On apparent bi-linear corrosion rate behavior of Ti grade 7 in basic saturated water (BSW-12) below and above 80°C

NACE - International Corrosion Conference Series

Volumn 2003-April, Issue , 2003, Pages

  Hua, Fred ^a   Gordon, Gerald ^b  

^a McDermott International Inc   (United States)

^b Bechtel SAIC Company LLC   (United States)

Author keywords

Activation energy.; BSW; HLW; Oxide crystal structure; Oxide film thickness; Passive dissolution; Ti grade 7; UNS R52400; Waste container; Yucca mountain project

Indexed keywords

ACTIVATION ANALYSIS; ACTIVATION ENERGY; CORROSION RATE; CORROSION RESISTANCE; CREVICE CORROSION; CRYSTAL ATOMIC STRUCTURE; FILM THICKNESS; GEOLOGICAL REPOSITORIES; OXIDE FILMS; SURFACE ANALYSIS; TITANIUM OXIDES;

CORROSION-RESISTANT MATERIALS; NUCLEAR WASTE REPOSITORIES; OXIDE CRYSTALS; THERMALLY ACTIVATED MECHANISMS; THRESHOLD TEMPERATURES; UNS R52400; WASTE CONTAINERS; YUCCA MOUNTAIN PROJECT;

TITANIUM;

EID: 85046852429     PISSN: 03614409     EISSN: None     Source Type: Book Series    
DOI: None     Document Type: Conference Paper

References (39)

