Cold Spray Technology

Cold Spray Technology

Volumn , Issue , 2006, Pages 1-328

  Papyrin, Anatolii ^a   Kosarev, Vladimir ^a   Klinkov, Sergey ^a   Alkimov, Anatolii ^a   Fomin, Vasily ^a  

^a KHRISTIANOVICH INSTITUTE OF THEORETICAL AND APPLIED MECHANICS   (Russian Federation)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85049161733     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-08-045155-8.X5000-5     Document Type: Book

References (335)

1. A.P. Alkhimov, V.F. Kosarev and A.N. Papyrin (1990) Dokl. Akad. Nauk SSSR Vol. 315 1062-1065.
2. A.G. Saltanov (1972) Supersonic Two-Phase Flows. Minsk: Vysshaya Shkola [in Russian]
3. J.H. Spurk and N. Gerber (1972) AIAA J. Vol. 10(No. 6), 755-761.
4. R.F. Probstein and F. Fassio (1971) AIAA J. Vol. 9(No. 4), 772-779.
5. J.D. Waldman and W.J. Reinecke (1971) AIAA J. Vol. 9(No. 6), 60-67.
6. W.A. Laitone (1979) J. Aircraft Vol. 16(No. 12), 809-814.
7. S.K. Matveev and L.P. Seyukova (1981) Calculation of a gas-suspension flow around a disk and a flat end face of a cylinder. Gas Dynamics and Heat Transfer Leningrad: Viscous and Inviscid Gas Flows, Izd. Leningr. Gos. Univ. 3-12. No. 6
8. A.P. Trunev and V.M. Fomin (1984) J. Appl. Mech. Tech. Phys. Vol. 25(No. 4), 583-590.
9. A.P. Trunev and V.M. Fomin (1984) J. Appl. Mech. Tech. Phys. Vol. 25(No. 5), 732-734.
10. B.A. Balanin and V.V. Zlobin (1979) Mekh. Zhidk. Gaza (No. 3), 159-162.
11. A.J. Laderman, C.H. Lewis and S.R. Byron (1970) AIAA J. Vol. 8(No. 10), 1831-1839.
12. D.T. Hove and A.A. Smit (1975) AIAA J. Vol. 13(No. 7), 947-948.
13. L.E. Dunbar, J.F. Courtney and L.D. Memillen (1975) AIAA J. Vol. 13(No. 7), 908-912.
14. A.P. Alkhimov, N.N. Yanenko, N.I. Nesterovich, A.N. Papyrin and V.M. Fomin (1981) Dokl. Akad. Nauk SSSR Vol. 260(No. 4), 821-825.
15. A.P. Alkhimov, V.F. Kosarev, N.I. Nesterovich and A.N. Papyrin (1986) Method of a Drag Reduction of a blunt-nosed body. Patent of Russian Federation No. 1228579 [in Russian]
16. S.S. Bartenev, Y.P. Fedleo and A.I. Grigirov (1982) Detonation coatings in machine building. [in Russian], Mashinostroenie, Leningrad branch
17. C. Preece (Ed.) (1979) Erosion New York: Academic Press
18. V.V. Kudinov, P.Y. Pekshev P.Yu., V.E. Belashchenko, O.P. Solonenko and V.A. Safiulin (1990) Plasma-Induced Application of Coatings. 408 Moscow: Nauka [in Russian]
19. A.P. Alkhimov, S.V. Klinkov, V.F. Kosarev and A.N. Papyrin (1997) J. Appl. Mech. Tech. Phys. Vol. 38(No. 2), 324-330.
20. A.P. Alkhimov, V.M. Boiko and A.N. Papyrin (1982) Avtometriya (No. 3), 38-45.
21. A.P. Alkhimov and V.F. Kosarev (1996) Laser diagnostics of supersonic two-phase jets. 8th Intern. Conf. on the Methods of Aerophysical Research, Sept. 1996, Proceedings 3-8. Part 2, Novosibirsk
22. A.P. Alkhimov, V.A. Arbuzov, A.N. Papyrin, R.I. Soloukhin and M.S. Stein (1973) Comb. Expl. Shock Waves (No. 4), 507-514.
23. A.P. Alkhimov, A.N. Papyrin, A.L. Predein and R.I. Soloukhin (1977) J. Appl. Mech. Tech. Phys. Vol. 18(No. 4), 496-502.
24. A.P. Alkhimov, V.F. Kosarev and A.N. Papyrin (1998) J. Appl. Mech. Tech. Phys. Vol. 39(No. 2), 318-324.
25. A.N. Papyrin, V.F. Kosarev, S.V. Klinkov and A.P. Alkhimov (2002) On the interaction of high speed particles with a substrate under the Cold Spraying, Intern. Thermal Spray Conf. 2002 (ITSC 2002) Essen, Germany 380-384. Proceedings
26. A.P. Alkhimov, S.V. Klinkov and V.F. Kosarev (2000) J. Appl. Mech. Tech. Phys. Vol. 41(No. 2), 245-250.
27. F.F. Vitman and N.A. Zlatin (1963) Zh. Tekh. Fiz. (No. 8), 982-989.
28. L.V. Belyakov, F.F. Vitman and N.A. Zlatin (1963) Zh. Tekh. Fiz. (No. 8), 990-995.
29. N.A. Zlatin, A.P. Krasil'shchikov, G.I. Mishin and N.N. Popov (1974) Ballistic Facilities and their Application in Experimental Research. 344 pp Moscow: Nauka in Russian
30. D.J. Gardner, J.A.M. McDonnell and I. Collier (1997) IJIE Vol. 19(No. 7), 589-602.
31. J.A.M. McDonnell (1999) IJIE Vol. 23 597-619.
32. A.P. Alkhimov, V.F. Kosarev, A.N. Papyrin, et al. (1992) New Materials and Technologies. Theory and Practice of Material Hardening in Extreme Processes. 197 pp M.F. Zhukov, V.E. Panin (Eds) Novosibirsk: Nauka in Russian
33. S.V. Klinkov and V.F. Kosarev (2002) Fiz. Mezomekhanika Vol.5(No.3), 27-35.
34. S.V. Klinkov, V.F. Kosarev and A.N. Papyrin (2003) Modeling of particle-substrate adhesive interaction under the Cold Spray process, Int. Thermal Spray Conf., Thermal Spray 2003. C. Moreau, B. Marple (Eds) Proceedings, Advancing the Science and Applying the Technology Materials Park, OH, USA: ASM International 27-35.
35. G.A. Korn and T.M. Korn (1968) Mathematical Handbook for Scientists and Engineers New York, San Francisco, Toronto, Sydney: McGraw Hill Book Company
36. A.P. Alkhimov, V.F. Kosarev and A.N. Papyrin (1990) Dokl. Akad. Nauk SSSR Vol. 315 1062-1065.
37. V.M. Fomin, A.I. Gulidov, G.A. Sapozhnikov, et al. (1999) High-Velocity Interaction of Bodies. 600 pp Novosibirsk: Izd. Sib. Branch Ross. Akad. Nauk in Russian
38. A.I. Gulidov, V.M. Fomin and R.V. Fursenko (1999) Contact time in the impact of a spherical particle with a solid substrate. XVI Conf. on Numerical Methods for Solving the Problems of the Theory of Elasticity and Plasticity [in Russian], Proceedings Novosibirsk 66-70.
39. A.I. Gulidov, V.M. Fomin and A.V. Seryakov (2001) Numerical simulation of microparticle-substrate impacts. XVII Conf. on Numerical Methods for Solving the Problems of the Theory of Elasticity and Plasticity [in Russian], Proceedings Novosibirsk 65-69.
40. M.L. Wilkins (1964) Calculation of elastoplastic flows. B. Alder, S. Fernbach, M. Retenberg (Eds) Methods of Computational Physics New York: Academic Press
41. M.L. Wilkins (1999) Computer Simulation of Dynamic Phenomena. Springer 246 pp
42. N.A. Kil'chevskii (1969) Theory of Impacts of Solids [in Russian]. Kiev: Naukova Dumka 247 pp
43. A.I. Gulidov and V.M. Fomin (1980) Prikl. Mekh. Tekh. Fiz. Vol. 21(No. 3), 126-132.
44. V.M. Boiko, A.I. Gulidov, A.N. Papyrin, et al. (1982) J. Appl. Mech. Tech. Phys. Vol. 23(No. 5), 129-133.
45. A.P. Alkhimov, A.I. Gulidov, V.F. Kosarev and N.I. Nesterovich (2000) J. Appl. Mech. Tech. Phys. Vol. 41(No. 1), 188-192.
