A DSP-based FFT-analyzer for the fault diagnosis of rotating machine based on vibration analysis

IEEE Transactions on Instrumentation and Measurement

Volumn 51, Issue 6, 2002, Pages 1316-1321

  Betta, Giovanni ^a,b   Liguori, Consolatina ^b   Paolillo, Alfredo ^c   Pietrosanto, Antonio ^c  

^a IEEE   (Italy)

^b UNIVERSITY OF CASSINO AND SOUTHERN LAZIO   (Italy)

^c UNIVERSITY OF SALERNO   (Italy)

Author keywords

DSP; Fault diagnosis; Frequency domain analysis; Rotating machines; Vibration analysis

Indexed keywords

DSP; FAULT DIAGNOSIS; VIBRATION ANALYSIS;

COMPUTER HARDWARE; COMPUTER SOFTWARE; DIGITAL SIGNAL PROCESSING; FAST FOURIER TRANSFORMS; FREQUENCY DOMAIN ANALYSIS; INDUCTION MOTORS; VIBRATIONS (MECHANICAL);

ROTATING MACHINERY;

EID: 4043048955     PISSN: 00189456     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIM.2002.807987     Document Type: Article

References (29)

1. J. S. Mitchell, Introduction to Machinery Analysis and Monitoring, 2nd ed. Tulsa, OK: Pennwell, 1993.
2. R. A. Munoz and C. G. Nahmias, "Mechanical vibration of three-phase induction motors fed by nonsinusoidal currents," in Proc. Int. Power Electron. Congr., 1994, pp. 166-172.
3. F. Filippetti, G. Franceschini, C. Tassoni, and P. Vas, "Broken bar detection in induction machines," Proc. IEE-IAS Annu. Meeting Conf., vol. 1, pp. 95-102, 1994.
4. C. M. Riley, B. K. Lin, T. G. Habetler, and R. R. Schoen, "A method for sensorless on-line vibration monitoring of induction machines," IEEE Trans. Ind. Applicat., vol. 34, pp. 1240-1245, Dec. 1998.
5. S. Nandi and H. A. Toliyat, "Condition monitoring and fault diagnosis of electrical machines - A review," in Record 1999 IEEE Thirty-Fourth IAS Annu. Meeting Conf. Industry Applicat. Conf., vol. 1, 1999, pp. 197-202.
6. A. Ypma, D. M. J. Tax, and R. P. W. Duin, "Robust machine fault detection with independent component analysis and support vector data description," Proc. IEEE Int. Workshop Neural Network Signal Processing, pp. 67-76, 1999.
7. A. Ypma and P. Pajaunen, "Rotating machine vibration analysis with second-order independent component analysis," Proce. IEEE Int. Workshop Independent Component Analysis Signal Separation, 1999.
8. D. J. Petty, "Analysis of bearing vibration monitoring," in IEE Colloq. Understanding Your Condition Monitoring, Ref. no. 1999/117, 1999, pp. 4/1-4/11.
9. W. R. Finley, M. M. Hodowanec, and W. G. Holler, "An analytical approach to solving motor vibration problems," IEEE Trans. Ind. Applicat., vol. 36, pp. 1467-1480, Oct. 2000.
10. R. F. M. Marçal, M. Negreiros, A. A. Susin, and J. Kovaleski, "A method to detect incipient faults in rotating machines based on vibration analysis and fuzzy logic," in Proc. Int. Workshop Virtual Intelligent Meas. Syst., Annapolis, MD, 2000, pp. 69-74.
11. M. Kay and S. L. Marple, "Spectrum analysis - A modern prospective," Proc. Inst. Elect. Eng., vol. 69, 1981.
12. S. L. Marple, Digital Spectral Analysis, with Applications. Englewood Cliffs, NJ: Prentice-Hall, 1987.
13. S. Jangi and Y. Jain, "Embedding spectral analysis in equipment," IEEE Spectrum, pp. 40-43, 1991.
14. A. Dimarogonas, Vibration for Engineers. Englewood Cliffs, NJ: Prentice-Hall, 1996.
15. B. Li, M. Y. Chow, Y. Tipsuwan, and J. C. Hung, "Neural-network- based motor rolling bearing fault diagnosis," IEEE Trans. Ind. Electron., vol. 47, pp. 1060-1069, Oct. 2000.
16. "Effective Machinery Measurement Using Dynamic Signal Analyzers," Hewlett Packard, Applicat. Note 243-1, 1990.
17. C. Offelli and D. Petri, "The influence of windowing on the accuracy of multifrequency signal parameter estimation," IEEE Trans. Instrum. Meas., vol. 41, pp. 256-264, Apr. 1992.
18. G. Betta, M. D'Apuzzo, C. Liguori, and A. Pietrosanto, "An intelligent FFT-analyzer," IEEE Trans. Instrum. Meas., vol. 47, pp. 1173-1179, Oct. 1998.
19. G. Betta, M. D'Apuzzo, and C. Liguori, "A multiple-DSP FFT-analyzer," Proc. IEEE Instrum. Meas. Technol. Conf., pp. 713-719, 1999.
20. G. Betta, C. Liguori, and A. Pietrosanto, A multi-application FFT-analyzer based on a DSP architecture, in IEEE Trans. Instrum. Meas., pp. 825-832, 2001, to be published.
21. A. Bernieri, G. Betta, and C. Liguori, "Setting up and characterization of multiple-DSP measurement stations," in Proc. IMEKO TC-4 Int. Symp., Budapest, Hungary, 1996, pp. 282-285.
22. _, "Real-time re-configuration of multi-DSP measurement stations," in Proc. IMEKO TC-4 Inte. Symp., Glasgow, U.K., 1997, pp. 253-256.
23. R. J. Patton, J. Chen, and S. B. Nielsen, "Model-based methods for fault diagnosis: Some guidelines," Trans. Meas. Control, vol. 17, pp. 73-83, 1995.
24. A. Bernieri, G. Betta, and C. Liguori, "On-line fault detection and diagnosis obtained by implementing neural algorithms on a digital signal processor," IEEE Trans. Instrum. Meas., vol. 45, pp. 894-899, Oct. 1996.
25. A. Baccigalupi, A. Bernieri, and A. Pietrosanto, "A digital-signal-processor-based measurement system for on-line fault detection," IEEE Trans. Instrum. Meas., vol. 46, pp. 731-736, June 1997.
26. G. Andria, M. Savino, and A. Trotta, "Windows and interpolation algorithms to improve electrical measurement accuracy," IEEE Trans. Instrum. Meas., vol. 88, pp. 856-863, Aug. 1989.
27. C. Offelli and D. Petri, "Interpolation techniques for real-time multifrequency waveform analysis," IEEE Trans. Instrum. Meas., vol. 39, pp. 106-111, Feb. 1990.
28. G. Betta, M. D'Apuzzo, and A. Pietrosanto, "A knowledge-based approach to instrument fault detection and isolation," IEEE Trans. Instrum. Meas., vol. 44, pp. 1009-1016, Dec., 1995.
29. G. Betta, M. Dell'Isola, C. Liguori, and A. Pietrosanto, "Expert systems and neural networks for instrument fault detection and isolation," in IEEE Workshop "Emerging Technol. Virtual Syst. Instrum. Meas.", Niagara Falls, ON, Canada, 1997, pp. 39-48.