Mechanical and tribological requirements and evaluation of coating composites

Modern Tribology Handbook: Volume One: Principles of Tribology

Volumn , Issue , 2000, Pages 931-963

  Hogmark, Sture ^a   Jacobson, Staffan ^a   Larsson, Mats ^b   Wiklund, Urban ^a  

^a UPPSALA UNIVERSITY   (Sweden)

^b Balzers Sandvik Coating AB   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85056933878     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (81)

1. Allen, S.M. and Thomas, E.L. (1998), The Structure of Materials, Wiley, New York.
2. Andersson, S., (1999), Prediction of wear in rolling and sliding contacts, Proc. 21 IRG-OECD Meeting on Wear of Engineering Materials, Amsterdam, March 25-26.
3. Axén, N., Jacobson, S., and Hogmark, S. (1994), Influence of the hardness of the counterbody in threebody abrasive wear — an overlooked hardness effect, Tribol. Int., 27, 233–241.
4. Bell, T. (1975), Heat Treat. Met., 2, 39-49.
5. Bell, T. (1997), New Directions in Tribology, Mech. Eng. Publication Ltd., World Trib. Congress, London, 121.
6. Bergmann, E., Kaufmann, H., Schmid, R., and Vogel, J. (1990), Ion-plated titanium carbonitride films, Surf. Coat. Technol., 42, 237-251.
7. Blakely, J.N. (1964), Mechanical properties of vacuum-deposited gold films, J. Appl. Phys., 35, 1736.
8. 3 and SiC in dry sliding, Wear, 171, 77-89.
9. Brown, G.C. and Pryputniewicz, R.J. (1993), Measurement of Young’s modulus on thin films under static and dynamic loading conditions, 302/SPIE, 2004 Interferometry, VI: Applications, 302.
10. Chu, X., Barnett, S.A., Wong, M.S., and Sproul, W.D. (1993), Reactive unbalanced magnetron sputter deposition of polycrystalline TiN/NbN superlattice coatings, Surf. Coat. Technol., 57, 13-18.
11. Courtney, T.H. (1990), in Mechanical Behavior of Materials, McGraw-Hill, New York.
12. Dingremont, N., Bergmann, B., and Collignon, P. (1995a), Application of duplex coatings for metal injection moulding, Surf. Coat. Technol., 72, 157-162.
13. Dingremont, N., Bergmann, B., Collignon, P., and Michel, H. (1995b), Optimisation of duplex coatings built from nitriding and ion plating with continuous and discontinuous operation for construction and hot working steels, Surf. Coat. Technol., 72, 163-168.
14. Farges, G., Bosch, J.P., and Bergmann, E. (1989), Friction and adhesive wear behavior of W-C coatings against steel and titanium nitride, Wear, 135, 1-14.
15. Gåhlin, R. and Jacobson, S. (1998), A novel method to map and quantify wear on a micro-scale, Wear, 222, 93–102.
16. Gåhlin, R., Alahelisten, A., and Jacobson, S. (1996), The effects of compressive stresses on the abrasion of diamond coatings, Wear, 196, 226–233.
17. Gåhlin, R., Larsson, M., Hedenqvist, P., Jacobson, S., and Hogmark, S. (1997), The crater grinder method as a means for coating wear evaluation — an update, Surf. Coat. Technol., 90, 107–114.
18. Gunnars, J. (1997), On Fracture of Layered Materials, Ph.D. thesis No. 37, Luleå University of Technology, Sweden.
19. Hedenqvist, P., Olsson, M., and Hogmark, S. (1992), Tribological studies of various magnetic heads and thin-film rigid disks, Wear, 153, 65-78.
20. Hellgren, N. (1999), Sputtered Carbon Nitride Thin Films, Ph.D. thesis No. 604, Linköping University, Sweden.
21. Helmersson, U., Sundgren, J.-E., and Greene, J.E. (1986), Microstructure evolution in TiN films reactively sputter deposited in multiphase substrates, J. Vac. Sci. Technology, A4, 500.