46. H. Schlichting (1955) Boundary Layer Theory. New York: McGraw-Hill
47. A.P. Alkhimov, V.P. Gulyaev, A.F. Demchuk, V.F. Kosarev, V.P. Larionov and V.P. Spesivtsev (1997) Setup for coating deposition onto the inner surface of a tube. Bull. Izobr. (No. 8), 184-185. Russian Patent No. 2075535
48. A.P. Alkhimov, A.F. Demchuk, V.F. Kosarev and V.E. Kozhevnikov (1997) Electrotechnical connector. Part 2 Bull. Izobr. (No. 32), 376. Russian Patent No. 2096877
49. A.P. Alkhimov, A.F. Demchuk, V.F. Kosarev and V.P. Spesivtsev (1998) Setup for deposition onto the inner surface of tubes. V Intern. Conf., Films and Coatings-98 St. Petersburg 117-120. Proceedings
50. A.P. Alkhimov, A.F. Demchuk, V.F. Kosarev and V.V. Lavrushin (1998) Technological processes of application of current-conducting corrosion-resistant coatings. V Intern. Conf., Films and Coatings-98 St. Petersburg 259-263. Proceedings
51. A.P. Alkhimov, V.F. Kosarev and A.N. Papyrin (1999) Spraying the current conducting coatings on electrotechnical unit by Cold Spray method. United Thermal Spray Conf. Dusseldorf 288-290. Proceedings
52. V.V. Kudinov and V.M. Ivanov (1981) Plasma Application of Refractory Coatings. 192 pp. Moscow: Mashinostroenie in Russian
53. M.K. Shorshorov M.Kh. and Y.A. Kharlamov Yu.A. (1978) Physical and Chemical Fundamentals of Detonation Gas Deposition of Coatings. 224 pp Moscow: Nauka in Russian
54. V.V. Kudinov, P.Y. Pekshev P.Yu., V.E. Belashchenko, O.P. Solonenko and V.A Safiulin (1990) Plasma Application of Coatings. 408 pp Moscow: Nauka in Russian
55. V.N. Danchenko, A.A. Milenin and A.N. Golovko (1998) Poroshkovaya Metallurgiya. 10-15 Nos 7/8
56. A.P. Alkhimov, S.V. Klinkov and V.F. Kosarev (2000) Fiz. Mezomekhanika Vol. 3(No. 1), 53-57.
57. A.N. Tikhonov and A.A. Samarskii (1966) Equations of Mathematical Physics. 724 pp Moscow: Nauka in Russian
58. A.I. Zverev, S.Y. Sharivket S.Yu. and E.A. Astakhov (1979) Detonation Deposition of Coatings. Leningrad: Sudostroenie in Russian
59. M.K. Shorshorov M.Kh. and Y.A. Kharlamov Yu.A. (1978) Physical and Chemical Fundamentals of Detonation Gas Deposition of Coatings. 224 pp Moscow: Nauka in Russian
60. K.A. Osipov (1962) Some Activated Processes in Metals and Alloys. Moscow: Izd. Akad. Nauk SSSR 123 pp
61. C.A. Wert Charles A. and R.M. Thomson Robb M. (1964) Physics of Solids. New York, San Francisco, Toronto, London: McGraw-Hill Book Company
62. K.L. Johnson (1985) Contact Mechanics. Cambridge: Cambridge University Press
63. A.I. Celikov, A.D. Tomlenov, V.I. Zyuzin, et al. (1982) Theory of rolling. 355 pp Metallurgy 355 pp in Russian
64. A.P. Alkhimov, S.V. Klinkov and V.F. Kosarev (2001) J. Thermal Spray Technol. Vol. 10(No. 2), 375-381.
65. S.V. Klinkov and V.F. Kosarev (2003) Fiz. Mezomekhanika Vol. 6(No. 3), 85-90.
66. I.F. Golovnev, E.I. Golovneva and V.M. Fomin (1997) Dokl. Akad. Nauk SSSR Vol. 356(No. 4), 466-469.
67. I.F. Golovnev, E.I. Golovneva, A.A. Konev and V.M. Fomin (1998) Fiz. Mezomekhanika Vol. 1(No. 2), 21-33.
68. R.A. Johnson (1989) Phys. Rev. B Vol. 39 12554-12559.
69. A.V. Bolesta, I.F. Golovnev and V.M. Fomin (2000) Fiz. Mezomekhanika Vol. 3(No. 5), 39-46.
70. O.H. Nielsen, J.P. Sethna, P. Stoltze, et al. (1994) Europhys. Lett. Vol. 26 51-56.
71. F. Ercolessi, W. Andreoni and E. Tosatti (1991) Phys. Rev. Lett. Vol. 66 911.
72. M.E. Fisher and A.N. Berker (1982) Phys. Rev. B Vol. 26 2507-2513.
73. A.F. Voter and S.P. Chen (1987) Accurate interatomic potentials for Ni, Al, and Ni3Al. Mat. Res. Soc. Symp., Proceedings 175.
74. M.P. Allen and D.J. Tildesley (1987) Computer Simulation of Liquids. Oxford University Press 385 pp
75. A.V. Bolesta, I.F. Golovnev and V.M. Fomin (2001) Fiz. Mezomekhanika Vol. 4(No. 1), 5-10.
76. A.P. Alkhimov, S.V. Klinkov and V.F. Kosarev (1999) Teplofiz. Aeromekh Vol. 6(No. 1), 51-58.
77. G.I. Abramovich (1969) Applied Gas Dynamics. Moscow: Nauka [in Russian
78. D.R. Bartz. Trans. ASME. Vol. 77, No. 8, pp. 1235-1245.
79. H. Schlichting (1955) Boundary Layer Theory. New York: McGraw-Hill
80. M.E. Deich and A.E. Zaryankin (1970) Gas Dynamics of Diffusers and Exhaust Nozzles of Turbomachinery. Moscow: Energiya in Russian
81. L.G. Loitsyanskii (1970) Fluid Mechanics. Moscow: Nauka in Russian
82. A.P. Alkhimov, S.V. Klinkov, V.F. Kosarev and A.N. Papyrin (1995) Gas-dynamic spraying. Investigation of a plane supersonic two-phase jet. Abstracts Jet and Unsteady Flows in Gas Dynamics 8-9. Novosibirsk
83. A.P. Alkhimov and V.F. Kosarev (1996) Laser diagnostics of supersonic two-phase jets. 8th Intern. Conf. on the Methods of Aerophys. Research Novosibirsk 3-8. Proceedings, Pt 2
84. A.P. Alkhimov, S.V. Klinkov, V.F. Kosarev and A.N. Papyrin (1997) J. Appl. Mech. Tech. Phys. Vol. 38(No. 2), 324-330.
85. A.P. Alkhimov, S.V. Klinkov and V.F. Kosarev (1998) A study of supersonic air jets exhausted from a rectangular nozzle. 9th Intern. Conf. on the Methods of Aerophys. Research Novosibirsk 41-46. Proceedings, Pt 3
86. A.S. Ginevskii (1969) Theory of Turbulent Jets and Wakes. Integral Methods of Calculation Moscow: Mashinostroenie in Russian
87. G.I. Abramovich (1984) Theory of Turbulent Jets. Moscow: Nauka in Russian
88. L.A. Vulis and V.P. Kashkarov (1965) Theory of Viscous Fluid Jets. Moscow: Nauka in Russian
89. V.S. Avduevskii, E.A. Ashratov, A.V. Ivanov and U.G. Pirumov (1985) Supersonic Non- Isobaric Gas Jets. Moscow: Mashinostroenie in Russian
90. A.P. Alkhimov, S.V. Klinkov and V.F. Kosarev (2000) Teplofiz. Aeromekh Vol. 7(No. 2), 255-332.
91. A.N. Papyrin, A.P. Alkhimov, V.F. Kosarev and S.V. Klinkov (2001) Experimental study of interaction of supersonic two-phase jet with a substrate under cold spray. Intern. Thermal Spray Conf. and Exposition “Advancing Thermal Spray in the 21st Century Singapore 423-431. Proceedings
92. I.A. Belov (1983) Interaction of Nonuniform Flows with Targets. Moscow: Mashinostroenie in Russian
93. B.N. Yudaev, M.S. Mikhailov and V.K. Savin (1977) Heat Transfer During Interaction of Jets with Targets. Moscow: Mashinostroenie in Russian
