Empirical mode decomposition analysis for broken-bar detection on squirrel cage induction motors

IEEE Transactions on Instrumentation and Measurement

Volumn 64, Issue 5, 2015, Pages 1118-1128

  Valles Novo, Ricardo ^a   De Jesus Rangel Magdaleno, Jose ^a   Ramirez Cortes, Juan Manuel ^a   Peregrina Barreto, Hayde ^a   Morales Caporal, Roberto ^b  

^a INSTITUTO NACIONAL DE ASTROFÍSICA   (Mexico)

^b Institute Tecnólogico de Apizaco   (Mexico)

Author keywords

Broken bar; empirical mode decomposition (EMD); motor current signature analysis (MCSA); squirrel cage motor.

Indexed keywords

INDUCTION MOTORS; RELIABILITY ANALYSIS; SIGNAL PROCESSING; SQUIRREL CAGE MOTORS;

BROKEN BAR; CLASSIFICATION CRITERION; CLASSIFICATION FEATURES; EMPIRICAL MODE DECOMPOSITION; INTRINSIC MODE FUNCTIONS; MOTOR CURRENT SIGNATURE ANALYSIS; SIGNAL PROCESSING TECHNIQUE; SQUIRREL CAGE INDUCTION MOTOR;

ROTORS (WINDINGS);

EID: 85027949642     PISSN: 00189456     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIM.2014.2373513     Document Type: Article

References (28)

1. J. Rangel-Magdaleno, J. Ramirez-Cortes, and H. Peregrina-Barreto, "Broken bars detection on induction motor using MCSA and mathematical morphology: An experimental study, " in Proc. IEEE Int. Instrum. Meas. Technol. Conf. (I2MTC), May 2013, pp. 825-829.
2. B. Xu, S. Liu, and L. Sun, "A novel method for the early detection of broken rotor bars in squirrel cage induction motors, " in Proc. Int. Conf. Electr. Mach. Syst. (ICEMS), Oct. 2008, pp. 751-754.
3. J.-H. Jung, L. Jong-Jae, and B.-H. Kwon, "Online diagnosis of induction motors using MCSA, " IEEE Trans. Ind. Electron., vol. 53, no. 6, pp. 1842-1852, Dec. 2006.
4. A. Sadeghian, Z. Ye, and B. Wu, "Online detection of broken rotor bars in induction motors by wavelet packet decomposition and artificial neural networks, " IEEE Trans. Instrum. Meas., vol. 58, no. 7, pp. 2253-2263, Jul. 2009.
5. M. Riera-Guasp, M. Pineda-Sanchez, J. Perez-Cruz, R. Puche-Panadero, J. Roger-Folch, and J. A. Antonino-Daviu, "Diagnosis of induction motor faults via Gabor analysis of the current in transient regime, " IEEE Trans. Instrum. Meas., vol. 61, no. 6, pp. 1583-1596, Jun. 2012.
6. M. Pineda-Sanchez, M. Riera-Guasp, J. Roger-Folch, J. A. Antonino-Daviu, J. Perez-Cruz, and R. Puche-Panadero, "Diagnosis of induction motor faults in time-varying conditions using the polynomial-phase transform of the current, " IEEE Trans. Ind. Electron., vol. 58, no. 4, pp. 1428-1439, Apr. 2011.
7. J. de Jesus Rangel-Magdaleno, H. Peregrina-Barreto, J. M. Ramirez-Cortes, P. Gomez-Gil, and R. Morales-Caporal, "FPGAbased broken bars detection on induction motors under different load using motor current signature analysis and mathematical morphology, " IEEE Trans. Instrum. Meas., vol. 63, no. 5, May 2014, Art. ID 2286931.
8. N. Q. Hu, L. R. Xia, F. S. Gu, and G. J. Qin, "A novel transform demodulation algorithm for motor incipient fault detection, " IEEE Trans. Instrum. Meas., vol. 60, no. 2, pp. 480-487, Feb. 2011.
9. L. Cristaldi, M. Faifer, M. Lazzaroni, and S. Toscani, "An inverterfed induction motor diagnostic tool based on time-domain current analysis, " IEEE Trans. Instrum. Meas., vol. 58, no. 5, pp. 1454-1461, May 2009.
10. G. Betta, C. Liguori, A. Paolillo, and A. Pietrosanto, "A DSP-based FFTanalyzer for the fault diagnosis of rotating machine based on vibration analysis, " IEEE Trans. Instrum. Meas., vol. 51, no. 6, pp. 1316-1322, Dec. 2002.
11. J. de Jesus Rangel-Magdaleno, R. de Jesus Romero-Troncoso, R. A. Osornio-Rios, E. Cabal-Yepez, and A. Dominguez-Gonzalez, "FPGA-based vibration analyzer for continuous CNC machinery monitoring with fused FFT-DWT signal processing, " IEEE Trans. Instrum. Meas., vol. 59, no. 12, pp. 3184-3194, Dec. 2010.
12. P. J. Rodriguez, A. Balahcen, and A. Arkkio, "Signatures of electrical faults in the force distribution and vibration pattern of induction motors, " IEE Proc. Electr. Power Appl., vol. 153, no. 4, pp. 523-529, Jul. 2006.
13. L. M. R. Baccarini, V. V. Rocha e Silva, B. R. de Menezes, and W. M. Caminhas, "SVM practical industrial application for mechanical faults diagnostic, " Expert Syst. Appl., vol. 38, no. 6, pp. 6980-6984, 2011.
14. C. Rodriguez-Donate, R. J. Romero-Troncoso, A. Garcia-Perez, and D. A. Razo-Montes, "FPGA based embedded system for induction motor failure monitoring at the start-up transient vibrations with wavelets, " in Proc. Int. Symp. Ind. Embedded Syst. (SIES), Jun. 2008, pp. 208-214.
15. A. Sadoughi, M. Ebrahimi, M. Moalem, and S. Sadri, "Intelligent diagnosis of broken bars in induction motors based on new features in vibration spectrum, " in Proc. IEEE Int. Symp. Diag. Electr. Mach., Power Electron. Drives (SDEMPED), Sep. 2007, pp. 106-111.
16. A. Sadoughi, M. Ebrahimi, and E. Rezaei, "A new approach for induction motor broken bar diagnosis by using vibration spectrum, " in Proc. Int. Joint Conf. SICE-ICASE, Oct. 2006, pp. 4715-4720.
17. H. Su and K. T. Chong, "Induction machine condition monitoring using neural network modeling, " IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 241-249, Feb. 2007.
18. L. M. Contreras-Medina, R. J. Romero-Troncoso, J. R. Millan-Almaraz, and C. Rodriguez-Donate, "FPGA based multiple-channel vibration analyzer embedded system for industrial applications in automatic failure detection, " in Proc. Symp. Ind. Embedded Syst., Jun. 2008, pp. 229-232.
19. B. M. Ebrahimi, J. Faiz, and B. Akin, "Pattern recognition for broken bars fault diagnosis in induction motors under various supply conditions, " Eur. Trans. Electr. Power, vol. 22, no. 8, pp. 1176-1190, 2012.
20. M. R. Mehrjou, N. Mariun, M. H. Marhaban, and N. Misron, "Rotor Fault condition monitoring techniques for squirrel-cage induction machine-A review, " Mech. Syst. Signal Process., vol. 25, no. 8, pp. 2827-2848, Nov. 2011.
21. M. Cabanãs et al., "Unambiguous detection of broken bars in asynchronous motors by means of a flux measurement-based procedure, " IEEE Trans. Instrum. Meas., vol. 60, no. 3, pp. 891-899, Mar. 2011.
22. M. Eltabach, A. Charara, and I. Zein, "A comparison of external and internal methods of signal spectral analysis for broken rotor bars detection in induction motors, " IEEE Trans. Ind. Electron., vol. 51, no. 1, pp. 107-121, Feb. 2004.
23. R. Valles-Novo, J. Rangel-Magdaleno, J. Ramirez-Cortes, H. Peregrina-Barreto, and R. Morales-Caporal, "Broken bar detection on squirrel cage induction motors with MCSA and EMD, " in Proc. IEEE Int. Instrum. Meas. Tech. Conf., May 2014, pp. 993-998.
24. N. E. Huang et al., "The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis, " Proc. Roy. Soc. A, Math. Phys. Eng. Sci., vol. 454, no. 1971, pp. 903-995, Mar. 1988.
25. Z.-W. Jian, Z.-H. Ning, Y. Li, Y. Qi, and L. Qing, "A fault diagnosis approach for broken rotor bars based on EMD and envelope analysis, " J. China Univ. Mining Technol., vol. 17, no. 2, pp. 205-209, Jun. 2007.
26. C. Yiguang, Z. Hongxia, and S. Yonghuan, "Method of EMD and ZOOM-FFT to detect the broken bars fault in induction motor, " in Proc. Int. Conf. Electr. Mach. Syst. (ICEMS), Oct. 2010, pp. 1387-1391.
27. D. Camarena-Martinez, M. Valtierra-Rodriguez, A. Garcia-Perez, R. A. Osornio-Rios, and R. de Jesus Romero-Troncoso, "Empirical mode decomposition and neural networks on FPGA for fault diagnosis in induction motors, " Sci. World J., vol. 2014, Feb. 2014, Art. ID 908140.
28. G. Rilling, P. Flandrin, and P. Goncalves, "On empirical mode decomposition and its algorithms, " in Proc. 6th IEEE/EURASIP Workshop Nonlinear Signal Image Process. (NSIP), Grado, Italy, 2003, pp. 8-11.