Chaos in Electric Drive Systems: Analysis, Control and Application

Chaos in Electric Drive Systems: Analysis, Control and Application

Volumn , Issue , 2011, Pages

  Chau, K T ^a   Zheng, Wang ^b  

^a UNIVERSITY OF HONG KONG   (Hong Kong)

^b SOUTHEAST UNIVERSITY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

BRIDGES; CHAOS THEORY; COMPUTER HARDWARE; ELECTRIC DRIVES; HARDWARE; INDUSTRIAL ELECTRONICS; PERMANENT MAGNETS; STUDENTS;

ELECTRIC DRIVE SYSTEM; EMERGING TECHNOLOGIES; FUNDAMENTAL CONCEPTS; HARDWARE IMPLEMENTATIONS; INNOVATIVE APPROACHES; INTERDISCIPLINARY TECHNOLOGIES; PERMANENT MAGNET BRUSHLESS DRIVE; SYNCHRONOUS RELUCTANCE;

ELECTRIC MACHINE CONTROL;

EID: 85068815491     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470826355     Document Type: Book

References (342)

1. Abraham, R.H. and Ueda, Y. (2000) The Chaos Avant-Garde: Memoirs of the Early Days of Chaos Theory, World Scientific, Singapore.
2. Alvarez-Hernández, M.M., Shinbrot, T., Zalc, J., and Muzzio, F.J. (2002) Practical chaotic mixing. Chemical Engineering Science, 57,3749-3753.
3. Asakura, T., Yoneda, K., Saito, Y., and Shioya, M. (2000) Chaos detection in velocity control of induction motor and its control by using neural network. Proceedings of IEEE International Conference on Signal Processing, pp. 1633-1638.
4. Aston, P.J., Deane, J.H.B., and Hamill, D.C. (1997) Targeting in systems with discontinuities, with applications to power electronics. IEEE Transactions on Circuits and Systems-I: Fundamental Theory and Applications, 44,1034-1039.
5. Batlle, C., Fossas, E., and Olivar, G. (1999) Stabilization of periodic orbits of the buck converter by time-delayed feedback. International Journal of Circuit Theory and Applications, 27,617-631.
6. Bazanella, A.S. and Reginatto, R. (2000) Robustness margins for indirect field-oriented control of induction motors. IEEE Transactions on Automatic Control, 45,1226-1231.
7. Bellini, A., Franceschini, G., Rovatti, R. et al. (2001) Generation of low-EMIPWMpatterns for induction motor drives with chaotic maps. Proceedings of IEEE Industrial Electronics Society Annual Conference, pp. 1527-1532.
8. Ben-Tal, A., Kirk, V., and Wake, G. (2001) Banded chaos in power systems. IEEE Transactions on Power Delivery, 16,105-110.
9. Boutayeb, M., Darouach, M., and Rafaralahy, H. (2002) Generalized state space observers for chaotic synchronization and secure communication. IEEE Transactions on Circuits and Systems-I: Fundamental Theory and Applications, 49,345-349.
10. Bouzahir, H., El Guezar, F., El Aroudi, A., and Ueta, T. (2008) Partial time delayed feedback control of chaos in a hybrid model of a DC-DC converter. Proceedings of International Symposium on Communications, Control and Signal Processing, pp. 158-161.
11. Chakrabarty, K., Poddar, G., and Banerjee, S. (1996) Bifurcation behavior of the buck converter. IEEE Transactions on Power Electronics, 11,439-447.
12. Chang, F.-J., Twu, S.-H., and Chang, S. (1993) Global bifurcation and chaos from automatic gain control loops. IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, 40,403-412.
13. Chau, K.T. and Chen, J.H. (2002) Analysis of chaotic behavior in switched reluctance motors using current hysteresis regulation. Electric Power Components and Systems, 30,607-624.
14. Chau, K.T. and Chen, J.H. (2003) Modeling, analysis and experimentation of chaos in a switched reluctance drive system. IEEE Transactions on Circuits and Systems-I: Fundamental Theory and Applications, 50,712-716.
15. Chau, K.T. and Wang, Z. (2005) Application of chaotic motion to industrial compactors. Proceedings of International Conference on Electrical Machines and Systems, pp. 1644-1649.
16. Chau, K.T. and Wang, Z. (2006) Design of permanent magnets to chaoize doubly salient PM motors for electric compaction. Journal of Applied Physics, 99,80R306:1-80R306:3.
17. Chau, K.T., Chen, J.H., and Chan, C.C. (1997b) Dynamic bifurcation in DC drives. Proceedings of IEEE Power Electronics Specialists Conference, pp. 1330-1336.
18. Chau, K.T., Chen, J.H., Chan, C.C., and Chan, D.T.W. (1997c) Modeling of subharmonics and chaos in DC motor drives. Proceedings of IEEE Industrial Electronics Conference, pp. 523-528.
19. Chau, K.T., Chen, J.H., Chan, C.C., and Jiang, Q. (1999) Subharmonics and chaos in switched reluctance motor drives. Proceedings of IEEE International Electric Machines and Drives Conference, pp. 661-663.
20. Chau, K.T., Chen, J.H., Chan, C.C. et al. (1997a) Chaotic behavior in a simple DC drive. Proceedings of IEEE Power Electronics and Drive Systems Conference, pp. 473-479.
21. Chau, K.T.,Ye, S., Gao,Y., and Chen, J.H. (2004) Application of chaotic-motion motors to industrial mixing processes. Proceedings of IEEE Industry Applications Society Annual Meeting, pp. 1874-1880.
22. Chen, G. (1997) Control and anticontrol of chaos. Proceedings of International Conference on Control of Oscillations and Chaos, pp. 181-186.
23. Chen, J.H., Chau, K.T., and Chan, C.C. (1999) Chaos in voltage-mode controlled DC drive systems. International Journal of Electronics, 86,857-874.
24. Chen, J.H., Chau, K.T., and Chan, C.C. (2000a) Analysis of chaos in current-mode controlled DC drive systems. IEEE Transactions on Industrial Electronics, 47,67-76.
25. Chen, J.H., Chau, K.T., and Jiang, Q. (2001) Analysis of chaotic behavior in switched reluctance motors using voltage PWM regulation. Electric Power Components and Systems, 29,211-227.
26. Chen, J.H., Chau, K.T., Chan, C.C., and Jiang, Q. (2002) Subharmonics and chaos in switched reluctance motor drives. IEEE Transactions on Energy Conversion, 17,73-78.
27. Chen, J.H., Chau, K.T., Jiang, Q. et al. (2000c) Modeling and analysis of chaotic behavior in switched reluctance motor drives. Proceedings of IEEE Power Electronics Specialists Conference, pp. 1551-1556.
28. Chen, J.H., Chau, K.T., Siu, S.M., and Chan, C.C. (2000b) Experimental stabilization of chaos in a voltage-mode DC drive system. IEEE Transactions on Circuits and Systems-I: Fundamental Theory and Applications, 47,1093-1095.
29. Chiang, H.D., Liu, C.W., Varaiya, P.P. et al. (1993) Chaos in a simple power system. IEEE Transactions on Power Systems, 8,1407-1417.
30. Chua, L., Hasler, M., Neirynck, J., and Verburgh, P. (1982) Dynamics of a piecewise-linear resonant circuit. IEEE Transactions on Circuits and Systems, 29,535-547.
31. Chua, L.O. (1992) The Genesis of Chua's Circuit. Archiv für Elektronik und Ubertragung-stechnik, 46,250-257.
32. Chua, L.O. (2007) Chua circuit. Scholarpedia, 2,1488, http://www.scholarpedia.org/article/Chua_circuit.
33. Chua, L.O. and Lin, T. (1988) Chaos in digital filters. IEEE Transactions on Circuits and Systems, 35,648-658.
34. Chua, L.O., Komuro, M., and Matsumoto, T. (1986) The double scroll family. IEEE Transactions on Circuits and Systems, 33,1072-1118.
35. Cruz, J.M. and Chua, L.O. (1993) An IC Chip of Chua's circuit. IEEE Transactions on Circuits and Systems-II, 10,596-613.
