Switched reluctance motor drives: Modeling, simulation, analysis, design, and applications

Switched Reluctance Motor Drives: Modeling, Simulation, Analysis, Design, and Applications

Volumn , Issue , 2017, Pages 1-398

  Krishnan, R ^a  

^a Virginia Polytechnic Institute and State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ACOUSTIC NOISE; CONTROLLERS; ELECTRIC DRIVES; ELECTRIC MACHINE THEORY; ELECTRIC MOTORS; POWER CONVERTERS;

APPLICATION EXAMPLES; ELECTRICAL MACHINE; FIRST PRINCIPLES; HIGH-PERFORMANCE CONTROLLERS; PERFORMANCE OPTIMIZATIONS; POWER ELECTRONIC CONVERTERS; SWITCHED RELUCTANCE MACHINE; SWITCHED RELUCTANCE MOTOR DRIVES;

RELUCTANCE MOTORS;

EID: 85044022297     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/9781420041644     Document Type: Book

References (277)

1. Nasar, S.A., D.C.-switched reluctance motor, in Proceedings of the Institution of Electrical Engineers (London), Vol. 116, No. 6, June 1969, pp. 1048.
2. Byrne, J. and J.C. Lacy, Electrodynamic system comprising a variable reluctance machine, U.S. Patent 3956678, May 1976.
3. Lawrenson, PJ., J.M. Stephenson, P.T. Blenkinsop, J. Corda, and N.N. Fulton, Variable- speed switched reluctance motors, IEEE Proc. Electrical Power Appl. B, 127(4), 253-265, 1980.
4. Finch, J.W., M.R. Harris, and H.M.B. Metwally, Variable speed drives using multitooth per pole switched reluctance motors, in Proc. 13th Annual Symposium on Incremental Motion Control Systems and Devices, May 1984, pp. 293-301.
5. Lindsay, J.F., R. Arumugan, and R. Krishnan, Finite-element analysis characterization of a switched reluctance motor with multitooth per stator pole, IEEE Proc. Electrical Power Appl. B, 133(6), 347-353, 1986.
6. Corda, J. and J.M. Stephenson, Analytical estimation of the minimum and maximum inductances of a double-salient motor, in Proc. of Int. Conf. on Stepping Motors and Systems, Sept. 1979, Leeds, pp. 50-59.
7. Materu, P. and R. Krishnan, Analytical prediction of SRM inductance profile and steady-state average torque, in Conf. Rec. of the 1990 IEEE IAS Ann. Mtg., Oct. 1990, Seattle, WA, pp. 214-223.
8. Arumugan, R., D.A. Lowther, R. Krishnan, and J.F. Lindsay, Magnetic field analysis of a switched reluctance motor using a two-dimensional finite-element model, IEEE Trans. on Magnetics, 21(5), 1883-1885, 1985.
9. Miller, T.J.E., Switched Reluctance Motors and Their Control, Magna Physics Publishing/Clarendon Press, Oxford, 1993.
10. Krishnan, R., R. Arumugan, and J.F. Lindsay, Design procedure for switched- reluctance motors, IEEE Trans. on Industry Appl., 24(3), 456-461, 1988.
11. Krishnan, R., M. Abouzeid, and X. Mang, A design procedure for axial field switched reluctance motors, in Conf. Rec. of the 1990 IEEE IAS Ann. Mtg., Vol. 1, Oct. 1990, Seattle, WA, pp. 241-246.
12. Unnewehr, L.E. and W.H. Koch, An axial air-gap reluctance motor for variable speed applications, IEEE Trans. on Power Apparatus and Systems, PAS-93, 1974, pp. 367-376.
13. Chan, S. and H.R. Bolton, Development of sub-kW single phase switched reluctance motor drives, in Proc. Int. Conf. on Electrical Machines, Vol. 2, Sept. 1992, Manchester, U.K., pp. 527-531.
14. Chan, S. and H.R. Bolton, Performance enhancement of single phase switched reluctance motor by dc link voltage boosting, IEEE Proc. B, 140(5), 316-322, 1993.
15. Hendershot, J.R., Jr., Switched reluctance brushless DC motors with low loss magnetic circuits, Proc. Sixteenth International Intelligent Motion (Motor-Con) Conference, Intertec Commun., 1989, pp. 482-497.
16. Chatratana, S. and H.R. Bolton, Investigations into small, single phase switched reluctance motors, in Proc. IEEE Conf. on Small and Special Electrical Machines, Sept. 1981, pp. 99-102.
17. Compter, J.C., Microprocessor controlled single phase reluctance motor, in Proc. Drives/Motors/Controls Conf., Oct. 1984, pp. 64-68.
18. Compter, J.C., Single Phase Reluctance Motor, U.S. Patent No. 4,616,165, Oct. 1986.
19. Horst, G.E., Shifted Pole Single Phase Variable Reluctance Motor, U.S. Patent No. 5,294,856, March 15, 1994.
20. Stephenson, J.M., Apparatus and Method for Starting a Single-Phase Variable Reluctance Motor, U.S. Patent No. 5,808,389, Sept. 15, 1998.
21. Lim, J.Y., H.S. Kim, J.Y. Oh, D.H. Cheong, and J.C. Kim, A performance of single switched reluctance having both radial and axial air gap, in IEEE Industrial Electronics Conf. Rec., Nov. 1998, Aachen, Germany, pp. 905-910.
22. Adamiak, K., D. Barlow, C.P. Choudhury, P.M. Cusack, G.E. Dawson, A.R. Eastham, B. Grady, E. Ho, Y. Hongping, L. Pattison, and J. Welch, The switched reluctance motor as a low-speed linear drive, in Int. Conf. on Maglev and Linear Drives, May 1987, Las Vegas, NV, pp. 39-43.
23. Deshpande, U.S., J.J. Cathey, and E. Richter, A high force density linear switched reluctance machine, in Conf. Rec. of the 1993 IEEE IAS Ann. Mtg., Vol. 1, Oct. 1993, Toronto, Canada, pp. 251-257.
24. Corda, J. and E. Skopljak, Linear switched reluctance actuator, in Sixth Int. Conf. on Electrical Machines and Drives, Sept. 1993, Oxford, U.K., pp. 535-539.
25. Matt, D., R. Goyet, J. Lucidarme, and C. Rioux, Longitudinal-field multi-air gap linear reluctance actuator, Electric Machines Power Syst., 13(5), 299-313, 1987.
26. Lucidarme, J., A. Amouri, and M. Poloujadoff, Optimum design of longitudinal field variable reluctance motors-application to a high performance actuator, IEEE Trans. on Energy Conversion, 8(3), 357-361, 1993.
27. Boldea, I. and S.A. Nasar, Linear Electric Actuators and Generators, Cambridge University Press, Cambridge, U.K., 1997, 163-178.
28. Lee, Byeong-Seok, Han-Kyung Bae, Praveen Vijayraghavan, and R. Krishnan, Design of a linear switched reluctance machine, in Conf. Rec. of the 1999 IEEE IAS Ann. Mtg., Oct. 1999, Phoenix, AZ, pp. 2267-2274.
29. Bae, Han-Kyung, Byeong-Seok Lee, Praveen Vijayraghavan, and R. Krishnan, Linear switched reluctance motor: converter and control, in Conf. Rec. of the 1999 IEEE IAS Ann. Mtg., Oct. 1999, Phoenix, AZ, pp. 547-554.
