Rapid solidification and bulk metallic glasses - processing and properties

Materials Processing Handbook

Volumn , Issue , 2007, Pages 385-428

  Löffler, Jörg F ^a   Kündig, Andreas A ^a   Dalla Torre, Florian H ^a  

^a ETH ZURICH   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85056028312     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (207)

1. Buckel, W. and Hilsch, R., Supraleitung und Widerstand von Zinn mit Gitterstörungen (Mitteilungen zur Supraleitung II). Z. Phys. 131, 420, 1952.
2. Klement, W., Willens, R.H., and Duwez, P., Non-crystalline structure in solidified gold-silicon alloys. Nature187, 869, 1960.
3. Duwez, P., Structure and properties of alloys rapidly quenched from the liquid state. ASM Trans. Quart. 60, 607, 1967.
4. Cahn, R.W., Metallic glasses. Contemp. Phys. 21, 43, 1980.
5. Turnbull, D., Metastable structures in metallurgy. Metall. Trans. A12, 695, 1981.
6. Johnson, W.L., Metallic glasses. Metals Handbook2, 805,1990.
7. Johnson, W.L., Metastable phases (Chap. 29), in Intermetallic Compounds: Vol. 1, Principles, J.H. Westbrook and R.L. Fleischer (Eds.), John Wiley &Sons Ltd., Chichester, 1994, p. 687.
8. Inoue, A., Bulk Amorphous Alloys, Preparation and Fundamental Characteristics. Trans. Tech. Publ., Switzerland, 1998.
9. Johnson, W.L., Bulk glass-forming metallic alloys: Science and technology. MRS Bull. 24, 42, 1999.
10. Inoue, A., Stabilization of metallic supercooled liquid and bulk amorphous alloys. Acta Mater. 48, 279, 2000.
11. Löffler, J.F., Bulk metallic glasses. Intermetallics11, 529, 2003; reprinted from J. F. Löffler, in The Encyclopedia of Materials: Science and Technology, K.H.J. Buschow, R.W. Cahn, M.C. Flemings, B. Ilschner, E.J. Kramer, and S. Mahajan (Eds.), Pergamon/Elsevier Science, Amsterdam, 2003.
12. Löffler, J.F., Recent progress in the area of bulk metallic glasses. Z. Metallkd. 97, 225, 2006.
13. Schwarz, R.B. and Johnson, W.L., Formation of an amorphous alloy by solid-state reaction of the pure polycrystalline metals. Phys. Rev. Lett. 51, 415, 1983.
14. Russell, K.C., Phase stability under irradiation. Prog. Mater. Sci. 28, 229,1984.
15. Ponyatovsky, E.G. and Barkalov, O.I., Pressure-induced amorphous phases. Mater. Sci. Eng. Rep. 8, 147, 1992.
16. Schultz, L. and Eckert, J., Mechanically alloyed glassy metals. Topics Appl. Phys. 72, 69, 1994.
17. Valiev, R.Z., Islamgaliev, R.K., and Alexandrov, I.V., Bulk nanostructured materials from severe plastic deformation. Prog. Mater. Sci. 45, 103, 2000.
18. Duwez, P., Willens, R.H., and Klement Jr., W., Continuous series of metastable solid solutions in silver-copper alloys. J. Appl. Phys. 31, 1136, 1960.
19. Duwez, P., Metallic glasses-historical background (Chap. 2), in Glassy Metals I (Topics in Applied Physics, Vol. 46), H.J. Güntherodt and H. Beck (Eds.), Springer, Berlin, 1981, p. 19.
20. Jones, H., Splat cooling and metastable phases. Rep. Prog. Phys. 36, 1425,1973.
21. Chen, H.S. and Turnbull, D., Formation, stability and structure of palladium-silicon based alloy glasses. Acta Metall. 17, 1021, 1969.
22. Gibbs, J.H. and DiMarzio, E.A., Nature of the glass transition and the glassy state. J. Chem. Phys. 28,373, 1958.
23. Cohen, M.H. and Turnbull, D., Molecular transport in liquids and glasses. J. Chem. Phys. 31, 1164,1959.
24. Cohen, M.H. and Turnbull, D., Composition requirements for glass formation in metallic and ionic systems. Nature189,131,1961.