36. Cui, W., Chau, K.T., Wang, Z., and Jiang, J.Z. (2006) Application of chaotic modulation to ac motors for harmonic suppression. Proceedings of IEEE International Conference on Industrial Technology, pp. 2343-2347.
37. Cuomo, K.M. and Oppenheim, A.V. (1993) Circuit implementation of synchronized chaos with applications to communications. Physical Review Letters, 71,65-68.
38. Deane, J.H.B. (1992) Chaos in a current-mode controlled boost DC-DC converter. IEEE Transactions on Circuits and Systems-I: Fundamental Theory and Applications, 39,680-683.
39. Deane, J.H.B. and Hamill, D.C. (1990) Instability, subharmonics, and chaos in power electronic systems. IEEE Transactions on Power Electronics, 5,260-268.
40. Deane, J.H.B. and Hamill, D.C. (1996) Improvement of power supply EMC by chaos. Electronics Letters, 32,1045.
41. Dedieu, H.,Kennedy, M.P., and Hasler,M. (1993) Chaos shift keying: modulation and demodulation of a chaotic carrier using self-synchronizing Chua's circuits. IEEE Transactions on Circuits and Systems-II, 40,634-642.
42. Di Bernardo, M. and Tse, C.K. (2002) Chaos in power electronics: an overview, in Chaos in Circuits and Systems (eds G. Chen and T. Ueta) World Scientific, Hong Kong.
43. Di Bernardo, M., Garofalo, F., Glielmo, L., and Vasca, F. (1998) Switchings, bifurcations, and chaos in DC/DC converters. IEEE Transactions on Circuits and Systems-I: Fundamental Theory and Applications, 45,133-141.
44. Ditto, W. and Munakata, T. (1995) Principles and applications of chaotic systems. Communications of the ACM, 38,96-102.
45. Endo, T. and Chua, L.O. (1988) Chaos from phase-locked loops. IEEE Transactions on Circuits and Systems, 35,987-1003.
46. Endo, T., Chua, L.O., and Narita, T. (1989) Chaos from phase-locked loops: High-dissipation case. IEEE Transactions on Circuits and Systems, 36,255-263.
47. Feigenbaum, M.J. (1978) Quantitative universality for a class of nonlinear transformations. Journal of Statistical Physics, 19,25-52.
48. Feng, J.C. and Tse, C.K. (2001) On-line adaptive chaotic demodulator based on radial-basis-function neural networks. Physical Review E, 63,026202:1-026202:10.
49. Fossas, E. and Olivar, G. (1996) Study of chaos in the buck converter. IEEE Transactions on Circuits and Systems-I: Fundamental Theory and Applications, 43,13-25.
50. Galias, Z. and Maggio, G.M. (2001) Quadrature chaos-shift keying: theory and performance analysis. IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, 48,1510-1519.
51. Gandhi, G., Cserey, G., Zbrozek, J., and Roska, T. (2009) Anyone can build Chua's circuit: hands-on-experience with chaos theory for high school students. International Journal of Bifurcation and Chaos, 19,1113-1125.
52. Gao, Y. and Chau, K.T. (2002) Chaotification of permanent-magnet synchronous motor drives using time-delay feedback. IEEE Industrial Electronics Conference, pp. 762-766.
53. Gao, Y. and Chau, K.T. (2003a) Chaotification of induction motor drives under periodic speed command. Electric Power Components and Systems, 31,1083-1099.
54. Gao, Y. and Chau, K.T. (2003b) Design of permanent magnets to avoid chaos in PM synchronous machines. IEEE Transactions on Magnetics, 39,2995-2997.
55. Gao,Y. and Chau, K.T. (2004a) Hopf bifurcation and chaos in synchronous reluctance motor drives. IEEE Transactions on Energy Conversion, 19,296-302.
56. Gao, Y. and Chau, K.T. (2004b) Design of permanent magnets to avoid chaos in doubly salient PM machines. IEEE Transactions on Magnetics, 40,3048-3050.
57. Gao, Y., Chau, K.T., and Ye, S. (2005) A novel chaotic-speed single-phase induction motor drive for cooling fans. Proceedings of IEEE Industry Applications Society Annual Meeting, pp. 1337-1341.
58. Hamdan, A.M.A., Nayfeh, M.A., and Nayfeh, A.H. (1990) Nonlinear analysis of a single-machine-quasi-infinitebusbar system. Proceedings of IEEE Southeastcon, pp. 140-144.
59. Hamill, D.C. and Jefferies, D.J. (1988) Subharmonics and chaos in a controlled switched-mode power converter. IEEE Transactions on Circuits and Systems, 35,1059-1061.
60. Hamill, D.C., Deane, J.H.B., and Jefferies, D.J. (1992) Modeling of chaotic DC-DC converters by iterated nonlinear mappings. IEEE Transactions on Power Electronics, 7,25-36.
61. Hemati, N. (1994) Strange attractors in brushless DC motors. IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, 41,40-45.
62. Hilborn, R.C. (1994) Chaos and Nonlinear Dynamics, Oxford University Press, Oxford, UK.
63. Huang, J.F., Chen, J.H., and Chau, K.T. (2005) Chaoization of switched reluctance motor drives. Proceedings of International Conference on Electrical Machines and Systems, pp. 504-508.
64. Ito, S. and Narikiyo, T. (1998) Abrasive machining under wet condition and constant pressure using chaotic rotation (in Japanese). Journal of the Japan Society for Precision Engineering, 64,748-752.
65. Itoh, M. and Murakami, H. (1995) New communication systems via chaotic synchronizations and modulations. IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, E78-A, 285-290.
66. Ivan, C. and Serbanescu, A. (2009) Applications of nonlinear time-series analysis in unstable periodic orbits identification-Chaos control in buck converter. Proceedings of International Symposium on Signals, Circuits and Systems, pp. 1-4.
67. Kavitha, A. and Uma, G. (2008) Control of chaos by resonant parametric perturbation in a current mode controlled buck-boost DC-DC converter. Proceedings of IEEE Applied Power Electronics Conference and Exposition, pp. 323-327.
68. Kocarev, L. and Chua, L.O. (1993) On chaos in digital filters: Case b=-1. IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 40,404-407.
69. Kocarev, L. and Parlitz, U. (1993) General approach for chaotic synchronization with applications to communication. Physical Review Letters, 74,5028-5031.
70. Kocarev, L., Halle, K.S., Eckert, K. et al. (1992) Experimental demonstration of secure communications via chaotic synchronization. International Journal of Bifurcation and Chaos, 2,709-713.
71. Kolumbán, G. andKennedy, M.P. (2000) Digital communications using chaos, in Controlling Chaos and Bifurcation in Engineering Systems (ed. G. Chen) CRC Press, Boca Raton, FL.
72. Kolumbán, G., Jako, Z., and Kennedy, M.P. (1999) Enhanced versions of DCSK and FM-DCSK data transmission systems. Proceedings of IEEE International Symposium on Circuits and Systems, pp. 475-478.
73. Kolumbán, G., Kennedy, M.P., and Chua, L.O. (1998) The role of synchronization in digital communications using chaos-Part II: Chaotic modulation and chaotic synchronization. IEEE Transactions on Circuits and Systems-I, 45,1129-1140.
74. Kolumbán, G., Kennedy, M.P., and Kis, G. (1997) Performance improvement of chaotic communications systems. Proceedings of European Conference on Circuit Theory and Design, pp. 284-289.
75. Kolumbán, G.,Vizvari, B., Schwarz,W., and Abel, A. (1996) Differential chaos shift keying:Arobust coding for chaos communications. Proceedings of International SpecialistWorkshop on Nonlinear Dynamics of Electronics Systems, pp. 87-92.
76. Krein, P.T. and Bass, R.M. (1990) Types of instability encountered in simple power electronic circuits: unboundedness, chattering, and chaos. Proceedings of IEEE Applied Power Electronics Conference, pp. 191-194.
77. Kuroe, Y. and Hayashi, S. (1989) Analysis of bifurcation in power electronic induction motor drive systems. Proceedings of IEEE Power Electronics Specialists Conference, pp. 923-930.