30. Krishnan, R., B.-S. Lee, and P. Vallance, Integral linear switched reluctance machine based guidance, levitation and propulsion system, in Proc. Maglev 2000 Conf., June 7-10, 2000, Rio de Janeiro, Brazil, pp. 281-286.
31. Corda, J. and M. Wilkinson, Prediction and measurement of magnetic parameters of cylindrical linear switched reluctance actuator, in Proc. of Int. Conf. on Electrical Machines, Vol. 3, Sept. 1994, Paris, pp. 479-484.
32. Corda, J. and M. Wilkinson, Modelling of static thrust characteristics of cylindrical linear switched reluctance actuator, in Seventh Int. Conf. on Electrical Machines and Drives, Sept. 1995, Durham, U.K., pp. 354-358.
33. Liu, C.T. and Y.N. Chen, On the feasible polygon classifications of linear switched reluctance machines, 1997 IEEE Int. Electric Machines and Drives Conf. Rec., May 1997, Milwaukee, WI, pp. TB1/11.1-11.3.
34. Liu, C.T., K.S. Su, and M.H. Lee, Three dimensional field and side-force design analyses of a transverse flux linear switched-reluctance machine, IEEE Trans. on Magnetics, 34(4), 2132-2134, 1998.
35. Liu, C.T. and N. Sheu, Optimal pole arrangement design of a linear switched- reluctance machine for magnetic levitation and propulsion system, IEEE Trans. on Magnetics, 32(5), 5067-5069, 1996.
36. Miller, T.J.E. and M. McGilp, Nonlinear theory of the switched reluctance motor for rapid computer-aided design, IEE Proc. B, 137(6), 337-346, 1990.
37. Lindsay, J.F., R. Arumugam, and R. Krishnan, Finite element analysis characterization of a switched reluctance motor with multi-tooth per stator pole, IEE Proc. B, 133(6), 347-353, 1986.
38. Corda, J. and J.M. Stephenson, An analytical estimation of the minimum and maximum inductances of a double-salient motor, in Proc. of the Int. Conf. on Stepping Motors and Systems, Leeds, 1979, pp. 50-59.
39. Radun, A., Analytical calculation of the switched reluctance motor's unaligned inductance, IEEE Trans. on Magnetics, 35(6), 4473-4481, 1999.
40. Stephenson, J.M. and J. Corda, Computation of torque and current in doubly salient reluctance motors from nonlinear magnetization data, IEEE Proc., 127(5), 393-396, 1979.
41. Esatham, A.R., H. Yuan, G.E. Dawson, P.C. Choudhury, and P.M. Cusack, A finite element evaluation of pole shaping in switched reluctance motors, Electrosoft, 1(1), 55-67, 1990.
42. Arumugam, R., D.A. Lowther, R. Krishnan, and J.F. Lindsay, Magnetic field ananlysis of a switched reluctance motor using a two-dimensional finite element model, IEEE Trans. on Magnetics, Vol. MAG-21, No. 5, 1883-1885, 1985.
43. Arumugam, R., Design and Finite Element Analysis of Switched Reluctance Motors, Ph.D. thesis, Concordia University, Montreal, Canada, December 1987.
44. Lee, B.-S., H.-K. Bae, P. Vijayraghavan, and R. Krishnan, Design of a linear switched reluctance machine, in IEEE Ind. Appl. Soc. Conf. (IAS '99), Vol. 4, Oct. 3-7, 1999, Phoenix, AZ, pp. 2267-2274.
45. Krishnan, R., M. Abou-Zeid, and X. Mang, A design procedure for axial field switched reluctance motors, in IEEE Ind. Appl. Soc. Ann. Mtg. Conf. Rec., Oct. 1990, Seattle, WA, pp. 241-246.
46. Materu, P. and R. Krishnan, Analytical prediction of SRM inductance profile and steady state average torque, in IEEE Ind. Appl. Soc. Ann. Mtg. Conf. Rec., Oct. 1990, Seattle, WA, pp. 214-223.
47. Deshpande, U.S., J.J. Cathey, and E. Richter, A high force density linear switched reluctance machine, in Conf. Rec. of the 1993 IEEE IAS Ann. Mtg., Vol. 1, Oct. 1993, Toronto, Canada, pp. 251-257.
48. Roters, H.C., Electromagnetic Devices, Wiley, New York, 1941.
49. Corda, J. and M. Wilkinson, Prediction and measurement of magnetic parameters of cylindrical linear switched reluctance actuator, in Proc. of Int. Conf. on Electrical Machines, Vol. 3, Sept. 1994, Paris, France, pp. 479-484.
50. Lee, B.S., Linear Switched Reluctance Machine Drives with Electromagnetic Levitation and Guidance Systems, Ph.D. thesis, The Bradley Department of Electrical and Computer Engineering, Virginia Tech., Blacksburg, VA, Nov. 2000.
51. Miller, T.J.E., Switched Reluctance Motors and their Control, Magna Physics Publishing and Oxford University Press, London, 1993.
52. Lawrenson, P.J., J.M. Stephenson, P.T. Blenkinsop, J. Corda, and N.N. Fulton, Variable- speed switched reluctance motors, IEEE Proc. B, 127(4), 253-265, 1980.
53. Harris, M.R., J.W. Finch, J.A. Mallick, and T.J.E. Miller, A review of the integral horsepower switched reluctance drive, in IEEE IAS Conf. Proc., 1985, pp. 783-789.
54. Ray, W.F., PJ. Lawrenson, R.M. Davis, J.M. Stephenson, N.N. Fulton, and R.J. Blake, High performance switched reluctance brushless drives, in IEEE IAS Conf. Proc., 1985, pp. 1769-1776.
55. Krishnan, R. and R. Bedingfield, Dynamic analysis of an SRM drive system, in IEEE IAS Ann. Mtg, 1991, pp. 265-271.
56. Chappell, P.H., Current pulses in switched reluctance motor, IEEE Proc. B, 135(5), 1998.
57. Harris, M.R., J.W. Finch, J.A. Mallick, and T.J.E. Miller, A review of the integral horsepower switched reluctance drive, in IEEE IAS Conf. Proc., 1985, pp. 783-789.
58. Stephenson, J.M., PJ. Lawrenson, and N.N. Fulton, High power switched reluctance drives, in Int. Conf. on Elec. Machines, 1986, pp. 1052-1055.
59. Harris, M.R. and T.J.E. Miller, Comparision of design and performance parameters in switched reluctance and indution motors, EMD, 303-556, 1989.
60. Byrne, J.V. and M.F. McMullin, Design of a reluctance motor as a 10-kW spindle drive, ICI, 407-421, 1982.
61. Bryne, J.V., Design and performance of a saturable variable reluctance servo motor, MOTOR-CON, 139-146, 1985.
62. Egan, M.G., J.M.D. Murphy, P.F. Kennelly, and J.V. Lawton, A high performance variable reluctance drive: achieving servomotor control, MOTOR-CON, 161-168, 1985.
63. Torrey, D.A. and J.H. Lang, Progress of the development of 60-kW variable reluctance motor drive for electric vehicle propulsion, MOTOR-CON, 169-178, 1985.
64. Ferreira, C.A. and W.D. Jones, Detailed design of a 30-kW switched reluctance starter/generator system for a gas turbine engine application, in IEEE IAS Conf. Proc., 1993, 97-105.