22. Hirvonen, J.-P., Koskinen, J., Jervis, J.R., and Nastasi, M. (1996), Present progress in the development of low friction coatings, Surf. Coat. Technol., 80, 139.
23. Hoffman, R.W. (1989), Nanomechanics of thin films: Emphasis: Tensile properties, Mat. Res. Soc. Proc., 130, 295.
24. Hogmark, S. and Jacobson, S. (1992a), Hints and guidelines for tribotesting and evaluation, JSTLE, May, 401-409.
25. Hogmark, S., Jacobson, S., and Vingsbo, O. (1992b), In Friction Lubrication and Wear Technology, ASM Handbook 18, 176.
26. Hogmark, S., Hollman, P., Alahelisten, A., and Hedenqvist, P. (1996), Direct current bias applied to hot flame diamond deposition produces smooth low friction coatings, Wear, 200, 225-232.
27. Hogmark, S., Hedenqvist, P., and Jacobson, S. (1997a), Tribological properties of thin hard coatings — Demands and evaluation, Surf. Coat. Technol., 90, 247-257.
28. Hogmark, S., Jacobson, S., Hedenqvist, P., and Olsson, M. (1997b), Surface Characterisation, A User’s Sourcebook, Brune, Hellborg, Whitlow and Hunderi (Eds.), Wiley-VCH, Weinheim, Germany, 624–644.
29. Hogmark, S., Jacobson, S., and Wänstrand, O. (1998), Universal test for friction, wear and lubrication, Swedish patent DNR 9802017-5.
30. Hollman, P. (1997a), Micro- and Nanocrystalline Diamond Coatings with Extreme Wear Resistance and Ultra Low Friction, Acta Universitatis Upsaliensis Dissertation in Science and Technology 325, ISBN 91-554-4084-3.
31. Hollman, P., Larsson, M., Hedenqvist, P, Hogmark, S. (1997b), Tensile testing as a method for determining the Young’s modulus of thin hard coatings, Surf. Coat. Technol., 90, 234-238.
32. Holmberg, K. and Matthews, A. (1994), Coatings Tribology, Tribology series, 28, Elsevier.
33. Johansson, E. (1993), Surface modification in tribology, Acta Universitatis Upsaliensis Dissertation in Science and Technology 433 ISBN 91-554-3061-6, Paper VII.
34. Jönsson, B. and Hogmark, S. (1984), Hardness measurements of thin films, Thin Solid Films, 114, 257-269.
35. Karner, J., Pedrazzini, M., Reineck, I., Sjöstrand, M.E., and Bergmann, E. (1996), CVD diamond coated cemented carbide cutting tools, Mater. Sci. Eng. A: (Structural Materials: Properties, Microstructure and Processing), A209, 402-410.
36. Kassman, Å., Jacobson, S., Erickson, L., Hedenqvist, P., and Olsson, M. (1991), A new test method for the intrinsic abrasion resistance of thin coatings, Surf. Coat. Technol., 50, 75–84.
37. Khruschov, M.M. (1974), Principles of abrasive wear, Wear, 28, 68-88.
38. Larsson, M. (1996a), Ph.D. thesis, Acta Universitatis Upsaliensis Dissertation No. 191, Uppsala University, Sweden.
39. Larsson, M., Hollman, P., Hedenqvist, P., Hogmark, S., Wahlström, U., and Hultman, L. (1996b), Deposition and microstructure of PVD TiN-NbN multilayered coatings, Surf. Coat. Technol., 86/87, 351-356.
40. Mao, K., Sun, Y., and Bell, T. (1994), Contact mechanics of engineering surfaces: state of the art, Surf. Eng., 10, 297-306.
41. Nix, W.D. (1989), Mechanical properties of thin films, Metallurgical Trans., 20a, 2225.
42. Nordgren, A. and Melander, A. (1988), Tool wear and inclusion behavior during turning of a Ca-treated quenched and tempered steel using coated cemented carbide tools, Proc. 1st Int. Conf. on the Behaviour of Materials in Machining, Stratford-upon-Avon, U.K., Nov., paper 20.
