Behaviour of handmade FRP anchors under tensile load in uncracked concrete

Advances in Structural Engineering

Volumn 12, Issue 6, 2009, Pages 845-865

  Kim, S J ^a,b   Smith, S T ^b  

^a UNIVERSITY OF TECHNOLOGY SYDNEY   (Australia)

^b UNIVERSITY OF HONG KONG   (Hong Kong)

Author keywords

Anchors; Concrete; Database; Debonding; FRP; Pullout

Indexed keywords

BOND STRENGTH; CONCRETE STRENGTH; CONSTRUCTION PROCEDURES; DATABASE; EMBEDMENT DEPTH; EXTERNALLY BONDED; FAILURE LOAD; FAILURE MECHANISM; FIBRE CONTENT; FIBRE REINFORCED POLYMERS; FRP STRENGTHENING; HOLE DIAMETER; LOAD DISPLACEMENTS; PULL-OUT TEST; PULLOUT LOADS; STRAIN RESPONSE; TENSILE LOADS; TEST DATA;

ANCHORS; CARBON FIBER REINFORCED PLASTICS; CONCRETE BLOCKS; DEBONDING; FIBER REINFORCED PLASTICS; REINFORCED PLASTICS;

TENSILE STRENGTH;

EID: 77049116322     PISSN: 13694332     EISSN: None     Source Type: Journal    
DOI: 10.1260/136943309790327716     Document Type: Conference Paper

References (29)