25. Turnbull, D., Under what conditions can a glass be formed?Contemp. Phys. 10, 473,1969.
26. Smith, C.H., Applications of rapidly solidified soft magnetic alloys (Chap. 19), in Rapidly Solidified Alloys: Processes, Structure, Properties, Applications, H.H. Liebermann (Ed.), Dekker Inc., New York, 1993, p. 617.
27. Liebermann, H.H. and Graham Jr., C.D., Production of amorphous alloy ribbons and effects of apparatus parameters on ribbon dimensions. IEEE Trans. Mag. 12, 921,1976.
28. Chen, H.S., Thermodynamic considerations on the formation and stability of metallic glasses. Acta Metall. 22, 1505,1974.
29. 5 and their surface characteristics. Appl. Phys. Lett. 40, 383,1982.
30. 20. Appl. Phys. Lett. 41, 716, 1982.
31. Kui, H.W., Greer, A.L., and Turnbull, D., Formation of bulk metallic glass by fluxing. Appl. Phys. Lett. 45, 615, 1984.
32. Inoue, A., Zhang, T., and Masumoto, T., Zr-Al-Ni amorphous alloys with high glass-transition temperature and significant supercooled liquid region. Mater. Trans., JIM31, 177,1990.
33. Inoue, A. et al., Mg-Cu-Y amorphous alloys with high mechanical strengths produced by a metallic mold casting method. Mater. Trans., JIM32, 609, 1991.
34. Inoue, A. et al., Bulk La-Al-TM (TM = transition-metal) amorphous alloy with high tensile strength produced by a high-pressure die-casting method. Mater. Trans., JIM34, 351,1993.
35. 5. Appl. Phys. Lett. 63, 2342, 1993.
36. Peker, A. and Johnson, W.L., Be bearing amorphous metallic alloys formed at low cooling rates, U.S. Patent No. 5,288,344, 1993.
37. Lin, X.H. and Johnson, W.L., Formation of Ti-Zr-Cu-Ni bulk metallic glasses. J. Appl. Phys. 78, 6514,1995.
38. Davies, H.A., Metallic glass formation (Chap. 2), in Amorphous Metallic Alloys, F.E. Luborsky (Ed.), Butterworths Monographs in Materials, London, 1983, p. 8.
39. Bennet, C.H., Serially deposited amorphous aggregates of hard spheres. J. Appl. Phys. 43, 2727, 1972.
40. Rahman, A., Mandell, M.J., and McTague, J.P., Molecular-dynamics study of an amorphous Lennard-Jones system at low-temperature. J. Chem. Phys. 64, 1564,1976.
41. Kramer, J., Non conductive transformations in metal. Ann. Phys. 19, 37,1934.
42. Allen, R.P., Dahlgren, S.D., and Merz, M.D., in Rapidly Quenched Metals II, N.J. Grant and B.C. Giessen (Eds.), MIT Press, Cambridge, 1976, p. 37.
43. Granqvist, C.G. and Buhrman, R.A., Ultrafine metal particles. J. Appl. Phys. 47, 2200, 1976.
44. Birringer, R. et al., Nanocrystalline materials — An approach to a novel solid structure with gas-like disorder. Phys. Lett. A 102, 365, 1984.
45. Gleiter, H., Nanocrystalline materials. Prog. Mater. Sci. 33, 223, 1989.
46. Gleiter, H., Nanostructured materials: Basic concepts and microstructure. Acta Mater. 48, 1, 2000.
47. Cahn, R.W., Background to rapidly solidification processes (Chap. 1), in Rapid Solidified Alloys, H.H. Liebermann (Ed.), Dekker Inc., New York, 1993, p. 5.
48. Polk, D., Method of continuous casting metal filament on interior groove of chill roll, U.S. Patent 3,881,542 (1975).
49. Kavesh, S., Method of forming metallic filament cast on interior surface of inclined annular quench roll, U.S. Patent 3,881,540 (1975).
