Strength of trabecular bone

Bone Mechanics Handbook, Second Edition

Volumn , Issue , 2001, Pages 16-1-16-42

  Keaveny, Tony M ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85057213375     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (164)

1. Harrigan, T. P., Jasty, M., Mann, R. W., and Harris, W. H., Limitations of the continuum assumption in cancellous bone, J. Biomech., 21, 269-275, 1988.
2. Goldstein, S. A., Goulet, R., and McCubbrey, D., Measurement and significance of three-dimensional architecture to the mechanical integrity of trabecular bone, Calcif. Tissue Int., 53S, S127-S133, 1993.
3. McCalden, R. W., McGeough, J. A., and Court-Brown, C. M., Age-related changes in the compressive strength of cancellous bone. The relative importance of changes in density and trabecular architecture, J. Bone Joint Surg. (Am.), 79, 421-427, 1997.
4. Snyder, B. and Hayes, W., Multiaxial structure-property relations in trabecular bone, in Biomechanics of Diarthrodial Joints, V. C. Mow, A. Ratcliffe, and S.-Y. Woo, Eds., Springer-Verlag, New York, 1990, 31-59.
5. Cowin, S. C., The relationship between the elasticity tensor and the fabric tensor, Mech. Mater., 4, 137-147, 1985.
6. van Rietbergen, B., Odgaard, A., Kabel, J., and Huiskes, R., Direct mechanics assessment of elastic symmetries and properties of trabecular bone architecture, J. Biomech., 29, 1653-1657, 1996.
7. Linde, F., Hvid, I., and Pongsoipetch, B., Energy absorptive properties of human trabecular bone specimens during axial compression, J. Orthop. Res., 7, 432-439, 1989.
8. Lotz, J. C., Gerhart, T. N., and Hayes, W. C., Mechanical properties of trabecular bone from the proximal femur: a quantitative CT study, J. Comput. Assist. Tomogr., 14, 107-114, 1990.
9. Rohlmann, A., Zilch, H., Bergmann, G., and Kolbel, R., Material properties of femoral cancellous bone in axial loading. Part I: Time independent properties, Arch. Orthop. Trauma Surg., 97, 95-102, 1980.
10. Keaveny, T. M., Wachtel, E. F., Ford, C. M., and Hayes, W. C., Differences between the tensile and compressive strengths of bovine tibial trabecular bone depend on modulus, J. Biomech., 27, 1137-1146, 1994.
11. Mosekilde, L., Mosekilde, L., and Danielsen, C. C., Biomechanical competence of vertebral trabecular bone in relation to ash density and age in normal individuals, Bone, 8, 79-85, 1987.
12. Mosekilde, L. and Mosekilde, L., Normal vertebral body size and compressive strength: relations to age and to vertebral and iliac trabecular bone compressive strength, Bone, 7, 207-212, 1986.
13. Mosekilde, L., Sex differences in age-related loss of vertebral trabecular bone mass and structure—biomechanical consequences, Bone, 10, 425-432, 1989.
14. Ding, M., Dalstra, M., Danielsen, C. C., Kabel, J., Hvid, I., and Linde, F., Age variations in the properties of human tibial trabecular bone, J. Bone Joint Surg. (Br.), 79, 995-1002, 1997.
15. Keaveny, T. M., Wachtel, E. F., Zadesky, S. P., and Arramon, Y. P., Application of the Tsai-Wu quadratic multiaxial failure criterion to bovine trabecular bone, J. Biomech. Eng., 121, 99-107, 1999.
16. Ford, C. M. and Keaveny, T. M., The dependence of shear failure properties of bovine tibial trabecular bone on apparent density and trabecular orientation, J. Biomech., 29, 1309-1317, 1996.
17. Carter, D. R. and Hayes, W. C., The compressive behavior of bone as a two-phase porous structure, J. Bone Joint Surg., 59-A, 954-962, 1977.
18. Rice, J. C., Cowin, S. C., and Bowman, J. A., On the dependence of the elasticity and strength of cancellous bone on apparent density, J. Biomech., 21, 155-168, 1988.
19. Hansson, T. H., Keller, T. S., and Panjabi, M. M., A study of the compressive properties of lumbar vertebral trabeculae: effects of tissue characteristics, Spine, 11, 56-62, 1986.
