Noise in electric machines: A review

IEEE Transactions on Industry Applications

Volumn 35, Issue 5, 1999, Pages 1007-1013

  Vijayraghavan, Praveen ^a   Krishnan, R ^a  

^a State University   (United States)

Author keywords

Acoustic noise; Induction machines; Noise; Switched reluctance machines; Vibrations

Indexed keywords

ACOUSTIC NOISE IDENTIFICATION; ACOUSTIC NOISE MITIGATION METHODS; SWITCHED RELUCTANCE MACHINES;

ACOUSTIC NOISE; MACHINE VIBRATIONS; STANDARDS;

ASYNCHRONOUS MACHINERY;

EID: 0033184442     PISSN: 00939994     EISSN: None     Source Type: Journal    
DOI: 10.1109/28.793360     Document Type: Article

References (47)

1. D. E. Cameron, J. H. Lang, and S. D. Umans, The origin of acoustic noise in variable-reluctance motors," in Conf. Rec. IEEE-IAS Annu. Meeting, San Diego, CA, Oct. 1989, pp. 108-115
2. R. S. Colby, F. M. Mottier, and T. J. E. Miller, Vibration modes and acoustic noise in a four-phase switched reluctance motor," IEEE Trans. Ind. Applicat., vol. 32, pp. 1357-1364, Nov./Dec. 1996.
3. A. Bonnet, L. Wittman, and J. G. Miller, Motor vibes: Noise and vibration bibliographies and abstracts," in Proc. 1993 Pulp and Paper Industry Tech. Conf., Hyannis, MA, 1993, pp. 184-205.
4. S. J. Yang, Low-Noise Electrical Motors. Oxford, U.K.: Clarendon, 1981.
5. P. L. Timar, Noise and Vibrations of Electrical Machines. Amsterdam, The Netherlands: Else vier, 1989.
6. P. L. Alger, Induction Machines. New York: Gordon and Breach, 1970.
7. H. Jordan, Gerä uscharme Elektromotoren. Essen, W. Germany: W. Giradet, Essen, 1950.
8. H. Jordan and H. Frohne, Ermittlung der Eigenfrequenzen des Ständers von Drehstrommotoren," La rmbekä mpfung, no. 7, pp. 137-140, 1957.
9. Z. Uner and H. Jordan, Berechnung der Eigenfrequenzen der Blechpakete von Drehstrommaschien," Konstruktion, no. 16, pp. 108-111, 1964.
10. R. S. Girgis and S. P. Verma, Method for accurate determination of resonant frequencies and vibration behavior of stators of electrical machines," Proc. Inst. Elect. Eng.-Elect. Power Applicat., vol. 128, pt. B, no. 1, pp. 1-11, Jan. 1981.
11. S. P. Verma and R. S. Girgis, Experimental verification of resonant frequencies and vibration of stators of electrical machines, Part 1: Model, experimental procedure and apparatus," Proc. Inst. Elect. Eng.-Elect. Power Applicat., vol. 128, pt. B, no. 1, pp. 12-21, Jan. 1981.
12. _, Experimental verification of resonant frequencies and vibration of stators of electrical machines, Part 2: Experimental investigations and results," Proc. Inst. Elect. Eng.-Elect. Power Applicat., vol. 128, pt. B, no. 1, pp. 22-32, Jan. 1981.
13. S. P. Verma, K. Williams, and R. K. Singal, Vibrations of long and short laminated stators of electrical machines, Part I: Theory, experimental models, procedure, and set-up," J. Sound Vibration, no. 129, pp. 1-13, 1989.
14. K. Williams, R. K. Singal, and S. P. Verma, Vibrations of long and short laminated stators of electrical machines, Part II: Results for long stators," J. Sound Vibration, no. 129, pp. 15-29, 1989.
15. R. K. Singal, S. P. Verma, and K. Williams, Vibrations of long and short laminated stators of electrical machines, Part III: Results for short stators and validity of simplified frequency equations," J. Sound Vibration, no. 129, pp. 31-444, 1989.
16. R. K. Singal, K. Williams, and S. P. Verma, The effect of windings, frame, and impregnation upon the resonant frequencies and vibrational behavior of an electrical machine stator," Exp. Mech., no. 30, pp. 270-280, 1990.
17. D.-H. Cho and K.-J. Kim, Modeling of electromagnetic excitation forces of small induction motor for vibration and noise analysis," Proc. Inst. Elect. Eng.-Elect. Power Applicat.. vol. 145, no. 3, pp. 199-205, May 1998.
18. R. Krishnan, Switched reluctance motor drives," Class Notes, EE6444-Control of Switched Reluctance Motors, Virginia Polytech. Inst. State Univ., Blacksburg, Fall 1995.
19. C. Yongxiao, W. Jianhua, and H. Jun, Analytical calculation of natural frequencies of stator of switched reluctance motor," in Conf. Rec. 8th Int. Conf. Electrical Machines and Drives. 1997, pp. 81-85.
20. D. G. Dorrell, W. T. Thomson, and S. Roach, Analysis of airgap flux, current, and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors," IEEE Trans. Ind. Applicat.. vol. 33, pp. 24-34, Jan./Feb. 1997.
21. S. J. Yang, Effects of voltage/current harmonics on noise emission from induction motors," in Vibrations and Audible Noise in Alternating Current Machines, R. Belmans, K. J. Binns, W. Geysen, and A. Vandenput, Eds. Dordrecht, The Netherlands: Kluwer, 1988, pp. 457-468.
22. R. J. M. Belmans, L. D'Hondt, A. Vandenput, and W. Geysen, Analysis of the audible noise of three phase squirrel cage induction motors supplied by inverters," IEEE Trans. Ind. Applicat.. vol. 23, pp. 842-947, Sept./Oct. 1987.
23. R. J. M. Belmans, D. Verdyck, W. Geysen, and R. D. Findlay, Electromechanical analysis of the audible noise of an inverter-fed squirrel-cage induction motor," IEEE Trans. Ind. Applicat., vol. 27, pp. 539-544, May/June 1991.
24. C. Y. Wu and C. Pollock, Analysis and reduction of vibration and acoustic noise in the switched reluctance drive," in Conf. Rec. IEEE-IAS Anna. Meeting, 1993, pp. 106-113.
25. S. L. Nau, The influence of the skewed rotor slots on the magnetic noise of three-phase induction motors," in Proc. 8th Int. Conf. Electrical Machines and Drives. 1997, pp. 396-399.
26. A. M. Trzynadlowski, F. Blaabjerg, J. K. Pedersen, R. L. Kirlin, and S. Legowski, Random pulse width modulation techniques for converter fed drive systems-A review," in Conf. Rec. IEEE-IAS Anna. Meeting, 1993, pp. 1136-1143.
27. D. E. Cameron, J. H. Lang, and S. D. Umans, The origin and reduction of acoustic noise in doubly salient variable-Reluctance motors," IEEE Trans. Ind. Applicat., vol. 28, pp. 1250-1255, Nov./Dec. 1992.
28. F. Blaabjerg and J. K. Pedersen, Digital implemented random modulation strategies for AC and switched reluctance drives," in Proc. IECON'93. 1993, pp. 676-682.
29. F. Blaabjerg, J. K. Pedersen, P. Nielsen, L. Andersen, and P. C. Kjaer, Investigation and reduction of acoustical noise from switched reluctance drives in current and voltage control," in Proc. Int. Conf. Electrical Machines. 1994, pp. 589-594.
30. H. Stemmler and T. Eilinger, Spectral analysis of the sinusoidal PWM with variable switching frequency for noise reduction in inverter-fed induction motors," in Proc. PESC'94. Taipei, Taiwan, R.O.C., 1994, vol. 1, pp. 269-77.
31. R. Barro and H. Ping, Torque ripple compensation of vector controlled induction machines," in Proc. PESC'97, St. Louis, MO, 1997, pp. 1281-1287.
32. N. Inane, A. Derdiyok, and V. Ozbulur, Torque ripple minimization of a switched reluctance motor including mutual inductances via sliding mode control technique," in Proc. ISIE'97, Guimaraes, Portugal, 1997, pp. 1024-1028.
33. K. Russa, I. Husain, and M. Elbuluk, Torque ripple minimization in switched reluctance machines over a wide speed range," in Conf. Rec. IEEE-IAS Anna. Meeting, 1997, pp. 668-675.
34. D. Belkhayat, D. Roger, and J. F. Brudny, Active reduction of magnetic noise in asynchronous machine controlled by stator current harmonics," in Proc. 8th Int. Conf. Electrical Machines and Drives, 1997, pp. 400-405.
35. A. Michaelides and C. Pollock, Reduction of noise and vibrations in switched reluctance motors: New aspects," in Conf. Rec. IEEE-IAS Anna. Meeting, 1996, pp. 771-778.
36. R. Krishnan and P. Vijayraghavan, State of the art: Acoustic noise in switched reluctance motor drives," in Proc. IECON'98, Aachen, Germany, 1998, pp. 929-934.
37. Mechanical Vibration of Machines with Operating Speeds from 10-200 rev/s-Basis for Specifying Evaluation Standards, ISO 2372-1974.
38. Mechanical Vibration of Certain Rotating Electrical Machinery with Shaft Heights Between 80-400 mm-Measurement and Evaluation of the Vibration Severity, ISO 2373-1974.
39. Mechanical Vibration of Large Rotating Machines with Speed Range from 10-200 rev/s-Measurement and Evaluation of the Vibration Severity in situ," ISO 3945-1977.
40. R. Belmans, K. J. Binns, W. Geysen, and A. Vandenput, Eds., Vibrations and Audible Noise in Alternating Current Machines. Dordrecht, The Netherlands: Kluwer, 1988.
41. W. Stuhler and A. El-Kafrawy, Measurements of vibrations for electrical machines," in Vibrations and Audible Noise in Alternating Current Machines, R. Belmans, K. J. Binns, W. Geysen, and A. Vandenput, Eds. Dordrecht, The Netherlands: Kluwer, 1988, pp. 425-446.
42. Test Code for the Measurement of the Airborne Noise Emitted by Rotating Electrical Machinery, ISO/R 1680-1970.
43. R. Lisner and L. Timar, A new approach to electric motor acoustic noise standards and test procedures," in Conf. Rec. 1997 IEEE Int. Electric Machines Drives Conf., Milwaukee, WI, 1997, pp. WC1/6.1-3.
44. J. L. Craggs, Measuring the noise level of loaded electric motors," in Conf. Rec. Annu. Pulp and Paper Industry Tech. Conf., Montreal, PQ, Canada, 1991, pp. 239-245.
45. _, Specifying and measuring the noise level of electric motors in operation," in Conf. Rec. IEEE-IAS 38th Annu. Petroleum and Chemical Industry Conf., Toronto, Ont., Canada, 1991, pp. 79-83.
46. S. J. Yang and A. J. Ellison, Machinery Noise Measurement. Oxford, U.K.: Clarendon, 1985.
47. P. O. Rasmussen, F. Blaabjerg, and T. J. E. Miller, Acoustic noise simulation for switched reluctance motors with audible output," unpublished.