Stress corrosion cracking, passive, and localized corrosion of Alloy 22 high-level radioactive waste containers

NACE - International Corrosion Conference Series

Volumn 2000-March, Issue , 2000, Pages

  Dunn, D S ^a   Pan, Y M ^a   Cragnolino, G A ^a  

^a SOUTHWEST RESEARCH INSTITUTE   (United States)

Author keywords

General corrosion; Localized corrosion; Nickel base alloys; Nuclear waste disposal; Stress corrosion cracking

Indexed keywords

CANTILEVER BEAMS; CORROSION FATIGUE; CORROSION RATE; CRACKS; GRAIN BOUNDARIES; LOCALIZED CORROSION; MAGNESIUM COMPOUNDS; NICKEL ALLOYS; RADIOACTIVE WASTE ENCAPSULATION; RADIOACTIVE WASTE STORAGE; RADIOACTIVE WASTES; RESIDUAL STRESSES; SODIUM CHLORIDE; WASTE DISPOSAL;

CHLORIDE CONCENTRATIONS; DOUBLE CANTILEVER BEAM; GENERAL CORROSION; HIGH LEVEL RADIOACTIVE WASTES; NICKEL BASE ALLOYS; PASSIVE CURRENT DENSITIES; REPASSIVATION POTENTIAL MEASUREMENT; SECONDARY CRACKING;

STRESS CORROSION CRACKING;

EID: 85046777563     PISSN: 03614409     EISSN: None     Source Type: Book Series    
DOI: None     Document Type: Conference Paper

References (20)

1. U. S. Department of Energy. Viability Assessment of a Repository at Yucca Mountain. Volume 3. Total System Performance Assessment. DOE/RW-0508/3. Las Vegas, NV: U. S. Department of Energy, Office of Civilian Radioactive Waste Management. 1998.
2. th Meeting Advisory Committee on Nuclear Waste, Washington, DC, July 20, 1999. Washington, DC: Nuclear Regulatory Commission. 1999.
3. Blink, J. Enhanced design alternative II. DOE/NRC CLST Appendix 7 Meeting on Container Life and Source Term, Lawrence, California, July 7-8, 1999. Lawrence, CA: Lawrence Livermore National Laboratory. 1999.
4. American Society for Testing and Materials. Standard test method for plain-strain fracture toughness of metallic materials: E399-90. Annual Book of ASTM Standards. Volume 03.01: Metallography. Metals-Mechanical Testing: Elevated and Low-Temperature Tests. West Conshohocken, PA: American Society for Testing and Materials: 422-452. 1999.
5. NACE International. Testing of Metals for Resistance to Sulfide Stress Cracking at Ambient Temperatures. NACE Standard TM0T77-90. Houston, TX: NACE International. 1990.
6. Dunn, D. S., G. A. Cragnolino, and N. Sridhar. Methodologies for predicting the performance on Ni-Cr-Mo alloys proposed for high level nuclear waste containers. Scientific Basis for Nuclear Waste Management. Pittsburgh, PA: Materials Research Society. In press. 1999.
7. American Society for Testing and Materials. Standard test method for conducting cyclic potentiodynamic polarization measurements for localized corrosion susceptibility of iron-, nickel- or cobalt-based alloys: G61-86. Annual Book of ASTM Standards. Volume 03.02: Wear and Erosion-Metal Corrosion. West Conshohocken, PA: American Society for Testing and Materials: 237-241. 1999.
8. rd Edition. New York: McGraw-Hill, Inc. 1978.
9. Heady, R. B. Evaluation of sulfide corrosion cracking resistance in low alloy steels. Corrosion 3(7): 98-107. 1977.
10. Roy, A. K., D. L. Fleming, and B. Y. Lum. Stress corrosion cracking of Fe-Ni-Cr-Mo and Ni-Cr-Mo and Ti alloys in 90 °C acidic brine. Proceedings of the CORROSION'98 Conference. Paper No. 157. Houston, TX: NACE International. 1998.
11. American Society for Testing and Materials. Standard practice for calculation of corrosion rates and related information from electrochemical measurements: G102-&9. Annual Book of ASTM Standards. Volume03.02: Wear and Erosion-Metal Corrosion. West Conshohocken, PA: American Society for Testing and Materials: 416-122. 1999.
12. Sridhar, N., G. A. Cragnolino, and D. S. Dunn. Experimental Investigations of Failure Processes of High-Level Nuclear Waste Container Materials. CNWRA 95-010. San Antonio, TX: Center for Nuclear Waste Regulatory Analyses. 1995.
13. Kirchheim, R., B. Heine, H. Fischmeister, S. Hofmann, H. Knote, and U. Stoltz. The passivity of iron-chromium alloys. Corrosion Science 30(7): 899-917. 1989.
14. Okayama, S., Y. Uesugi, and S. Tsujikawa. The effect of alloying elements on the repassivation potential for crevice corrosion on stainless steels in 3% NaCl solution. Corrosion Engineering 36(3): 157-168. 1987.
15. Kolts, J., and N. Sridhar. Temperature effects in localized corrosion. Proceedings of the Corrosion of Nickel-Base Alloys. R. C. Scarberry, ed. Metals Park, OH: American Society for Metals: 191-198. 1985.
16. Dunn, D. S., N. Sridhar, and G. A. Cragnolino. Long-term prediction of localized corrosion of Alloy 825 in high-level nuclear waste repository environments. Corrosion 52(2): 115-124. 1996.
17. Beccaria, A. M., G. Poggi, and G. Castello. Influence of passive film composition and sea water pressure on resistance to localized corrosion of some stainless steels in sea water. British Corrosion 30(4): 283-287. 1995.
18. Brown, B. F. The application of fracture mechanics to stress-corrosion cracking. Metallurgical Reviews 13:171-183. 1968.
19. Speidel, M. O. Stress corrosion cracking on stainless steels in NaCl solutions. Metallurgical Transactions 12 A: 779-789. 1981.
20. TRW Environmental Safety Systems, Inc. Waste Package Phase II Closure Methods Report. BBA000000-01717-5705-00016. Revision 00. Las Vegas, NV: TRW Environmental Safety Systems, Inc. 1998.