50. Pond, R.B. and Maddin, R., A method of producing rapidly solidified filamentary castings. Trans, Met. Soc. AIME245, 2475, 1969.
51. Ohnaka, I. and Fukusako, T., Production of metallic filament by ejecting molten lead into water or atmosphere and stability of molten lead jet. J. Japan Inst. Met. 42, 415, 1978.
52. Narasimhan, M.C., Continuous casting method for metallic strips, U.S. Patent 4,142,571 (1979).
53. Anantharaman, T.R. and Suryanarayana, C., Rapidly Solidified Metals. Trans. Tech. Publ., Switzerland, 1987.
54. Löffler, J.F. and Johnson, W.L., Crystallization of Mg-Al and Al-based metallic liquids under ultra-high gravity. Intermetallics10,1167, 2002.
55. Löffler, J.F. et al., Eutectic isolation in Mg-Al-Cu-Li(-Y) alloys by centrifugal processing. Phil. Mag. 83, 2797, 2003.
56. 10. Phil. Mag. Lett. (in press).
57. Egami, T., Atomic structure of rapidly solidified alloys (Chap. 9), in Rapidly Solidified Alloys, H.H. Liebermann (Ed.), Dekker Inc., New York, 1993, p. 231.
58. Warren, B.E., X-ray diffraction. Dover, New York, 1969.
59. Wagner, C.N.J., Direct methods for the determination of atomic-scale structure of amorphous solids (x-ray, electron, and neutron scattering). J. Non-Cryst. Solids31, 1,1978.
60. Löffler, J.F. and Weissmüller, J., Grain-boundary atomic structure in nanocrystalline palladium from x-ray atomic distribution functions. Phys. Rev. B52, 7076,1995.
61. 30binary glassy alloy. Appl. Phys. Lett. 79, 412, 2001.
62. Saida, J., Matsushita, M., and Inoue, A., Nanoicosahedral quasicrystalline phase in Zr-Pd and Zr-Pt binary alloys. J. Appl. Phys. 90, 4717, 2001.
63. Bernal, J.D., Geometrical approach to the structure of liquids. Nature183,141, 1959.
64. Bernal, J.D., Co-ordination of randomly packed spheres. Nature188, 910, 1960.
65. Scott, G.D., Packing of equal spheres. Nature188, 908,1960.
66. Finney, J.L., Random packings and structure of simple liquids. 1. Geometry of random close packing. Proc. Roy. Soc. London Ser. A-Math Phys. Sci. 319, 479, 1970.
67. Finney, J.L., Random packings and structure of simple liquids. 2. Molecular geometry of simple liquids. Proc. Roy. Soc. London Ser. A-Math. Phys. Sci. 319, 495, 1970.
68. 14B6 studied by energy dispersive x-ray diffraction. J. Mater. Sci. 13, 2587, 1978.
69. Srolovitz, D., Egami, T., and Vitek, V., Radial distribution function and structural relaxation in amorphous solids. Phys. Rev. B24, 6936, 1981.
70. Gaskell, P.H., A new structural model for amorphous transition metal silicides, borides, phosphides and carbides. J. Non-Cryst. Solids32, 207, 1979.
71. Zallen, R., The Physics of Amorphous Solids. Wiley-VCH, Weinheim, 2004.
72. Polk, D.E., Structural model for amorphous metallic alloys. Scripta Metall. 4,117, 1970.
73. Inoue, A. et al., High packing density of Zr- and Pd-based bulk amorphous alloys. Mater. Trans., JIM39, 318, 1998.
74. 5 bulk metallic glass under high pressure. Phys. Rev. B62, 112-92, 2000.
75. Egami, T. and Waseda, Y., Atomic size effect on the formability of metallic glasses. J. Non-Cryst. Solids64, 113, 1984.
76. Zhang, T., Inoue, A., and Masumoto, T., Amorphous Zr-Al-Tm (Tm = Co, Ni, Cu) alloys with significant supercooled liquid region of over 100 K. Mater. Trans., JIM32,1005,1991.