20. Kopperdahl, D. L. and Keaveny, T. M., Yield strain behavior of trabecular bone, J. Biomech., 31, 601-608, 1998.
21. Gibson, L. J., The mechanical behavior of cancellous bone, J. Biomech., 18, 317-328, 1985.
22. Rajan, K., Linear elastic properties of trabecular bone: a cellular solid approach, J. Mater. Sci. Lett., 4, 609-611, 1985.
23. Keaveny, T. M., Mechanistic approaches to analysis of trabecular bone, Forma, 12, 267-275, 1997.
24. Turner, C. H., On Wolff’s law of trabecular architecture, J. Biomech., 25, 1-9, 1992.
25. Cowin, S. C., Wolff’s law of trabecular architecture at remodeling equilibrium, J. Biomech. Eng., 108, 83-88, 1986.
26. Cowin, S. C., Sadegh, A. M., and Luo, G. M., An evolutionary Wolff’s law for trabecular architecture, J. Biomech. Eng., 114, 129-136, 1992.
27. Carter, D. R., Schwab, G. H., and Spengler, D. M., Tensile fracture of cancellous bone, Acta Orthop. Scand., 51, 733-741, 1980.
28. Kaplan, S. J., Hayes, W. C., Stone, J. L., and Beaupre, G. S., Tensile strength of bovine trabecular bone, J. Biomech., 18, 723-727, 1985.
29. Stone, J. L., Beaupre, G. S., and Hayes, W. C., Multiaxial strength characteristics of trabecular bone, J. Biomech., 16, 743-752, 1983.
30. Rohl, L., Larsen, E., Linde, F., Odgaard, A., and Jorgensen, J., Tensile and compressive properties of cancellous bone, J. Biomech., 24, 1143-1149, 1991.
31. Brown, T. D. and Ferguson, A. B., Mechanical property distributions in the cancellous bone of the human proximal femur, Acta Orthop. Scand., 51, 429-437, 1980.
32. Ducheyne, P., Heymans, L., Martens, M., Aernoudt, E., Meester, P., and Mulier, J., The mechanical behavior of intracondylar cancellous bone of the femur at different loading rates, J. Biomech., 10, 747-762, 1977.
33. Goldstein, S. A., Wilson, D. L., Sonstegard, D. A., and Matthews, L. S., The mechanical properties of human tibial trabecular bone as a function of metaphyseal location, J. Biomech., 16, 965-969, 1983.
34. Odgaard, A., Hvid, I., and Linde, F., Compressive axial strain distributions in cancellous bone specimens, J. Biomech., 22, 829-835, 1989.
35. Turner, C. H., Yield behavior of bovine cancellous bone, J. Biomech. Eng., 111, 256-260, 1989.
36. Williams, J. L. and Lewis, J. L., Properties and an anisotropic model of cancellous bone from the proximal tibial epiphysis, J. Biomed. Eng., 104, 50-56, 1982.
37. Fyhrie, D. P. and Schaffler, M. B., Failure mechanisms in human vertebral cancellous bone, Bone, 15, 105-109, 1994.
38. Hou, F. J., Lang, S. M., Hoshaw, S. J., Reimann, D. A., and Fyhrie, D. P., Human vertebral body apparent and hard tissue stiffness, J. Biomech., 31, 1009-1015, 1998.
39. Hansson, T. H., Keller, T. S., and Panjabi, M. M., A study of the compressive properties of lumbar vertebral trabeculae: effects of tissue characteristics, Spine, 12, 56-62, 1987.
40. Hvid, I., Bentzen, S. M., Linde, F., Mosekilde, L., and Pongsoipetch, B., X-ray quantitative computed tomography: the relations to physical properties of proximal tibial trabecular bone specimens, J. Biomech., 22, 837-844, 1989.
41. Hvid, I., Jensen, N. C., Bunger, C., Solund, K., and Djurhuus, J. C., Bone mineral assay: its relation to the mechanical strength of cancellous bone, Eng. Med., 14, 79-83, 1985.