94. A.P. Alkhimov, S.V. Klinkov and V.F. Kosarev (2000) Teplofiz. Aeromekh. Vol. 7(No. 3), 389-396.
95. A.P. Alkhimov, S.V. Klinkov and V.F. Kosarev (2000) Research of heat exchange of a supersonic jet of a rectangular cut with a surface for cold gasdynamic spraying. 10th Intern. Conf. on the Methods of Aerophys. Research Novosibirsk 3-8. Proceedings, Pt 2
96. M.K. Shorshorov M.Kh. and Y.A. Kharlamov Yu.A. (1978) Physical and Chemical Fundamentals of Detonation Gas Deposition of Coatings. Moscow: Nauka in Russian
97. V.V. Kudinov, P.Y. Pekshev P.Yu., V.E. Belashchenko, O.P. Solonenko and V.A. Safiulin (1990) Plasma Application of Coatings. Moscow: Nauka in Russian
98. B.N. Yudaev, M.S. Mikhailov and V.K. Savin (1977) Heat Transfer During Interaction of Jets with Targets. Moscow: Mashinostroenie in Russian
99. I.A. Belov and B.N. Pamadi (1970) IIT-AERO-TN. Bombay Inst. of Technology (No. 3)
100. I.A. Belov, I.G. Ginzburg, V.A. Zazimko and V.S. Terpigor'ev (1969) Effect of turbulence of the jet on its heat exchange with the target. Heat and Mass Transfer Vol. 2 Minsk: ITMO 167-183. in Russian
101. O.I. Gubanova, V.V. Lunev and L.I. Plastinina (1971) Izv. Akad. Nauk SSSR, Mekh. Zhidk. Gaza (No. 2), 135-138.
102. E.P. Volchkov and S.V. Semenov (1994) Fundamentals of the Boundary-Layer Theory. Novosibirsk: ITP SB RAS in Russian
103. G.T. Kalghatgi and B.L. Hunt (1976) Aeronaut. Quarterly Vol. 27 169-185.
104. M.F. Zhukov and O.P. Solonenko (1990) High-Temperature Dusty Jets in Processing of Powder Materials. V.E. Nakoryakov (Ed.) Novosibirsk: ITP SB RAS in Russian
105. A.P. Alkhimov, S.V. Klinkov and V.F. Kosarev (2000) The features of acceleration of particles in supersonic nozzles of a rectangular cut for cold gasdynamic spraying. 10th Intern. Conf. on the Methods of Aerophys. Research Novosibirsk 9-15. Proceedings, Pt 2
106. A.P. Alkhimov, S.V. Klinkov and V.F. Kosarev (2001) J. Thermal Spray Technology Vol. 10(No. 2), 375-381.
107. S.V. Klinkov and V.F. Kosarev (2001) Computer application for design of COLD SPRAY nozzle units. 6th Intern. Conf.Films and Coatings - 2001 St. Petersburg 226-231. Proceedings
108. A.P. Alkhimov, V.F. Kosarev, N.I. Nesterovich, A.N. Papyrin and M.M. Shushpanov (1994) Gas-dynamic spraying method for applying coatings. Official Gazette Vol. 1161(No. 2), United States Patent No. 5,302,414
109. A.P. Alkhimov, V.F. Kosarev, N.I. Nesterovich, A.N. Papyrin and M.M. Shushpanov (1992) Method and device for coating. Europian Patent Bullitin (No. 20), European Patent No. 0 484 533 A1
110. A.P. Alkhimov, V.F. Kosarev and A.N. Papyrin (1991) Prospects of using the COLD SPRAY method for recovery and hardening of parts. Activities in the Field of Recovery and Hardening of Parts, Workshop Proceedings Moscow 3. Pt. II
111. A.P. Alkhimov, A.F. Demchuk, V.F. Kosarev and A.N. Papyrin (1994) Possibility of using the COLD SPRAY method for anticorrosion protection and recovery of parts. Abstracts State and Prospects of Recovery and Hardening of Machine Elements 77-78. Moscow
112. A.P. Alkhimov, A.F. Demchuk, V.F. Kosarev and A.N. Papyrin (1994) Gas-dynamic coatings in power engineering. Regional Workshop New Technologies and Scientific Developments in Power Engineering Novosibirsk 19-22. Abstracts
113. A.P. Alkhimov, V.F. Kosarev and A.N. Papyrin (1995) COLD SPRAY method for creating structurally inhomogeneous materials. 4th Intern. Conf. Computer Design of Promising Materials and Technologies Tomsk 143-144. Abstracts
114. A.P. Alkhimov and V.F. Kosarev (1995) Compaction of new materials by the COLD SPRAY method. Ist Conf. of the Siberian Association of Material Scientists Materials of Siberia Novosibirsk 114-115. Abstracts
115. A.P. Alkhimov, A.F. Demchuk, V.F. Kosarev and V.V. Lavrushin (1998) Deposition of current-conducting coatings preventing electrochemical corrosion. Workshop Automation of Technological Processes on Fuel Engineering, Power Engineering, and Pipeline-Transportation Enterprises in Russia Novosibirsk: Design and Technology Institute of Computational Engineering SB RAS 4. http://www.kti.nsc.ru/seminar1998/index2.htm Internet journal
116. S.P. Kiselev, G.A. Ruev, A.P. Trunev, V.M. Fomin, et al. (1992) Shock-Wave Processes in Two-Component and Two-Phase Media. Novosibirsk: Nauka in Russian
117. A.P. Alkhimov, V.F. Kosarev, N.I. Nesterovich, A.N. Papyrin and M.M. Shushpanov (1994) Gas-dynamic spraying method for applying coatings. Official Gazette Vol. 1161(No. 2), United States Patent No. 5,302,414
118. A.P. Alkhimov, V.F. Kosarev, N.I. Nesterovich, A.N. Papyrin and M.M. Shushpanov (1992) Method and device for coating. European Patent Bulletin (No. 20), European Patent No. 0 484 533 A1
119. A.P. Alkhimov, V.F. Kosarev, N.I. Nesterovich, A.N. Papyrin and M.M. Shushpanov (1997) Gas-dynamic spraying method for applying coating, Reexamination Certificate. 25 Feb Official Gazette United States Patent No. 5,302,414
120. A.P. Alkhimov, V.F. Kosarev, N.I. Nesterovich, A.N. Papyrin and M.M. Shushpanov (1991) Device for coating application. Bull. Izobr. (No. 1), 77. Patent No. 1618777 of the Russian Federation
121. A.P. Alkhimov, V.F. Kosarev and A.N. Papyrin (1993) Device for coating application by spraying, Patent No. 1674585 of the Russian Federation. Bull. Izobr. (No. 18), 195.
122. A.P. Alkhimov, V.F. Kosarev, N.I. Nesterovich and A.N. Papyrin (1991) Method for coating application. Bull. Izobr. (No. 1), 77. Patent No. 1618778 of the Russian Federation
123. A.P. Alkhimov, V.F. Kosarev, N.I. Nesterovich and A.N. Papyrin (1996) Device for coating application. Bull. Izobr. (No. 23), 196. Patent No. 1603581 of the Russian Federation
124. A.P. Alkhimov, V.F. Kosarev, N.I. Nesterovich and A.N. Papyrin (1995) Method for application of metal-powder coatings. Bull. Izobr. (No. 7), 262. Patent No. 1773072 of the Russian Federation
125. A.P. Alkhimov, V.F. Kosarev and A.N. Papyrin (1994) Device for coating application. Bull. Izobr. (No. 7), 32. Patent No. 2010619 of the Russian Federation
126. A.P. Alkhimov, V.P. Gulyaev, A.F. Demchuk, V.F. Kosarev, V.P. Larionov and V.P. Spesivtsev (1997) Setup for coating application onto the inner surface of a pipe. Bull. Izobr. (No. 8), 184-185. Patent No. 2075535 of the Russian Federation
127. A.P. Alkhimov, A.F. Demchuk, V.F. Kosarev and V.E. Kozhevnikov (1997) Electrotechnical connector. Part II Bull. Izobr (No. 32), 376. Patent No. 2096877 of the Russian Federation
128. A.P. Alkhimov, V.F. Kosarev, N.I.V.V. Lavrushin and O.A. Alkhimov (2002) Device for gas-dynamic spraying of powder materials. Part II Bull. Izobr. Pol. Mod. (No. 28), 317. Patent No. 2190695 of the Russian Federation
129. V.F. Kosarev, V.V. Lavrushin, V.P. Spesivtsev, S. Tyanin Sun, U. Tsze and Z. Huanzu Zin (2005) Device for gas-dynamic spraying of powder materials. Bull. Izobr.Pol. Mod. (No. 6), Patent No. 2247174 of the Russian Federation
130. A.V. Lykov (1978) Heat mass exchange. Hand-book. 480 p Moscow: Energy in Russian
131. Physical encyclopedic dictionary Moscow: Soviet encyclopedia
132. G.I. Abramovich (1969) Applied Gas Dynamics. 824 p Moscow: Nauka in Russian
133. V.M. Buznik, A.K. Tsvetnikov, A.P. Alkhimov, V.V. Lavrushin, O.I. Lomovskii and E.Y. Belyaev E.Yu. (2000) Composition for coatings and method for its application. Bull. Izobr. (No. 14), Patent No. 2149218 of the Russian Federation
134. O.I. Lomovskii (2000) Mechanical sintering and mechanochemical synthesis for obtaining metallic micro- and nanoncomposite materials. Physicochemistry of Finely Disperse Systems, Proc. V All-Russia Conf. Moscow 158-159.
135. Y.V. Baikalova Yu.V. and O.I. Lomovsky (2000) J. Alloys Comp. Vol. 297 87-91.
136. F.V. Bolesta, V.M. Fomin, M.R. Sharafutdinov and B.P. Tolochko (2001) Investigation of interface boundary occurring during cold gas-dynamic spraying of metallic particles. Nuclear Instruments and Methods in Physics Research Vol. 470 249-252.
137. R.E. Blose, T.J. Roemer, et al. (2003) Automated Cold Spray System: Description of Equipment and Performance Data. Proceedings of ITSC Orlando, USA 103-111.
138. P. A.N. Papyrin, et al. (1998) A Cold-gas Spray coating process for enhancing titanium. JOM Vol. 50(No. 9), 52-54.
139. J. Karthikeyan, et al. (2000) Cold Spray Processing of Titanium Powder, Thermal Spray: Surface Engineering via Applied Research 255-262.
140. J. Vlcek, H. Huber, H. Voggenreiter, A. Ficher, E. Lugscheider, H. Hallen and G. Pache (2001) Kinetic Powder Compaction Applying the Cold Spray Process. A Study on Parameters. International Thermal Spray Conference Singapore Presented at the
141. W. Kroemmer, P. Heinrich and P. Richter (2003) Cold Spraying - Equipment and Application Trends. Proceedings of ITSC Orlando, USA 97-103.
142. R.G. Maev, E. Strumban, V. Leshchynsky and M. Beneteau (2004) Supersonic Induced Mechanical Alloy Technology and Coatings for Automotive and Aerospace Applications, Cold Spray 2004: An Emerging Spray Coating Technology, 27-28 Sept. 2004 (Akron, Ohio). Proc. ASM International (CD
143. Kashirin, et al. (2002) Apparatus for gas-dynamic coating. US Patent 6,402,050, 11 June
144. J. Villafuerte Julio (2005) Cold Spray: A new technology. Welding Journal Vol. 84(No. 5), 24-29. May
145. http://www.supersonicspray.com/
146. R.G. Maev R.Gr. and V. Leshchynsky (2006) Air Gas Dynamic Spraying of Powder Mixtures: Theory and Application. J. Thermal Spray Technol. Vol. 15(No. 2), 379-391.
147. C. Borchers, F. Gartner, T. Stoltenhoff, H. Assadi, and H. Kreye, Microstructural and macroscopic properties of cold sprayed copper coatings, J. Appl. Phys., Vol. 93, No. 12, pp. 10064-10070.
148. C.-J. Li Chang-Jiu and W.-Y. Li Wen-Ya (2003) Deposition characteristics of titanium coating in cold spraying. Surface and Coating Technology Vol. 167 278-283.
149. R.C. Dykhuizen and M.F. Smith (1998) Gas dynamic principles of cold spray. Journal of Thermal Spray Technology Vol. 7(No. 2), 205-212.
150. K. Sakaki, N. Huruhashi, K. Tamaki and Y. Shimizu (2002) Effect of nozzle geometry on cold spray process. E. Lugssheider (Eds) Tagungsband Conference Proceedings Dusseldorf, Germany: Deutscher Verband Für Schwei_en 385-389.
151. K. Sakaki, Y. Shimizu, Y. Guoda and A. Devasenapathi (1998) Effects of gun nozzle geometry on high velocity oxygen-fuel (HVOF) thermal spraying process. C. Coddet (Eds) Thermal Spray: Meeting the Challenges of 21st Century OH, USA: ASM International, Materials Park 445-450.
152. A.H. Shapiro (1953) The dynamics and thermodynamics of compressible fluid flow. Ronald Press
153. R.H. Sabesky, A.J. Acosta and E.G. Hauptmann (1971) Fluid Flow. Macmillan
154. C.B. Henderson (1976) Drag coefficients of spheres in continuum and rarefied flows. AIAA J. Vol. 14 707-708.
155. R.E. Blose, T.J. Roemer, A.J. Mayer, D.E. Beatty and A.N. Papyrin (2003) Automated cold spray system: Description of equipment and performance data. B.R. Marple, C. Moreau (Eds) Thermal Spray 2003 Advancing the Science and Applying the Technology OH, USA: ASM International, Materials Park 103-111.
156. T. Stoltenhoff, J. Voyer and H. Kreye (2002) Cold spraying — state of the art and applicability. E. Lugssheider (Eds) Tagungsband Conference Proceedings Dusseldorf, Germany: Deutscher Verband Für Schwei_en 366-374.
157. T. Stoltenhoff, H. Kreye, W. Kroemmer and H.J. Richter (2000) Cold spraying - from thermal spraying to high kinetic energy spraying. P. Heinrich (Eds) HVOF Colloquium 2000 Gemeinschaft thermisches Spritzene 29-38.
158. T. Stoltenhoff, H. Kreye, H.J. Richter and H. Assadi (2001) Optimization of the cold spray process. C.C. Berndt, K.A. Khor, E. Lugscheider (Eds) Thermal Spray 2001: New Surfaces For A New Millennium OH: ASM International, Materials Park 409-416.
159. Fluent, Inc. Lebanon NH, USA, 1999.
160. G.B. Wallis (1969) One-dimensional two phase flow. New York, NY: Mc Graw Hill
161. M.J. Walsh (1975) Drag coefficient equation for small particles in high speed flows. AIAA J. Vol. 13 1526-1528.
162. M. Grujicic, C.L. Zhao, C. Tong, W.S. DeRosset and D. Helfritch (2004) Analysis of the impact velocity of powder particles in the cold-gas dynamic-spray process. Materials Science and Engineering A368 222-230.
163. E.H. Kwon, J.W. Han, C.H. Lee and H.J. Kim (2005) Computer simulation of injected particle behavior during cold spray process. E. Lugscheider (Eds) Proc. Thermal spray conference. Thermal spray connects: Explore its surfacing potential! Basel, Swizerland, May 2-4 1345-1348.
164. B. Jodoin, F. Raletz and M. Vardelle (2006) Cold spray modeling and validation using an optical diagnostic method. Surface and Coating Technology Vol. 200 4424-4432. Nos 14-15, 10 April
165. T.-C. Jen T.-Ch., L. Li, W. Cui, Q. Chen Qi. and X. Zhang (2005) Numerical investigations on cold gas dynamic spray process with nano- and microsize particles. Int. J. Heat and Mass Transfer 48 4384-4396.
166. J. Vlcek, H. Huber, H. Voggenreiter, A. Fischer, E. Lugscheider, H. Hallen and G. Pache (2001) Kinetic power compaction applying the cold spray process. A study on parameters. C.C. Berndt, K.A. Khor, E. Lugscheider (Eds) Thermal Spray 2001: New Surfaces For A New Millennium OH: ASM International, Materials Park 417-422.
167. R.C. Dykhuizen and R.A. Neiser (2003) Optimizing the cold spray process. B.R. Marple, C. Moreau (Eds) Thermal Spray 2003: Advancing the Science and Applying the Technology OH, USA: ASM International, Materials Park 19-26.
168. D.L. Gilmore, R.A. Neiser, R.C. Dykhuizen and M.F. Smith (1999) Analysis of the critical velocity for deposition in the cold spray process. Boston, Mass: MRS Fall Meeting
169. D.L. Gilmore, R.C. Dykhuizen, R.A. Neiser, T.J. Roemer and M.F. Smith (1999) Particle velocity and deposition efficiency in the cold spray process. Journal of Thermal Spray Technology Vol. 8 576-582.
170. R.C. Dykhuizen, M.F. Smith, D.L. Gilmore, R.A. Neiser, X. Jiang and S. Sampath (1999) Impact of high velocity cold spray particles. Journal of Thermal Spray Technology Vol. 8(No. 4), 559-564.
