FPGA-based broken bars detection on induction motors under different load using motor current signature analysis and mathematical morphology

IEEE Transactions on Instrumentation and Measurement

Volumn 63, Issue 5, 2014, Pages 1032-1040

  De Jesus Rangel Magdaleno, Jose ^a   Peregrina Barreto, Hayde ^b   Ramirez Cortes, Juan Manuel ^a   Gomez Gil, Pilar ^a   Morales Caporal, Roberto ^c  

^a INSTITUTO NACIONAL DE ASTROFÍSICA   (Mexico)

^b Laboratorio de Investigacion en Control Reconfigurable   (Mexico)

^c Institute Tecnólogico de Apizaco   (Mexico)

Author keywords

Broken bars; fault diagnosis; field programmable gate array (FPGA); mathematical morphology; MCSA

Indexed keywords

ALGORITHMS; ELECTRIC LINES; FAILURE ANALYSIS; FAULT DETECTION; FIELD PROGRAMMABLE GATE ARRAYS (FPGA); INDUCTION MOTORS;

BROKEN BAR; FAILURE DETECTION; MCSA; MECHANICAL LOADS; MOTOR CURRENT SIGNATURE ANALYSIS; ON-LINE APPLICATIONS; SPURIOUS FREQUENCY;

MATHEMATICAL MORPHOLOGY;

EID: 84898799709     PISSN: 00189456     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIM.2013.2286931     Document Type: Article

References (29)

1. S. Toscani, M. Faifer, M. Rossi, L. Cristaldi, and M. Lazzaroni, "Effects of the speed loop on the diagnosis of rotor faults in induction machines," IEEE Trans. Instrum. Meas., vol. 61, no. 10, pp. 2713-2722, Oct. 2012.
2. R. Puche-Panadero, M. Pineda-Sanchez, M. Riera-Guasp, J. