Ceramic catalysts, supports, and filters for diesel exhaust after-treatment

Structured Catalysts and Reactors

Volumn , Issue , 2005, Pages 663-700

  Gulati, Suresh T ^a   Makkee, Michiel ^b   Setiabudi, Agus ^b  

^a Science and Technology Division ^*  (United States)

^b DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85056340411     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/9781420028003     Document Type: Chapter

References (92)

1. Yanowitz, J., McCormic, R.L., and Graboski, M.S., In-use emissions from heavy-duty diesel vehicles, Environ. Sci. Technol., 34, 729-740, 2000.
2. Abdel-Rahman, A.A., On the emission from internal-combustion engines: a review, Int. J. Energy Res., 22, 483-513, 1998.
3. Heywood, J.B., Internal Combustion Engine Fundamentals, McGraw-Hill, New York, 1988 p. 930.
4. Bérubé, K.A., Jones, T.P., Williamson, B.J., Winters, C., Morgan, A.J., and Richards, R.J., Physicochemical characterisation of diesel exhaust particles: factors for assessing biological activity, Atmos. Environ., 33, 1599-1614, 1999.
5. Mark, J. and Morey, C., Diesel Passenger Vehicles and the Environment, Union of Concerned Scientists, Berkeley, CA, 1999, pp. 6-15.
6. Johnson, J.H., Bagley, S.T., Gratz, L.D., and Leddy, D.G., A review of diesel particulate control technology, 1992 Horning memorial award lecture, SAE paper 940233, 1994.
7. Smith, O.I., Fundamentals of soot formation in flames in application to diesel engine particulate emissions, Prog. Energy Combust. Sci., 7, 275-291, 1981.
8. Saitoh, K., Sera, K., Shirai, T., Sato, T., and Odaka, M., Determination of elemental and ionic compositions for diesel exhaust particles by particle induced X-ray emission and ion chromatography analysis, Anal. Sci., 19, 525-528, 2003.
9. Challen, B. and Baranescu, R., Eds., Diesel Engine Reference Book, Butterworth-Heinemann, 1999.
10. Lepperhoff, G., Petters, K.-D., Baecker, H., and Pungs, A., The influence of diesel fuel composition on gaseous and particulate emissions, Int. J. Vehicle Design, 27, 10-19, 2001.
11. Pattas, K., Samaras, Z., Kyriakis, N., Pistikopoulos, P., Manikas, T., and Seguelong, T., An experimental study of catalytic oxidation of particulates in a diesel filter installed on a direct injection turbo-charged car, Topics Catal., 16/17, 255-262, 2001.
12. Guenther, M., Vaillancourt, M., and Polster, M., Advancements in Exhaust Flow Measurement Technology, SAE 2003 World Congress and Exhibition, Detroit, MI, March 2003, 2003-01-0780.
13. van Setten, B.A.A.L., Makkee, M., and Moulijn, J.A., Science and technology of catalytic diesel particulate filter, Catal. Rev. Sci. Eng., 43, 489-564, 2002.
14. Cooke, W.F. and Wilson, J.J.N., A global black carbon aerosol model, J. Geophys. Res., 101, 19395-19410, 1996.
15. Faiz, A., Weaver, C.S., and Walsh, M.P., Air Pollution from Motor Vehicles, Standard and Technology for Controlling Emission, World Bank, Washington, DC, 1996 p. 63.
16. Health Effect Institute, Understanding the Health Effects of Components of the Particulate Matter Mix: Progress and Next Step, HEI Perspectives, April 2002, p. 20.
17. Farleigh, A. and Kaplan, L., Danger of Diesel, U.S. Public Interest Research Group Education Fund, 2000 p. 6.
18. Tsien, A., Diaz-Sanxhez, D., Ma, J., and Saxon, A., The organic component of diesel exhaust particles and phenanthrene, a major polyaromatic hydrocarbon constituent, enhances IgE production by IgE-secreting EBV-transformed human B cells in vitro, Tox. Appl. Pharm., 142, 256-263, 1997.
19. http://www.dieselnet.com/standards/intro.html (accessed May 2004).
20. Neeft, J.P.A., Makkee, M., and Moulijn, J.A., Diesel particulate emission control, Fuel Process. Technol., 47, 1-69, 1996.
21. Gulati, S. Design Considerations for Diesel Flow Through Converters, SAE paper 920145, 1992.
