Design and fabrication of bone tissue engineering scaffolds

Bone Tissue Engineering

Volumn , Issue , 2004, Pages 167-192

  Hollister, Scott J ^a   Taboas, Juan M ^a   Schek, Rachel M ^a   Lin, Cheng Yu ^a   Chu, Tien Min ^b  

^a UNIVERSITY OF MICHIGAN   (United States)

^b Indiana University Purdue University Indianapolis   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85056688248     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (33)

1. Bruder, S. P., Kraus, K. H. et al. (1998). Critical-sized canine segmental femoral defects are healed by autologous mesenchymal stem cell therapy. Trans. Annu Meeting Orthopaedic Res. Soc. 44, 147.
2. Mikos, A. G., Sarakinos, G. et al. (1993). Prevascularization of porous biodegradable polymer. Biotechnol. Bioeng. 42, 716-723.
3. Kühne, J.H., Bartl, R., Frisch, B., Hammer, C., Jansson, V. and Zimmer, M. (1994). Bone formation in coralline hydroxyapatite: effects of pore size studied in rabbits. Acta Orthop. Scand. 65, 2246-2252.
4. Grenga, T.E., Zins, J.E. and Bauer, T.W. (1989). The rate of vascularization of coralline hydroxyapatite. Plast. Reconstr. Surg. 84, 245-249.
5. Kuboki, Y., Jin, Q., Kikuchi, M., Mamood, J. and Takita, H. (2002). Geometry of artificial ECM: sizes of pores controlling phenotype expression in BMP-induced osteogenesis and chondrogenesis. Connect. Tissue Res. 43, 520-523.
6. Hui, P.W., Leung, P.C. and Sher, A. (1996). Fluid conductance of cancellous bone graft as a predictor for graft-host healing response. J. Biomech. 29,123-132.
7. Brand, R.A., Stanford, C.M. and Nicolella, D.P. (2001). Primary adult human bone cells do not respond to tissue (continuum) level strains. J. Orthop. Sci. 6, 295-301.
8. McCreadie, B.R. and Hollister, S.J. (1997). Strain concentrations surrounding an ellipsoid model of lacunae and osteocytes. Comput. Methods Biomech. Biomed. Eng. 1, 61-68.
9. Mullender, M.G. and Huiskes, R. (1997). Osteocytes and bone lining cells: which are the best candidates for mechano-sensors in cancellous bone?. Bone 20, 527-532.
10. Thomson, R.C., Yaszemski, M.J., Powers, J.M. and Mikos, A.G. (1995). Fabrication of biodegradable polymer scaffolds to engineer trabecular bone. J. Biomater. Sci. Polym. Ed. 7(1), 23-38
11. Mikos, A.G., Thorsen, A.J., Czerwonka, L.A., Bao, Y., Langer, R., Winslow, D.N. and Vacanti, J.P. (1994). Preparation and characterization of poly(l-lactic acid) foams. Polymer 35, 1068-1077.
12. Schugens, C., Maquet, V., Grandfils, C., Jerome, R. and Teyssie, P. (1996). Polylactide macroporous biodegradable implants for cell transplantation. 2. Preparation of polylactide foams by liquid-liquid phase separation. J. Biomed. Mater. Res. 30, 449-461.
13. Nam, Y.S. and Park, T.G. (1999). Porous biodegradable polymeric scaffolds prepared by thermally induced phase separation. J. Biomed. Mater. Res. 47(1), 8-17.
14. Hollister, S.J. and Kikuchi, N. (1994). Homogenization theory and digital imaging: a basis for studying the mechanics and design principles of bone tissue. Biotech. Bioeng. 43, 586-596.
15. Hornung, U., Ed. (1997). Homogenization and Porous Media. Springer-Verlag, New York.
16. Hollister, S.J., Maddox, R.D. and Taboas, J.M. (2002). Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints. Biomaterials 23, 4095-4103.
17. Sigmund, O. (1994). Materials with prescribed constitutive parameters - an inverse homogenization problem. Int. J. Solid Struct. 31, 2513-2329.
18. Lin, C.Y., Kikuchi, N. and Hollister, S.J. (2003). Scaffold internal architecture design for elastic properties and porosity by a topology microstructure optimization method. Proc. Soc. Biomater. 29, 354.
19. Svanberg, K. (1987). The method of moving asymptotes - a new method for structural optimization. Int. J. Numer. Methods Eng. 24, 359.
20. Dillow, A.K., Lowman, A.M., and Hudgins, K.A., eds., (2002). Biomimetic Materials and Design: Biointerfacial Strategies, Tissue Engineering, and Targeted Drug Delivery. Marcel-Dekker, Inc., New York.
21. Cooper, K.G. (2001). Rapid Prototyping Technology: Selection and Application. Marcel-Dekker, Inc., New York.
22. Zein, I., Hutmacher, D.W., Tan, K.C. and Teoh, S.H. (2002). Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials 23, 1169-1185.
23. Goldstein, S.A. (1987). The mechanical properties of trabecular bone: dependence on anatomic location and function. J. Biomech. 20, 1055-1061.
24. Sherwood, J.K., Riley, S.L., Palazzolo, R., Brown, S.C., Monkhouse, D.C., Coates, M., Griffith, L.G., Landeen, L.K. and Ratcliffe, A. (2002). A three-dimensional osteochondral composite scaffold for articular cartilage repair. Biomaterials 23, 4739-4751.
25. Fisher, J.P., Vehof, J.W.M., Dean, D., van der Waerden, J.P.C.M., Holland, T.A., Mikos, A.G. and Jansen, J.A. (2002). Soft and hard tissue response to photocrosslinked poly(propylene fumarate) scaffolds in a rabbit model. J. Biomed. Mater. Res. 59, 547-556.
26. Fisher, J.P., Dean, D. and Mikos, A.G. (2002). Photocrosslinking characteristics and mechanical properties of diethyl fumarate/poly(propylene fumarate) biomaterials. Biomaterials 23, 4333-4343.
27. Cooke, M.N., Fisher, J.P., Dean, D., Rimnac, C. and Mikos, A.G. (2002). Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth. J. Biomed. Mater. Res. Part B: Appl. Biomater. 64B, 65-69.
28. Das, S., Hollister, S.J., Flanagan, C., Adewunmi, A., Bark, K., Chen, C., Ramaswamy, K., Rose, D. and Widjaja, E. (2003). Freeform fabrication of Nylon-6 tissue engineering scaffolds, Rapid Prototyping J. 9, 43-49.
29. Chu, T.M.G., Halloran, J.W., Hollister, S.J. and Feinberg, S.E. (2001). Hydroxyapatite implants with designed internal architecture. J. Mater. Sci. Mater. Med. 12, 471-478.
30. Chu, T.M.G., Orton, D.G., Hollister, S.J., Feinberg, S.E. and Halloran, J.W. (2002). Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures. Biomaterials 23, 1283-1293.
31. Taboas, J.M., Maddox, R.D., Krebsbach, P.H. and Hollister, S.J. (2003). Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer- ceramic scaffolds. Biomaterials 24, 181-194.
32. Charriere, E., Terrazzoni, S., Pittet, C., Mordasini, Ph., Dutoit, M., Lemaitre, J. and Zysset, Ph. (2001). Mechanical characterization of brushite and hydroxyapatite cements. Biomaterials 22, 2937-2945.
33. Charriere, E., Lemaitre, J. and Zysset, Ph. (2003). Hydroxyapatite cement scaffolds with controlled macroporosity: fabrication protocol and mechanical properties. Biomaterials 24, 809-817.