42. Mosekilde, L., Bentzen, S. M., Ortoft, G., and Jorgensen, J., The predictive value of quantitative computed tomography for vertebral body compressive strength and ash density, Bone, 10, 465-470, 1989.
43. Linde, F. and Hvid, I., Stiffness behaviour of trabecular bone specimens, J. Biomech., 20, 83-89, 1987.
44. Linde, F. and Hvid, I., The effect of constraint on the mechanical behaviour of trabecular bone specimens, J. Biomech., 22, 485-490, 1989.
45. Linde, F., Hvid, I., and Madsen, F., The effect of specimen geometry on the mechanical behaviour of trabecular bone specimens, J. Biomech., 25, 359-368, 1992.
46. Odgaard, A. and Linde, F., The underestimation of Young’s modulus in compressive testing of cancellous bone specimens, J. Biomech., 24, 691-698, 1991.
47. Keaveny, T. M., Borchers, R. E., Gibson, L. J., and Hayes, W. C., Trabecular bone modulus and strength can depend on specimen geometry, J. Biomech., 26, 991-1000, 1993.
48. Keaveny, T. M., Pinilla, T. P., Crawford, R. P., Kopperdahl, D. L., and Lou, A., Systematic and random errors in compression testing of trabecular bone, J. Orthop. Res., 15, 101-110, 1997.
49. Morgan, E. F., Arramon, Y. P., Kopperdahl, D. L., and Keaveny, T. M., Dependence of yield strain on anatomic site for human trabecular bone, Adv. Bioeng., Nashville TN, ASME BED-Vol. 43, 23-24, 1999.
50. Silva, M. J., Keaveny, T. M., and Hayes, W. C., Computed tomography-based finite element analysis predicts failure loads and fracture patterns for vertebral sections, J. Orthop. Res., 16, 300-308, 1998.
51. Chang, W. C. W., Christensen, T. M., Pinilla, T. P., and Keaveny, T. M., Isotropy of uniaxial yield strains for bovine trabecular bone, J. Orthop. Res., 17, 582-585, 1999.
52. Gibson, L. J. and Ashby, M. F., Cellular Solids: Structures & Properties, 2nd ed., Pergamon Press, Oxford, 1997.
53. Reilly, D. T. and Burstein, A. H., The elastic and ultimate properties of compact bone tissue, J. Biomech., 8, 393-405, 1975.
54. McElhaney, J., Alem, N., and Roberts, V., A porous block model for cancellous bone, Trans. ASME, 1, 9, 1970.
55. Beaupre, G. S. and Hayes, W. C., Finite element analysis of a three-dimensional open-celled model for trabecular bone, J. Biomech. Eng., 107, 249-256, 1985.
56. Guo, X. E., McMahon, T. A., Keaveny, T. M., Hayes, W. C., and Gibson, L. J., Finite element modeling of damage accumulation in trabecular bone under cyclic loading, J. Biomech., 27, 145-155, 1994.
57. Pugh, J. W., Rose, R. M., and Radin, E. L., A structural model for the mechanical behavior of trabecular bone, J. Biomech., 6, 657-670, 1973.
58. Jensen, K. S., Mosekilde, L., and Mosekilde, L., A model of vertebral trabecular bone architecture and its mechanical properties, Bone, 11, 417-423, 1990.
59. Silva, M. J. and Gibson, L. J., The effects of non-periodic microstructure on the elastic properties of two-dimensional cellular solids, Int. J. Mech. Sci., 37, 1161-1177, 1995.
60. Silva, M. J. and Gibson, L. J., Modeling the mechanical behavior of vertebral trabecular bone: effects of age-related changes in microstructure, Bone, 21, 191-199, 1997.
61. Silva, M. J. and Gibson, L. J., The effects of non-periodic microstructure and defects on the compressive strength of two-dimensional cellular solids, Int. J. Mech. Sci., 39, 549-563, 1997.
62. Yeh, O. C. and Keaveny, T. M., Biomechanical effects of intra-specimen variations in trabecular architecture: a three-dimensional finite element study, Bone, 25, 223-228, 1999.
63. Mosekilde, L., Age-related changes in vertebral trabecular bone architecture—assessed by a new method, Bone, 9, 247-250, 1988.