22. Farrauto, R., Reducing Truck Diesel Emissions, Automotive Engineering, February 1992.
23. Stroom, P., Merry, R.P., and Gulati, S., Systems Approach to Packaging Design for Automotive Catalytic Converters, SAE paper 900500, 1990.
24. Eastwood, P., Critical Topics in Exhaust Gas Aftertreatment, Research Studies Press, Baldock, U.K., 2000.
25. Merkel, G., Beall, D., Hickman, D., and Vernacotola, M., Effects of Microstructure and Cell Geometry on Performance of Cordierite Diesel Particulate Filters, SAE 2001 World Congress, Detroit, MI, March 2001, 2001-01-0193.
26. Inui, T., Otawa, T., and Takegami, Y., Enhancement of oxygen transmission in the oxidation of active carbon by composite catalyst, J. Catal., 76, 84-92, 1982.
27. Lôwe, A. and Mendoza-Frohn, C., Zum Problem der Dieselruß-Verbrennung auf einem katalysatorbeschicteten Filter: Der Kontakt zwischen Katalysator und Feststoff, Chem. Ing. Tech., 62, 759-762, 1990.
28. Neeft, J.P.A., Makkee, M., and Moulijn, J.A., Metal oxides as catalysts for the oxidation of soot, Chem. Eng. J., 64, 295-302, 1996.
29. Neeft, J.P.A., van Pruisen, O.P., Makkee, M., and Moulijn, J.A., Catalyst for the oxidation of soot from diesel exhaust gases: II. Contact between soot and catalyst under practical condition, Appl. Catal. B, 12, 21-31, 1997.
30. 2, J. Catal., 179, 258-266, 1998.
31. Watabe, Y., Yamada, C., Irako, K., and Murakami, Y., Catalyst for Use in Cleaning Exhaust Gas Particulate, European Patent 0,092,023, October 26, 1983.
32. Mul, G., Neeft, J.P.A., Kapteijn, F., Makkee, M., and Moulijn, J.A., Soot oxidation catalysed by Cu/K/Mo/Cl catalyst: evaluation of the chemistry and performance of the catalyst, Appl. Catal. B, 6, 339-352, 1995.
33. Neeft, J.P.A., Schipper, W., Mul, G., Makkee, M., and Moulijn, J.A., Feasibility study towards Cu/K/Mo/(Cl) soot oxidation for the application in diesel exhaust gases, Appl. Catal. B, 11, 365-382, 1997.
34. Neeft, J.P.A., Makkee, M., and Moulijn, J.A., Catalyst for the oxidation of soot from diesel exhaust gases: I. An exploratory study, Appl. Catal. B, 8, 57-78, 1996.
35. Ciambelli, P., Corbo, P., Parrela, P., Palma, V., and Sciallo, M., Catalytic oxidation from diesel exhaust gases: 1. Screening of metal oxide catalysts by TG-DTG-SDTA analysis, Thermochim. Acta, 162, 83-89, 1990.
36. Ciambelli, P., Palma, V., Russo, P., and Vaccaro, S., The effect of NO on Cu/V/K/Cl catalysed soot combustion, Appl. Catal. B, 22, L5-L10, 1999.
37. Ciambelli, P., Palma, V., and Vaccaro, S., Low temperature carbon particulate oxidation on a supported Cu/V/K catalyst, Catal. Today, 17, 71-78, 1993.
38. Ciambelli, P., Parrella, P., and Vaccaro, S., Kinetic of soot oxidation on potassium-copper--vanadium catalyst, in Catalysis and Automotive Pollution Control II, Vol. 71, Crucq, A., Ed., Elsevier, Amsterdam, 1991, pp. 323-350.
39. Badini, C., Serra, V., Saracco, G., and Montorsi, M., Thermal stability of Cu-K-V catalyst for diesel soot combustion, Catal. Lett., 37, 247-254, 1996.
40. Badini, C., Saracco, G., Serra, V., and Specchia, V., Suitability of some promising soot combustion catalyst for application in diesel exhaust after-treatment, Appl. Catal. B, 18, 137-150, 1998.
41. Badini, C., Saracco, G., and Serra, V., Combustion of carbonaceous materials by Cu-K-V based catalyst: I. Role of copper and potassium vanadate, Appl. Catal. B, 11, 307-328, 1997.
42. Serra, V., Badini, C., Saracco, G., and Specchia, V., Combustion of carbonaceous materials by Cu-K-V based catalyst: II. Reaction mechanism, Appl. Catal. B, 11, 329-346, 1997.
43. Mul, G., Kapteijn, F., and Moulijn, J.A., Catalytic oxidation of model soot by metal oxide, Appl. Catal. B, 12, 33-47, 1997.
44. Querini, C.A., Ulla, M.A., Requejo, F., Soria, J., Sedrán, U.A., and Miró, E.E., Catalytic combustion of diesel soot particles. Activity and characterisation of Co/MgO and Co, K/MgO catalyst, Appl. Catal. B, 15, 5-19, 1998.