65. Miller, T.J.E. and M. McGilp, Nonlinear theory of the switched reluctance motor for rapid computer-aided design, IEEE Proc. B, 137(6), 337-346, 1990.
66. Lindsay, J.F., R. Arumugam, and R. Krishnan, Finite element analysis characterization of a switched reluctance motor with multi-tooth per stator pole, IEEE Proc. B, 133(6), 347-353, 1986.
67. Miller, T.J.E., Ed., Switched Reluctance Motor Drives, Intertec Communications PCIM Series in Power Electronics and Intelligent Motion, Ventura, CA, 1988.
68. Fulton, N.N. and J.M. Stephenson, A review of switched reluctance machine design, Int. Conf. on Electric Machines, 1988.
69. Corda, J. and J.M. Stephenson, An analytical estimation of the minimum and maximum inductances of a double-salient motor, in Proc. of the Int. Conf. on Stepping Motors and Systems, Leeds, U.K., 1979, pp. 50-59.
70. Radun, A.V., Analytical calculation of the switched reluctance motor's unaligned inductance, IEEE Trans. on Magnetics, 35(6), 4473-4481, 1999.
71. Stephenson, J.M. and J. Corda, Computation of torque and current in doubly salient reluctance motors from nonlinear magnetization data, IEEE Proc. B, 127(5), 393-396, 1979.
72. Krishnan, R., R. Arumugam, and J.F. Lindsay, Design procedure for switched-reluctance motors, IEEE Trans. on Industry Appl. 24(3), 456-461, 1988.
73. Radun, A.V., Design considerations for the switched reluctance motor, IEEE Trans. on Industry Appl., 31, 1049-1087, 1995.
74. Eastham, A.R., H. Yuan, G.E. Dawson, P.C. Choudhury, and P.M. Cusack, A finite element evaluation of pole shaping in switched reluctance motors, Electrosoft, 1(1), 55-67, 1990.
75. Arumugam, R., D.A. Lowther, R. Krishnan, and J.F. Lindsay, Magnetic field ananlysis of a switched reluctance motor using a two-dimensional finite element model, IEEE Trans. on Magnetics, 1883-1885, 1985.
76. Finch, J.W., M.R. Harris, A. Musoke, and H.M.B. Metwally, Variable speed drives using multi-tooth per pole switched reluctance motors, in Proc. 13th Ann. Symp. on Incremental Motion Control Systems and Devices, 1984, pp. 293-301.
77. Byrne, J. and J.C. Lacy, Electrodynamic System Comprising a Variable Reluctance Machine, U.S. Patent No. 3, 956, 678, May 1976.
78. Arumugam, R., Design and Finite Element Analysis of Switched Reluctance Motors, Ph.D. thesis, Concordia University, Montreal, Canada, December 1987.
79. Materu, P.N., Design and Steady-State Analysis of the Switched Reluctance Motor Drive, Ph.D. thesis, The Bradley Dept. of Electrical and Computer Engineering, Virginia Tech., Blacksburg, VA, July 1989.
80. Lee, B.-S., H.-K. Bae, P. Vijayraghavan, and R. Krishnan, Design of a linear switched reluctance machine, IEEE Industry Appl. Conf. (IAS '99), Vol. 4, Oct. 3-7, 1999, Phoenix, AZ, pp. 2267-2274.
81. Bae, H.-K., B.-S. Lee, P. Vijayraghavan, and R. Krishnan, Linear switched reluctance motor: converter and control, IEEE Industry Appl. Soc. Conf. (IAS '99), Vol. 1, Oct. 3-7, 1999, Phoenix, AZ, pp. 547-554.
82. Neagoe, C., A. Foggia, and R. Krishnan, Impact of pole tapering on the electromagnetic torque of the switched reluctance motor, in IEEE Int. Electric Machines and Drives Conf., May 1997, Milwaukee, WI.
83. Krishnan, R., M. Abou-Zeid, and X. Mang, A design procedure for axial field switched reluctance motors, in IEEE Ind. Appl. Soc. Ann. Mtg. Conf. Rec., Oct. 1990, Seattle, WA, pp. 241-246.
84. Materu, P. and R. Krishnan, Analytical prediction of SRM inductance profile and steady state average torque, in IEEE Ind. Appl. Soc. Ann. Mtg. Conf. Rec., Oct. 1990, Seattle, WA, pp. 214-233.
85. Krishnan, R. and P. Materu, Measurement and instrumentation of a switched reluctance motor, in IEEE Ind. Appl. Soc. Ann. Mtg. Conf. Rec., Oct. 1989, San Diego, CA, pp. 116-121.
86. Arumugam, R., J.F. Lindsay, and R. Krishnan, Sensitivity of pole arc/pole pitch ratio on switched reluctance motor performance, IEEE Ind. Appl. Soc. Ann. Mtg. Conf. Rec., Oct. 1988, Pittsburgh, PA, pp. 50-54.
87. Materu, P.N. and R. Krishnan, Estimation of switched reluctance motor losses, IEEE Trans. on Ind. Appl., 28(3), 668-697, 1992.
88. Krishnan, R., A.S. Bharadwaj, and P.N. Materu, Computer aided design of electrical machines for variable speed applications, IEEE Trans. on Industrial Electronics, 36(4), 560-571, 1988.
89. Adamiak, K., D. Barlow, C.P. Choudhury, P.M. Cusack, G.E. Dawson, A.R. Eastham, B. Grady, E. Ho, Y. Hongping, L. Pattison, and J. Welch, The switched reluctance motor as a low-speed linear drive, in Int. Conf. on Maglev and Linear Drives, May 1987, Las Vegas, NV, pp. 39-43.
90. Takayama, K., Y. Takasaki, R. Ueda, and T. Sonoda, Thrust force distribution on the surface of stator and rotor poles of switched reluctance motor, IEEE Trans. on Magnetics, 25(5), 3997-3999, 1989.
91. Cusack, P.M., G.E. Dawson, and T.R. Eastham, Design, control and operation of a linear switched reluctance motor, in Canadian Conf. on Electrical and Computer Eng., Sept. 1991, Quebec, Canada, pp. 1911-1915.
92. Liu, C.T. and Y.N. Chen, On the feasible polygon classifications of linear switched reluctance machines, in 1997 IEEE Int. Electric Machines and Drives Conf. Rec., May 1997, Milwaukee, WI, pp. 111-113.
93. Deshpande, U.S., J.J. Cathey, and E. Richter, A high force density linear switched reluctance machine, in Conf. Rec. of the 1993 IEEE IAS Ann. Mtg., Vol. 1, Oct. 1993, Toronto, Canada, pp. 251-257.
94. Roters, H.C., Electromagnetic Devices, Wiley, New York, 1941.
95. Corda, J. and E. Skopljak, Linear switched reluctance actuator, in Sixth Int. Conf. on Electrical Machines and Drives, Oxford, U.K., Sept. 1993, Oxford, U.K., pp. 535-539.
96. Corda, J. and M. Wilkinson, Prediction and measurement of magnetic parameters of cylindrical linear switched reluctance actuator, in Proc. of Int. Conf. on Electrical Machines, Vol. 3, Sept. 1994, Paris, France, pp. 479-484.
97. Corda, J. and M. Wilkinson, Modelling of static thrust characteristics of cylindrical linear switched reluctance actuator, in Seventh Int. Conf. on Electrical Machines and Drives, Sept. 1995, Durham, U.K., pp. 354-358.
98. Matt, D., R. Goyet, J. Lucidarme, and C. Rioux, Longitudinal-field multi-airgap linear reluctance actuator, Electric Machines and Power Systems, 13(5), 299-313, 1987.
99. Lucidarme, J., A. Amouri, and M. Poloujadoff, Optimum design of longitudinal field variable reluctance motors-application to a high performance actuator, IEEE Trans. on Energy Conversion, 8(3), 357-361, 1993.
100. Boldea, I. and S.A. Nasar, Linear Electric Actuators and Generators, Cambridge University Press, Cambridge, U.K., pp. 163-178, 1997.
101. Lee, B.S., Linear Switched Reluctance Machine Drives with Electromagnetic Levitation and Guidance Systems, Ph.D. thesis, The Bradley Dept. of Electrical and Computer Engineering, Virginia Tech., Blackburg, VA, 2000.
102. Bedord, B.D., Compatible Brushless Reluctance Motors and Controlled Switch Circuits, U.S. Patent No. 3,679,953, July 25, 1972.
103. Davis, R.M. and R.J. Blake, Inverter drive for switched reluctance motor circuits and component ratings, IEE Proc., 126-136, 1981.
104. Miller, T.J.E., Converter volt-ampere requirements of the switched reluctance motor drive, IEEE Trans. Ind. Appl., Vol. 21, No. 5, 1136-1144, 1985.
105. Farzanehfard, H. and R. Krishnan, A fully controlled converter for switched reluctance motor, in Proc. VPEC Ann. Sem., Nov. 4, 1986, Virginia Tech., Blacksburg, VA.
106. Davis, R.M. et al., Electric Power Converter Circuit, U.S. Patent No. 4,563,619, Jan. 7, 1986.
107. Ehsani, M., J.T. Bass, T.J.E. Miller, and R.L. Steigerwald, Development of a unipolar converter for variable reluctance motor drives, IEEE Trans. Ind. Appl., Vol. 23, No. 3, 545-553, 1987.
108. Miller, T.J.E. et al., Regenerative Unipolar Converter for Switched Reluctance Motors Using One Switching Device per Phase, U.S. Patent No. 4,684,867, Aug. 4, 1987.
109. Pollock, C. and B.W. Williams, A unipolar converter for a switched reluctance motor, IEEE IAS, 44-49, 1988.
110. Dunlop, G.R., Power device reduction using negative torque sequences in switched reluctance motors, ICEM, 595-598, 1988.
111. Krishnan, R. and P. Materu, Design of a single-switch-per-phase converter for switched reluctance motor drives, IEEE Trans. on Industrial Electronics, 37(6), 469-476, 1990.
112. Krishnan, R. and P. Materu, Analysis and design of a new converter ropology for switched reluctance motor drives, IEEE IAS, 1181-1185, 1989.
113. Huy, H.L., P. Viarouge, and B. Franouer, A novel unipolar converter for switched reluctance motor, IEEE PESC, 3-10, 1989.
114. Krishnan, R. and P. Materu, Analysis and design of a low cost converter for switched reluctance motor drives, IEEE Trans. on Industry Appl., 29(2), 320-327, 1993.
115. Huy, H.L., P. Viarouge, and B. Franouer, Unipolar converter for switched reluctance motor, IEEE IAS, 551-560, 1989.
116. Vukosavic, S. and V.R. Stefanovic, SRM inverter topologies: a comparative evaluation, IEEE IAS, 946-958, 1990.
117. Pollock, C. and B.W. Williams, Power converter circuits for switched reluctance with the minimum number of switches, IEE Proc., Vol. 137, Pt. B, No. 6, 373-384, 1990.
118. Pollock, C. and B.W. Williams, A unipolar converter for a switched reluctance motor, IEEE Trans. Ind. Appl., Vol. 26, No. 2, 222-228, 1990.
119. Huy, H.L., P. Viarouge, and K. Slimani, A current controlled quasi-resonant converter for switched reluctance motor, IEEE, 1022-1028, 1990.
120. Harris, W.A., Switched reluctance motor control circuit with energy recovery capability, U.S. Patent No. 5,075,610, Dec. 24, 1991.
121. Ehsani, M., I. Husain, K.R. Ramani, and J.H. Galloway, Dual decay converter for switched reluctance motor drives in low voltage application, IEEE PESC, 620-624, 1991.
122. Hava, A., V. Blasko, and T.A. Lip, A Modified C-dump converter for variable reluctance machines, IEEE IAS, 886-891, 1991.
123. Doncker, R.W.D. and J.P. Lyons, An auxiliary quasi-resonant dc link inverter for switched reluctance machines, EPE, 18-23, 1991.
124. Vukosavic, S. and V.R. Stefanovic, SRM inverter topologies: a comparative evaluation, IEEE, 1034-1047, 1991.
125. Schramm, D.S., B.W. Williams, and T.C. Green, A new reluctance motor drive configuration, EPE Proc., 394-397, 1991.
126. Sood, P.K., Power Converter for a Switched Reluctance Motor, U.S. Patent No. 5,115,181, May 9, 1992.
127. Park, S.S. and T.A. Lipo, New series resonant converter for variable reluctance motor drive, IEEE PESC, 833-838, 1992.
128. Hava, A., J.B. Wacknov, and T.A. Lipo, New ZCS resonant power converter topologies for variable reluctance machine drives, IEEE PESC, 432-439, 1993.
129. Chan, S. and H.R. Bolton, Performance enhanced of single phase switched reluctance motor by dc link voltage boosting, IEE Proc., 316-322, 1993.
130. Pillay, P., R. Samudio, M. Ahmed, and R. Patel, A chopper controlled SRM drive for reduced acoustic noise and improved ride through capability using super capacitors, IEEE IAS, 313-321, 1994.
131. Rim, G.H. and W.H. Kim, A novel converter topology for switched reluctance motor drives improving efficiency and simplifying control strategy, IEEE PESC, 937-942, 1994.
132. Kim, E.S., K.C. Lee, G.H. Rim, and W.H. Kim, A choppingless converter for switched reluctance motor with unity power factor and sinusoidal input current, IEEE PESC, 500-507, 1994.
133. Jang, D.H., I. Husain, and M. Ehsani, Efficiency and performance analysis of the dual decay converter for switched reluctance motor drives, IEEE IAS, 658-664, 1994.
134. Pillay, P., R. Samudio, M. Ahmed, and R. Patel, A chopper controlled SRM drive for reduced acoustic noise and improved ride through capability using super capacitors, IEEE Trans. on Industry Appl. 31(5), 1029-1037, 1995.
135. Mir, S., I. Husain, and M. Elbuluk, Energy efficient C-dump converters for switched reluctance motors, IEEE APEC, 968-973, 1996.
136. Gharpure, V.S., R. Krishnan, and S. Lee, Analysis and design of energy recovery snubbers for switched reluctance motor drives, IEEE IAS, 1055-1062, 1994.
137. Krishnan, R. and S. Lee, Analysis and design of a single switch per phase converter for switched reluctance motor drives, IEEE PESC, 485-492, 1994.
138. Rim, G. and R. Krishnan, Variable speed constant frequency power conversion with a switched reluctance machine, IEEE APEC, 63-71, 1994.
139. Bolognani, S., E. Ognibeni, and M. Zigliotto, Sliding mode control of the energy recovery chopper in a C-dump switched reluctance motor drive, IEEE APEC, 188-194, March 1991.