64. Wakamatsu, E. and Sissons, H. A., The cancellous bone of the iliac crest, Calcif. Tissue Res., 4, 147-161, 1969.
65. Aaron, J. E., Makins, N. B., and Sagreiya, K., The microanatomy of trabecular bone loss in normal aging men and women, Clin. Orthop., 215, 260-271, 1987.
66. Kothari, M., Keaveny, T. M., Lin, J. C., Newitt, D. C., Genant, H., and Majumdar, S., Measurement of intra-specimen variations in cancellous bone architecture, Bone, 25, 245-250, 1999.
67. Yeh, O. C. and Keaveny, T. M., Roles of microdamage and microfracture in the mechanical behavior of trabecular bone, Trans. Orthop. Res. Soc. (Orlando), 25, 34, 2000.
68. Feldkamp, L. A., Goldstein, S. A., Parfitt, A. M., Jesion, G., and Kleerekoper, M., The direct examination of three-dimensional bone architecture in vitro by computed tomography, J. Bone Miner. Res., 4, 3-11, 1989.
69. Müller, R., Hahn, M., Vogel, M., Delling, G., and Rüegsegger, P., Morphometric analysis of non-invasively assessed bone biopsies, comparison of high-resolution computed tomography and histologic sections, Bone, 18, 215-220, 1996.
70. Odgaard, A., Andersen, K., Melsen, F., and Gundersen, H. J., A direct method for fast threedimensional serial reconstruction, J. Microsc., 159, 335-342, 1990.
71. Beck, J. D., Canfield, B. L., Haddock, S. M., Chen, T. J. H., Kothari, M., and Keaveny, T. M., Threedimensional imaging of trabecular bone using the Computer Numerically Controlled Milling technique, Bone, 21, 281-287, 1997.
72. Kinney, J. H., Lane, N. E., and Haupt, D. L., In vivo, three-dimensional microscopy of trabecular bone, J. Bone Miner. Res., 10, 264-270, 1995.
73. Chung, H. W., Wehrli, F. W., Williams, J. L., and Wehrli, S. L., Three-dimensional nuclear magnetic resonance microimaging of trabecular bone, J. Bone Miner. Res., 10, 1452-1461, 1995.
74. Hipp, J. A., Jansujwicz, A., Simmons, C. A., and Snyder, B. D., Trabecular bone morphology from micro-magnetic resonance imaging, J. Bone Miner. Res., 11, 286-297, 1996.
75. van Rietbergen, B., Weinans, H., Huiskes, R., and Odgaard, A., A new method to determine trabecular bone elastic properties and loading using micromechanical finite element models, J. Biomech., 28, 69-81, 1995.
76. Hollister, S. J., Brennan, J. M., and Kikuchi, N., A homogenization sampling procedure for calculating trabecular bone effective stiffness and tissue level stress, J. Biomech., 27, 433-444, 1994.
77. van Rietbergen, B., Müller, R., Ulrich, D., Rüegsegger, P., and Huiskes, R., Tissue stresses and strain in trabeculae of a canine proximal femur can be quantified from computer reconstructions, J. Biomech., 32, 165-173, 1999.
78. Ulrich, D., van Rietbergen, B., Laib, A., and Rüegsegger, P., Load transfer analysis of the distal radius from in-vivo high-resolution CT-imaging, J. Biomech., 32, 821-828, 1999.
79. van Rietbergen, B., Weinans, H., Huiskes, R., and Polman, B. J. W., Computational strategies for iterative solutions of large FEM applications employing voxel data, Int. J. Numer. Methods. Eng., 39, 2743-2767, 1996.
80. Hollister, S. J., Fyhrie, D. P., Jepsen, K. J., and Goldstein, S. A., Application of homogenization theory to the study of trabecular bone mechanics, J. Biomech., 24, 825-839, 1991.
81. Hollister, S. J., Kikuchi, N., and Goldstein, S. A., Do bone ingrowth processes produce a globally optimized structure? J. Biomech., 26, 391-407, 1993.
82. Muller, R. and Ruegsegger, P., Analysis of mechanical properties of cancellous bone under conditions of simulated bone atrophy, J. Biomech., 29, 1053-1060, 1996.