45. Badini, C., Saracco, G., and Specchia, V., Combustion of particulate catalysed by mixed potassium vanadates, Catal. Lett., 55, 201-206, 1998.
46. Ahlström, A.F. and Odenbrand, C.U.I., Combustion of soot deposit from diesel engines on mixed composite oxide, Appl. Catal., 60, 157-172, 1990.
47. Jelles, S.J., van Setten, B.A.A.L., Makkee, M., and Moulijn, J.A., Molten salts as promising catalysts for oxidation of diesel soot: importance of experimental conditions in testing procedures, Appl. Catal. B, 21, 35-49, 1999.
48. x on soot combustion with supported molten salt catalysts, React. Kinet. Catal. Lett., 67, 3-7, 1999.
49. van Setten, B.A.A.L., Jelles, S.J., Makkee, M., and Moulijn, J.A., The potential of supported molten salts in the removal of soot from diesel exhaust gas, Appl. Catal. B, 21, 51-61, 1999.
50. van Setten, B.A.A.L., Bremmer, J., Jelles, S.J., Makkee, M., and Moulijn, J.A., Ceramic foam as a potential molten salt oxidation catalyst support in the removal of soot from diesel exhaust gas, Catal. Today, 53, 613-621, 1999.
51. Lepperhof, G., Lüders, H., Barthe, P., and Lemaire, J., Quasi-Continuous Particle Trap Regeneration by Cerium Additives, SAE paper 950369, 1995.
52. x on the oxidation of metal activated soot, Catal. Today, 53, 623-630, 1999.
53. Valentine, J.M., Peter-Hoblyn, J.D., and Acress, G.K., Emissions Reduction and Improved Fuel Economy Performance from a Bimetallic Platinum/Cerium Diesel Fuel Additive at Ultra-Low Dose Rate, SAE 2000 Spring Fuel and Lubricants Meeting and Exposition, Paris, June 2000, 2000-01-1934.
54. Cooper, B.J. and Thoss, J.E., Role of NO in Diesel Emission Control, SAE paper 890404, 1989.
55. Arthur, J.R., Ferguson, H.F., and Lauber, K., Comparative rates of the slow combustion of coke in oxygen and nitrogen dioxide, Nature, 178, 206-207, 1956.
56. Baumgarten, E. and Schuck, A., Oxygen spillover and possible role in coke burning, Appl. Catal., 37, 247-257, 1988.
57. Baker, R.Y.K. and Chludzinski, J.J., Catalytic gasification of graphite by chromium and copper in oxygen, steam, and hydrogen, Carbon, 19, 75-82, 1981.
58. Howitt, J. and Montierth, M., Cellular Ceramic Diesel Particulate Filter, SAE paper 810114, 1981.
59. Howitt, J., Elliott, W., Morgan, J., and Dainty, E., Application of a Ceramic Wall-Flow Filter to Underground Diesel Emissions Reduction, SAE paper 830181, 1983.
60. Wade, W., White, J., and Florek, J., Diesel Particulate Trap Regeneration Techniques, SAE paper 810118, 1981.
61. Murtagh, M.J., Sherwood, D., and Socha, L., Development of a Diesel Particulate Composition and Its Effect on Thermal Durability and Filtration Performance, SAE paper 940235, 1994.
62. Cutler, W. and Merkel, G., A New High Temperature Ceramic Material for Diesel Particulate Filter Applications, International Fuels and Lubricants Meeting and Exposition, Baltimore, MD, October 2000, SAE 2000-01-2844.
63. Merkel, G., Cutler, W., and Warren, C., Thermal Durability of Wall-Flow Diesel Particulate Filters, SAE 2001 World Congress, Detroit, MI, March 2001, 2001-01-0190.
64. Miwa, S., Diesel Particulate Filters Made from Newly Developed SiC and Newly Developed Oxide Composite Material, SAE 2001 World Congress, Detroit, MI, March 2001, 2001-01-0192.
65. Ohno, K., Shimato, K., Taoka, N., Santae, H., Ninomiya, T., Komori, T., and Salvat, O., Characterization of SiC-DPF for Passenger Car, SAE 2000 World Congress, Detroit, MI, March 2000, 2000-01-0185.
66. Amann,, C., Stivender, D., Plee, S., and MacDonald, J., Some Rudiments of Diesel Particulate Emissions, SAE paper 800251, 1980.
67. Weaver, C., Particulate Control Technology and Particulate Standards for Heavy Duty Diesel Engines, SAE paper 840174, 1984.