140. Krishnan, R. and P.N. Materu, Design of a single-switch-per-phase converter for switched reluctance motor drives, IEEE Trans. Ind. Electr., Vol. 37, No. 6, 469-476, Dec. 1990.
141. Materu, P., R. Krishnan, and H. Farzanehfard, steady-state analysis of the variable speed switched reluctance motor drive, IEEE Ind. Electr. Conf., Conf. Record, Boston, 294-302, Nov. 1987.
142. Krishnan, R., A novel converter topology for switched reluctance motor drives, Conf. Rec., IEEE PESC, Baveno, Italy, 1811-1816, June 23-27, 1996.
143. Krishnan, R., Electric Motor Drives, Prentice-Hall, Englewood Cliffs, NJ, 2001.
144. Krishnan, R., X. Mang, and A.S. Bharadwaj, A low-cost SRM analog controller, Electronic Motortechnics, Feb/March 1990, pp. 19-23.
145. John, G. and A.R. Eastham, Speed control of SRM using slide mode control strategy, Conf. Rec. IEEE IAS Ann. Mtg., Oct. 1995, pp. 263-270.
146. Buja, G.S., R. Menis, and M.I. Valle, Variable structure control of an SRM drive, IEEE Trans. on Industrial Electronics, 40(1), 56-63, 1993.
147. Schramm, D.S., B.W. Williams, and T.C. Green, Torque ripple reduction of switched reluctance motors by phase current optimal profiling, IEEE Power Electronics Specialist Conf., 1992, pp. 857-860.
148. Ilic-Spong, M., T.J.E. Miller, S.R. MacMinn, and J.S. Thorp, Instantaneous torque control of electric motor drives, IEEE Trans. on Power Electronics, 2(1), 55-61, 1987.
149. Wallace, R.S. and D.G. Taylor, A balanced commutator for switched reluctance motors to reduce torque ripple, IEEE Trans. on Power Electronics, 7(4), 617-626, 1992.
150. Kim, C.H. and I.J. Ha, A new approach to feedback-linearizing control of variable reluctance motors for direct-drive applications, IEEE Trans. on Control Syst. Technol., 4(4), 348-362, 1996.
151. Pillay, P., Y. Liu, W. Cai, and T. Sebastian, Multiphase operation of switched reluctance motor drives, IEEE Ind. Appl. Soc. Ann. Mtg. Conf. Rec., 1997, pp. 310-317.
152. Krause, P.C., Analysis of Electric Machinery, McGraw-Hill, 1986.
153. Bae, H.K. and R. Krishnan, A study of current controllers and development of a novel current controller for high performance SRM drives, IEEE Ind. Appl. Soc. Ann. Mtg. Conf. Rec., 1996, pp. 68-75.
154. Slotine, J.J.E. and W. Li, Applied Nonlinear Control, Prentice-Hall, Englewood Cliffs, NJ, 1991.
155. Bae, H.K., B.S. Lee, P. Vijayraghavan, and R. Krishnan, A linear switched reluctance motor: converter and control, IEEE Trans. Ind. Appl., Vol. 36, No. 6, Nov./Dec. 2000, pp. 1351-1359.
156. Bae, H.K., Control of Switched Reluctance Motors Considering Mutual Inductance, Ph.D. thesis, The Bradley Department of Electrical and Computer Engineering, Virginia Tech., Blacksburg, VA, August 2000.
157. Jackson, T.W., Design and development of a low-cost controller for SRM drive, M.S. Thesis, The Bradley Department of Electrical and Computer Engineering, Virginia Tech., Blacksburg, VA, July 1996.
158. Bae, H.K. and R. Krishnan, A novel approach to control of switched reluctance motors considering mutual inductance, IEEE Ind. Electronics Conf., Oct. 2000, Nagoya, Japan, pp. 369-374.
159. Husain, I. and M. Ehsani, Torque ripple minimization in switched reluctance motor drives by PWM control, IEEE Trans. on Power Electronics, Vol. 11, No. 1, 1996, pp. 83-88.
160. Rim, Guen-hie., Variable speed constant frequency power conversion with permanent magnet synchronous and switched reluctance generators, Ph.D. Thesis, The Bradley Department of Electrical and Computer Engineering, Virginia Tech., Blacksburg, VA, February 1992.
161. Ray, W.F. and R.M. Davis, Inverter drive for doubly salient motors: its fundamental behavior, linear analysis and cost implications, IEE Proc. B. Electr. Power Appl., 2(6), 185-193, 1979.
162. Lawrenson, PJ. et al, Variable speed switched reluctance motors, IEE Proc. B, 127(4), 253-265, 1979.
163. Stephenson, J.M. and J. Corda, Computation of torque and current in doubly salient reluctance motors from non-linear magnetization data, IEE Proc., 126(5), 393-396, 1979.
164. Harris, M.R., A. Hughes, and PJ. Lawrenson, Static torque prediction in saturated doubly salient machines, IEE Proc., 122(10), 1121-1127, 1975.
165. Corda, M. and J.M. Stephenson, Analytical estimation of the minimum and maximum inductances of a double-salient motor, in Proc. of Int. Conf. on Stepping Motors and Systems, Sept. 1979, Leeds, pp. 50-59.
166. Davis, R.M., W.F. Ray, and R.J. Blake, Inverter drive for switched reluctance motor: circuits and component ratings, IEE Proc. B, 128(2), 126-136, 1981.
167. Finch, J.W., M.R. Harris, A. Musoke, and H.M.B. Metwally, Variable speed drives using multi-tooth per pole switched reluctance motors in Proc. 13th Ann. Symp. Incr. Mot. Contr. Syst. and Dev., May, 1984, pp. 293-301.
168. Krishnan, R., R. Arumugam, and J.F. Lindsay, Design procedure of switched reluctance motors, IEEE Trans. on Ind. Appl., IA-24(3), 456-461, 1988.
169. Arumugam, R., D.A. Lowther, R. Krishnan, and J.F. Lindsay, Magnetic field analysis of a switched reluctance motor using a two-dimensional finite-element model, IEEE Trans. on Magnetics, 21(5), 1883-1885, 1985.
170. Lindsay, J.F., R. Arumugam, and R. Krishnan, Finite-element analysis characterization of switched reluctance motor with multitooth per stator pole, IEE Proc. B, 133(6), 347-353, 1986.
171. Arumugam, R., J.F. Lindsay, and R. Krishnan, A comparison of the performance of two different types of switched reluctance motors, Electrical Machines and Power Systems, 12, 281-286, 1987.
172. Krishnan, R., A.S. Bharadwaj, and P.N. Materu, Computer aided design of electrical machines for variable speed applications, IEEE Trans. on Industrial Electronics, 36(4), 560-571, 1988.
173. Materu, P.N. and R. Krishnan, Steady state analysis of the variable speed switched reluctance motor drive, IEEE Trans. on Industrial Electronics, 36(4), 523-529, 1989.
174. Oza, A.R., R. Krishnan, and S. Adkar, A microprocessor control scheme for switched reluctance motor, in IEEE Ind. Electronics Conf., Nov. 1987, Boston, MA.
175. Mang, X., R. Krishnan, S. Adkar, and G. Chandramouli, Personal computer based controller for switched reluctance motor drives, in IEEE Ind. Electronics Conf., Nov. 1987, Boston, MA.