83. van Rietbergen, B., Weinans, H., and Huiskes, R., Prospects of computer models for the prediction of osteoporotic bone fracture risk, Stud. Health Technol. Inform., 40, 25-32, 1997.
84. van Rietbergen, B., Odgaard, A., Kabel, J., and Huiskes, R., Relationships between bone morphology and bone elastic properties can be accurately quantified using high-resolution computer reconstructions, J. Orthop. Res., 16, 23-28, 1998.
85. Kinney, J. H. and Ladd, A. J., The relationship between three-dimensional connectivity and the elastic properties of trabecular bone, J. Bone Miner. Res., 13, 839-845, 1998.
86. Ladd, A. J., Kinney, J. H., Haupt, D. L., and Goldstein, S. A., Finite-element modeling of trabecular bone: comparison with mechanical testing and determination of tissue modulus, J. Orthop. Res., 16, 622-628, 1998.
87. Fyhrie, D. P., and Hou, F. J., Prediction of human vertebral cancellous bone strength using nonlinear, anatomically accurate, large-scale, finite element analysis, Proc. Bioeng. Conf., Beaver Creek, CO. ASME, ASME BED-Vol. 29, 301-302, 1995.
88. van Rietbergen, B., Ulrich, D., Pistoia, W., Huiskes, R., and Ruegsegger, P., Prediction of trabecular bone failure parameters using a tissue failure criterion, Trans. Orthop. Res. Soc., New Orleans, 23, 550, 1998.
89. Niebur, G. L., Hsia, A. C., Chen, T. J., and Keaveny, T. M., Simulation of trabecular bone yield using nonlinear finite element analysis, Adv. Bioeng., Nashville TN, ASME BED-Vol. 43, 175-176, 1999.
90. Turner, C. H., Rho, J., Takano, Y., Tsui, T. Y., and Pharr, G. M., The elastic properties of trabecular and cortical bone tissues are similar: results from two microscopic measurement techniques, J. Biomech., 32, 437-441, 1999.
91. Rho, J. Y., Tsui, T. Y., and Pharr, G. M., Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation, Biomaterials, 18, 1325-1330, 1997.
92. Brown, T. D., Mutschler, T. A., and Ferguson, A. B., A non-linear finite element analysis of some early collapse processes in femoral head osteonecrosis, J. Biomech., 15, 705-715, 1982.
93. Carter, D. R., Orr, T. E., and Fyhrie, D. P., Relationships between loading history and femoral cancellous bone architecture, J. Biomech., 22, 231-244, 1989.
94. Carter, D. R. and Vasu, R., Stress changes in the femoral head due to porous ingrowth surface replacement arthroplasty, J. Biomech., 17, 737-747, 1984.
95. Cheal, E. J., Hayes, W. C., Lee, C. H., Snyder, B. D., and Miller, J., Stress analysis of a condylar knee tibial component: influence of metaphyseal shell properties and cement injection depth, J. Orthop. Res., 3, 424-434, 1985.
96. Cheal, E. J., Snyder, B. D., Nunamaker, D. M., and Hayes, W. C., Trabecular bone remodeling around smooth and porous implants in an equine patellar model, J. Biomech., 20, 1121-1134, 1987.
97. Fyhrie, D. P. and Carter, D. R., Femoral head apparent density distribution predicted from bone stresses, J. Biomech., 23, 1-10, 1990.
98. Hayes, W. C., Swenson, L. W., Jr., and Schurman, D. J., Axisymmetric finite element analysis of the lateral tibial plateau, J. Biomech., 11, 21-33, 1978.
99. Vasu, R., Carter, D. R., and Harris, W. H., Stress distributions in the acetabular region. I. Before and after total joint replacement, J. Biomech., 15, 155-164, 1981.
100. Lotz, J. C., Cheal, E. J., and Hayes, W. C., Fracture prediction for the proximal femur using finite element models: Part II—Nonlinear analysis, J. Biomech. Eng., 113, 361-365, 1991.
101. Lotz, J. C., Cheal, E. J., and Hayes, W. C., Fracture prediction for the proximal femur using finite element models: Part I—Linear analysis, J. Biomech. Eng., 113, 353-360, 1991.