171. V. Shukla and G. Elliott (2000) The fluid dynamics of cold gas dynamic spray. Proc. ASM International Materials Solutions Conf. St. Louis, Missouri, USA
172. V. Shukla (2002) Laser diagnostic in cold gas dynamic spray. Albuquerque, New Mexico, USA: ASM Thermal Spray Society, cold spray, New Horizons in Surface Technology
173. A.P. Alkhimov, V.F. Kosarev and S.V. Klinkov (2001) The features of cold spray nozzle design. Journal of Thermal Spray Technology Vol. 10(No. 2), 375-381.
174. F.S. Alvi, J.A. Ladd and W.W. Bower (2002) Experimental and computational investigation of supersonic impinging jets. AIAA J Vol. 40 599-609.
175. A. Krothapalli, E. Rajakuperan, F.S. Alvi and L. Lourenco (1999) Flow field and noise characteristics of a supersonic impinging jet. J. Fluid Mechanics Vol. 393 155-181.
176. A. Powell (1988) The sound producing oscillations of round underexpanded jets impinging on normal plates. J. Acoustical Society of America Vol. 83 515-533.
177. J. Karthikeyan and C.M. Kay (2003) cold spray technology: An industrial perspective. B.R. Marple, C. Moreau (Eds) Thermal Spray 2003: Advancing the Science and Applying the Technology Materials Park, OH, USA: ASM International 117-121.
178. B. Jodoin (2001) Effects of shock waves on impact velocity of cold spray particles. C.C. Berndt, K.A. Khor, E. Lugscheider (Eds) Thermal Spray 2001: New Surfaces For A New Millennium Materials Park, OH: ASM International 399-407.
179. B.^Jodoin, P.^Proulx and Y.^Mercadier. Numerical study of supersonic direct current plasma nozzle flow. AIAA J., Vol. 36, No. 4, pp. 578-584.
180. V. Shukla, G.S. Elliot and B.H. Kear (2000) Nanopowder deposition by supersonic rectangular jet impingement. Journal of Thermal Spray Technology Vol. 9(No. 3), 394-398.
181. J. Wu, H. Fang, S. Yoon, H.J. Kim and C. Lee Ch. (2005) Measurement of particle velocity and characterization of deposition in aluminum alloy kinetic spraying process. Applied Surface Science Vol. 252(No. 5), 1368-1377. Dec.
182. T.V. Steenkiste T. Van and J.R. Smith (2003) Evaluation of coating produced via kinetic and cold spray processes. B.R. Marple, C. Moreau (Eds) Thermal Spray 2003: Advancing the Science and Applying the Technology Materials Park, OH, USA: ASM International 53-61.
183. J. Mondoux, B. Jodoin, L. Ajdelsztain, J.M. Schoenung and G.E. Kim (2004) Nanostructured aluminum coatings produced using cold spraying technology. Thermal Spray Solutions. Advances in Technology and Application Dusseldorf/Germany: Verband Für Schwei_en and verwandte Verfahren DVS-Verlag GmbH
184. B. Jodoin, F. Raletz and M. Vardelle (2005) Cold spray flow modeling and validation. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 165-169.
185. F. Gartner, T. Stoltenhoff, T. Schmidt and H. Kreye (2005) The Cold spray process and its potential for industrial applications. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 158-164.
186. F. Raletz, M. Vardelle and G. Ezo'o (2005) Fast determination of particle critical velocity in cold spraying. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 684-692.
187. J. Vlcek, L. Gimeno, H. Huber and E. Lugscheider (2003) A systematic approach to material eligibility for the cold spray process. B.R. Marple, C. Moreau (Eds) Thermal Spray 2003: Advancing the Science and Applying the Technology Materials Park, OH, USA: ASM International 37-44.
188. H. Dell and G. Oberhofer (2000) Simulation zur Deformation eines spharischen Pulverpartikels beim Kaltkinetischen Kompaktieren. Report Ingenieurburo MATFEM 12. Munich
189. J. Vlcek, H. Huber, H. Voggenreiter and E. Lugscheider (2002) Melting upon particle impact in the cold spray process. Materials Week 2002, Int. Congress on Advanced Materials, their Processes and Applications
190. J. Vlcek, et al. (2001) Characteristics of kinetic powder compaction with the cold spray process. Materials Week 2001, Int. Congress on Advanced Materials, their Processes and Applications
191. R. Prummer (1987) Explosivverdichtung pulveriger Supstanzen. Berlin/Heidelberg: Springer Verlag
192. A. Zukas (1990) High velocity impact dynamics. New York: John Wiley and Sons
193. J.R. Asay and M. Shahinpoor (1993) High Pressure Shock Compression of Solids. New York: Springer Verlag 7-113
194. M.A. Meyer and L.E. Murr (Eds) (1981) Appendix F - Tabulation of shock wave parameters, shock waves and high strain rate phenomena in metals New York: Plenum Press 1061ff.
195. G. Welsch, R. Boyer and E.W. Collings (1998) Materials Properties Handbook: Titanium Alloys 2nd edition Materials Park, OH: ASM International 483-636.
196. Y.V. Prasad and S. Sasidhara (1997) Hot working guide: A compendium of processing maps. Materials Park, OH, USA: ASM International 1-24
197. Y.V. Prasad and S. Sasidhara (1997) Hot working guide: A compendium of processing maps. Materials Park, OH, USA: ASM International 1-24
198. H.-J. Frost and M.F. Ashby (1982) Deformation mechanism maps - the plasticity and creep metals and ceramics. Oxford: Pergamon Press
199. P.O. Kettunen (1995) Physical Metallurgy. IMS Tampere University
200. D. Raybould (1980) The cold welding of powders by dynamic compaction. Int. J. of Powder Metallurgy and Powder Technology Vol. 16(No. 1), 9-19.
201. A.P. Alkhimov, V.F. Kosarev and A.N. Papyrin (1990) A method of cold gas dynamic deposition. Sov. Phys. Dokl. Vol. 35 American Institute of Physics 1047-1049. No. 12, Dec. 1991
202. R.C. McCune, A.N. Papyrin, J.N. Hall, W.L. Riggs II and P.H. Zajchowski (1995) An exploration of the cold gas dynamic spray method for several material systems. C.C. Berndt, S. Sampath (Eds) Thermal Spray Science and Technology Materials Park, OH: ASM International 1-5.
203. A.P. Alkhimov, A.I. Gulidov, V.F. Kosarev and N.I. Nesterovich (2000) Specific features of microparticle deformation upon impact on a rigid barrier. J. Appl. Mech. and Tech. Phys. Vol. 41(No. 1), 188-192.
204. H. Lippmann and O. Mahrenholtz (1967) Plastomechanik der Umformung metallischer Werkstoffe. Berlin: Springer Verlag
205. J. Vlcek, et al. (2002) Where are the limits of cold spray? - Ceramic Deposition. New Mexico: cold spray Horisons in Surfacing Technology, Albuquerque
206. D. Zhang, P.H. Shipway and D.G. McCartney (2003) Particle-substrate interactions in cold gas dynamic spraying. B.R. Marple, C. Moreau (Eds) Thermal Spray 2003 Advancing the Science and Applying the Technology Materials Park, OH, USA: ASM Imternational 45-52.
207. B. Crossland (1982) Exposive welding of metals and its application. Oxford: Clarendon Press
208. A.N. Papyrin, V.F. Kosarev, S.V. Klinkov and A.P. Alkhimov (2002) On the interaction of high speed particles with a substrate under the cold spraying. E. Lugssheider (Eds) Tagungsband Conference Proceedings Dusseldorf, Germany: Deutscher Verband Für Schwei_en 380-384.
209. T.H.V. Steenkiste T.H. Van, J.R. Smith, R.E. Teets, J.J. Molrski, et al. (1999) Kinetic spray coatings. Surf. Coat. Technol. Vol. 111(No. 1), 107-115.
210. T.H.V. Steenkiste T.H. Van, J.R. Smith, R.E. Teets, J.J. Moleski, et al. (2002) Aluminum coating via kinetic spray with relatively large powder particles. Surf. Coat. Technol. Vol. 154(No. 2-3), 237-252.
211. A.V. Bolesta, V.M. Fomin, M.R. Sharafutdinov and B.P. Tolochko (2001) Investigation of interface boundary occurring during cold gas-dynamic spraying of metallic particles. Nuclear Inst. and Methods in Phys. Res. A 470 249-252.
212. A.O. Tokarev (1996) Structure of aluminum powder coatings prepared by cold gas dynamic spraying. Metal Sci. and Heat Treatment. Vol. 38 136-139.
213. I.M. Hutchings (1981) A model for the erosion of metals by spherical particles at normal incidence. Wear. Vol. 70 269-281.