78. Lau, F.C.M. and Tse, C.K. (2003) Chaos-Based Digital Communication Systems, Springer-Verlag, NY.
79. Lee, B. and Ajjarapu, V. (1993) Period-doubling route to chaos in an electrical power system. IEE Proceedings C-Generation, Transmission and Distribution, 140,490-496.
80. Li, T.Y. and Yorke, J.A. (1975). Period three implies chaos. American Mathematical Monthly, 82,985-92.
81. Li, Z., Park, J.B., Joo, Y.H. et al. (2002) Bifurcations and chaos in a permanent-magnet synchronous motor. IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, 49,383-387.
82. Liao, G.C. and Tsao, T.P. (2004) A novel GA-based and meta-heuristics method for short-term unit commitment problem. Proceedings of IEEE Power Engineering Society General Meeting, pp. 1088-1093.
83. Liu, H. (1998) The Semantics and Philosophy of Chaos (in Chinese), Hunan Education Press, Changsha, China.
84. Liu, S., Wang, M., and Hou, Z. (2003) Hybrid algorithm of chaos optimisation and SLP for optimal power flow problems with multimodal characteristic. IEE Proceedings-Generation, Transmission and Distribution, 150,543-547.
85. Liu, Y. and Tang, W.K.S. (2008) Cryptanalysis of chaotic masking secure communication systems using an adaptive observer. IEEE Transactions on Circuits and Systems-II: Express Briefs, 55,1183-1187.
86. Long,Y.J. (2001) Chaotic dynamics and compaction engineering. Proceedings of International Conference on Soft Soil Engineering, pp. 143-147.
87. Lorenz, E.N. (1963) Deterministic nonperiodic flow. Journal of the Atmospheric Sciences, 20,130-141.
88. Lori{dotless}á, A. (2009) Robust linear control of (chaotic) permanent-magnet synchronous motors with uncertainties. IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, 56,2109-2122.
89. Macchi, O. and Jaidane-Saidane, M. (1989) Adaptive IIR filtering and chaotic dynamics: application to audiofrequency coding. IEEE Transactions on Circuits and Systems, 36,591-599.
90. Mamishev, A.V., Russell, B.D., and Benner, C.L. (1996) Analysis of high impedance faults using fractal techniques. IEEE Transactions on Power Systems, 11,435-440.
91. Mandelbrot, B.B. (1982) The Fractal Geometry of Nature, Freeman, San Francisco.
92. Matsumoto, T. (1984) A chaotic attractor from Chua's circuit. IEEE Transaction on Circuits and Systems, 31,1055-1058.
93. Matsumoto, T., Chua, L., and Kobayashi, K. (1986) Hyperchaos: Laboratory experiment and numerical confirmation. IEEE Transactions on Circuits and Systems, 33,1143-114.
94. May, R.M. (1974) Biological populations with non-overlapping generations: stable points, stable cycles, and chaos. Science, 186,645-647.
95. May, R.M. (1976) Simple mathematical models with very complicated dynamics. Nature, 261,459-467.
96. Milanović, V. and Zaghloul, M.E. (1996) Improved masking algorithm for chaotic communications systems. Electronics Letters, 32,11-12.
97. Min, X., Xu, W., Wang, L., and Chen, G. (2010) Promising performance of a frequency-modulated differential chaos shift keying ultra-wideband system under indoor environments. IET Communications, 4,125-134.
98. Mishina, T., Kohmoto, T., and Hashi, T. (1985) Simple electronic circuit for the demonstration of chaotic phenomena. American Journal of Physics, 53,332-334.
99. Mori, H. and Urano, S. (1996) Short-term load forecasting with chaos time series analysis. Proceedings of International Conference on Intelligent Systems Applications to Power Systems, pp. 133-137.
100. Nagashima, H. and Baba, Y. (1999) Introduction to Chaos: Physics and Mathematics of Chaotic Phenomena, Institute of Physics Publishing, Bristol, UK.
101. Nagy, I. (1994) Tolerance band based current control of induction machines highlighted with the theory of chaos. Proceedings of International Power Electronics Congress, pp. 155-160.
102. Niu, X. and Qiu, J. (2002) Investigation of torsional instability, bifurcation, and chaos of a generator set. IEEE Transactions on Energy Conversion, 17,164-168.
103. Okuno, H., Takeshita, M., and Kanari, Y. (2002) OGY control by asymptotically transition method in power system. Proceedings of SICE Annual Conference, pp. 3163-3168.
104. Ott, E., Grebogi, C., and Yorke, J.A. (1990) Controlling chaos. Physical Review Letter, 64,1196-1199.
105. Parlitz, U., Chua, L.O., Kocarev, L. et al. (1992) Transmission of digital signals by chaotic synchronization. International Journal of Bifurcation and Chaos, 2,973-977.
106. Poddar, G., Chakrabarty, K., and Banerjee, S. (1998) Control of chaos in DC-DC converters. IEEE Transactions on Circuits and Systems-I: Fundamental Theory and Applications, 45,672-676.
107. Poincaré, J.H. (1996) Science and Method, (Reprint of 1914 Edition), Routledge/Thoemmes Press, London, UK.
108. Ren, H. and Liu, D. (2006) Nonlinear feedback control of chaos in permanent magnet synchronous motor. IEEE Transactions on Circuits and Systems II: Express Briefs, 53,45-50.
109. Rodríguez-Vázquez, A., Huertas, J.L., and Chua, L.O. (1985) Chaos in a switched-capacitor circuit. IEEE Transactions on Circuits and Systems, 32,1083-1085.
110. Saito, T. (1985) A chaos generator based on a quasi-harmonic oscillator. IEEE Transactions on Circuits and Systems, 32,320-331.
111. Schiff, S.J., Jerger, K., Duong, D.H. et al. (1994) Controlling chaos in the brain. Nature, 370,615-620.
112. Shinriki, M.,Yamamoto, M., and Mori, S. (1981) Multimode oscillations in a modified van Der Pol oscillator containing a positive nonlinear conductance. Proceedings of IEEE, 69,394-395.
113. Simpson, J. (2004) Oxford English Dictionary Online, Oxford University Press, Oxford, UK.
114. Song, Y. and Yu, X. (2000) Multi-parameter modulation for secure communication via Lorenz chaos. Proceedings of IEEE Conference on Decision and Control, pp. 42-45.
115. Srivastava, K.N. and Srivastava, S.C. (1998). Elimination of dynamic bifurcation and chaos in power systems using FACTS devices. IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, 45,72-78.
116. Sushchik, M., Tsimring, L.S., and Volkovskii, A.R. (2000) Performance analysis of correlation-based communication schemes utilizing chaos. IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, 47,1684-1691.
117. Süto, Z., Nagy, I., and Masada, E. (2000) Period adding route to chaos in a hysteresis current controlled AC drive. Proceedings of International Workshop on Advanced Motion Control, pp. 299-304.
118. Suzuki, R. and Yasuda, K. (1998) Analysis of chatter vibration in an automotive wiper assembly. JSME International Journal, Series C, 41,616-620.
119. Tang, Y., Mees, A., and Chua, L. (1983) Synchronization and chaos. IEEE Transactions on Circuits and Systems, 30,620-626.
120. Tao, Y. and Chua, L.O. (1996) Secure communication via chaotic parameter modulation. IEEE Transactions on Circuits and Systems-II, 43,817-819.
121. Tse, C.K. (1994) Chaos from a buck switching regulator operating in discontinuous mode. International Journal of Circuit Theory and Applications, 22,263-278.
122. Tse, C.K., Fung, S.C., and Kwan, M.W. (1996) Experimental confirmation of chaos in a current-programmed Ć uk converter. IEEE Transactions on Circuits and Systems-I: Fundamental Theory and Applications, 43,605-608.
123. Tse, K.K., Ng, R.W.-M., Chung, H.S.-H., and Hui, S.Y.R. (2003) An evaluation of the spectral characteristics of switching converters with chaotic carrier-frequency modulation. IEEE Transactions on Industrial Electronics, 50,171-182.