43. Nordin, M., Larsson, M., and Hogmark, S. (1998), Mechanical and tribological properties of multilayered PVD TiN/CrN, TiN/NbN, TiN/MoN and TiN/TaN, Surf. Coat. Technol., 106, 234-241.
44. Nordin, M., Larsson, M., and Hogmark, S. (1999), Wear resistance of multilayered PVD TiN/TaN coatings on HSS, Surf. Coat. Technol., 120-121, 528-534.
45. Oettel, H. and Wiedemann, R. (1995), Residual stresses in PVD hard coatings, Surf. Coat. Technol., 76/77, 265–273.
46. Oliver, W.C. and Pharr, G.M. (1992), An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments J. Mater. Res., 7, 1564-1583.
47. Palmai, Z. (1984), Formation of non-metallic protective layers on high speed tools, Met. Technol., 11, 34-37.
48. Ramsey, P.M., Chandler, H.W., and Page, T.F. (1991), Bending tests to estimate the through-thickness strength and interfacial shear strength in coated systems, Thin Solid Films, 201, 81-89.
49. Rickerby, D.S., Bellamy, B.A., and Jones, A.M. (1987), Internal stress and microstructure of titanium nitride coatings, Surf. Eng., 3, 138.
50. Rickerby, D.S. and Bull, S.J. (1989), Engineering with surface coatings. The role of coating microstructure, Surf. Coat. Technol., 39/40, 315.
51. Rickerby, D.S. and Burnett, P.J. (1987), The wear and erosion resistance of hard PVD coatings, Surf. Coat. Technol., 33, 191-211.
52. Röll, K. (1976), Analysis of stress and strain distribution in thin films and substrates, J. Appl. Phys., 47, 3224.
53. Rouzaud, A., Barbier, E., Ernoult, J., and Quesnel, E. (1995), A method for elastic modulus measurements of magnetron sputtered thin films dedicated to mechanical applications, Thin Solid Films, 270, 270.
54. Rutherford, K.L. and Hutchings, I.M. (1996), A microabrasive wear test with particular application to coated systems, Surf. Coat. Technol., 79, 231-239.
55. Rutherford, K.L. and Hutchings, I.M. (1997), Theory and application of a micro-scale abrasive wear test, J. Testing Eval., 25, 250-260.
56. Schultrich, B., Scheibe, H.-J., Grandremy, G., and Schneider, D. (1984), Elastic modulus of amorphous carbon films, Phys. Stat. Sol. (a), 145, 385.
57. Selinder, T.I., Nordin, M., Larsson, M., Hedenqvist, P., Östlund, Å., Hogmark, S., and Sjöstrand, M.E. (1998), Performance of PVD TiN/TaN and TiN/NbN superlattice coated cemented carbide tools in stainless steel machining Surf. Coat. Technol., 105, 51-55.
58. Shinn, M., Hultman, L., and Barnett, S.A. (1992), Growth, structure and microhardness of epitaxial TiN/NbN superlattices, J. Mater. Res., 7, 901-911.
59. Sjöström, H., Hultman, L., Sundgren, J.-E., Hainsworth, S.V., and Page, T.F. (1996), Structural and mechanical properties of L. carbon nitride CNx (0.2 ≤ x ≤ 0.35) films, Theunissen-GSAM, J. Vac. Sci. Technol., 14, 56-62.
60. Sproul, W.D. (1994), Multilayer, multicomponent, and multiphase physical vapor deposition coatings for enhanced performance, J. Vac. Sci. Technol., A12, 1595.
61. Sproul, W.D., Graham, M.E., Wong, M.S., Lopez, S., Li, D., and Scholl, R.A. (1995), Reactive direct current magnetron sputtering of aluminium oxide coatings, J. Vac. Sci. Technol., 13 1188.