214. F. Gaertner, C. Borchers, T. Stoltenhoff, H. Kreye and H. Assadi (2003) Numerical and microstuctural investigations of the bonding mechanisms in cold spraying. B.R. Marple, C. Moreau (Eds) Thermal Spray 2003: Advancing the Science and Applying the Technology Materials Park, OH, USA: ASM International 1-8.
215. R.C. McCune, W.T. Donlon, E.L. Cartwright, A.N. Papyrin, E.F. Rybicki and J.R. Shadley (1996) Characterization of Copper and steel coatings made by the cold gas dynamic spray method. C.C. Berndt (Eds) Thermal Spray: Practical Solutions for Engineering Problems Materials Park, OH, USA: ASM International 397-403.
216. T. Schmidt, H. Kreye and F. Gaertner (2003) High strain rate deformation phenomena in explosive powder compaction and cold spraying. B.R. Marple, C. Moreau (Eds) Thermal Spray 2003: Advancing the Science and Applying the Technology Materials Park, OH, USA: ASM International 9-18.
217. V.F. Nesterenko (1995) Dynamic loading of porous materials: potential and restrictions for Novel materials applications. L.E. Murr, K.P. Staudhammer, M.A. Meyers (Eds) Proc. Int. Conf. on metallurgical and materials application of shock wave and high strain rate phenomena “EXPLOMET 95” Amsterdam: Elsevier 3-28.
218. R.B. Schwarz, P. Kasiraj, T. Vreeland and T.J. Ahrens (1984) A theory for the shock wave consolidation of powders. Acta Metall. Vol. 32 1243-1252.
219. A. Papyrin (2001) Cold Spray technology. Advanced materials and processes. Vol. 159 49-51.
220. T. Stoltenhoff, H. Kreye and H.J. Richter (2002) An analysis of the Cold Spray process and its coatings. Journal of Thermal Spray Technology Vol. 11 1-9.
221. C. Borchers, T. Stoltenhoff, F. Gaertner, H. Kreye and H. Assadi (2001) Deformation microstructure of Cold Sprayed coatings studied by electron microscopy. Mat. Res. Soc. Symp. Proc. 673 7-10.
222. A.A. Deribas and I.D. Zakharenko (1974) Surface effects with oblique collisions between metallic plates. Fisika Goreniya I Vzryva. Vol. 10 409-421.
223. H. Assadi, F. Gaertner, T. Stoltenhoff and H. Kreye (2003) Bonding mechanism in Cold Spraying. Acta Materiala Vol. 51(No. 15), 4379-4394. Sept.
224. G.B. Olson, J.F. Mescall and M. Azrin (1981) Adiabatic deformation and strain localization. M.A. Meyers, L.E. Murr (Eds) Shock waves and high straing rate phenomena in metals New York: Plenum Press 22-100.
225. D.Y. Tzou (1995) ASME J Heat Transfer 117-118.
226. G.S. Prakash, S.S. Reddy, S.K. Das, T. Sundararajan and K.N. Seetharamu (2000) Num Heat Transfer A 38 513.
227. R. Kapoor and S. Nemat-Nasser (1998) Mech Mater. 28 1.
228. G.R. Johnson (1993) Prog Astronaut Aeronaut. 155 165.
229. R.R. Karpp (1993) Prog Astronaut Aeronaut. 155 223.
230. F. Kamler, P. Niessen and R.J. Pick (1995) Can J Phys. 73 295.
231. S. Nemat-Masser and Y. Li (1998) Acta Mater. 46 565.
232. M. Grujicic, C.L. Zhao, W.S. DeRosset and D. Helfricht (2004) Adiabatic shear instability based mechanism for particle/substrate bonding in the cold - gas dynamic-spray process. Materials and Design. Vol. 25(No. 8), 681-688. Dec.
233. T.W. Wright (1992) Shear band susceptibility: work hardening materials. Int J Plasticity Vol. 8(No. 2), 583-602.
234. T.W. Wright (1994) Toward a defect invariant basis for susceptibility to adiabatic shear bands. Mech Mater. Vol. 17(No. 1), 215-222.
235. M. Grujicic, J.R. Saylor, D.E. Beasley, W.S. DeRosset and D. Helfritch (2003) Computational analysis of the interfacial bonding between feed-power particles and the substrate in the cold-gas dynamic-spray process. Applied Surface Sci 219 211-227.
236. T. Schmidt, F. Gartner, T. Stoltenhoff, H. Kreye and H. Assadi (2005) High velocity impact phenomena and coating quality in cold spraying. E. Lugscheider (Eds) Proc. Of Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 232-238.
237. T. Schmidt, F. Gartner, H. Assadi and H. Kreye (2006) Development of a generalized parameter window for cold spray deposition. Acta Mater 54 729-742.
238. R.G. O'Donnel (1993) Parameter describing the cylindrical explosive consolidation technique. Propellants, Explosives, Pyrotechnics Vol. 18 230-236.
239. M.A. Meyers and L.E. Murr (1981) Shock wave consolidation of rapidly solidified superalloy powders. J. Metals. Vol. 33 21-26.
240. D. Raybould (1981) The production of strong parts and non-equilibrium alloys by dynamic compaction. M.A. Meyers, L.E. Murr (Eds) Shock Waves and High-Strain-Rate Phenomena in Metals: Concept and Applications NY: Plenum Press 895-911.
241. D. Raybould (1981) The properties of stainless steel compacted dynamically to produce interparticle, Welding. J. Metals Sci. 16 589-598.
242. D. Raybould, D. Morris and G.A. Cooper (1979) A new powder metallurgy method. J. Metals. Sci. Vol. 14 2523-2526.
243. T.Z. Blazynski (1983) Explosive Welding, forming and Compaction. London, UK: Applied Science Publishers 17-82
244. T.Z. Blazynski (1983) Explosive Welding, forming and Compaction. London, UK: Applied Science Publishers 189-287
245. M. Hammerschmidt (1983) Mikrostruktur und Eigenschaften von Explosivschweissungen. Germany: VDI Verlag GmbH Dusseldorf
246. S.S. Batsanov (1994) Effects of explosion on materials. New York, USA: Springer Verlag 1-90
247. D.G. Morris (1983) Bonding processes during the dynamic compaction of metallic powders. Materials Science and Engineering Vol. 57 187-195.
248. E.P. Carton (1997) Dynamic compaction of ceramics and composites. Delft, Netherlands: Delft University Press
249. L.E. Murr (1988) Shock waves for industrial applications. New Jersey, USA: Noyes Publications, Park Ridge 237-333
250. S. Barradas, R. Molins, M. Jeandin, M. Arrigoni, M. Boustie, C. Bolis, L. Berthe and M. Ducos (2005) Laser shock flier impact simulation of particle-substrate interaction in cold spray. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 343-351.
251. R. Maev, A. Aczel, V. Leshchynsky, G. Salloum and M.-U. Islam M.-Ui (2005) Air gas dynamic spraying of powder mixtures: Theory and application. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 1121-1127.
252. J. Wu, H. Fang, H. Kim and C. Lee Ch. (2006) High speed impact behaviors of Al alloy particle onto mild steel substrate during kinetic deposition. Mater Sci and Eng A Vol. 1 417.
253. J. Wu, H. Fang, H. Kim and C. Lee Ch. (2006) High speed impact behaviors of Al alloy particle onto mild steel substrate during kinetic deposition. Mater Sci and Eng A Vol. 1 114-119.
254. J. Wu, H. Fang, S. Yoon, H. Kim and C. Lee Ch. (2006) The rebound phenomenon in kinetic spraying deposition. Scripta Materialia Vol. 54 665-669.
255. C.-J. Li Ch.-J., W.-Y. Li, Y.-Y. Wang, G.-J. Yang and H. Fukanuma (2005) A theoretical model for prediction of deposition efficiency in cold spraying. Thin Solid Films Vol. 1 489.
256. C.-J. Li Ch.-J., W.-Y. Li, Y.-Y. Wang, G.-J. Yang and H. Fukanuma (2005) A theoretical model for prediction of deposition efficiency in cold spraying. Thin Solid Films Vol. 1 79-85.
257. Z.B. Zhao, B.A. Gillispie and J.R. Smith (2006) Coating deposition by the kinetic spray process. Surface and Coatings Technology Vol. 200(Nos 16-17), 4746-4754. 27 April
258. J. Karthikeyan, T. Laha, K. Balani, A. Agarwal and N. Munroe (2004) Microstructural and electrochemical characterization of cold-sprayed 1100 aluminum coating. Thermal Spray Solutions. Advances in Technology and Application Dusseldorf, Germany: Verband Für Schwei_en and verwandte Verfahren DVS-Verlag GmbH
259. J. Voyer, T. Stoltenhoff and H. Kreye (2003) Development of cold gas sprayed coatings. B.R. Marple, C. Moreau (Eds) Thermal Spray 2003: Advancing the Science and Applying the Technology Materials Park, OH, USA: ASM International 71-78.