124. Ueda, Y. (1992) The Road to Chaos, Aerial Press, Santa Cruz, California.
125. Van Wyk, M.A. and Steeb, W.-H. (1997) Chaos in Electronics, Kluwer Academic Publishers, Netherlands.
126. Wang, Z. and Chau, K.T. (2006) Stabilization of chaotic vibration in automobile wiper systems. Proceedings of Asia International Symposium on Mechatronics, pp. DS-02:1-DS-02:6.
127. Wang, Z. and Chau, K.T. (2007) Design and analysis of a chaotic PWM inverter for electric vehicles. Proceedings of IEEE Industry Applications Society Annual Meeting, pp. 1954-1961.
128. Wang, Z. and Chau, K.T. (2008) Anti-control of chaos of a permanent magnet DC motor system for vibratory compactors. Chaos, Solitons and Fractals, 36,694-708.
129. Wang, Z. and Chau, K.T. (2009a) Control of chaotic vibration in automotive wiper systems. Chaos, Solitons and Fractals, 39,168-181.
130. Wang, Z. and Chau, K.T. (2009b) Design, analysis and experimentation of chaotic permanent magnet DC motor drives for electric compaction. IEEE Transactions on Circuits and Systems II: Express Briefs, 56,245-249.
131. Wang, Z., Chau, K.T., and Jian, L. (2008a) Chaoization of permanent magnet synchronous motors using stator flux regulation. IEEE Transactions on Magnetics, 44,4151-4154.
132. Wang, Z., Chau, K.T., and Cheng, M. (2008b)AchaoticPWMmotor drive for electric propulsion. Proceedings of IEEE Vehicle Power and Propulsion Conference, pp. H08357:1-H08357:6.
133. Wang, Z., Chau, K.T., and Liu, C. (2007) Improvement of electromagnetic compatibility of motor drives using chaotic PWM. IEEE Transactions on Magnetics, 43,2612-2614.
134. Wildberger, M. (1994) Stability and nonlinear dynamics in power systems. IEEE Power Engineering Review, 14,16-18.
135. Wood, J.R. (1989) Chaos: a real phenomenon in power electronics. Proceedings of IEEE Applied Power Electronics Conference, pp. 115-123.
136. Ye, S. and Chau, K.T. (2005a) Destabilization control of a chaotic motor for industrial mixers. Proceedings of IEEE Industry Applications Society Annual Meeting, pp. 1724-1730.
137. Ye, S. and Chau, K.T. (2005b) Design of permanent magnets to chaoize PM synchronous motors for industrial mixer. Proceedings of IEEE International Magnetics Conference, pp. 723-724.
138. Ye, S. and Chau, K.T. (2007) Chaoization of DC motors for industrial mixing. IEEE Transactions on Industrial Electronics, 54,2024-2032.
139. Ye, S., Chau, K.T., and Niu, S. (2006) Chaoization of a single-phase induction motor for washing machines. Proceedings of IEEE Industry Applications Society Annual Meeting, pp. 855-860.
140. Yuan, G.H., Banerjee, S., Ott, E., and Yorke, J.A. (1998) Border collision bifurcation in the buck converter. IEEE Transactions on Circuits and Systems-I: Fundamental Theory and Applications, 45,707-716.
141. Zhong, G.Q. and Ayrom, F. (1985) Experimental confirmation of chaos from Chua's circuit. International Journal of Circuit Theory and Applications, 13,93-98.
142. Zhou,Y., Tse, C.K., Qiu, S.S., and Lau, F.C.M. (2003) Applying resonant parametric perturbation to control chaos in the buck DC/DC converter with phase shift and frequency mismatch considerations. International Journal of Bifurcation and Chaos, 13,3459-3471.
143. Zou, F. and Nossek, J.A. (1991) A chaotic attractor with cellular neural networks. IEEE Transactions on Circuits and Systems, 38,811-812.
144. Banerjee, S. and Verghese, G.C. (2001) Nonlinear Phenomena in Power Electronics, IEEE Press, New York.
145. Benettin, G., Galgani, L., and Strelcyn, J.M. (1976) Kolmogorov entropy and numerical experiments. Physical Review A, 14,2338-2345.
146. Cellucci, C.J., Albano, A.M., Rapp, P.E. et al. (1997) Detecting noise in a time series. Chaos, 7,414-422.
147. Chan, C.C., Jiang, J.Z., Xia,W., and Chau, K.T. (1995) Novel wide range speed control of permanent magnet brushless motor drives. IEEE Transactions on Power Electronics, 10,539-546.
148. Chan, C.C., Jiang, Q., Zhan, Y.J., and Chau, K.T. (1996) A high-performance switched reluctance drive for P-star EV project. Proceedings of 13th International Electric Vehicle Symposium, pp. 78-83.
149. Chau, K.T., Ching, T.W., Chan, C.C., and Chan, D.T.W. (1997) A novel two-quadrant zero-voltage transition converter for DC motor drives. Proceedings of IEEE International Conference on Industrial Electronics, pp. 517-522.
150. Chau, K.T., Sun, Q., Fan, Y., and Cheng, M. (2005) Torque ripple minimization of doubly salient permanent magnet motors. IEEE Transaction on Energy Conversion, 20,352-358.
151. Cheng, M., Chau, K.T., and Chan, C.C. (2001) Design and analysis of a new doubly salient permanent magnet motor. IEEE Transaction on Magnetics, 37,3012-3020.
152. Cheng, M., Chau, K.T., and Chan, C.C. (2003) New split-winding doubly salient permanent magnet motor drive. IEEE Transaction on Aerospace Electronic Systems, 39,202-210.
153. Ching, T.W., Chau, K.T., and Chan, C.C. (1998) Anewzero-voltage-transition converter for switched reluctance motor drives. Proceedings of IEEE Power Electronics Specialists Conference, pp. 1295-1301.
154. Cho, J.G., Kim,W.H., Rim, G.H., and Cho, K.Y. (1997) Novel zero transition PWM converter for switched reluctance motor drives. Proceedings of IEEE Power Electronics Specialists Conference, pp. 887-891.
155. Cruickshank, A.J.O., Anderson, A.F., and Menzies, R.W. (1971) Theory and performance of reluctance motors with axially laminated anisotropic rotors. Proceedings of IEE, 118,887-894.
156. Deodhar, R.P., Andersson, S., Boldea, I., and Miller, T.J.E. (1997) The flux-reversal machine: a new brushless doublysalient permanent magnet machine. IEEE Transaction on Industry Applications, 33,925-934.
157. Ding, M.Z., Grebogi, C., and Ott, E. (1989) Evolution of attractors in quasiperiodically forced systems: from quasiperiodic to strange nonchaotic to chaotic. Physical Review A, 39,2593-2598.
158. Ditto, W.L., Spano, M.L., Savage, H.T. et al. (1990) Experimental observation of a strange nonchaotic attractor. Physical Review Letters, 65,533-536.
159. Divan, D.M. (1986) The resonant DC link converter-a new concept in static power conversion. Proceedings of IEEE Industry Application Society Annual Meeting, pp. 648-656.
160. Eckmann, J.P. and Ruelle, D. (1985) Ergodic theory of chaos and strange attractors. Reviews of Modern Physics, 57,617-656.
161. Farmer, J.D. (1982) Chaotic attractors of an infinite-dimensional dynamical system. Physica D, 4,366-393.
162. Gan, J., Chau, K.T., Chan, C.C., and Jiang, J.Z. (2000) A new surface-inset, permanent-magnet, brushless DC motor drive for electric vehicles. IEEE Transactions on Magnetics, 36,3810-3818.
163. Grassberger, P. and Procaccia, I. (1983a) Characterization of strange attractors. Physics Review Letters, 50,346-349.
164. Grassberger, P. and Procaccia, I. (1983b) Measuring the strangeness of strange attractors. Physica D, 9,189-208.
165. Grebogi, C., Ott, E., Pelikan, S., and Yorke, J.A. (1984) Strange attractors that are not chaotic. Physica D, 13,261-268.
166. Kim, Y., Kook, Y., and Ko, Y. (1997)A new technique of reducing torque ripples for BDCMdrives. IEEE Transactions on Industrial Electronics, 44,735-739.