68. Gulati, S. and Helfinstine, J., High Temperature Fatigue in Ceramic Wall-Flow Diesel Filters, SAE paper 850010, 1985.
69. Gulati, S. and Sherwood, D., Dynamic Fatigue Data for Cordierite Ceramic Wall-Flow Diesel Filters, SAE paper 910135, 1991.
70. Gulati, S., Ceramic catalyst supports for gasoline fuel, in Structured Catalysts and Reactors, Cybulski, A. and Moulijn, J.A., Eds., Marcel Dekker, New York, 1996, pp. 15-58.
71. Gulati, S., Ceramic catalyst supports and filters for diesel exhaust aftertreatment, in Structured Catalysts and Reactors, Cybulski, A. and Moulijn, J.A., Eds., Marcel Dekker, New York, 1996, pp. 501-542.
72. Brown, G., Unit Operations, Wiley, New York, 1955.
73. Carman, P., Flow of Gases through Porous Media, Butterworth, London, 1956.
74. Gulati, S., Thermal Stresses in Ceramic Wall-Flow Diesel Filters, SAE paper 830079, 1983.
75. Vergeer, H., Gulati, S., Morgan, J., and Dainty, E., Electrical Regeneration of Ceramic Wall-Flow Diesel Filter for Underground Mining Application, SAE paper 850152, 1985.
76. Gulati, S., Strength and Thermal Shock Resistance of Segmented Wall-Flow Diesel Filters, SAE paper 860008, 1986.
77. Gulati, S. and Lambert, D., Fatigue-Free Performance of Ceramic Wall-Flow Diesel Particulate Filter, ENVICERAM’91, Saarbrucken, 1991.
78. Gulati, S., Lambert, D., Hoffman, M., and Tuteja, A., Thermal Durability of Ceramic Wall-Flow Diesel Filter for Light Duty Vehicles, SAE paper 920143, 1992.
79. Wiederhorn, S.M., Subcritical crack growth in ceramics, in Fracture Mechanics of Ceramics, Vol. 2, Bradt, R.C., Hasselman, D.P., and Lange, F.F., Eds., Plenum Press, New York, 1974, pp. 613-646.
80. Ritter, J.E., Engineering design and fatigue failure of brittle materials, in Fracture Mechanics of Ceramics, Vol. 4, Bradt, R.C., Hasselman, D.P., and Lange, F.F., Eds., Plenum Press, New York, 1978, pp. 667-686.
81. Gulati, S., Sherwood, D., and Corn, S.H., Robust Packaging System for Diesel/Natural Gas Oxidation Catalysts, SAE paper 960471, 1996.
82. Hickman, D., Diesel Particulate Filter Regeneration: Thermal Management Through Filter Design, International Fuels and Lubricants Meeting and Exposition, Baltimore, MD, October 2000, SAE 2000-01-2847.
83. Johnson, T., Diesel Emission Control Technology in Review, SAE 2001 World Congress, Detroit, MI, March 2001, 2001-01-0184.
84. http://www.psa.fr (accessed May 2004).
85. http://www.dieselnet.com/news/0210rhodia.html (accessed September 2003).
86. Hawker, P., Myers, N., Hürthwohl, G., Voge, H.Th., Bates, B., Magnusson, L., and Bronnenberg, P., Experience with a New Particulate Trap Technology in Europe, International Congress and Exposition, Detroit, MI, February 1997, SAE 970182.
87. Allanson, R., Cooper, B.J., Thoss, J.E., Uusimaki, A., Walker, A.P., and Warren, J.P., European Experience of High Mileage Durability of Continuously Regenerating Diesel Particulate Filter, SAE 2000 World Congress, Detroit, MI, March 2000, 2000-01-0480.
88. Allanson, R., Blakeman, P.G., Cooper, B.J., Hess, H., Silcock, P.J., and Walker, A.P., Optimizing the Low Temperature Performance and Regeneration Efficiency of the Continuously Regenerating Diesel Particulate Filter (Cr-DPF) System, SAE 2002 World Congress and Exhibition, Detroit, MI, March 2002, 2002-01-0428.
89. x Reduction System for Diesel Engines, SAE 2002 World Congress and Exhibition, Detroit, MI, March 2002, 2002-01-0957.
90. Itoh, K., Tanaka, T., Hirota, S., Asanuma, T., Kimura, K., and Nakatani, K., Exhaust Purifying Method and Apparatus of an Internal Combustion Engine, U.S. Patent 6,594,991, July 22, 2003.
91. McDonald, J. and Bunker, B., Testing of the Toyota Avensis DPNR at U.S. EPA-NVFEL, SAE paper 2002-01-2877, 2002.
92. Heck, R.M., Farrauto, R.J., and Gulati, S.T., Catalytic Air Pollution Control: Commercial Technology, 2nd Edn., John Wiley & Sons, New York, 2002.