102. Cowin, S. C., Fabric dependence of an anisotropic strength criterion, Mech. Mater., 5, 251-260, 1986.
103. Cowin, S. C., Bone Mechanics, CRC Press, Boca Raton, FL, 1989.
104. Fenech, C. and Keaveny, T. M., A cellular solid criterion for predicting the axial-shear failure properties of trabecular bone, J. Biomech. Eng., 121, 414-422, 1999.
105. Tsai, S. and Wu, E., A general theory for strength of anisotropic materials, J. Comp. Mater., 5, 58-80, 1971.
106. Wu, E., Phenomenological anisotropic failure criterion, in Mechanics of Composite Materials, G. Sendecky, Ed., Academic Press, New York, 1974, 353-431.
107. Triantafillou, T. C., Zhang, J., Shercliff, T. L., Gibson, L. J., and Ashby, M. F., Failure surfaces for cellular materials under multiaxial loads—II. Comparison of models with experiment, Int. J. Mech. Sci., 31, 665-678, 1989.
108. Gibson, L. J., Ashby, M. F., Zhang, J., and Triantafillou, T. C., Failure surfaces for cellular materials under multiaxial loads—I. Modelling, Int. J. Mech. Sci., 31, 635-663, 1989.
109. Triantafillou, T. C. and Gibson, L. J., Multiaxial failure criteria for brittle foams, Int. J. Mech. Sci., 32, 479-496, 1990.
110. Patel, M. R., The Deformation and Fracture of Rigid Cellular Plastics under Multiaxial Stress, Ph.D. dissertation, University of California, Berkeley, CA, 1969.
111. Cezayirlioglu, H., Bahniuk, E., Davy, D. T., and Heiple, K. G., Anisotropic yield behavior of bone under combined axial force and torque, J. Biomech., 18, 61-69, 1985.
112. Hayes, W. C. and Wright, T. M., An empirical strength theory for compact bone, Fracture, 3, 1173-1179, 1977.
113. Cowin, S. C., On the strength anisotropy of bone and wood, J. Mech., 46, 832-838, 1979.
114. Zaslawsky, M., Multiaxial-stress studies on rigid polyurethane foam, Exp., Mech., 2, 70-76, 1973.
115. Cowin, S. C. and Turner, C. H., On the relationship between the orthotropic Young’s moduli and fabric, J. App. Biomech., 25, 1493-1494, 1992.
116. Turner, C. H., Cowin, S. C., Rho, J. Y., Ashman, R. B., and Rice, J. C., The fabric dependence of the orthotropic elastic constants of cancellous bone, J. Biomech., 23, 549-561, 1990.
117. Harrigan, T. and Mann, R., Characterization of microstructural anisotropy in orthotropic materials using a second rank tensor, J. Mater. Sci., 19, 761-767, 1984.
118. Whitehouse, W. J., The quantitative morphology of anisotropic trabecular bone, J. Microsc., 2, 153-168, 1974.
119. Whitehouse, W. J., A stereological method for calculating internal surface areas in structures which have become anisotropic as the result of linear expansions or contractions, J. Microsc., 101, (2), 169-176, 1974.
120. Rowlands, R. E., Strength (failure) theories and their experimental correlations, in Handbook of Composites, Vol. 3, G. C. Sih and A. M. Skudra, Eds., Elsevier Science, Amsterdam, 1985, 71-125.
121. Galante, J., Rostoker, W., and Ray, R. D., Physical properties of trabecular bone, Calcif. Tissue Res., 5, 236-246, 1970.
122. Burr, D. B., Forwood, M. R., Fyhrie, D. P., Martin, R. B., Schaffler, M. B., and Turner, C. H., Bone microdamage and skeletal fragility in osteoporotic and stress fractures, J. Bone Miner. Res., 12, 6-15, 1997.
123. Hansson, T. and Roos, B., Microcalluses of the trabeculae in lumbar vertebrae and their relation to the bone mineral content, Spine, 6, 375-380, 1981.
124. Hahn, M., Vogel, M., Amling, M., Ritzel, H., and Delling, G., Microcallus formations of the cancellous bone: a quantitative analysis of the human spine, J. Bone Miner. Res., 10, 1410-1416, 1995.