167. Kolmogorov, A.N. (1958) A new invariant for transitive dynamical systems. Doklady Akademii Nauk SSSR, 119,861-864.
168. Kostko, J.K. (1923) Polyphase reaction synchronous motors. Journal of American Institute of Electrical Engineers, 42,1162-1168.
169. Lawrenson, P.J. and Gupta, S.K. (1967) Developments in the performance and theory of segmental-rotor reluctance motors. Proceedings of IEE, 114,645-653.
170. Matsuo, T. and Lipo, T.A. (1994) Rotor design optimization of synchronous reluctance machine. IEEE Transaction on Energy Conversion, 9,359-365.
171. Muller, P.C. (1995) Calculation of Lyapunov exponents for dynamic systems with discontinuities. Chaos, Solitons and Fractals, 5,1671-1681.
172. Ott, E. (1993) Chaos in Dynamical Systems, Cambridge University Press, Cambridge.
173. Parker, T.S. and Chua, L.O. (1999) Practical Numerical Algorithms for Chaotic Systems, Springer Verlag, New York.
174. Pawelzik, K. and Schuster, H.G. (1991) Unstable periodic orbits and prediction. Physical Review A, 43,1808-1812.
175. Pesin,Ya.B. (1977) Characteristic Lyapunov exponents and smooth ergodic theory. Russian Mathematical Surveys, 32,55-114.
176. Rosenstein, M.T., Collins, J.J., and De Luca, C.J. (1993)Apractical method for calculating largestLyapunov exponents from small data sets. Physica D, 65,117-134.
177. Shimada, I. and Nagashima, T. (1979) A numerical approach to ergodic problem of dissipative dynamical systems. Progress of Theoretical Physics, 61,1605-1616.
178. Soong, W.L. and Ertugrul, N. (2002) Field-weakening performance of interior permanent-magnet motors. IEEE Transactions on Industry Applications, 38,1251-1258.
179. Sprott, J.C. (2003) Chaos and Time-Series Analysis, Oxford University Press, Oxford.
180. Takens, F. (1980) Detecting strange attractors in turbulence, in Dynamical Systems and Turbulence, Lecture Notes in Mathematics, 898 (eds D.A. Rand, and L.-S. Young), Springer-Verlag, pp. 366-381.
181. Uddin, M.N. and Rahman, M.A. (2007) High-speed control of IPMSM drives using improved fuzzy logic algorithms. IEEE Transactions on Industrial Electronics, 54,190-199.
182. Valsakumar, M.C., Satyanarayana, S.V.M., and Sridhar, V. (1997) Signature of chaos in power spectrum. Pramana Journal of Physics, 48,69-85.
183. Wang, Y., Chau, K.T., Chan, C.C., and Jiang, J.Z. (2002) Design and analysis of a new multiphase polygonal-winding permanent-magnet brushless dc machine. IEEE Transactions on Magnetics, 38,3258-3260.
184. Wolf, A., Swift, J.B., Swinney, H.L., and Vastano, J.A. (1985) Determining Lyapunov exponents from a time series. Physica D, 16,285-317.
185. Xu, L., Xu, X., Lipo, T.A., and Novotny, D.W. (1991) Vector control of a synchronous reluctance motor including saturation and iron loss. IEEE Transactions on Industry Applications, 27,977-985.
186. Yang, T. and Bilimgut, K. (1997) Experimental results of strange nonchaotic phenomenon in a second-order quasiperiodically forced electronic circuit. Physics Letters A, 236,494-499.
187. Zhan, Y.J., Chan, C.C., and Chau, K.T. (1999) A novel sliding-mode observer for indirect position sensing of switched reluctance motor drives. IEEE Transactions on Industrial Electronics, 46,390-397.
188. Zhou, T. and Moss, F. (1992) Observation of a strange nonchaotic attractor in a multistable potential. Physical Review A, 45,5394-5400.
189. Zhu, Z.Q. and Howe, D. (2007) Electrical machines and drives for electric, hybrid and fuel cell vehicles. IEEE Proceedings, 95,746-765.
190. Zhu, Z.Q., Chen,Y.S., and Howe, D. (2000) On-line optimal field weakening control of permanent magnet brushless ac drives. IEEE Transactions on Industry Applications, 36,1661-1668.
191. Zhu, Z.Q., Pang, Y., Howe, D. et al. (2005) Analysis of electromagnetic performance of flux-switching permanent magnet machines by non-linear adaptive lumped parameter magnetic circuit model. IEEE Transaction on Magnetics, 41,4277-4287.
192. Chau, K.T., Chen, J.H., Chan, C.C. et al. (1997a) Chaotic behavior in a simple DC drive. Proceedings of IEEE Power Electronics and Drive Systems Conference, pp. 473-479.
193. Chau, K.T., Chen, J.H., and Chan, C.C. (1997b) Dynamic bifurcation in DC drives. Proceedings of IEEE Power Electronics Specialists Conference, pp. 1330-1336.
194. Chau, K.T., Chen, J.H., Chan, C.C., and Chan, D.T.W. (1997c) Modeling of subharmonics and chaos in DC motor drives. Proceedings of IEEE International Industrial Electronics Conference, pp. 523-528.
195. Chen, J.H., Chau, K.T., and Chan, C.C. (2000a) Chaos in voltage-mode controlled DC drive systems. International Journal of Electronics, 86,857-874.
196. Chen, J.H., Chau, K.T., and Chan, C.C. (2000b) Analysis of chaos in current-mode controlled dc drive systems. IEEE Transactions on Industrial Electronics, 47,67-76.
197. Deane, J.H.B. (1992) Chaos in a current-mode controlled boost DC-DC converter. IEEE Transactions on Circuits and Systems-I: Fundamental Theory and Applications, 39,680-683.
198. Hamill, D.C. and Jefferies, D.J. (1988) Subharmonics and chaos in a controlled switched-mode power converter. IEEE Transactions on Circuits and Systems, 35,1059-1061.
199. Hamill, D.C., Deane, J.H.B., and Jefferies, D.J. (1992) Modeling of chaotic DC-DC converters by iterated nonlinear mappings. IEEE Transactions on Power Electronics, 7,25-36.
200. Parker, T.S. and Chua, L.O. (1987) Chaos: a tutorial for engineers. Proceedings of IEEE, 75,982-1008.
201. Parker, T.S. and Chua, L.O. (1989) Practical Numerical Algorithm for Chaotic Systems, Springer-Verlag, New York.
202. Sugiura, K. and Hori, Y. (1996) Vibration suppression in 2-and 3-mass system based on the feedback of imperfect derivative of the estimated torsional torque. IEEE Transactions on Industrial Electronics, 43,56-64.
203. Tse, C.K., Fung, S.C., and Kwan, M.W. (1996) Experimental confirmation of chaos in a current-programmed Ć uk converter. IEEE Transactions on Circuits and Systems-I: Fundamental Theory and Applications, 43,605-608.
204. Alligood, K.T., Sauer, T.D., and Yorke, J.A. (1996) Chaos: An Introduction to Dynamical Systems, Springer-Verlag, New York.
205. Betz, R.E., Lagerquist, R., Jovanovic, M. et al. (1993) Control of synchronous reluctance machines. IEEE Transactions on Industry Applications, 29,1110-1122.
206. Fitzgerald, A.E., Kingsley, C. Jr., and Umans, S.D. (1991) Electric Machinery, McGraw-Hill, Singapore.
207. Gao, Y. and Chau, K.T. (2003a) Chaotification of induction motor drives under periodic speed command. Electric Power Components and Systems, 31,1083-1099.
208. Gao, Y. and Chau, K.T. (2003b) Design of permanent magnets to avoid chaos in PM synchronous machines. IEEE Transactions on Magnetics, 39,2995-2997.
209. Gao, Y. and Chau, K.T. (2004) Hopf bifurcation and chaos in synchronous reluctance motor drives. IEEE Transactions on Energy Conversion, 19,296-302.
210. Gieras, J.F. and Wing, M. (2002) Permanent Magnet Motor Technology: Design and Applications, Marcel Dekker, New York.