176. Materu, P.N. and R. Krishnan, Analytical prediction of SRM inductance profile and steady-state average torque, in Conf. Rec. IEEE IAS Ann. Mtg., Oct. 1990, Seattle, WA, pp. 214-223.
177. Krishnan, R., X. Mang, and A.S. Bharadwaj, Design and performance of a microcontroller-based switched reluctance motor drive system, Electrical Machines and Power Systems, 18(4), 359-373, 1990.
178. Krishnan, R., M. Abou-Zeid, and X. Mang, A design procedure for axial field switched reluctance motor, in Conf. Rec. IEEE IAS Ann. Mtg., Oct. 1990, Seattle, WA, pp. 241-246.
179. Krishnan, R., Switched reluctance motor drive applications, Motortechnics, 25-32, 1989.
180. Krishnan, R., X. Mang, and A.S. Bharadwaj, A low cost SRM analog controller, Motortechnics, 19-23, 1990.
181. Krishnan, R. and P.N. Materu, Measurement and instrumentation of a switched reluctance motor, in Conf. Rec. IEEE IAS Ann. Mtg., Oct. 1989, San Diego, CA, pp. 116-121.
182. Krishnan, R. and P.N. Materu, Analysis and design of a low cost converter for switched reluctance motor drives, in Conf. Rec. IEEE IAS Ann. Mtg., Oct. 1989, San Diego, CA, pp. 561-567.
183. Materu, P.N. and R. Krishnan, Estimation of switched reluctance motor losses, in Conf. Rec. IEEE IAS Ann. Mtg., Oct. 1988, Pittsburgh, PA, pp. 79-90.
184. Arumugam, R., J.F. Lindsay, and R. Krishnan, Sensitivity of pole arc/pole pitch ratio on switched reluctance motor performance, in Conf. Rec. IEEE IAS Ann. Mtg., Oct. 1988, Pittsburgh, PA, pp. 50-54.
185. Pollock, C. and B.W. Williams, Power converter circuits for switched reluctance motors with the minimum number of switches, IEE Proc. B, 137(6), 373-384, 1990.
186. Brauer, J.R., Simple equations for the magnetization and reluctivity curves of steel, IEEE Trans. on Magnetics, 11(1), 81, 1975.
187. El-Sherbiny, S.K., Representation of the magnetization characteristics by sum of exponentials, IEEE Trans. on Magnetics, 9(1), 60-61, 1973.
188. Trutt, F.C., E.A. Erdelyi, and R.E. Hopkins, Representation of magnetization characteristics of dc machines for computer use, Trans. on IEEE-PAS, 87, 665-669, 1968.
189. Krishnan, R. and S. Lee, Effect of power factor correction circuit on switched reluctance motor drives for appliances, in Conf. Proc. APEC '94, Feb. 1994, Orlando, FL, pp. 83-89.
190. Krishnan, R. and S. Lee, Analysis and design of a single switch per phase converter for switched reluctance motor drives, in Conf. Proc. PESC, 1994, pp. 485-492.
191. Krishnan, R. and S. Lee, Uninterruptible motor drives: A case study with switched reluctance motor drives, in Conf. Proc. IECON, 1994, 220-225.
192. Gharpure, V.S., R. Krishnan, and S. Lee, Analysis and design of energy recovery snubbers for switched reluctance motor drives, in Conf. Proc. IAS, 1994, pp. 1055-1062
193. Bedingfield, R.A., Development of CAE system for switched reluctance motor drive systems, M.S. Thesis, The Bradley Department of Electrical and Computer Engineering, Virginia Tech., Blacksburg, VA, July 1991.
194. Krishnan, R. and R.A. Bedingfield, Dynamic analysis of an SRM drive system, IEEE- IAS Annual Meeting, Conf. Record, Dearborn, MI, Oct 1991, pp. 265-271.
195. Krishnan, R., Electric Motor Drives: Modeling, Analysis and Control, Prentice-Hall, NJ, Feb. 2001.
196. Bae, H.K., Control of switched reluctance motors considering mutual inductance, Ph.D. Thesis, The Bradley Department of Electrical and Computer Engineering, Virginia Tech., Blacksburg, VA, Aug. 2000.
197. Alger, P.L., Induction Machines, Gordon & Breach, New York, 1970.
198. Yang, S.J., Low-Noise Electrical Motors, Clarendon Press, Oxford, 1981.
199. Yang, S.J. and A.J. Ellison, Machinery Noise Measurement, Clarendon Press, Oxford, 1985.
200. Belmans, R., K.J. Binns, W. Geysen, and A. Vandenput, Vibrations and Audible Noise in Alternating Current Machines, NATO ASI Series, Kluwer Academic, Dordrecht/Norwell, MA, 1988.
201. Timar, P.L., Noise and Vibrations of Electrical Machines, Elsevier, Amsterdam/New York, 1989.
202. Bonnet, A., L. Wittman, and J.G. Miller, Motor vibes: noise and vibration bibliographies and abstracts, in 1993 Pulp and Paper Ind. Tech Conf., Hyannis, MA, pp. 184-205, 1993.
203. Girgis, R.S. and S.P. Verma, Method for accurate determination of resonant frequencies and vibration behavior of stators of electrical machines, in IEEE Trans. on Electrical Power Apparatus B, 128(1), 1-11, 1981.
204. Verma, S.P. and R.S. Girgis, Experimental verification of resonant frequencies and vibration of stators of electrical machine. Part 1. Model, experimental procedure and apparatus, in IEEE Trans. on Electrical Power Apparatus B, 128(1), 12-21, 1981.
205. Verma, S.P. and R.S. Girgis, Experimental verification of resonant frequencies and vibration of stators of electrical machines. Part 2. Experimental investigations and results, in IEEE Trans. on Electrical Power Apparatus B, 128(1), 22-32, 1981.
206. Verma, S.P., K. Williams, and R.K. Singal, Vibrations of long and short laminated stators of electrical machines. Part I. Theory, experimental models, procedure and set-up, J. Sound Vibration, 129, 1-13, 1989.
207. Williams, K., R.K. Singal, and S.P. Verma, Vibrations of long and short laminated stators of electrical machines. Part II. Results for long stators, J. Sound Vibration, 129, 15-29, 1989.
208. Singal, R.K., S.P. Verma, and K. Williams, Vibrations of long and short laminated stators of electrical machines. Part II. Results for short stators and validity of simplified frequency equations, J. Sound Vibration, 129, 31-44, 1989.
209. Singal, R.K., K. Williams, and S.P. Verma, The effect of windings, frame and impregnation upon the resonant frequencies and vibrational behavior of an electrical machine stator, in Experimental Mechanics, 30, 270-280, 1990.
210. Colby, R.S., F.M. Mottier, and T.J.E. Miller, Vibration modes and acoustic noise in a four-phase switched reluctance motor, in IEEE Trans. on Ind. Appl., 32(6), 1357-1364, 1996.
211. Yongxiao, C., W. Jianhua, and H. Jun, Analytical calculation of natural frequencies of stator of switched reluctance motor, in 8th Int. Conf. on Electrical Machines and Drives, Conf. Publ. No. 444, pp. 81-85, 1997.
212. Yang, S.J., Effects of voltage/current harmonics on noise emission from induction motors, in Vibrations and Audible Noise in Alternating Current Machines, R. Belmans, K.J. Binns, W. Geysen, and A. Vandenput, Eds., Kluwer Academic, Dordrecht/Norwell, MA, 1988, pp. 457-468.