1. R. D. McCright and W. L. Clarke, "Waste Package Design and Container Materials Evaluation for the Yucca Mountain Repository, " Corrosion 1998, Paper No. 159.
2. J. Farmer, D. McCright, G. Gdowski, F. Wang, T. Summers, P. Bedrossian, J. Horn, T. Lian, J. Estill, A. Lingenfelter and W. Halsey, "General and Localized Corrosion of Outer Barrier of High-Level Waste Container in Yucca Mountain, " Proceeding of ASME/PVP Conference, American Society of Mechanical Engineers, Seattle, Washington, July 23-27, 2000.
3. "Executive Summary: Yucca Mountain Science and Engineering Report, Technical Information Supporting Site Recommendation Consideration, " US DOE Office of Civilian Radioactive Waste Management, DOE/RW 0539, May 2001.
4. U.S. Nuclear Waste Technical Review Board, Report to the U.S. Congress and the Secretary of Energy, March 1997, Arlington, VA (1997).
5. International Workshop on Long-Term Extrapolation of Passive Behavior, US Nuclear Waste Technical Review Board, Arlington, VA, July 19-20, 2001.
6. P. L. Andresen, P.W. Emigh, L. M. Young and G. M. Gordon, "Stress Corrosion Cracking of Annealed and Cold Worked Titanium Grade 7 and Alloy 22 in l l0°C Concentrated Salt Environments, " Corrosion 2001, Paper No. 01130, NACE.
7. D. S. Dunn, Y. M. Pan and G. A. Cragnolino, "Stress Corrosion Cracking, Passive, and Localized Corrosion of Alloy 22 High Level Radioactive Waste Containers, " Corrosion 2000, Paper No. 00206.
8. A. Roy and D. Flemming, "Galvanic Corrosion-Effect of Environmental and Experimental Variables, " Corrosion 1999, Paper No. 465.
9. A. Roy and D. Flemming, "Galvanic Corrosion Study of Container Materials Using Zero Resistance Ammeter, " Corrosion 1998, Paper No. 156.
10. T. Lian, S. Martin, D. Jones, A. Rivera and J. Horn, " Corrosion of Candidate Container Materials by Yucca Mountain Bacteria, " Corrosion 1999, Paper No. 476, 1999.
11. J. Horn, S. Martin, B. Masterson and T. Lian, "Biochemical Contributions to Corrosion of carbon Steel and Alloy 22 in a Continual Flow System, " Corrosion 1999, Paper No. 162.
12. J. Horn, S. Martin, A. Rivera, P. Bedrossian and T. Lian, "Potential Biogenic Corrosion of Alloy 22, A Candidate Nuclear Waste Rackaging Material, Under Simulated Repository Conditions, " Corrosion 2000, Paper No. 00387.
13. C. S. Brossia and G.A. Cragnolino, "Effects of Environmental, Electrochemical and Metallurgical Variables on the Passive and Localized Dissolution of Ti Grade 7, " Corrosion 2000, Paper No. 00211.
14. H. Satoh, K. Shimogori and F. Kamikubo, Platinum Metal Review, 31, p. 115 (1987).
15. C. S. Brossia and G. A. Cragnolino, "Effect of Palladium on the Localized and Passive Dissolution of Titanium, " Corrosion 2001, Paper No. 01127.
16. F. Hua and G. Gordon, "Corrosion Behavior of Alloy 22 and Titanium Grade 7 in a Nuclear Waste Repository Environment, " Corrosion, 2002
17. F. H. Hua, J. M. Sarver, J. M. Jevec and G. Gordon, "General Corrosion Studies of Candidate Container Materials in Environments Relevant to Nuclear Waste Repository, " Corrosion 2002, Paper No. 02530.
18. F. Hua, J. Sarver, W. Mohn and G. Gordon, "Crevice Corrosion Behavior of Candidate Nuclear Waste Container Materials in Repository Environment, " Corrosion 2002, Paper No. 02529.
19. ASTM G78-98, "Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments" ASTM, Philadelphia, PA, 1998.
20. G. E. Gdowski, "Formulation and Make-Up of Simulated Dilute Water (SDW), Low Ionic Content Aqueous Solution, " Yucca Mountain Project, Lawrence Livennore National Laboratory, TIP-CM-07, Revision CN TIP-CM-07-0-2, 1997.
21. G. E. Gdowski, "Formulation and Make-Up of Simulated Concentrated Water (SCW), High Ionic Content Aqueous Solution, " Yucca Mountain Project, Lawrence Livermore National Laboratory, TIPCM-08, Revision CN TIP-CM-07-0-2, 1997.
22. G. E. Gdowski, "Formulation and Make-Up of Simulated Acidic Concentrated Water (SAW), Low Ionic Content Aqueous Solution, " Yucca Mountain Project, Lawrence Livermore National Laboratory, TIP-CM-07, Revision CN TIP-CM-08-0-02, 1997.
23. ASTM G1-90, "Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens" ASTM, Philadelphia, PA, 1990.
24. J. Jevec, "Cleaning of Yucca Mountain Corrosion Test Specimens, " McDermott Technology, Inc. RDD-TP-1678, 2001.
25. C. S. Brossia and G. A. Cragnolino, "Effect of Palladium on the Localized and Paasive Dissolution of Titanium, " Corrosion 2001, Paper No. 01127.
26. V. Pathupathi, J.C. Farmer, "Waste Package Degradation Process Model Report, " TDR-WIS-MD-000002, REV 00 ICN 01, June, 2000, CRWMS M&O, Las Vegas, NV.
27. Y. J. Kim, P. L. Andresen, P. J. Martiniano, J. Chera, M. Larsen and G. Gordon, "Passivity of Nuclear Waste Canister Candidate Materials in Mixed-Salt Environments, " Corrosion 2002, Paper No. 02544.
28. CRC "Handbook of Chemistry and Physics", 81st Edition, D. R. Lide, Ed., CRC Press, 2000.
29. J. Farmer, "Long Term Uniform Corrosion of Passive Metals." Presentation of Final Report to Waste Package Materials, Performance Peer Review Panel, Las Vegas, NV, March 18-19, 2002.
30. Y. J. Kim, Private communication, 2002.
31. N. D. Tomashov and P. M. Altovaskii, Corrosion and Protection of Titanium, Government Scientific-Technical Publication of Machine-Building Literature, 1963.
32. S. Ramamurthy and D. Shoesmith, Private communication, 2002.
33. Civilian Radioactive Waste Management System, Management and Operating Contractor, Waste Package Degradation Process Model Report, TDR-WIS-MD-000002, Revision 00 ICN 01, Las Vegas, NV, TRW Environmental Safety System, Inc., (2000).
34. C. S. Brossia and G. A. Cragnolino, "Effects of Environmental, Electrochemical and Metallurgical Variables on the Passive and Localized Dissolution of Ti Grade 7, " Corrosion'2000, Paper No. 00211.
35. H. Satoh, K. Shimogori and F. Kamikubo, Platinum Metal Review, 31, p. 115 (1987).
36. Y. Okazaki, K. Kyo, Y. Ito and T. Tateishi, Materials Transaction, 38, p. 344 (1997).
37. Y. Shida and S. Kitayama, Proceedings of 6 th World Conference on Titanium, p. 1729, 1988.
38. G. M. Gordon, Private communication from J. Estill, LLNL., 2001
39. "Relation of Properties to Processing for Wrought Titanium Alloys, " Metals Handbook, Vol. 3. American Society for Metals, 1980, p. 361-371.