211. Hilborn, R.C. (1994) Chaos and Nonlinear Dynamics: An Introduction for Scientists and Engineers, Oxford University Press, Oxford.
212. Leonhard, W. (1996) Control of Electrical Drives, Springer-Verlag, New York.
213. Lipo, T.A. (1991) Synchronous reluctance machines-a viable alternative forAC drives? Electric Machines and Power Systems, 19,659-671.
214. Matsuo, T. and Lipo, T.A. (1993) Field oriented control of synchronous reluctance machine. Proceedings of IEEE Power Electronics Specialists Conference, pp. 425-431.
215. Parker, T.S. and Chua, L.O. (1989) Practical Numerical Algorithms for Chaotic Systems, Springer-Verlag, New York.
216. Sharaf-Eldin, T., Dunnigan, M.W., Fletcher, J.E., and Williams, B.W. (1999) Nonlinear robust control of a vectorcontrolled synchronous reluctance machine. IEEE Transactions on Power Electronics, 14,1111-1121.
217. Thompson, J.M.T. and Stewart, H.B. (2002) Nonlinear Dynamics and Chaos, Wiley, New York.
218. Ye, S. and Chau, K.T. (2005) Design of permanent magnets to chaoize PM synchronous motors for industrial mixer. Proceedings of IEEE International Magnetics Conference, pp. 723-724.
219. Chan, C.C., Jiang, Q., Zhan, Y.J., and Chau, K.T. (1996) A high-performance switched reluctance drive for P-star EV project. Proceedings of International Electric Vehicle Symposium, pp. 78-83.
220. Chen, J.H., Chau, K.T., Chan, C.C., and Jiang, Q. (2002) Subharmonic and chaos in switched reluctance motor drives. IEEE Transactions on Energy Conversion, 17,73-78.
221. De Castro, M.R., Robert, B.G.M., and Goeldel, C. (2008) Bifurcations and chaotic dynamics in a linear switched reluctance motor. Proceedings of International Power Electronics and Motion Control Conference, pp. 2126-2133.
222. Lawrenson, P.J. (1992) A brief status review of switched reluctance drives. EPE Journal, 2,133-144.
223. Miller, T.J.E. (1993) Switched Reluctance Motors and Their Control, Magna Physics Publishing and Clarendon Press, Oxford.
224. Parker, T.S. and Chua, L.O. (1989) Practical Numerical Algorithms for Chaotic Systems, Springer-Verlag, New York.
225. Stephenson, J.M. and Corda, J. (1979) Computation of torque and current in doubly salient reluctance motors from nonlinear magnetisation data. IEE Proceedings-B, 126,393-396.
226. Wiggins, S. (1990) Introduction to Applied Nonlinear Dynamical Systems and Chaos, Springer-Verlag, New York.
227. Zhan, Y.J., Chan, C.C., and Chau, K.T. (1999) A novel sliding mode observer for indirect position sensing of switched reluctance motor drives. IEEE Transactions on Industrial Electronics, 46,390-397.
228. Zhusubaliyev, Z.T. and Mosekilde, E. (2003) Bifurcations and Chaos in Piecewise-Smooth Dynamical Systems,World Scientific Publishing Company, Singapore.
229. Boccaletti, S., Farini, A., and Arecchi, F.T. (1997) Adaptive strategies for recognition, control and synchronization of chaos. Chaos, Solitons and Fractals, 8,1431-1448.
230. Casas, F. and Grebogi, C. (1997) Control of chaotic impacts. International Journal of Bifurcation and Chaos, 7,951-955.
231. Harb, A.M. (2004) Nonlinear chaos control in a permanent magnet reluctance machine. Chaos, Solitons, and Fractals, 19,1217-1224.
232. Hemati, N. (1994) Strange attractors in brushless DC motors. IEEE Transactions on Circuits and Systems-I: Fundamental Theory and Applications, 41,40-45.
233. Hunt, E.R. (1991) Stabilizing high-period orbits in a chaotic system-the diode resonator. Physics Review Letters, 67,1953-1955.
234. Hirasawa, K., Wang, X.F., Murata, J. et al. (2000) Universal learning network and its application to chaos control. Neural Networks, 13,239-253.
235. Jackson, E.A. and Grosu, I. (1995) An OPCL control of complex dynamic systems. Physica D, 85,1-9.
236. Khovanov, I.A., Luchinsky, D.G., Mannella, R., and McClintock, P.V.E. (2000) Fluctuations and the energy-optimal control of chaos. Physics Review Letters, 85,2100-2103.
237. Kittel, A., Parisi, J., and Pyragas, K. (1995) Delayed feedback control of chaos by self-adapted delay time. Physics Letters A, 198,433-436.
238. Liao, T.L. and Lin, S.H. (1999) Adaptive control and synchronization of Lorenz systems. Journal of Franklin Institute-Engineering and Applied Mathematics, 226,925-937.
239. Ott, E., Grebogi, C., and Yorke, J.A. (1990) Controlling chaos. Physical Review Letters, 64,1196-1199.
240. Poznyak, A.S., Yu, W., and Sanchez, E.N. (1999) Identification and control of unknown chaotic system via dynamic neural networks. IEEE Transactions on Circuits and Systems-I: Fundamental Theory and Applications, 46,1491-1495.
241. Pyragas, K. (1992) Continuous control of chaos by self-controlling feedback. Physics Letters A, 170,421-428.
242. Rajasekar, S., Murali, K., and Lakshmanan, M. (1997) Control of chaos by nonfeedback methods in a simple electronic circuit system and the FitzHugh-Nagumo equation. Chaos, Solitons and Fractals, 8,1545-1558.
243. Ramesh, M. and Narayanan, S. (1999) Chaos control by nonfeedback methods in the presence of noise. Chaos, Solitons and Fractals, 10,1473-1489.
244. Ren, H. and Liu, D. (2006) Nonlinear feedback control of chaos in permanent magnet synchronous motor. IEEE Transactions on Circuits and Systems-II: Express Briefs, 53,45-50.
245. Tanaka, K., Ikeda, T., and Wang, H.O. (1998)A unified approach to controlling chaos via arm LMI-based fuzzy control system design. IEEE Transactions on Circuits and Systems-I: Fundamental Theory and Applications, 45,1021-1040.
246. Tian, Y.P. (1999) Controlling chaos using invariant manifolds. International Journal of Bifurcation and Chaos, 72,258-266.
247. Wei, D.Q., Luo, X.S., Wang, B.H., and Fang, J.Q. (2007) Robust adaptive dynamic surface control of chaos in permanent magnet synchronous motor. Physics Letters A, 363,71-77.
248. Yau, H.T. and Yan, J.J. (2004) Design of sliding mode controller for Lorenz chaotic system with nonlinear input. Chaos, Solitons and Fractals, 19,891-898.
249. Cheng, M., Chau, K.T., and Chan, C.C. (2001) Design and analysis of a new doubly salient permanent magnet motor. IEEE Transactions on Magnetics, 37,3012-3020.
250. Desai, B.G. and Mathew, M.A. (1971) Transient analysis of shaded pole motor. IEEE Transactions on Power Apparatus and Systems, PAS-90,484-494.
251. Gao, Y. and Chau, K.T. (2002) Chaotification of permanent-magnet synchronous motor drives using time-delay feedback. Proceedings of IEEE Industrial Electronics Conference, pp. 762-766.
252. Ge, Z.M., Cheng, J.W., and Chen, Y.S. (2004) Chaos anticontrol and synchronization of three time scales brushless DC motor system. Chaos, Solitons and Fractals, 22,1165-1182.
253. Liu, C., Chau, K.T., Jiang, J.Z., and Niu, S. (2008) Comparison of stator-permanent-magnet brushless machines. IEEE Transactions on Magnetics, 44,4405-4408.
254. Moon, F.C. and Holmes, P.J. (1979) A magnetoelastic strange attractor. Journal of Sound Vibration, 65,275-296.
255. Osheiba, A.M., Ahmed, K.A., and Rahman, M.A. (1991) Performance prediction of shaded pole induction motors. IEEE Transactions on Industry Applications, 27,876-882.
