Advanced modeling of diesel particulate filters to predict soot accumulation and pressure drop

SAE Technical Papers

Volumn , Issue , 2011, Pages

  Cozzolini, Alessandro ^a   Mulone, Vincenzo ^b   Abeyratne, Prabash ^a   Littera, Daniele ^a   Gautam, Mridul ^a  

^a WEST VIRGINIA UNIVERSITY   (United States)

^b UNIVERSITY OF ROME TOR VERGATA   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

AIR FILTERS; BANDPASS FILTERS; DIESEL ENGINES; DROPS; EFFICIENCY; FUEL FILTERS; PARTICLE SIZE; PARTICLE SIZE ANALYSIS; PRESSURE DROP; SYSTEMS ENGINEERING;

AFTERTREATMENT SYSTEMS; DIESEL PARTICULATE FILTERS; EFFICIENT TECHNOLOGY; FILTRATION EFFICIENCY; HEAVY-DUTY DIESEL ENGINE; IN-DEPTH UNDERSTANDING; REGENERATION MECHANISMS; REMOVAL EFFICIENCIES;

SOOT;

EID: 85043069144     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2011-24-0187     Document Type: Conference Paper

References (30)

1. Johnson, T., "Diesel Emission Control in Review," SAE Int. J. Fuels Lubr. 2 (1): 1-12, 2009, doi: 10.4271/2009-01-0121.
2. "Summary of Worldwide Diesel Emission Standards" Revision 2009, http://www.dieselnet.com/standards.
3. Ardanese, M., Ardanese, R., Besch, M., Adams, T., et al., "Emissions of NOx, NH3 and Fuel Consumption Using High and Low Engine-Out NOx Calibrations to Meet 2010 Heavy Duty Diesel Engine Emission Standards," SAE Technical Paper 2009-01-0909, 2009, doi: 10.4271/2009-01-0909.
4. Rice, M., Kramer, J., Mueller, R., and Mueller-Haas, K., "Development of an Integrated NOx and PM Reduction Aftertreatment System: SCRi™ for Advanced Diesel Engines," SAE Technical Paper 2008-01-1321, 2008, doi: 10.4271/2008-01-1321.
5. Rose, D., and Boger, T., "Different Approaches to Soot Estimation as Key Requirement for DPF Applications," SAE Technical Paper 2009-01-1262, 2009, doi: 10.4271/2009-01-1262.
6. Premchand, K., Johnson, J., Yang, S., Triana, A., et al., "A Study of the Filtration and Oxidation Characteristics of a Diesel Oxidation Catalyst and a Catalyzed Particulate Filter," SAE Technical Paper 2007-01-1123, 2007, doi: 10.4271/2007-01-1123.
7. th CRC On-Road Vehicle Emissions Workshop, San Diego, CA, March 22-24, 2010.
8. Bissett, E.J., "Mathematical Model of the Thermal Regeneration of a Wall-Flow Monolith Diesel Particulate Filter" Chemical Engineering Science Vol. 39, n. 7/8, pp. 1233-1244, 1984.
9. Konstandopoulos, A., and Kostoglou, M., "Computationally Fast Implementations of Convection, Diffusion and Chemical Reaction Phenomena in Diesel Particulate Filters," SAE Technical Paper 2010-01-0890, 2010, doi: 10.4271/2010-01-0890.
10. Konstandopoulos, A., Kostoglou, M., Skaperdas, E., Papaioannou, E., et al., "Fundamental Studies of Diesel Particulate Filters: Transient Loading, Regeneration and Aging," SAE Technical Paper 2000-01-1016, 2000, doi: 10.4271/2000-01-1016.
11. Mulone, V., Cozzolini, A., Abeyratne, P., Littera, D., Thiagaraian, M., Besch, M., and Gautam, M., "Soot Modeling for Advanced Control of Diesel Engine Aftertreatment" ICEF2010-35160, in press
12. Mulone, V., Cozzolini, A., Abeyratne, P., Littera, D., Thiagaraian, M., Besch, M. and Gautam, M., "Soot Modeling for Advanced Control of Diesel Engine Aftertreatment", Journal of Engineering for Gas Turbine Engine and Power, 2011: 133(12), Article number 122804
13. Mohammed, H., Triana, A., Yang, S., and Johnson, J., "An Advanced 1D 2-Layer Catalyzed Diesel Particulate Filter Model to Simulate: Filtration by the Wall and Particulate Cake, Oxidation in the Wall and Particulate Cake by NO2 and O2, and Regeneration by Heat Addition," SAE Technical Paper 2006-01-0467, 2006, doi: 10.4271/2006-01-0467.
14. Bissett, E.J., and Shadman, F., Thermal Regeneration of Diesel Particulate Monolithic Filters. A.I.Ch.E. Journal, Vol. 39, 753-758, 1985.
15. Kandylas, I.P., Haralampous, O.A., and Koltsakis, G.C., "Diesel Soot Oxidation with NO2 Engine Experiments and Simulations," Industrial Engineering and Chemistry Research, Vol. 41, 5372-5384, 2002
16. Kandylas, I.P., and Koltsakis, G.C., "NO2 Assisted Regeneration of Diesel Particulate Filters: A Modeling Study," Industrial Engineering and Chemistry Research, Vol. 41, 2115-2123, 2002
17. Triana, A.P., "Development of Models to Study the Emissions, Flow and Kinetic Characteristics from a Diesel Oxidation Catalyst and Particulate Filter" PhD Thesis, Michigan Technological University, 2005
18. Kandylas, I.P., and Koltsakis, G.C., "Simulation of Continuously Regenerating Diesel Particle Filters in Transient Driving Cycles," Proc,Inst.Mech.Eng.Part D J.Automob. Eng., Vol 216, 591-606, 2002
19. Allansson, R., Blakeman, P., Cooper, B., Hess, H., et al., "Optimising the Low Temperature Performance and Regeneration Efficiency of the Continuously Regenerating Diesel Particulate Filter (CR-DPF) System," SAE Technical Paper 2002-01-0428, 2002, doi: 10.4271/2002-01-0428.
20. Setiabudi, A., Makkee, M., and Moulijn, J.A., "An Optimal NOx Assisted Abatement of Diesel Soot in an Advance Catalytic Filter Design" Applied Catalysis B:Environmental, 42-35, 2003
21. Konstandopoulos, A., and Kostoglou, M., "Periodically Reversed Flow Regeneration of Diesel Particulate Traps," SAE Technical Paper 1999-01-0469, 1999, doi: 10.4271/1999-01-0469.
22. Konstandopoulos, A.G., and Kostoglou, M., "Reciprocating Flow Regeneration of Soot Filters," Combustion and Flame, Vol. 121, 488-500, 2000
23. Cooper, B., and Thoss, J., "Role of NO in Diesel Particulate Emission Control," SAE Technical Paper 890404, 1989, doi: 10.4271/890404.
24. Triana, A., Johnson, J., Yang, S., and Baumgard, K., "An Experimental and Numerical Study of the Performance Characteristics of the Diesel Oxidation Catalyst in a Continuously Regenerating Particulate Filter," SAE Technical Paper 2003-01-3176, 2003, doi: 10.4271/2003-01-3176.
25. Konstandopoulos, A., and Johnson, J., "Wall-Flow Diesel Particulate Filters-Their Pressure Drop and Collection Efficiency," SAE Technical Paper 890405, 1989, doi: 10.4271/890405.
26. Lee, K.W., and Gieseke, J.A., "Collection of Aerosol Particles by Packed Beds," Environmental Science Technology, Vol. 13, 1761, 1978
27. Kladopoulou, E., Yang, S., Johnson, J., Parker, G., et al., "A Study Describing the Performance of Diesel Particulate Filters During Loading and Regeneration-A Lumped Parameter Model for Control Applications," SAE Technical Paper 2003-01-0842, 2003, doi: 10.4271/2003-01-0842.
28. Bejan, A., "Convection Heat Transfer," Third Edition, John Wiley & Sons,Inc, New Jersey, 2004
29. Koltsakis, G., Dardiotis, C., Samaras, Z., Maunula, T., et al., "Optimization Methodologies for DPF Substrate-Catalyst Combinations," SAE Technical Paper 2009-01-0291, 2009, doi: 10.4271/2009-01-0291.
30. Mulone, V., Cozzolini, A., Abeyratne, P., Besch, M., et al., "Exhaust: DPF Model for Real-time Applications," SAE Technical Paper 2011-24-0183, 2011, doi: 10.4271/2011-24-0183.