FRP anchors: Recent advances in research and understanding

APFIS 2009 - Asia-Pacific Conference on FRP in Structures

Volumn , Issue , 2009, Pages 35-44

  Smith, S T ^a  

^a UNIVERSITY OF HONG KONG   (Hong Kong)

Author keywords

Anchors; Bond; FRP; IC debonding; Joints; Pullout; Shear

Indexed keywords

ANCHORAGES (FOUNDATIONS); ANCHORS; BONDING; DEBONDING; FIBER REINFORCED PLASTICS; JOINTS (STRUCTURAL COMPONENTS); SHEARING;

ANCHORAGE SYSTEMS; EXTERNALLY BONDED; FIBRE REINFORCED POLYMER COMPOSITE (FRP); FRP STRENGTHENING; IC DEBONDING; PULLOUT; RELIABILITY AND SAFETIES; STRUCTURAL ELEMENTS;

REINFORCED CONCRETE;

EID: 85054459342     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (26)

1. ACI (2007). Report on Fiber-Reinforced Polymer (FRP) Reinforcement for Concrete Structures, ACI 440R-07, American Concrete Institute (ACI), Farmington Hills, MI, USA.
2. Aiello, M.A., De Lorenzis, L., Galati, N. and La Tegola, A. (2004). “Bond between FRP laminates and curved concrete substrates with anchoring composite spikes”, Proceedings, Innovative Materials and Technologies for Construction and Restoration, IMTCR 2004, Lecce, Italy, 6-9 June.
3. Ceroni, F., Pecce, M., Matthys, S. and Taerwe, L. (2008). “Debonding strength and anchorage devices for reinforced concrete elements strengthened with FRP sheets”, Composites: Part B, 39(3), 429-441.
4. Cook, R.A., Kunz, J., Fuchs W. and Konz, R.C (1998). “Behavior and design of single adhesive anchors under tensile load in uncracked concrete”, ACI Structural Journal, 95(1), 9-26.
5. Eligehausen, R., Mallee, R. and Silva, J.F. (2006). Anchorage in Conc. Construction, Ernst & Young, Germany.
6. Hollaway, L.C. and Teng, J.G. (2008). Strengthening and Rehabilitation of Civil Infrastructures using Fibre-Reinforced Polymer (FRP) Composites, Woodhead Publishing Limited, Cambridge, UK.
7. Kim, S.J. (2008) Strengthening of Reinforced Concrete Slabs with Penetrations using Unanchored and Anchored Fibre-Reinforced Polymer (FRP) Composites, Doctor of Philosophy Dissertation, School of Civil and Environmental Engineering, University of Technology Sydney, Australia, under examination.
8. Kim, S.J. and Smith, S.T. (2009a). “Behaviour of handmade FRP anchors under tensile load in uncracked concrete”, Advances in Structural Engineering, APFIS-09 Special Issue, to appear December 2009.
9. Kim, S.J. and Smith, S.T. (2009b). “Shear strength and behaviour of FRP spike anchors in cracked concrete”, Proceedings (CD Rom), Ninth International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, FRPRCS-9, Sydney, Australia, 13-15 July 2009.
10. Kim, S.J. and Smith, S.T. (2009c).”Pullout strength models for FRP anchors in uncracked concrete”, under review.
11. Lam, L. and Teng, J.G. (2001). “Strength of RC cantilever slabs bonded with GFRP strips”, Journal of Composites for Construction, ASCE, 5(4), 221-227.
12. Mohamed, I., Seracino, R. and Smith, S.T. (2009). “Analysis of FRP-to-concrete joint assemblies with FRP spike anchors using the applied element method”, Proceedings, Second Asia-Pacific Conference on FRP in Structures, APFIS 2009, Seoul, Korea, 9-11 December.
13. Oehlers, D.J. and Seracino, R. (2004). Design of FRP and Steel Plated RC Structures. Retrofitting Beams and Slabs for Strength, Stiffness and Ductility, Elsevier, UK.
14. Oh, H.-S. and Sim, J. (2004). “Interface debonding failure in beams strengthened with externally bonded GFRP”, Composite Interfaces, 11(1), 25-42.
15. Orton, S.L., Jirsa, J.O. and Bayrak O. (2008). “Design considerations of carbon fibre anchors”, Journal of Composites for Construction, ASCE, 12(6), 608-616.
16. Özdemir, G. (2005) Mechanical Properties of CFRP Anchorage, Master of Science Thesis, Middle East Technical University, Turkey.
17. Ozbakkaloglu, T. and Saatcioglu, M. (2009). “Tensile behaviour of FRP anchors in concrete”, Journal of Composites for Construction, ASCE, 13(2), 82-92.
18. Pham, L. Jirsa, J.O. and Bayrak O. (2009). “Development of methods for quality control of CFRP anchors”, Proceedings (CD Rom), Ninth International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, FRPRCS-9, Sydney, Australia, 13-15 July 2009.
19. Smith, S.T. and Teng, J.G. (2002). “FRP-strengthened RC structures. I: Review of debonding strength models”, Engineering Structures, 24(4), 385-395.
20. Smith, S.T. and Kim, S.J. (2008). “Shear strength and behaviour of FRP spike anchors in FRP-to-concrete joint assemblies”, Proceedings (CD ROM), Fifth International Conference on Advanced Composite Materials in Bridges and Structures, ACMBS-V, Winnipeg, Canada, 22-24 September.
21. Smith, S.T. and Kim, S.J. (2009). “Calculation of deflection of FRP-strengthened RC slabs using a tri-linear moment-curvature relationship”, Proceedings, Advanced Composites in Construction Conference, ACIC 2009, Edinburgh, UK, 1-3 September, 239-249.
22. Seliem, H.M., Sumner, E.A., Seracino, R. and Smith, S.T. (2008). “Field testing of RC slabs with openings strengthened with CFRP”, Proceedings (CD Rom), Fourth International Conference on FRP Composites in Civil Engineering, CICE 2008, Zürich, Switzerland, 22-24 July.
23. Tan, K.H. and Patoary, M.K.H. (2004). “Strengthening of masonry walls against out-of-plane load using fiber-reinforced polymer reinforcement”, Journal of Composites for Construction, ASCE, 8(1), 79-87.
24. Teng, J.G., Smith, S.T., Yao, J. and Chen, J.F. (2003). “Intermediate crack induced debonding in RC beams and slabs”, Construction and Building Materials, 17(6-7), 447-462.
25. Teng, J.G., Yuan, H. and Chen, J.F. (2006). “FRP-to-concrete interfaces between two adjacent cracks: Theoretical model for debonding failure”, International Journal of Solids and Structures, 43, 5750-5778.
26. Yuan, H., Teng, J.G., Seracino, R., Wu, Z.S. and Yao, J. (2004). “Full-range behaviour of FRP-to-concrete bonded joints”, Engineering Structures, 26(5), 553-565.