256. Strogatz, S.H. (1994) Nonlinear Dynamics and Chaos, Addison-Wesley, Reading, MA.
257. Veinott, C.G. and Martin, J.E. (1987) Fractional and Subfractional Horsepower Electric Motors, McGraw-Hill, New York.
258. Wang, X.F., Chen, G., and Yu, X. (2000) Anticontrol of chaos in continuous-time systems via time-delay feedback. Chaos, 10,771-779.
259. Ye, S. and Chau, K.T. (2007) Chaoization of DC motors for industrial mixing. IEEE Transactions on Industrial Electronics, 54,2024-2032.
260. Chang, S.C. and Lin, H.P. (2004) Chaos attitude motion and chaos control in an automotive wiper system. International Journal of Solids and Structures, 41,3491-3504.
261. Chen, H.H. (2004) Stability and chaotic dynamics of a rate gyro with feedback control under uncertain vehicle spin and acceleration. Journal of Sound and Vibrations, 273,949-968.
262. Chen, J.H., Chau, K.T., Siu, S.M., and Chan, C.C. (2000) Experimental stabilization of chaos in a voltage-mode DC drive system. IEEE Transactions on Circuits and Systems-I: Fundamental Theory and Applications, 47,1093-1095.
263. Franceschini, G., Bose, S., and Scholl, E. (1999) Control of chaotic spatiotemporal spiking by time-delay autosynchronization. Physical Review E, 60,5426-5434.
264. Ge, Z.M. and Chen, H.H. (1998) Double degeneracy and chaos in a rate gyro with feedback control. Journal of Sound and Vibration, 209,753-769.
265. Ge, Z.M. and Lee, C. (2003) Non-linear dynamics and control of chaos for a rotational machine with a hexagonal centrifugal governor with a spring. Journal of Sounds and Vibrations, 262,845-864.
266. Hsu, B.S. and Ling, S.F. (1990)Windshield wiper system design. International Journal of Vehicle Design, 11,63-78.
267. Owen,W.S. and Croft, E.A. (2003) The reduction of stick-slip friction in hydraulic actuators. IEEE/ASMETransactions on Mechatronics, 8,362-371.
268. Park, J., Chang, P.H., Park, H.S., and Lee, E. (2006) Design of learning input shaping technique for residual vibration suppression in an industrial robot. IEEE/ASME Transactions on Mechatronics, 11,55-65.
269. Pyragas, K. (1995) Control of chaos via extended delay feedback. Physics Letters A, 206,323-330.
270. Goto, S., Takahashi, H., and Oya, T. (2001) Clarification of the mechanism of wiper blade rubber squeal noise generation. JSAE Review, 22,57-62.
271. Grenouillat, R. and Leblanc, C. (2002) Simulation of chatter vibrations for wiper systems. Society of Automotive Engineers Papers, 2002-01-1239,1-8.
272. Lévine, J. (2004) On the synchronization of a pair of independent windshield wipers. IEEE Transactions on Control System Technology, 12,787-795.
273. Straete, H.J.V., Degezelle, P., Schutter, J.D., and Belmans, R.J.M. (1998) Servo motor selection criterion for mechatronic applications. IEEE/ASME Transactions on Mechatronics, 3,43-50.
274. Suzuki, R. and Yasuda, K. (1998) Analysis of chatter vibration in an automotive wiper assembly. JSME International Journal Series C, 41,616-620.
275. Ashtari, A., Thomas, G., Kinsner, W., and Flores, B.C. (2003) Sufficient condition for chaotic maps to yield chaotic behavior after FM. IEEE Transactions on Aerospace and Electronic Systems, 39,202-210.
276. Balestra, M., Bellini, A., Callegari, S. et al. (2004) Chaos-based generation of PWM-like signals for low-EMI induction motor drives: analysis and experimental results. IEICE Transactions on Electronics, E87-C, 66-75.
277. Bellini, A., Franceschini, G., Rovatti, R. et al. (2001) Generation of low-EMI PWM patterns for induction drives with chaotic maps. Proceedings of IEEE Industrial Electronics Conference, pp. 1527-1532.
278. Blaabjerg, F., Pedersen, J.K., Oestergaard, L. et al. (1996) Optimized and non-optimized random modulation techniques for VSI drives. EPE Journal, 6,46-53.
279. Bose, B.K. (1990) An adaptive hysteresis-band current control technique of a voltage-fed PWM inverter for machine drive system. IEEE Transactions on Industrial Electronics, 37,402-408.
280. Bowes, S.R. (1975) New sinusoidal pulse width-modulated inverter. IEE Proceedings, 122,1279-1285.
281. Bowes, S.R. and Clements, R.R. (1982) Computer-aided design ofPWMinverter systems. IEE Proceedings-B Electric Power Applications, 129,1-17.
282. Bowes, S.R. and Mount, M.J. (1981) Microprocessor control of PWM inverters. IEE Proceedings-B, Electric Power Applications, 128,293-305.
283. Buja, G.S. and Indri, G.B. (1977) Optimal pulsewidth modulation for feeding AC motors. IEEE Transactions on Industry Applications, 13,38-44.
284. Callegari, S., Rovatti, R., and Setti, G. (2002) Chaotic modulations can outperform random ones in electromagnetic interference reduction tasks. IEE Electronics Letters, 38,543-544.
285. Callegari, S., Rovatti, R., and Setti, G. (2003) Chaos-based FM signals: application and implementation issues. IEEE Transactions on Circuits and Systems I, 50,1141-1147.
286. Cui, W., Chau, K.T., Wang, Z., and Jiang, J.Z. (2006) Application of chaotic modulation to ac motors for harmonic suppression. Proceedings of IEEE International Conference on Industrial Technology, pp. 2343-2347.
287. Delgado-Restituto, M. and Rodíguez-Vázquez, A. (2002) Integrated chaos generators. IEEE Proceedings, 90,747-767.
288. Habetler, T.G. and Divan, D.M. (1991) Acoustic noise reduction in sinusoidalPWMdrives using a randomly modulated carrier. IEEE Transactions on Power Electronics, 6,356-363.
289. Holtz, J. (1992) Pulsewidth modulation-a survey. IEEE Transactions on Industrial Electronics, 39,410-420.
290. Kazmierkowski, M.P. and Malesani, L. (1998) Current control techniques for three-phase voltage-source PWM converters: a survey. IEEE Transactions on Industrial Electronics, 45,691-703.
291. Kazmierkowski, M.P., Dzieniakowski, M.A., and Sulkowski, W. (1991) Novel space vector based current controllers for PWM-inverters. IEEE Transactions on Power Electronics, 6,158-166.
292. Lo,W.C., Chan, C.C., Zhu, Z.Q. et al. (2000) Acoustic noise radiated by PWM-controlled induction machine drives. IEEE Transactions on Industrial Electronics, 47,880-889.
293. Mokrytzki, B. (1967) Pulse-width-modulated inverters for A.C. motor drives. IEEE Transactions, 3,493-503.
294. Nabae, A., Ogasawara, S., and Akagi, H. (1986) A novel control scheme for current-controlled PWM inverters. IEEE Transactions on Industry Applications, 22,697-701.
295. Patel, H.S. and Hoft, R.G. (1973) Generalized techniques of harmonic elimination and voltage control in thyristor inverters. IEEE Transactions on Industry Applications, 9,310-317.
296. Plunkett, A.B. (1979) A current-controlled PWM transistor inverter drive. Proceedings of IEEE Industry Applications Society Annual Meeting, pp. 785-792.
297. Rahman, M.A., Quacioe, J.E., and Chowdhury, M.A. (1987) Performance analysis of delta modulated PWM. IEEE Transactions in Power Electronics, 2,227-233.
298. Ran, L., Gokani, S., Clare, J. et al. (1998a) Conducted electromagnetic emissions in induction motor drive systems-Part I: time domain analysis and identification of dominant modes. IEEE Transactions on Power Electronics, 13,757-767.
299. Ran, L., Gokani, S., Clare, J. et al. (1998b) Conducted electromagnetic emissions in induction motor drive systems-Part II: frequency domain models. IEEE Transactions on Power Electronics, 13,768-776.