77. Miracle, D.B., Sanders, W.S., and Senkov, O.N., The influence of efficient atomic packing on the constitution of metallic glasses. Phil. Mag. 83, 2409, 2003.
78. Lu, Z.P. and Liu, C.T., Glass formation criterion for various glass-forming systems. Phys. Rev. Lett. 91, 115-505, 2003.
79. Inoue A. and Takeuchi, A., Recent progress in bulk glassy alloys. Mater. Trans. JIM43, 1892, 2002.
80. Inoue, A., Bulk glassy and nonequilibrium crystalline alloys by stabilization of supercooled liquid: fabrication, functional properties and applications (Part 1), Proc. Jpn. Acad. Ser. B81, 156, 2005.
81. Boudreaux, D.S., Structure of metallic glass alloys (Chap. 1),in Glassy Metals: Magnetic, Chemical and Structural Properties, R. Hasegawa (Ed.), CRC Press, Boca Raton, FL, 1983, p. 1.
82. Eckert, J. et al., Crystallization behavior and phase formation in Zr-Al-Cu-Ni metallic glass containing oxygen. Mater. Trans., JIM39, 623,1998.
83. 5 bulk glass. Appl. Phys. Lett. 77, 3935, 2000.
84. Loffler, J.F. et al., Structural and electronic properties of Zr-Ti-Cu-Ni-Be alloys. Mat. Res. Soc. Symp. Proc. 644, L1.9.1, 2001.
85. Pekarskaya, E., Loffler, J.F., and Johnson, W.L., Microstructural studies of crystallization of a Zr-based bulk metallic glass. Acta Mater. 51, 4045, 2003.
86. Frank, F.C., Supercooling of liquids. Proc. Roy. Soc. A, 215, 43,1952.
87. Nelson, D.R., Order, frustration, and defects in liquids and glasses. Phys. Rev. B28, 5515, 1983.
88. 5 bulk metallic glass studied byXRD, SANS, and NMR. J. Non-Cryst. Solids317, 118, 2003.
89. Waniuk, T.A., Schroers, J., and Johnson, W.L., Timescales of crystallization and viscous flow of the bulk glass-forming Zr-Ti-Ni-Cu-Be alloys. Phys. Rev. B67,184-203, 2003.
90. Holland-Moritz, D., Herlach, D.M., and Urban, K., Observation of the undercoolability of quasicrystal-forming alloys by electromagnetic levitation. Phys. Rev. Lett. 71, 1196, 1993.
91. 5 bulk metallic glass forming alloys. J. Appl. Phys. 87, 7242, 2000.
92. 20. Acta Mater. 52, 667, 2004.
93. Lu, I.R. et al., Thermodynamic properties of Pd-based glass-forming alloys. J. Non-Cryst. Solids252, 577, 1999.
94. 5 alloy using the containerless electrostatic levitation processing technique. Appl. Phys. Lett. 68,1057, 1996.
95. Uhlmann, D.R., Glass formation. J. Non-Cryst. Solids25, 42,1977.
96. Angell, C.A. and Sichina, W., Thermodynamics of the glass transition: empirical aspects. Ann. New York Acad. Sci. 279, 53,1976.
97. Angell, C.A., Formation of glasses from liquids and biopolymers. Science267,1924, 1995.
98. 5 bulk metallic glass forming alloy. Acta Mater. 46,4725, 1998.
99. 5 bulkmetallic glassforming liquid and viscous flow during relaxation, phase separation, and primary crystallization. Acta Mater. 46, 5229, 1998.
100. 5. Phys. Rev. Lett. 82, 2290, 1999.
101. Mukherjee, S., Johnson, W.L., and Rhim, W.K., Noncontact measurement of high-temperature surface tension and viscosity of bulk metallic glass-forming alloys using the drop oscillation technique. Appl. Phys. Lett. 86, 014-104, 2005.
102. Johnson, W.L., Physics and metallurgy of bulk glass forming alloys, in Science of Alloys for the 21st Century: A Hume-Rothery Symposium Celebration, P.E.A. Turchi, R.D. Shull, and A. Gonis (Eds.), The Minerals, Metals &Materials Society, 2000, p. 183.