260. R. Morgan, P. Fox, J. Pattison, C. Sutcliffe and W. O'Neill (2004) Analysis of cold gas dynamically sprayed aluminum deposits. Materials Letters Vol. 58 1317-1320.
261. K. Balani, T. Laha, A. Agarwal, J. Karthikeyan and N. Munroe (2005) Effect of carrier gases on microstructural and electrochemical behavior of cold-sprayed 1100 aluminum coating. Surface and Coatings Technology Vol. 195(Nos. 2-3), 272-279. 31 May
262. A.C. Hall, D.J. Cook, R.A. Neiser, T.J. Roemer and D.A. Hirschfeld (2005) The effect of a simple annealing heat treatment on the mechanical properties of cold sprayed aluminum. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 251-253.
263. L. Ajdelsztajn, A. Zuniga, B. Jodoin and E.J. Lavernia (2005) Cold spray of Al-Cu- Mg-Fe-Ni alloy with Sc addition. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 245-250.
264. L. Ajdelsztajn, A. Zuniga, B. Jodoin and E.J. Lavernia (2005) Cold gas dynamic spraying of a high temperature Al alloy. Surface and Coating Technology in press
265. P. Richer, B. Jodoin, K. Taylor, E. Sansoucy and M. Johnson (2005) Effect of particle geometry and substrate preparation in cold spray. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 193-198.
266. B. Wielage, T. Grund, S. Ahrens, A. Wank and F. Trommer (2005) CGS sprayed filler coatings for brazing of light weight alloys. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 1245-1249.
267. J. Haynes and J. Karthikeyan (2003) Cold Spray copper application for upper stage rocket engine design. B.R. Marple, C. Moreau (Eds) Thermal Spray 2003: Advancing the Science and Applying the Technology Materials Park, OH, USA: ASM International 45-52.
268. C. Cooley, S. Fentress and T. Jennings (2002) Hot firing of a full scale copper tubular combustion chamber. AAAF 2002-S.18.02, 6th Int. Symp. Propulsion for Space Transportation of the XXIst Century Versailles, France
269. R. Hickman, T. McKechnie, Plasma Processes Inc. and R. Holmes (2001) NASAMarshall Space Flight Center, Material properties of vacuum plasma sprayed Cu-8Cr-4Nb for liquid rocket engines. 37th AIAA/ASME/SAE/ASEE/ Joint propulsion Conf. Salt Lake City, Utah
270. M.F. Smith, J.E. Brockmann, R.C. Dykhuizen, D.L. Gilmore, R.A. Neiser and T.J. Roemer (1999) Cold Spray direct fabrication - high rate, solid state, material consolidation. Materials Research Society Proc. 542 65-76.
271. J. Karthikeyan (2002) Cold Spray processing of metals, alloys, and composites. ASM Thermal spray Society Workshop on Cold Spray
272. T. Xiong, C. Gu Ch., W. Zhang, M.-J. Wu, J. Wu, H. Jin and T. Li (2004) Study of aluminum bronze coating by cold spray process. Thermal Spray Solutions. Advances in Technology and Application Dusseldorf, Germany: Verband Für Schwei_en and verwandte Verfahren DVS-Verlag GmbH
273. E. Galla, D.G. McCartney and P.H. Shipway (2004) Deposition of copper by cold gas dynamic spraying: an investigation of dependence of microstructure and properties of the deposits on the spraying conditions. Thermal Spray Solutions. Advances in Technology and Application Dusseldorf, Germany: Verband Für Schwei_en and verwandte Verfahren DVS-Verlag GmbH
274. H. Fukanuma and N. Ohno (2004) A study of adhesive strength of cold spray coatings. Thermal Spray Solutions. Advances in Technology and Application Dusseldorf, Germany: Verband Für Schwei_en and verwandte Verfahren DVS-Verlag GmbH
275. C.-J. Li, W.-Y. Li, Y.-Y. Wang and H. Fukanuma (2003) Effect of spray angle on deposition characteristics in cold spraying. B.R. Marple, C. Moreau (Eds) Thermal Spray 2003: Advancing the Science and Applying the Technology Materials Park, OH, USA: ASM International 91-96.
276. K. Sakaki, T. Tajima, H. Li, S. Shinkai and Y. Shimizu (2004) Influence of substrate conditions and traverse speed on cold sprayed coatings. Thermal Spray Solutions. Advances in Technology and Application Dusseldorf, Germany: Verband Für Schwei_en and verwandte Verfahren DVS-Verlag GmbH
277. T. Xiong, Z. Bao, T. Li and Z. Li (2005) Study on cold-sprayed copper coating's properties and optimizing parameters for the spraying process. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 178-184.
278. E. Calla, D.G. McCartney and P.H. Shipway (2005) Effect of heat treatment on the structure and properties of cold sprayed copper. E. Lugscheider (Eds) Proc. Thermal spray conf Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 170-176.
279. M.A. Meyers, L.W. Meyers, J. Beatty, U. Andrade, K.S. Vecchio and A.H. Choksi (1992) High strain, high strain rate deformation of copper. M.A. Meyers, L.E. Murr, K.P. Staudhammer (Eds) Shock-wave and High-strainrate Phenomenon in Materials New York: Marcel Dekker 529-542.
280. W.-Y. Li and C.-J. Li (2005) Effect of annealing treatment on the microstructure and properties of cold-sprayed Cu coating. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 1258-1263.
281. J. Lagerbom, H. Makinen and P. Vuoristo (2005) Effect of heat treatment on properties of cold sprayed coatings. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 240-244.
282. K. Taylor, B. Jodoin, J. Karov and P. Richer (2005) Particle loading effect in cold spray. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 186-190.
283. C.-J. Li and W.-Y. Li (2005) Examination of the critical velocity for deposition of particles in cold spraying. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 217-224.
284. Livermore Software Technology Corporation, LS-DYNA theoretical manual, 1998.
285. C. Borchers, F. Gartner, T. Stoltenhoff, H. Assadi and H. Kreye (2003) Microstructural and macroscopic properties of cold sprayed copper coatings. J. of Appl. Phys. Vol. 93(No. 12), 10064-10070.
286. S. Barradas, R. Molis, M. Jeandin, M. Arrigoni, M. Boustie, C. Bolis, L. Berthe and M. Ducos (2005) Application of laser shock adhesion testing to the study of the interlamellar strength and coating-substrate adhesion in cold-sprayed copper coating of aluminum. Surf and Coat Techn Vol. 197 18-27.
287. R.C. McCune, W.T. Donlon, O.O. Popoola and E.L. Cartwright (2000) J. Thermal Spray Technol. Vol. 9(No. 1), 73-82.
288. R.C. McCune, R.P. Cooper and O.O. Popoola (2000) Post-processing of cold spray deposits of copper and iron. C.C. Berndt (Eds) Thermal Spray: Surface Engineering via Applied Research Materials Park, OH: ASM International 905-908.
289. R.C. McCune (2003) Potential applications of cold-spray technology in automative manufacturing. B.R. Marple, C. Moreau (Eds) Thermal Spray 2003: Advancing the Science and Applying the Technology Materials Park, OH, USA: ASM International 63-70.
290. P.M. Nakagawa, F. Kawakami and T. Kudoh (1994) Trends in automative applications of thermal spray technology in Japan. C.C. Berndt, S. Sampath (Eds) Thermal Spray Industrial Application Materials Park OH: ASM International 1-4.
291. R.C. McCune (1996) Thermal spraying: an enabling technology in automobile manufacturing. Proc. Int. Conf. advances in welding technology: the joining of high-performance materials Columbus, OH: Edison Welding Institute 181-189.
292. M.K. Decker, H.D. Tran and Y.-L. Shen (2000) Mechanical properties of cold gasdynamic spray nickel. Sandia National Laboratories Report SAND2000-2679 Albuquerque, NM: Sandia National Laboratories
293. D.L. Ohmann (1998) MS Thesis Madison, WI: University of Wisconsin
294. R.E. Chalmers (2001) Rapid tooling technology from Ford Country. Manufacturing Engineering Vol. 127(No. 5), 36-41.
295. M.K. Decker, R.A. Neiser, D. Gilmore and H.D. Tran (2001) Microstructure and properties of Cold Spray nickel. C.C. Berndt, K.A. Khor, E. Lugscheider (Eds) Thermal Spray 2001: New Surfaces for a New Millennium Materials Park, OH: ASM International 433-439.