213. Belmans, R.J.M., L. D'Hondt, A. Vandenput, and W. Geysen, Analysis of the audible noise of three phase squirrel cage induction motors supplied by inverters, IEEE Trans. on Ind. Appl., 23, 842-947, 1987.
214. Belmans, R.J.M., D. Verdyck, W. Geysen, and R.D. Findlay, Electro-mechanical analysis of the audible noise of an inverter-fed squirrel-cage induction motor, IEEE Trans. on Ind. Appl., 27(3), 539-544, 1991.
215. Wu, C.Y. and C. Pollock, Analysis and reduction of vibration and acoustic noise in the switched reluctance drive, Conf. Record, IEEE IAS Ann. Mtg., 93CH3366-2, 1993, pp. 106-113.
216. Nau, S.L., The influence of the skewed rotor slots on the magnetic noise of three- phase induction motors, in 8th Int. Conf. on Electrical Machines and Drives, Conf. Publ. No. 444, 1997, pp. 396-399.
217. Cameron, D.E., J.H. Lang, and S.D. Umans, The origin and reduction of acoustic noise in doubly salient variable-reluctance motors, in IEEE Trans. on Ind. Appl., 28(6), 1250-1255, 1992.
218. Trzynadlowski, A.M., F. Blaabjerg, J.K. Pedersen, R.L. Kirlin, and S. Legowski, Random pulse width modulation techniques for converter fed drive systems-A Review, Conf. Record, IEEE IAS Ann. Mtg., 93CH3366-2, 1993, pp. 1136-1143.
219. Blaabjerg, F. and J.K. Pedersen, Digital implemented random modulation strategies for ac and switched reluctance drives, in Proc. of IECON '93, 93CH3234-2, 1993, pp. 676- 682.
220. Blaabjerg, F., J.K. Pedersen, P. Nielsen, L. Andersen, and PC. Kjaer, Investigation and reduction of acoustical noise from switched reluctance drives in current and voltage control, in Proc. of Int. Conf. on Electrical Machines, 1994, pp. 589-594.
221. Stemmler, H. and T. Eilinger, Spectral analysis of the sinusoidal PWM with variable switching frequency for noise reduction in inverter-fed induction motors, in Proc. 1994 Power Electronics Specialist Conf.-PESC '94, Vol. 1, Taipei, Taiwan, 1994, pp. 269-277.
222. Michaelides, A. and C. Pollock, Reduction of noise and vibrations in switched reluctance motors: new aspects, in Proc. IEEE IAS Ann. Mtg., 96CH25977, 1996, pp. 771-778.
223. Belkhayat, D., D. Roger, and J.F. Brudny, Active reduction of magnetic noise in asynchronous machine controlled by stator current harmonics, in 8th Int. Conf. on Electrical Machines and Drives, Conf. Publ. No. 444, 1997, pp. 400-405.
224. Krishnan, R. and P. Vijayraghavan, State of the art: acoustic noise in switched reluctance motor drives, in Proc. of IECON '98, Aachen, Germany, 1998, pp. 929-934.
225. International Organization for Standardization, ISO R1680-1970: test code for the measurement of the airborne noise emitted by rotating electrical machinery, in ISO Standards Handbook. 4. Acoustics, Vibration, and Shock, 1985, pp. 150-166.
226. International Organization for Standardization, ISO 2372-1974: mechanical vibration of machines with operating speeds from 10 to 200 rev/s-basis for specifying evaluation standards, in ISO Standards Handbook. 4. Acoustics, Vibration, and Shock, 1985, pp. 560-568.
227. International Organization for Standardization, ISO 3945-1977: mechanical vibration of large rotating machines with speed range from 10 to 200 rev/s-measurement and evaluation of the vibration severity in situ, in ISO Standards Handbook. 4. Acoustics, Vibration, and Shock, 1985, pp. 580-585.
228. Stuhler, W. and A. El-Kafrawy, Measurements of vibrations for electrical machines, in Vibrations and Audible Noise in Alternating Current Machines, R. Belmans, K.J. Binns, W. Geysen, and A. Vandenput, Eds., Kluwer Academic, Dordrecht/Norwell, MA, 1988, pp. 425-446.
229. Lisner, R. and L. Timar, A new approach to electric motor acoustic noise standards and test procedures, in IEEE Int. Electric Machines and Drives Conf. Rec., Milwaukee, WI, pp. 61-63, 1997.
230. Craggs, J.L., Measuring the noise level of loaded electric motors, in Rec. of 1991 Ann. Pulp and Paper Ind. Tech. Conf., Montreal, Canada, pp. 239-245.
231. Craggs, J.L., Specifying and measuring the noise level of electric motors in operation, in Rec. IAS 38th Ann. Petroleum and Chemical Ind. Conf., 1991, Toronto, Canada, pp. 79-83.
232. Pulle, D.W.J., J.C.S. Lai, J.F. Milthorpe, and N. Huynh, Quantification and analysis of acoustic noise in switched reluctance drives, in Fifth European Conf. on Power Electronics and Applications, Conf. Publ. No. 377, 1993, Brighton, UK, pp. 65-70.
233. Tang, Y., Characterization, numerical analysis, and design of switched reluctance motors, IEEE Trans. on Ind. Appl., 33(6), 1544-1552, 1997.
234. Vijayraghavan, P. and R. Krishnan, Noise in electric machines: a review, IEEE Trans. on Ind. Appl., Vol. 35, No. 5, pp. 1007-1013, Sept. Oct., 1999.
235. Panda, D. and V. Ramnarayanan, Low-noise switched reluctance drive, in Int. Conf. on Power Electronics, Drives, and Energy Systems (PEDES '98) for Industrial Growth, Dec. 1-3, 1998, Perth, Australia, pp. 627-633.
236. Kim, K.-B., Field analysis of low acoustic noise switched reluctance motor, IEEE Trans. on Magnetics, 33(2), pp. 2026-2029, 1997.
237. Acarnley, P.P., B.J. Hill, and C.W. Hooper, Detection of rotor position in stepping and switched motors by monitoring of current waveforms, IEEE Trans. on Industrial Electronics, 32(3), 215-222, 1985.
238. Panda, S.K. and G.A.J. Amaratunga, Waveform detection technique for indirect rotor position sensing of switched reluctance motor drives. Part 1. Analysis, IEE Proc. B, 140(1), 80-88, 1993.
239. Panda, S.K. and G.A.J. Amaratunga, Waveform detection technique for indirect rotor position sensing of switched reluctance motor drives. Part 2. Experimental results, IEE Proc. B, 140(1), 89-96, 1993.
240. Harris, W.D. and J.H. Lang, Simple motion estimator for VR motors, Conf. Rec. IEEE Ind. Appl. Soc., Oct., 387-393, 1988.
241. Brosse, A., G. Henneberger, M. Schniedermeyer, R.D. Lorenz, and N. Nagel, Sen- sorless control of a SRM at low speeds and standstill based on signal power evaluation, Conf. Rec. IEEE Ind. Appl. Soc., Oct., 1538-1543, 1998.
242. Kirchhoff, F. and R. Hanitsch, A sensorless SRM drive without A/D and D/A converters, Conf. Rec. Int. Conf. on Electrical Machines, 3, 314-317, 1994.
243. Mvungi, N.H., M.A. Lahoud, and J.M. Stephenson, A new sensorless position detector for SR drives, in Proc. of IEE 4th Int. Conf. on Power Electronics and Variable Speed Drives, 1990, pp. 249-252.
