINETICS; SHOCK TUBES; THERMODYNAMICS;

CONTINUOUS THERMODYNAMICS; DETAILED CHEMICAL KINETIC; FUEL INJECTION TIMING; FUNCTION OF PRESSURE; GASOLINE DIRECT INJECTION ENGINES; HEAT RELEASE RATE (HRR); IN-CYLINDER PRESSURES; MULTICOMPONENT FUEL;

DIRECT INJECTION;

EID: 85072354416     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2009-01-0722     Document Type: Conference Paper

References (44)

1. Amsden A. A., Butler T. D., O'Rourke P. J., and, Ramshaw J. D., KIVA-A Comprehensive Model for 2-D and 3-D Engine Simulations. SAE Paper 850554.
2. Amsden A. A., O'Rourke P. J., and, Butler T. D., KIVA-II: A Computer Program for Chemically Reactive Flows with Sprays. Los Alamos National Laboratory Report, LA-11560-MS, 1989.
3. Amsden A. A., KIVA-3: A KIVA Program with Block-Structured Mesh for Complex Geometries. Los Alamos National Laboratory Report, LA-12503-MS, 1993.
4. Amsden A. A., KIVA-3V: A Block-Structured KIVA Program for Engines with Vertical or Canted Valves. Los Alamos National Laboratory Report, LA-13313-MS, 1997.
5. Amsden A. A., KIVA-3V, Release 2, Improvements to KIVA-3V. Los Alamos National Laboratory Report, LA-13608-MS, 1999.
6. Lippert A. M., Modeling of Multi-Component Fuels with Application to Sprays and Simulation of Diesel Engine Cold Start. Ph.D. Thesis, University of Wisconsin-Madison, 1999.
7. Zhu G.-S., and, Reitz R. D., A Model for High Pressure Vaporization of Droplets of Complex Liquid Mixtures Using Continuous Thermodynamics. Int. J. Heat Mass Transfer, 45: 495-507, 2002. (Pubitemid 34010410)
8. Tamim J., and, Hallett W. L. H., Continuous Thermodynamics Model for Multi-Component Vaporization. Chem. Engr Sci., 50 (18): 2933-2942, 1995.
9. Lippert A. M., and, Reitz R. D., Modeling of Multi-Component Fuels Using Continuous Distributions with Application to Droplet Evaporation and Sprays. SAE Paper 972882, 1997.
10. Zuo B. F., Gomes A. M., and, Rutland C. J., Modeling of Superheated Fuel Spray and Vaporization. Int. J. Engine Res., 1 (4): 321-336, 2000. (Pubitemid 33237162)
11. Davy M. H., Williams P. A., and, Anderson R. W., Effects of Fuel Composition on Mixture Formation in a Firing Direct-Injection Spark-Ignition (DISI) Engine: An Experimental Study Using Mie-Scattering and Planar Laser-Induced Fluorescence (PLIF) Techniques. SAE Paper 2000-01-1904, 2000.
12. Ra Y., and, Reitz R. D., The Application of a Multi-Component Droplet Vaporization Model to Gasoline Direct Injection Engines. Int. J. Engine Res., 4 (3): 193-218, 2003. (Pubitemid 37141899)
13. Heywood J. B., Internal Combustion Engine Fundamentals. McGraw-Hill, 1988.
14. Peters N., Turbulent Combustion. Cambridge University Press, Cambridge, UK, 2000.
15. Fan L., and, Reitz R. D., Development of Ignition and Combustion Model for Spark-Ignition Engines. SAE Paper 2000-01-2809, 2000.
16. Williams F. A., Turbulent Combustion. SIAM, Philadelphia, 1985.
17. Peters N., The Turbulent Burning Velocity for Large Scale and Small Scale Turbulence. J. Fluid Mech., 384: 107-132, 1999.
18. Dekena M., and, Peters N., Combustion Modeling with the G-equation. Oil & Gas Science and Technology-Rev. IFP, 54 (2): 265-270, 1999.
19. Tan Z., Multi-Dimensional Modeling of Ignition and Combustion in Premixed and DIS/CI (Direct Injection Spark/Compression Ignition) Engines. Ph.D. Thesis, University of Wisconsin-Madison, 2003.
20. Ewald J., and, Peters N., A Level Set Based Flamelet Model for the Prediction of Combustion in Spark Ignition Engines. 15th International Multidimensional Engine Modeling User's Group Meeting, Detroit, MI, 2005.
21. Curran H. J., Gaffuri P., Pitz W. J., and, Westbrook C. K., A Comprehensive Modeling Study of Iso-octane Oxidation. Combustion and Flame, 129 (3): 253-280, 2002. (Pubitemid 34553323)
22. Liang L., and, Reitz R. D., Spark Ignition Engine Combustion Modeling Using a Level Set Method with Detailed Chemistry. SAE Paper 2006-01-0243, 2006.