296. J.R. Davis (1998) p. 118 Metals handbook Second Edition Materials Park, OH: ASM International p. 118 Desk Edition
297. M.K. Decker (2000) Mechanical properties of cold gas-dynamic spray nickel. Master's thesis Albuquerque, NM: University of New Mexico
298. F. Raletz, G. Ezo'o, M. Vardelle and M. Ducos (2004) Characterization of cold-sprayed nickel-base coatings. Thermal Spray Solutions. Advances in Technology and Application Dusseldorf, Germany: Verband Für Schwei_en and verwandte Verfahren DVS-Verlag GmbH
299. S. Sampath, X.Y. Jiang, J. Matejicek, L. Prchlik, A. Kulkarni and A. Vaidya (2004) Role of thermal spray processing method on the microstructure, residual stress and properties of coatings: an integrated study for Ni-5wt.%Al bond coats. Material Science and Engineering A Vol. 364(No. 1-2), 216-231. 15 January
300. J. Matejicek (1999) Materials science and engineering. PhD Thesis Stony Brook: State University of New York
301. Y.C. Tsui and T.W. Clyne (1997) Thin Solid Films Vol. 306(No. 1), 23.
302. F. Raletz, G. Ezo'o, P. Brenot and M. Vardelle (2005) On the influence of the substrate hardness on cold-sprayed nickel coating. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 1244-1249.
303. B. Wielage, T. Grund, S. Ahrens, A. Wank and F. Trommer (2005) CGS sprayed filler coatings for brazing of light weight alloys. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 1245-1249.
304. C.-J. Li Ch.-J., W.-Y. Li and W.-H. Ma (2004) Characterization of microstructure of nanostructured Fe-Si coating deposited by cold spraying. Thermal Spray Solutions. Advances in Technology and Application Dusseldorf, Germany: Verband Für Schwei_en and verwandte Verfahren DVS-Verlag GmbH
305. M.M. Raja M. Manivel, K. Chattopadhyay, B. Majumdar and A. Narayanasamy (2000) Structure and soft magnetic properties of Finemet alloys. J. of Alloys and Compounds Vol. 297 199-205.
306. G. Herzer (1990) Grain size dependence of coercivity and permeability in nanocrystalline ferromagnets. IEEE Transactions on Magnetics Vol. 26(No. 5), 1397-1402.
307. M. Miyazaki, M. Komatsu and K. Matusita (1992) J. of Applied Physics Vol. 71 2368-2374.
308. N. Stevulova, A. Buchal, P. Petrovic, K. Tkacova and V. Sepelak (1999) Structural investigation of the high-energy milled Fe-Si system. J. of Magnetism and Magnetic Materials Vol. 203(No. 1-3), 190-192.
309. S. Yoon, H.J. Kim and C. Lee Ch. (2006) Deposition behavior of bulk amorphous NiTiZr-SiSn according to the kinetic and thermal energy levels in the kinetic spraying process. Surface and Coatings Technology Vol. 200(Nos 20-21), 6022-6029. 22 May
310. S. Yoon, C. Lee, H.J. Kim and H. Choi (2005) Kinetic spraying deposition behavior of bulk amorphous NiTiZrSiSn feedstock. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 1254-1257.
311. C.-J. Li Ch.-J., W.-Y. Li and H. Fukanuma (2004) Impact fusion phenomenon during cold spraying of zinc. Thermal Spray Solutions. Advances in Technology and Application Dusseldorf, Germany: Verband Für Schwei_en and verwandte Verfahren DVS-Verlag GmbH
312. B. Wielage, H. Podlesak, T. Grund and A. Wank (2005) High resolution microstructural investigations of interfaces between light weight alloy substrates and cold sprayed coatings. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 154-158.
313. R.E. Blose, D. Vasquez and W. Kratochvil (2005) Metal passivation to resist corrosion using the cold spray process. E. Lugscheider (Eds) Proc. Of Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 126-135.
314. B. Wielage, T. Grund, S. Ahrens, A. Wank and F. Trommer (2005) CGS sprayed filler coatings for brazing of light weight alloys. E. Lugscheider (Eds) Proc. Of Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 1245-1249.
315. H. Fukanuma and N. Ohno (2004) A study of adhesive strength of cold spray coatings. Thermal Spray Solutions. Advances in Technology and Application Dusseldorf, Germany: Verband Für Schwei_en and verwandte Verfahren DVS-Verlag GmbH
316. V. Shukla, G.S. Elliott, B.H. Kear and L.E. McCandlish (2001) Hyperkinetic deposition of nanopowders by supersonic rectangular jet impingement. Scripta mater Vol. 44 2179-2182.
317. T. Marrocco, D.G. McCartney, P.H. Shipway and A.J. Sturgeon (2005) Production of titanium deposits by cold gas dynamic spray. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 225-231.
318. J. Karthikeyan, C.M. Kay, J. Lindeman, et al. (2000) Cold spray processing of titanium powder. C.C. Berndt (Eds) Thermal Spray: Surface Engineering via Applied Research Montreal, Quebec, Canada: ASM International 255-262. May 8-11, 2000
319. T. Novoselova, P. Fox, R. Morgan and W. O'Neill (2006) Experimental study of titanium/aluminum deposits produced by cold gas dynamic spray. Surf and Coat Techn. Vol. 200 2775-2783.
320. C.-J. Li Ch.-J., G.-J. Yang Gu.-J., X.-C. Huang Xi.-Ch. and W.-Y. Li (2004) Formation of TiO2 photocatalyst through cold spraying. Thermal Spray Solutions. Advances in Technology and Application Dusseldorf, Germany: Verband Für Schwei_en and verwandte Verfahren DVS-Verlag GmbH
321. A. Fujishima and K. Honda (1972) Electrochemical photolysis of water at a semiconductor electrode. Nature Vol. 238 37-38.
322. D.F. Ollis and H. Al-Ekabi (1993) Photocatalytic purification and treatment of water and air. Amsterdam: Elsevier
323. M.R. Hoffman, S.T. Martin, W. Choi and D.W. Bahnemann (1995) Environmental application of semiconductor photocatalysis. Chem. Rev. Vol. 95 69-96.
324. A. Fujishima, T.N. Rao and D.A. Tryk (2000) Titanium dioxide photocatalysis. J. Photochem. Photobio. C 1 1-21.
325. C.-J. Li and W.-Y. Li (2003) Deposition characteristics of titanium coating in cold spraying. Surf. Coat. Technol. Vol. 167 278-283.
326. H.Y. Lee, Y.H. Yu, Y.C. Lee, Y.P. Hong and K.H. Ko (2004) Interfacial studies between cold-sprayed WO3, Y2O3 films and Si substrate. Applied Surface Science Vol. 227 244-249.
327. H.-K. Kang and S.B. Kang (2003) Tungsten/copper composite deposits produced by a cold spray. Scripta Materialia Vol. 49 1169-1174.
328. H.-J. Kim, C.-H. Lee and S.-Y. Hwang (2005) Fabrication of WC-Co coatings by cold spray deposition. Surf. Coat. Technol. Vol. 191(Nos. 2-3), 335-340. 21 February
329. H.J. Kim, S.Y. Hwang and C.H. Lee (2005) Characterization of nano WC-Co coatings produced by dynamic powder deposition. E. Lugscheider (Eds) Proc. Thermal spray conf. Thermal spray connects: Explore its surfacing potential! Basel, Switzerland, May 2-4 1489-1494.
330. H.-J. Kim, C.-H. Lee Ch.-H. and S.-Y. Hwang (2005) Superhard nano WC-12%Co coating by cold spray deposition. Mat. Sci. Eng. A Vol. 391 243-248.
331. R.S. Lima, J. Karthikeyan, C.M. Kay, J. Lindemann and C.C. Berndt (2002) Microstructural characteristics of cold-sprayed nanostructured WC-Co coatings. Thin Solid Films Vol. 416 129-135.
332. J. Morimoto, T. Onoda, Y. Sasaki and N. Abe (2004) Improvement of solid cold sprayed TiO2-Zn coating with direct diode laser. Vacuum Vol. 73 527-532.
333. D.T. Morelli, A.A. Elmoursi, T.H. VanSteenkiste, D.W. Gorkiewicz and B. Gillispie (2003) Kinetic spray of aluminum metal matrix composites for thermal man- agement applications. C. Moreau, B. Marple (Eds) Thermal Spray 2003: Advancing the Science and Applying the Technology Materials Park, OH, USA: Published by ASM International 85-90.
334. A.L. Geiger, D.P.H. Hasselman and P. Welsh (1997) Acta Mater. Vol. 45(No. 391)
335. Kashirin et. al, US Patent No. 6,756,073, Method for applying sealing coating with low gas permeability.