103. 10 bulk metallic glass forming liquid. J. Appl. Phys. 83, 4134,1998.
104. 5 alloy. J. Appl. Phys. 77, 4039,1995.
105. Chen, H.S., A method for evaluating viscosities of metallic glasses from the rates of thermal transformations. J. Non-Cryst. Solids27, 257, 1978.
106. Marcus, M. and Turnbull, D., On the correlation between glass-forming tendency and liquidus temperature in metallic alloys. Mater. Sci. Eng. 23, 211, 1976.
107. 20. Appl. Phys. Lett. 77, 681, 2000.
108. Rhim, W.K. et al., An electrostatic levitator for high-temperature containerless materials processing in 1-g. Rev. Sci. Instrum. 64, 2961, 1993.
109. Johnson, W.A. and Mehl, R.F., Reaction kinetics in processes of nucleation and growth. Trans. Am. Inst. Min. Metall. Eng. 135, 416,1939.
110. Avrami, M., Kinetics of phase change III: Granulation, phase change an microstructures. J. Chem. Phys. 9, 177, 1941.
111. Nishiyama, N. and Inoue, A., Supercooling investigation and critical cooling rate for glass formation in Pd-Cu-Ni-P alloy. Acta Mater. 47, 1487, 1999.
112. 5 alloy. Appl. Phys. Lett. 68, 493, 1996.
113. 5. Appl. Phys. Lett. 76, 3394, 2000.
114. Löffler, J.F. et al., Comparison of the decomposition and crystallization behavior of Zr and Pd based bulk amorphous alloys. Mater. Sci. Forum343, 179, 2000.
115. Schroers, J. et al., Pronounced asymmetry in the crystallization behavior during constant heating and cooling of a bulk metallic glass-forming liquid. Phys. Rev. B60, 11858, 1999.
116. Löffler, J.F. et al., Crystallization of bulk amorphous Zr-Ti(Nb)-Cu-Ni-Al. Appl. Phys. Lett. 77, 525, 2000.
117. Kündig, A.A. et al., Influence of decomposition on the thermal stability of undercooled Zr-Ti-Cu-Ni-Al alloys. Scripta Mater. 44, 1269, 2001.
118. Schroers, J., The Superplastic Forming of Bulk Metallic Glasses. J. Mater. JOM57, 35, 2005.
119. Zhang, B. et al., Amorphous metallic plastic. Phys. Rev. Lett. 94, 205-502, 2005.
120. Schroers, J. et al., Gold based bulk metallic glass. Appl. Phys. Lett. 87, 061912, 2005.
121. Ma, H. et al., Doubling the critical size for bulk metallic glass formation in the Mg-Cu-Y ternary system. J. Mater. Res. 20, 2252, 2005.
122. Inoue, A., Zhang, T., and Masumoto, T., Al-La-Ni amorphous alloys with a wide supercooled liquid region. Mater. Trans. JIM30, 965, 1989.
123. Schroers, J. and Johnson, W.L., Highly processable bulk metallic glass-forming alloys in the Pt-Co-Ni-Cu-P system. Appl. Phys. Lett. 84, 3666, 2004.
124. 2o alloy cylinder of 72 mm in diameter. Mater. Trans. JIM38, 179, 1997.
125. 10 alloy in the supercooled liquid state. Proceedings of the 22nd Riso International Symposium on Materials Science, 423, 2001.
126. Pryds, N.H. et al., Preparation and properties of Mg-Cu-Ybulk amorphous alloys. Mater. Trans., JIM41, 1435, 2000.
127. 20 metallic glass. Mater. Trans., JIM40, 794,1999.
128. 15 glassy alloy with wide supercooled liquid region. Appl. Phys. Lett. 69, 1208, 1996.
129. Kündig, A.A., Schweizer, T., Schafler, E., and Löffler, J.F., Metallic glass/polymer composites by co-processing at similar viscosities. Scripta Mater. 56, 289, 2007.