1. Adhikary, B.B., Mutsuyoshi, H. and Ashraf, M. (2004). "Shear strengthening of reinforced concrete beams using fiber-reinforced polymer sheets with bonded anchorage", ACI Structural Journal, Vol. 101, No. 5, pp. 660-668.
2. ACI (2004). Guide Test Methods for Fiber-Reinforced Polymers (FRPs) for Reinforcing or Strengthening Concrete Structures, ACI 440.3R-04, American Concrete Institute (ACI), Farmington Hills, MI, USA.
3. ACI (2007). Report on Fiber-Reinforced Polymer (FRP) Reinforcement for Concrete Structures, ACI 440R-07, American Concrete Institute (ACI), Farmington Hills, MI, USA.
4. AS 1012. Methods of Testing Concrete, Standards Australia, Sydney, Australia.
5. ASTM (2000). Standard Test Method for Tensile Properties of Polymer Matrix Composites Materials, ASTM D3039/D3039M, American Society for Testing and Materials (ASTM), Pennsylvania, USA.
6. ASTM (2003). Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements, ASTM E488, American Society for Testing and Materials (ASTM), Pennsylvania, USA.
7. Bank, L.C. (2006). Composites in Construction: Structural Design with FRP Materials, John Wiley & Sons, Hoboken, NJ, USA.
8. Burr, A.C. (2004). "Recent developments in the use of FRP anchors and masonry wall strengthening techniques", The Structural Engineer, Vol. 21, September, pp. 20-21.
9. Cook, R.A., Kunz, J., Fuchs, W. and Konz, R.C. (1998). "Behavior and design of single adhesive anchors under tensile load in uncracked concrete", ACI Structural Journal, Vol. 95, No. 1, pp. 9-26.
10. Eligehausen, R., Mallee, R. and Silva, J.F. (2006). Anchorage in Concrete Construction, Ernst & Young, Germany.
11. Eshwar, N., Ibell, T.J. and Nanni, A. (2005). "Effectiveness of CFRP strengthening on curved soffit RC beams", Advances in Structural Engineering, Vol. 8, No. 1, pp. 55-68.
12. fib (2000). Bond of Reinforcement in Concrete, Bulletin No. 10, Task Group on Bond Models, International Federation for Structural Concrete (fib), Lausanne, Switzerland.
13. Galati, D., Rizzo, A. and Micelli, F. (2007). "Comparison of reinforced concrete beams strengthened with FRP pre-cured laminate systems and tested under flexural loading", Proceedings (CD-ROM) of the Eighth International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, FRPRCS-8, Patras, Greece, 16-18 July 2007.
14. Gose, S.C. and Nanni, A. (2000). Anchorage System for Externally Bonded FRP Laminates using Near Surface Mounted Rods, Report, Centre for Infrastructure Engineering Studies, Draft 2, University of Missouri-Rolla, USA.
15. Hatiem, H.M., Sumner, E.A., Seracino, R. and Smith, S.T. (2008). "Field testing of RC slabs with openings strengthened using CFRP", Proceedings (CD-ROM) of the Fourth International Conference on FRP Composites in Civil Engineering, CICE 2008, Zurich, Switzerland, 22-24 July 2008.
16. Hollaway, L.C. and Teng, J.G. (2008). Strengthening and Rehabilitation of Civil Infrastructures using Fibre-Reinforced Polymer (FRP) Composites, Woodhead Publishing Limited, Cambridge, UK.
17. Kim, S.J. (2009). Strengthening of RC Slabs with Penetrations using Unanchored and Anchored FRP Composites, Doctor of Philosophy Dissertation, Faculty of Engineering and Information Technology, University of Technology Sydney, Australia, under examination.
18. Lam, L. and Teng, J.G. (2001). "Strength of RC cantilever slabs bonded with GFRP strips", Journal of Composites for Construction, ASCE, Vol. 5, No. 4, pp. 221-227.
19. Oh, H.-S. and Sim, J. (2004). "Interface debonding failure in beams strengthened with externally bonded GFRP", Composite Interface, Vol. 11, pp. 25-12.
20. Orton, S.L., Jirsa, J.O. and Bayravk, O. (2008). "Design consideration of carbon fiber anchors", Journal of Composites for Construction, ASCE, Vol. 12, No. 6, pp. 608-616.
21. Ozbakkaloglu, T. and Saatcioglu, M. (2009). "Tensile behaviour of FRP anchors in concrete", Journal of Composites for Construction, ASCE, Vol. 13, No. 2, pp. 82-92.
22. Özdemir, G. (2005). Mechanical Properties of CFRP Anchorage, Master of Science Dissertation, Middle East Technical University, Turkey.
23. Piyong, Y., Silvia, P.F. and Nanni, A. (2003). "Flexural strengthening of concrete slabs by a three-stage prestressing FRP system enhanced with the presence of GFRP anchor spikes", Proceedings of the Composites in Construction International Conference, CCC 2003, Rende, Italy, 16-19 September, pp. 239-244.
24. Shahrooz, B.M., Boy, S. and Baseheart, T.M. (2002). "Flexural strengthening of four 76-years-old T-beam with various fiber- reinforced polymer system: Testing and analysis", ACI Structural Journal, Vol. 99, No. 5, pp. 681-691.
25. Sharif, A., Al-Sulaimani, G., Basunbul, I.A., Baluch, M.H. and Ghaleb, B.N. (1994). "Strengthening of initially loaded reinforced concrete beams using FRP plates", ACI Structural Journal, Vol. 91, No. 2, pp. 160-168.
26. Smith, S.T., and Teng, J.G. (2003). "Shear-bending interaction in debonding failures of FRP-plated RC beams", Advances in Structural Engineering, Vol. 6, No. 3, pp. 183-199.
27. Tan, K.H. and Patoary, M.K.H. (2004). "Strengthening of masonry walls against out-of-plane load using fiber-reinforced polymer reinforcement", Journal of Composites. for Construction, ASCE, Vol. 8, No. 1, pp. 79-87.
28. Teng, J.G., Chen, J.F., Smith, S.T. and Lam, L. (2002). FRP-strengthened RC Structures, John Wiley and Sons, Chichester, West Sussex, UK.
29. Teng, J.G., Smith, S.T., Yao, J. and Chen, J.F. (2003). "Intermediate crack induced debonding in RC beams and slabs", Construction and Building Materials, Vol. 17, No. 6-7, pp. 447-462.