244. Mvungi, N.H. and J.M. Stephenson, Accurate sensorless rotor position detection in an SR motor, Proc. Eur. Power Electronics Conf., 390-393, 1991.
245. Laurent, P., M. Gabsi, and B. Multon, Sensorless rotor position analysis using resonant method for switched reluctance motor, Conf. Rec. IEEE Ind. Appl. Soc., Oct., 687-694, 1993.
246. Egan, M.G., M.B. Harrington, and J.M.D. Murphy, PWM-based position sensorless control of variable reluctance motor drives, Proc. Eur. Power Electronics Conf., 4, 024-029, 1991.
247. Ehsani, M. and I. Husain, Rotor position sensing in switched reluctance motor drives by measuring mutually induced voltages, Conf. Rec. IEEE Ind. Appl. Soc., Oct., 422-429, 1992.
248. Gallegos-Lopez, G., P.C. Kjaer, and T.J.E. Miller, A new sensorless method for switched reluctance motor drives, IEEE Trans. on Ind. Appl., 34(4), 832-840, 1998.
249. Ray, W.F. and I.H. Al-Bahadly, A sensorless method for determining rotor position for switched reluctance motors, in Proc. of IEE Power Electronics and Variable Speed Drives Conf., Conf. Publ. No. 399, Oct. 1994, pp. 26-28.
250. Bu, J. and L. Xu, Eliminating starting hesitation for reliable sensorless control of switched reluctance motors, Conf. Rec. IEEE Ind. Appl. Soc., Oct., 693-700, 1998.
251. Lumsdaine, A. and J.H. Lang, State observers for variable-reluctance motors, IEEE Trans. on Industrial Electronics, 37(2), 133-142, 1990.
252. Gentili, F. and S. Nicosia, Observer based control system design for switched reluctance motors, in Proc. of the 34th Conf. on Decision and Control, Dec. 1995, pp. 115-120.
253. Elmas, C. and H. Zelaya-De La Parra, Application of a full-order extended Luen- berger observer for a position sensorless operation of switched reluctance motor drive, IEEE Proc. on Control Theory Appl., 143(5), 401-408, 1996.
254. Zhan, Y.J., C.C. Chan, and K.T. Chau, A novel position and velocity observer for robust control of switched reluctance motors, Conf. Rec. IEEE Ind. Appl. Soc., Oct., 1998.
255. Brosse, A. and H. Henneberger, Sensorless control of a switched reluctance motor using a Kalman filter, in Proc. of the European Power Electronics Conf., 1997, Trondheim, pp. 4561-4566.
256. Bellini, A., F. Filippetti, G. Franceschini, C. Tassoni, and P. Vas, Position sensorless control of a SRM drive using ANN-techniques, Conf. Rec. IEEE Ind. Appl. Soc., Oct., 709-714, 1998.
257. Mese, E. and D.A. Torrey, Sensorless position estimation for variable-reluctance machines using artificial neural networks, Conf. Rec. IEEE Ind. Appl. Soc., Oct., 540-547, 1997.
258. Xu, L. and J. Bu, Position transducerless control of a switched reluctance motor using minimum magnetizing input, Conf. Rec. IEEE Ind. Appl. Soc., Oct., 533-539, 1997.
259. Cheok, A. and N. Ertugrul, A model free fuzzy logic based rotor position sensorless switched reluctance motor drive, Conf. Rec. IEEE Ind. Appl. Soc., Oct., 76-83, 1996.
260. Panda, D. and V. Ramanarayanan, Fuzzy logic based control of a switched reluctance motor, in Proc. of the Canadian Conf. on Electrical and Computer Engineering, 1998.
261. Liou, S.P. and W. Wang, Indirect rotor position sensing for switched reluctance motor using search coil, in Proc. of the Canadian Conf. on Electrical and Computer Engineering, 1996, pp. 938-942.
262. Richardson, K.M., C. Pollock, and J.O. Flower, Design and performance of a rotor position sensing system for a switched reluctance machine propulsion unit, Conf. Rec. IEEE Ind. Appl. Soc., Oct., 168-173, 1996.
263. Lyons, J.P., S.R. MacMinn, and M.A. Preston, Flux/current methods for SRM rotor position estimation, Conf. Rec. IEEE Ind. Appl. Soc., Oct., 482-487, 1991.
264. MacMinn, S.R., P.M. Szczesny, W.J. Rzesos, and T.M. Jahns, Application of sensor integration techniques to switched reluctance motor drives, Conf. Rec. IEEE Ind. Appl. Soc., Oct., 584-588, 1988.
265. Ray, W.F. and I.H. Al-Bahadly, Sensorless methods for determining the rotor position of switched reluctance motors, in Proc. of the European Power Electronics Conf., 1993, Brighton, U.K., pp. 7-13.
266. Kawamura, A., Survey of position sensorless switched reluctance motor control, Conf. Rec. IEEE Conf. on Ind. Electronics, Nov., 1595-1598, 1994.
267. Husain, I., Indirect rotor position estimation techniques for switched reluctance motors: a review, Electromotion, 94-102, 1996.
268. Rehman, S.U. and D.G. Taylor, Issues in position estimation of SR motors, Conf. Rec. Power Electronics Specialist Conf., 337-343, 1996.
269. Krishnan, R. and P. Materu, Measurement and instrumentation of a switched reluctance motor, Conf. Rec. IEEE Ind. Appl. Soc. Ann. Mtg., Oct., 116-121, 1989.
270. Lloyd, J., SR drive applications, in Tutorial Course on Switched Reluctance Motor Drives, organized by R. Krishnan, Conf. Rec. IEEE Ind. Appl. Soc. Ann. Mtg., Oct., 210-245, 1996.
271. Krishnan, R. and A.S. Bharadwaj, A comparative study of various motor drive systems for aircraft applications, Conf. Rec. IEEE Ind. Appl. Soc. Ann. Mtg., Oct., 252-258, 1991.
272. Radun, A.V., High power density switched reluctance motor drive for aerospace Applications, IEEE Trans. on Ind. Appl., 113-119, 1992.
273. Ferreira, C.A., S.R. Jones, B.T. Drager, and W.S. Heglund, Design and implementation of a five horsepower, switched reluctance fuel-lube, pump motor drive for a gas turbine engine, Conf. Rec. IEEE Appl. Power Electronic Conf., 56-62, 1994.
274. Richardson, K.M., C. Pollock, and J.O. Fowler, Design and performance of a rotor position sensing system for a switched reluctance marine propulsion unit, Conf. Rec. IEEE Ind. Appl. Soc. Ann. Mtg., Oct., 168-173, 1996.
275. Mauch, K. and F. Peabody, A compact thruster for industrial submarines, Conf. Rec. IEEE Ind. Appl. Soc. Ann. Mtg., Oct. 242-247, 1985.
276. Lee, B.S., H.K. Bae, P. Vijayraghavan, and R. Krishnan, Design of a linear switched reluctance machine, Conf. Rec. IEEE Ind. Appl. Soc. Ann. Mtg., Oct. 2267-2274, 1999.
277. Bae, H.K., B.S. Lee, P. Vijayraghavan, and R. Krishnan, A linear switched reluctance motor: converter and control, Conf. Rec. IEEE Ind. Appl. Soc. Ann. Mtg., Oct., 547-554, 1999.