130. Kündig, A.A. et al., Preparation of high aspect ratio surface microstructures out of a Zr-based bulk metallic glass. Microeletr. Eng. 67, 405, 2003.
131. Chokshi, A.H., Mukherjee, A.K., and Langdon, T.G., Superplasticity in advanced materials. Mater. Sci. Eng. R10, 237, 1993.
132. Kawamura, Y. et al., Full strength compacts by extrusion of glassy metal powder at the supercooled liquid state. Appl. Phys. Lett. 67, 2008, 1995.
133. Saotome, Y., Zhang, T., and Inoue, A. Microforming of MEMS parts with amorphous alloys. Mat. Res. Soc. Symp. Proc. 554, 385,1999.
134. Zumkley, T. et al., Superplastic forging of ZrTiCuNiBe-bulk glass for shaping of microparts. Mater. Sci. Forum386-388, 541, 2002.
135. Saotome, Y. et al., The microformability of Pt-based metallic glass and the nanoforming of three-dimensional structures. Intermetallics10,1241, 2002.
136. 5 amorphous alloy in the supercooled liquid state. Mater. Sci. Eng. A304-306, 716, 2001.
137. Herzer, G., Nanocrystalline soft magnetic materials. J. Magn. Magn. Mater. 112, 258,1992.
138. Löffler, J.F., Braun, H.B., and Wagner, W., Magnetic correlations in nanostructured ferromagnets. Phys. Rev. Lett. 85, 1990, 2000.
139. Mizoguchi, T., Intrinsic magnetic properties of rapidly solidified alloys (Chap. 16), in Rapidly Solidified Alloys: Processes, Structure, Properties, Applications, H.H. Liebermann (Ed.), Dekker Inc., New York, 1993, p. 461.
140. Hernando, A. and Vázquez, M., Engineering magnetic properties (Chap. 17), in Rapidly Solidified Alloys: Processes, Structure, Properties, Applications, H.H. Liebermann (Ed.), Dekker Inc., New York, 1993, p. 553.
141. Spaepen, F., A microscopic mechanism for steady state inhomogeneous flow in metallic glasses. Acta Metall. 25, 407, 1977.
142. Masumoto, T. and Maddin, R., Mechanical properties of palladium 20 a/o silicon alloy quenched from liquid state. Acta Metall. 19, 725, 1971.
143. 20. Appl. Phys. Lett. 73, 3665, 1998.
144. 8Cu12.5Ni10Be22.5 bulk metallic glass over a wide range of strain-rates and temperatures. Acta Mater. 51, 3429, 2003.
145. Safarik, D.J., Cady, C.M., and Schwarz, R.B., Shear processes in bulk metallic glasses. Acta Mater. 53,2193,2005.
146. Chen, H. S., Kato, H., and Inoue, A., A fictive stress model and nonlinear viscoelastic behaviors in metallic glasses. Mater. Trans. 42, 59, 2001.
147. Argon, A.S., Plastic deformation in metallic glass. Acta Metall. 27, 47,1978.
148. Lewandowski, J.J. and Greer, A.L., Temperature rise at shear bands in metallic glasses. Nature Mater. 5, 15, 2006.
149. Yang, B. et al., Dynamic evolution of nanoscale shear bands in a bulk metallic glass. Appl. Phys. Lett. 86, 141904, 2005.
150. Dalla Torre, F.H. et al., Negative strain rate sensitivity in bulk metallic glass and its similarities with the dynamic strain aging effect during deformation. Appl. Phys. Lett. 89, 091918, 2006.
151. 24bulk metallic glass. Mater. Trans., JIM42, 642, 2001.
152. Bowman, K., Mechanical Behaviour of Materials, John Wiley &Sons, Inc., Hoboken, USA, 2004.
153. Lewandowski, J.J., Wang, W.H. and Greer, A.L., Intrinsic plasticity or brittleness of metallic glasses. Phil. Mag. Lett. 85, 77, 2005.
154. Lewandowski, J.J., Shazly, M., and Nouri, A.S., Intrinsic and extrinsic toughening of metallic glasses. Scripta Mater. 54, 337, 2006.