62. Sproul, W.D. (1996a), Physical vapor deposition tool coatings, Surf. Coat. Technol., 81, 1.
63. Sproul, W.D. (1996b), Reactive sputter deposition of superhard polycrystalline nanolayered coatings, layered materials for structural applications, Symp. Mater. Res. Soc., Pittsburgh, PA, ix+314, 47-55.
64. Steinmann, P.A. and Hintermann, H.E. (1989), A review of the mechanical tests for assessment of thinfilm adhesion, J. Vac. Sci. Technol., A7, 2267-2272.
65. Steinmann, P.A., Tardy, Y., and Hintermann, H.E. (1987), Adhesion testing by the scratch test method: the influence of intrinsic and extrinsic parameters on the critical load, Thin Solid Films, 154, 333-349.
66. Stoney, G.G. (1909), The tension of metallic films deposited by electrolysis, Proc. R. Soc. London, A82, 172.
67. Sue, J.A. (1992), X-ray elastic constants and residual stress of textured titanium nitride coating, Surf. Coat. Technol., 54/55, 154.
68. Sugimura, Y., Lim, P.G., Shih, C.F., and Suresh, S. (1995), Fracture normal to a bimaterial interface: effects of plasticity on crack-tip shielding and amplification, Acta Metall. Mater., 43, 1157.
69. Suryanarayana, C. (1995), Nanocrystalline materials, Int. Mat. Rev., 40, 41.
70. Todorova, S., Helmersson, U., Barnett, S.A., Sundgren, J.-E., and Greene, J.E. (1987), TiN-VN strained layer superlattice hard coatings, IPAT 87. 6th Int. Conf. on Ion and Plasma Assisted Techniques, CEP Consultants, Edinburgh, U.K., xi+481,248.
71. Townsend, P.H. and Barnett, D.M. (1987), Elastic relationships in layered composite media with approximation for the case of thin films on a thick substrate, J. Appl. Phys., 62, 4438.
72. Venkatraman, R., Besser, P.R., Brennan, S., and Brauman, J. (1992), Determination of strain distributions in aluminium thin films as a function of temperature by the use of synchrotron grazing incidence X-ray scattering, Mat. Res. Soc. Symp. Proc., 239, 227.
73. Veprek, S. and Reprich, S. (1995), A concept for the design of novel superhard coatings, Thin Solid Films, 268, 64.
74. Vingsbo, O., Hogmark, S., Jönsson, B., and Ingemarsson, A. (1986), A., Microindentation Techniques in Materials Science and Engineering, Blau, P.J. and Lawn, B.R. (Eds.), ASTM publication 889, 257-271.
75. Voevodin, A.A., Donley, M.S., and Zabinski, J.S. (1997), Pulsed laser deposition of diamond-like carbon wear protective coatings: a review, Surf. Coat. Technol., 92, 42-49.
76. Voevodin, A.A., O’Neill, J.P., and Zabinski, J.S. (1998), Tribological performance and tribochemistry of nanocrystalline WC/amorphous diamond-like carbon composites, Thin Solid Films, 342, 194-200.
77. Wiklund, U., Hedenqvist, P., Hogmark, S., Stridh, B., and Arbell, M. (1996), Multilayer coatings as corrosion protection of Zircalloy, Surf. Coat. Technol., 86-87, 530-534.
78. Wiklund, U., Hedenqvist, P., and Hogmark, S. (1997), Multilayer cracking resistance in bending, Surf. Coat. Technol., 97, 773-778.
79. Wiklund, U. and Larsson, M. (1999a), Low friction PVD titanium-carbon coatings, Wear, 241, 234-238.
80. Wiklund, U., Gunnars, J., and Hogmark, S. (1999b), Influence of residual stresses on fracture and delamination of thin hard coatings, Wear, 232, 262-269.
81. Windischmann, H. (1992), Intrinsic stress in sputter-deposited thin films, Crit. Rev. Solid State and Mater. Sci., 17, 547.