125. Mori, S., Harruff, R., Ambrosius, W., and Burr, D. B., Trabecular bone volume and microdamage accumulation in the femoral heads of women with and without femoral neck fractures, Bone, 21, 521-526, 1997.
126. Fazzalari, N. L., Forwood, M. R., Smith, K., Manthey, B. A., and Herreen, P., Assessment of cancellous bone quality in severe osteoarthrosis: bone mineral density, mechanics, and microdamage, Bone, 22, 381-388, 1998.
127. Vernon, R. B. and Pirie, C. J., Healing trabecular microfractures in the bodies of lumbar vertebrae, Ann. Rheum. Dis., 32, 406-412, 1973.
128. Wenzel, T. E., Schaffler, M. B., and Fyhrie, D. P., In vivo trabecular microcracks in human vertebral bone, Bone, 19, 89-95, 1996.
129. Ohtani, T. and Azuma, H., Trabecular microfractures in the acetabulum. Histologic studies in cadavers, Acta Orthop. Scand., 55, 419-422, 1984.
130. Urovitz, E. P., Fornasier, V. L., Risen, M. I., and MacNab, I., Etiological factors in the pathogenesis of femoral trabecular fatigue fractures, Clin. Orthop., 1977, 275-280, 1977.
131. Koszyca, B., Fazzalari, N. L., and Vernon, R. B., Trabecular microfractures. Nature and distribution in the proximal femur, Clin. Orthop., 244, 208-216, 1989.
132. Benaissa, R., Uhthoff, H. K., and Mercier, P., Repair of trabecular fatigue fractures. Cadaver studies of the upper femur, Acta Orthop. Scand., 60, 585-589, 1989.
133. Todd, R. C., Freeman, M. A., and Pirie, C. J., Isolated trabecular fatigue fractures in the femoral head, J. Bone Joint Surg. (Br.), 54, 723-728, 1972.
134. Pugh, J. W., Rose, R. M., and Radin, E. L., A possible mechanism of Wolff’s law: trabecular microfractures, Arch. Int. Physiol. Biochim., 81, 27-40, 1973.
135. Radin, E. L., Parker, H. G., Pugh, J. W., Steinberg, R. S., Paul, I. L., and Rose, R. M., Response of joints to impact loading. 3. Relationship between trabecular microfractures and cartilage degeneration, J. Biomech, 6, 51-57, 1973.
136. Fazzalari, N. L., Trabecular microfracture, Calcif. Tissue Int., 53, S143-S147, 1993.
137. Mosekilde, L., Consequences of the remodelling process for vertebral trabecular bone structure: a scanning electron microscopy study (uncoupling of unloaded structures), Bone Miner., 10, 13-35, 1990.
138. Hasegawa, K., Turner, C. H., Chen, J., and Burr, D. B., Effect of disc lesion on microdamage accumulation in lumbar vertebrae under cyclic compression loading, Clin. Orthop., 311, 190-198, 1995.
139. Wachtel, E. F. and Keaveny, T. M., Dependence of trabecular damage on mechanical strain, J. Orthop. Res., 15, 781-787, 1997.
140. Keaveny, T. M., Wachtel, E. F., and Kopperdahl, D. L., Mechanical behavior of human trabecular bone after overloading, J. Orthop. Res., 17, 346-353, 1999.
141. Keaveny, T. M., Wachtel, E. F., Guo, X. E., and Hayes, W. C., Mechanical behavior of damaged trabecular bone, J. Biomech., 27, 1309-1318, 1994.
142. Zysset, P. K. and Curnier, A., A 3D damage model for trabecular bone based on fabric tensors, J. Biomech., 29, 1549-1558, 1996.
143. Krajcinovic, D. and Lemaitre, J., Continuum Damage Mechanics, Theory and Applications, SpringerVerlag, New York, 1987.
144. Kopperdahl, D. L., Pearlman, J. L., and Keaveny, T. M., Biomechanical consequences of an isolated overload on the human vertebral body, J. Orthop. Res., 18, 685-690, 2000.
145. Silva, M. J., Keaveny, T. M., and Hayes, W. C., Direct and computed tomography thickness measurements of the human lumbar vertebral shell and endplate, Bone, 15, 409-414, 1994.