155. Callister, W.D., Materials Science and Engineering: An Introduction. John Wiley &Sons, Inc., New York, 1994, p. 194.
156. Cockeram, B.V., The fracture toughness and toughening mechanisms of nickel-base wear materials. Metall. Mater. Trans. A33, 33, 2002.
157. Wang, R.J. et al., Responses of glassy structure and properties to pressure and devitrification. Appl. Phys. Lett. 83, 2814, 2003.
158. Xi, X.K. et al., Fracture of brittle metallic glasses: Brittleness or plasticity. Phys. Rev. Lett. 94, 125-510, 2005.
159. 10 bulk metallic glass. Scripta Mater. 51, 151, 2004.
160. 5 metallic glass. Mater. Sci. Eng. A 304, 338, 2001.
161. Wang, W.H., Dong, C., and Shek, C.H., Bulk metallic glasses. Mater. Sci. Eng. R44, 45, 2004.
162. Lowhaphandu, P. and Lewandowski, J.J., Fracture toughness and notched toughness of bulk amorphous alloy: Zr-Ti-Ni-Cu-Be. Scripta Mater. 38,1881,1998.
163. Gilbert, C.J., Schroeder, V., and Ritchie, R.O., Mechanisms for fracture and fatigue-crack propagation in a bulk metallic glass. Metal. Mater. Trans. A. 30,1739, 1999.
164. Flores, K.M., Johnson, W.L., and Dauskardt, R.H., Fracture and fatigue behavior of a Zr-Ti-Nb ductile phase reinforced bulk metallic glass matrix composite. Scripta Mater. 49,1181, 2003.
165. Wetzig, K. et al., The relaxation behavior of strength and fracture-toughness of amorphous metal-metalloid alloys. Cryst. Res. Technol. 18, 1181, 1983.
166. Davis, L.A., Fracture of Ni-Fe based metallic glasses. J. Mater. Sci. 10, 1557,1975.
167. Schroers, J. and Johnson, W.L., Ductile bulk metallic glass. Phys. Rev. Lett. 93, 255-506, 2004.
168. Nagendra, N. et al., Effect of crystallinity on the impact toughness of a La-based bulk metallic glass. Acta Mater. 48, 2603, 2000.
169. Pugh, S.F., Relations between the elastic moduli and the plastic properties of polycrystalline pure metals. Phil. Mag. 45, 823, 1954.
170. Kelly, A., Tyson, W.R., and Cottrell, A.H., Ductile and brittle crystals. Phil. Mag. 15, 567, 1967.
171. Rice, J.R. and Thomson, R., Ductile versus brittle behavior of crystals. Phil. Mag. 29, 73,1974.
172. 2/3 temperature dependence. Phys. Rev. Lett. 95,195-501, 2005.
173. Van den Beukel, A. and Radelaar, S., On the kinetics of structural relaxation in metallic glasses. Acta Metall. 31, 419,1983.
174. Van den Beukel, A., Analysis of structural relaxation data in metallic glasses in terms of different models. Acta Metal. Mater. 39, 2709, 1991.
175. 3oP2o. Appl. Phys. Lett. 73, 3665, 1998.
176. 20 metallic glass. Appl. Phys. Lett. 77, 1114, 2000.
177. Wang, G. et al., Tensile fracture characteristics and deformation of a Zr-based bulk metallic glass at high temperatures. Intermetallics13, 642, 2005.
178. Hays, C.C., Kim, C.P., and Johnson, W.L., Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions. Phys. Rev. Lett. 84, 2901, 2000.
179. Lee, M.L., Li, Y., and Schuh, C.A., Effect of a controlled volume fraction of dendritic phases on tensile and compressive ductility in La-based metallic glass matrix composites. Acta Mater. 52, 4121,2004.
180. Kühn, U. et al., ZrNbCuNiAl bulk metallic glass matrix composites containing dendritic bcc phase precipitates. Appl. Phys. Lett. 80, 2478, 2002.