300. Setti, G., Mazzini, G., Rovatti, R., and Callegari, S. (2002) Statistical modeling of discrete time chaotic processes: Basic finite dimensional tools and applications. IEEE Proceedings, 90,662-690.
301. Stemmler, H. and Eilinger, T. (1994) Spectral analysis of the sinusoidal PWM with variable switching frequency for noise reduction in inverter-fed induction motors. Proceedings of IEEE Power Electronics Specialists Conference, pp. 269-277.
302. Tímár, P.L. (1989) Noise and Vibration of Electrical Machines, Elsevier Science Publishers, Amsterdam.
303. Trzynadlowski, A.M., Kirlin, R.L., and Legowski, S.F. (1997) Space vector PWM technique with minimum switching losses and a variable pulse rate. IEEE Transactions on Industrial Electronics, 44,173-181.
304. Wang, Z. and Chau, K.T. (2007) Design and analysis of a chaotic PWM inverter for electric vehicles. Proceedings of IEEE Industry Applications Society Annual Meeting, pp. 1954-1961.
305. Wang, Z., Chau, K.T., and Liu, C. (2007) Improvement of electromagnetic compatibility of motor drives using chaotic PWM. IEEE Transactions on Magnetics, 43,2612-2614.
306. Wang, Z., Chau, K.T., and Cheng, M. (2008) A chaoticPWMmotor drive for electric propulsion. Proceedings of IEEE Vehicle Power and Propulsion Conference, pp. 1-6.
307. Ziogas, P.D. (1981) The delta modulation techniques in static PWM inverters. IEEE Transactions on Industry Applications, 17,199-204.
308. Alvarez-Hernández, M.M., Shinbrot,T., Zalc, J., and Muzzio, F.J. (2002) Practical chaotic mixing. Journal of Chemical Engineering Science, 57,3749-3753.
309. Ascanio, G., Brito-Bazán, M., Brito-De La Fuente, E. et al. (2002) Unconventional configuration studies to improve mixing times in stirred tanks. Canadian Journal of Chemical Engineering, 80,558-565.
310. Chaté, H., Villermaux, E., and Chomaz, J.-M. (1999) Mixing, Kluwer, New York.
311. Chau, K.T. and Wang, Z. (2005) Application of chaotic motion to industrial compactors. Proceedings of International Conference on Electrical Machines and Systems, pp. 1644-1649.
312. Chau, K.T. and Wang, Z. (2006) Design of permanent magnets to chaoize doubly salient PM motors for electric compaction. Journal of Applied Physics, 99(80R306), 1-3.
313. Chau, K.T.,Ye, S., Gao,Y., and Chen, J.H. (2004) Application of chaotic-motion motors to industrial mixing processes. Proceedings of IEEE Industry Applications Society Annual Meeting, pp. 1874-1880.
314. Dong, L., Johansen, S.T., and Engh, T.A. (1994) Flow induced by an impeller in an unbaffled tank-I. Experimental. Chemical Engineering Science, 49,549-560.
315. Fanger, P.O. (1970) Thermal Comfort-Analysis and Applications in Environmental Engineering, McGraw-Hill, New York.
316. Fountain, G.O., Khakhar, D.V., Mezic, I., and Ottino, J.M. (2000) Chaotic mixing in a bounded three-dimensional flow. Journal of Fluid Mechanics, 417,265-301.
317. Gao, Y., Chau, K.T., and Ye, S. (2005) A novel chaotic-speed single-phase induction motor drive for cooling fans. Proceedings of IEEE Industry Applications Society Annual Meeting, pp. 1337-1341.
318. Gethin, D.T., Ransing, R.S., Lewis, R.W. et al. (2001) Numerical comparison of a deformable discrete element model and an equivalent continuum analysis for the compaction of ductile porous material. Computers and Structures, 79,1287-1294.
319. Harnby, N., Edwards, M.F., and Nienow, A.W. (1992) Mixing in the Process Industries, Butterworth-Heinemann, Oxford.
320. Ito, S. and Narikiyo, T. (1998) Abrasive machining under wet condition and constant pressure using chaotic rotation (in Japanese). Journal of the Japan Society for Precision Engineering, 64,748-752.
321. Jana, S.C. and Sau, M. (2004) Effects of viscosity ratio and composition on development of morphology in chaotic mixing of polymers. Polymer, 45,1665-1678.
322. Katayama, R., Kajitani, Y., Kuwata, K., and Nishida, Y. (1993) Developing tools and methods for applications incorporating neuro, fuzzy and chaos technology. Computers and Industrial Engineering, 24,579-592.
323. Kuwata, K., Kajitani, Y., Watanabe, M., and Katayama, R. (1996) Chaos simulator as a developing tool and a research environment for applications of chaos engineering. Journal of Network and Computer Applications, 19,45-66.
324. Lamberto, D.J., Muzzio, F.J., Swanson, P.D., and Tonkovich, A.L. (1996) Using time-dependent rpm to enhance mixing in stirred vessels. Chemical Engineering Science, 51,733-741.
325. Long,Y.J. (2001) Chaotic dynamics and compaction engineering. Proceedings of International Conference on Soft Soil Engineering, pp. 143-147.
326. Mavros, P. (2001) Flow visualization in stirred vessels, a review of experimental techniques. Transactions of the Institution of Chemical Engineers, Part A, 79,113-127.
327. Nomura, H., Wakami, N., and Kazuyuki, A. (1996) Time-series analysis of behavior of a two-link nozzle in a dishwasher. Electronics and Communications in Japan, 79,88-97.
328. Nomura, H., Wakami, N., and Kondo, S. (1995) Non-linear technologies in a dishwasher. Proceedings of IEEE International Conference on Fuzzy Systems, pp. 57-58.
329. Ottino, J.M. (1989) The Kinematics of Mixing: Stretching, Chaos, and Transport, Cambridge University Press, Cambridge.
330. Procaccia, I. and Schuster, H. (1983) Functional renormalization-group theory of universal 1/f noise in dynamical systems. Physical Review A, 28,1210-1212.
331. Raynal, F. and Gence, J.N. (1997) Energy saving in chaotic laminar mixing. Journal of Heat and Mass Transfer, 40,3267-3273.
332. Shaw, M.C. (1996) Principles of Abrasive Processing, Oxford University Press, Oxford.
333. Tran, D.T. and Muro, T. (2004) Effect of an innovative vertical vibro-tracked vehicle on soil compaction. Journal of Terramechanics, 41,1-23.
334. Wang, B.H., Koh, S.B., Ahn, S.K., and Roychowdhury, S. (1996) ChaosWashing Machine and a Method of Washing Thereof. United States Patent 5560230.
335. Wang, Z. and Chau, K.T. (2008) Anti-control of chaos of a permanent magnet DC motor system for vibratory compactors. Chaos, Solitons and Fractals, 36,694-708.
336. Wang, Z. and Chau, K.T. (2009) Design, analysis and experimentation of chaotic permanent magnet DC motor drives for electric compaction. IEEE Transactions on Circuits and Systems II: Express Briefs, 56,245-249.
337. Wyon, D.P. (1973) The role of the environment in buildings today: thermal aspects (factors affecting the choice of a suitable room temperature). Build International, 6,39-54.
338. Ye, S. and Chau, K.T. (2005a) Design of permanent magnets to chaoize PM synchronous motors for industrial mixer. Proceedings of IEEE International Magnetics Conference, pp. 723-724.
339. Ye, S. and Chau, K.T. (2005b) Destabilization control of a chaotic motor for industrial mixers. Proceedings of IEEE Industry Applications Society Annual Meeting, pp. 1724-1730.
340. Ye, S. and Chau, K.T. (2007) Chaoization of DC motors for industrial mixing. IEEE Transactions on Industrial Electronics, 54,2024-2032.
341. Ye, S., Chau, K.T., and Niu, S. (2006) Chaoization of a single-phase induction motor for washing machines. Proceedings of IEEE Industry Applications Society Annual Meeting, pp. 855-860.
342. Yoo, T.S. and Selig, E.T. (1979) Dynamics of vibratory-roller compaction. ASCE Journal of the Geotechnical Engineering Division, 105,1211-1231.