146. Fondrk, M., Bahniuk, E., Davy, D. T., and Michaels, C., Some viscoplastic characteristics of bovine and human cortical bone, J. Biomech., 21, 623-630, 1988.
147. Burr, D. B. and Stafford, T., Validity of the bulk-staining technique to separate artifactual from in vivo bone microdamage, Clin. Orthop., 260, 305-308, 1990.
148. Burr, D. B. and Hooser, M., Alterations to the en bloc basic fuchsin staining protocol for the demonstration of microdamage produced in vivo, Bone, 17, 431-433, 1995.
149. Fazzalari, N. L., Forwood, M. R., Manthey, B. A., Smith, K., and Kolesik, P., Three-dimensional confocal images of microdamage in cancellous bone, Bone, 23, 373-378, 1998.
150. Keyak, J. H., Lee, I. Y., Nath, D. S., and Skinner, H. B., Postfailure compressive behavior of tibial trabecular bone in three anatomic directions, J. Biomed. Mater. Res., 31, 373-378, 1996.
151. McCalden, R. W., McGeough, J. A., Barker, M. B., and Court-Brown, C. M., Age-related changes in the tensile properties of cortical bone. The relative importance of changes in porosity, mineralization, and microstructure, J. Bone Joint Surg. (Am.), 75, 1193-1205, 1993.
152. Burstein, A. H., Reilly, D. T., and Martens, M., Aging of bone tissue: mechanical properties, J. Bone Joint Surg. (Am.), 58, 82-86, 1976.
153. Courtney, A. C., Hayes, W. C., and Gibson, L. J., Age-related differences in post-yield damage in human cortical bone. Experiment and model, J. Biomech., 29, 1463-1471, 1996.
154. Pugh, J. W., Rose, R. M., and Radin, E. L., Elastic and viscoelastic properties of trabecular bone: dependence on structure, J. Biomech., 6, 475-485, 1973.
155. Carter, D. R. and Hayes, W. C., Bone compressive strength: the influence of density and strain rate, Science, 194, 1174-1176, 1976.
156. Linde, F., Norgaard, P., Hvid, I., Odgaard, A., and Soballe, K., Mechanical properties of trabecular bone. Dependency on strain rate, J. Biomech., 24, 803-809, 1991.
157. Courtney, A. C., Wachtel, E. F., Myers, E. R., and Hayes, W. C., Effects of loading rate on the strength of the proximal femur, Calcif. Tissue Int., 55, 53-58, 1994.
158. Ochoa, J. A., Sanders, A. P., Kiesler, T. W., Heck, D. A., Toombs, J. P., Brandt, K. D., and Hillberry, B. M., In vivo observations of hydraulic stiffening in the canine femoral head, J. Biomech. Eng., 119, 103-108, 1997.
159. Schoenfeld, C. M., Lautenschlager, E. P., and Meyer, P. R. J., Mechanical properties of human cancellous bone in the femoral head, Med. Biol. Eng., 12, 313-317, 1974.
160. Zilch, H., Rohlmann, A., Bergmann, G., and Kolbel, R., Material properties of femoral cancellous bone in axial loading. Part II: Time dependent properties, Arch. Orthop. Trauma Surg., 97, 257-262, 1980.
161. Michel, M. C., Guo, X. D., Gibson, L. J., McMahon, T. A., and Hayes, W. C., Compressive fatigue behavior of bovine trabecular bone, J. Biomech., 26, 453-463, 1993.
162. Bowman, S. M., Keaveny, T. M., Gibson, L. J., Hayes, W. C., and McMahon, T. A., Compressive creep behavior of bovine trabecular bone, J. Biomech., 27, 301-310, 1994.
163. Bowman, S. M., Guo, X. E., Cheng, D. W., Keaveny, T. M., Gibson, L. J., Hayes, W. C., and McMahon, T. A., Creep contributes to the fatigue behavior of bovine trabecular bone, J. Biomech. Eng., 120, 647-654, 1998.
164. Martin, R. B., Gibson, V. A., Stover, S. M., Gibeling, J. C., and Griffin, L. V., Residual strength of equine bone is not reduced by intense fatigue loading: implications for stress fracture, J. Biomech., 30, 109-114, 1997.