181. He, G. et al., Novel Ti-base nanostructure-dendrite composite with enhanced plasticity. Nature Mater. 2, 33, 2003.
182. Xu, Y. et al., Mg-based bulk metallic glass composites with plasticity and gigapascal strength. Acta Mater. 53, 1857, 2005.
183. Das, J. et al., Work-hardenable ductile bulk metallic glass. Phys. Rev. Lett. 94, 205-501, 2005.
184. Choi-Yim, H. and Johnson, W.L., Bulk metallic glass matrix composites. Appl. Phys. Lett. 71, 3808,1997.
185. 6 bulk metallic glass composites. Acta Mater. 47, 2455, 1999.
186. Siegrist, M.E. and Löffler, J.F., Bulk metallic glass-graphite composites. Scripta Mater. (submitted).
187. Schroers, J., Veazey, C., and Johnson, W.L., Amorphous metallic foam. Appl. Phys. Lett. 82, 370, 2003.
188. Wada, T., Greer, A.L., and Inoue, A., Enhancement of room-temperature plasticity in a bulk metallic glass by finely dispersed porosity. Appl. Phys. Lett. 86, 251907, 2005.
189. Brothers, A.H. and Dunand, D.C., Plasticity and damage in cellular amorphous metals. Acta Mater. 53, 4427, 2005.
190. Ashby, M.F. et al., Metal Foams: A Design Guide. Butterworth Heinemann, Woburn, 2000.
191. Brothers, A.H. and Dunand, D.C., Processing and structure of open-celled amorphous metal foams. Scripta Mater. 52, 335, 2005.
192. Kündig, A.A. et al., In situ formed two-phase metallic glass with surface fractal microstructure. Acta Mater. 52, 2441, 2004.
193. Park, B.J. et al., In situ formation of two amorphous phases by liquid phase separation in Y-Ti-Al-Co alloy. Appl. Phys. Lett. 85, 6353, 2004.
194. Mattern, N. et al., Microstructure and thermal behavior of two-phase amorphous Ni-Nb-Y alloy. Scripta Mater. 53, 271, 2005.
195. 7 bulk metallic glass, Scripta Mater. 53, 165, 2005.
196. www.metglas.com (Metglas®Magnetic Materials).
197. Andersen III, P.M., Bretts, G.R., and Kearney, J.E., Surveillance system having magnetomechanical marker. U.S. Patent 4,510,489, 1985.
198. Mastrogiacomo, G., Kradolfer, J., and Löffler, J.F., Development of magnetic Fe-based metallic glasses without metalloids. J. Appl. Phys., 99, 023-908, 2006.
199. http://www.liquidmetal.com (Liquidmetal®Technologies).
200. www.ocrwm.doe.gov/osti/pdf/43757.pdf (Advanced Technologies, FY2004 Project: Highperformance corrosion-resistant coatings, U.S. Department of Energy, Office of civilian radioactive waste management).
201. 19 in “supercritical” carbon dioxide. Appl. Catal. A223,173, 2002.
202. Ma, C., Nishiyama, N., and Inoue, A., Fabrication and characterization of Coriolis mass flowmeter made from Ti-based glassy tubes. Mater. Sci. Eng. A407, 201, 2005.
203. Inoue, A., Bulk glassy and nonequilibrium crystalline alloys by stabilization of supercooled liquid: fabrication, functional properties and applications (Part 2). Proc. Jpn. Acad. Ser. B81, 172, 2005.
204. Ishida, M. et al., Fillability and imprintability of high-strength Ni-based bulk metallic glass prepared by the precision die-casting technique. Mater. Trans., JIM44,1239, 2004.
205. Sharma, P. et al., Nanoscale patterning of Zr-Al-Cu-Ni metallic glass thin films deposited by magnetron sputtering. J. Nanosci. Nanotechnol. 5, 416, 2005.
206. Jin, K. and Löffler, J.F., Bulk metallic glass formation in Zr-Cu-Fe-Al alloys. Appl. Phys. Lett. 86, 241909, 2005.
207. Buzzi, S. et al., Cytotoxicity of Zr-based bulk metallic glasses. Intermetallics14, 729, 2006.