23. Liang L., Reitz R. D., Iyer C. O., and, Yi J., Modeling Knock in Spark-Ignition Engines Using a G -equation Combustion Model Incorporating Detailed Chemical Kinetics. SAE Paper 2007-01-0165, 2007.
24. Liang L., Multidimensional Modeling of Combustion and Knock in Spark-Ignition Engines with Detailed Chemical Kinetics. Ph.D. Thesis, University of Wisconsin-Madison, 2006.
25. Tan Z., Kong S. C., and, Reitz R. D., Modeling Premixed and Direct Injection SI Engine Combustion Using the G-Equation Model. JSAE/SAE International Spring Fuels & Lubricants Meeting, Japan, JSAE Paper 2003-01-1843, 2003.
26. Tan Z., and, Reitz R. D., Modeling Ignition and Combustion in Spark-Ignition Engines Using a Level Set Method. SAE Paper 2003-01-0722, 2003.
27. Yang S., Reitz R. D., Iyer C. O., and, Yi J., Improvements to Combustion Models for Modeling Spark-Ignition Engines Using the G-equation and Detailed Chemical Kinetics. SAE Paper 2008-01-1634, 2008.
28. Yang S., Reitz R. D., Iyer C. O., and, Yi J., A Transport Equation Residual Model Incorporating Refined G-Equation and Detailed Chemical Kinetics Combustion Models. SAE Paper 2008-01-2391, 2008.
29. Chou G. F., and, Prausnitz J. M., Adiabatic Flash Calculations for Continuous or Semi-Continuous Mixtures Using an Equation of State. Fluid Phase Equilibria, 30: 75-82, 1986.
30. Han Z., and, Reitz R. D., Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε Models. Comb. Sci. Tech., 106: 267-295, 1995.
31. Metghalchi M., and, Keck J. C., Burning Velocities of Mixtures of Air with Methanol, Isooctane, and Indolene at High Pressure and Temperature. Combustion and Flame, 48: 191-210, 1982.
32. Zhao Z., Conley J. P., Kazakov A., and, Dryer F. L., Burning Velocities of Real Gasoline Fuel at 353 K and 500 K. SAE Paper 2003-01-3265, 2003.
33. Tamagna Daniele, Gentili Roberto, Ra Youngchul, and, Reitz R. D., Multidimentional Simulation of the Influence of Fuel Mixture Composition and Injection Timing in Gasoline-Diesel Dual-Fuel Applications. SAE Paper 2008-01-0031, 2008.
34. Rose J. W., and, Cooper J. R., Technical Data on Fuel. New York: Wiley, 1977.
35. Kalghatgi Gautam T., Auto-Ignition Quality of Practical Fuels and Implications for Fuel Requirements of Future SI and HCCI Engines. SAE Paper 2005-01-0239, 2005.
36. Huang Y., Sung C. J., and, Eng J. A., Laminar Flame Speeds of Primary Reference Fuels and Reformer Gas Mixtures. Combustion and Flame, 139: 239-251, 2004. (Pubitemid 39463275)
37. Ryan T. W., and, Lestz S. S., The Laminar Burning Velocity of Iso-octane, n-heptane, Methanol, Methane, and Propane at Elevated Temperature and Pressure in the Presence of a Diluent. SAE Paper 800103, 1980.
38. Kong S.-C., Marriott C. D., Reitz R. D., and, Christensen M., Modeling and Experiments of HCCI Engine Combustion Using Detailed Chemical Kinetics with Multidimensional CFD. SAE Paper 2001-01-1026, 2001.
39. Kong S.-C., and, Reitz R. D., Application of Detailed Chemistry and CFD for Predicting Direct Injection HCCI Engine Combustion and Emissions. Proc. Combust. Inst., 29: 663-669, 2002.
40. Kee R. J., Rupley F. M., and, Miller J. A., CHEMKIN-II: A FORTRAN Chemical Kinetics Package for the Analyses of Gas Phase Chemical Kinetics. Technical report, Sandia Report, 1989.
41. Tanaka S., Ayala F., and, Keck J. C., A Reduced Chemical Kinetic Model for HCCI Combustion of Primary Reference Fuels in a Rapid Compression Machine. Combustion and Flame, 133: 467-481, 2003. (Pubitemid 36808734)
42. Fieweger K., Blumenthal R., and, Adomeit G., Self-Ignition of S.I. Engine Model Fuels: A Shock Tube Investigation at High Pressure. Combustion and Flame, 109: 599-619, 1997. (Pubitemid 27221027)
43. Ra Y., and, Reitz R. D., A Reduced Chemical Kinetic Model for IC Engine Combustion Simulations with Primary Reference Fuels. Combustion and Flame (2008), doi: 10.1016/j.combustflame.2008.05.002.
44. Tan Z., and, Reitz R. D., An Ignition and Combustion Model Based on the Level-Set Method for Spark Ignition Engine Multi-Dimensional Modeling. Combustion and Flame, 145: 1-15, 2006.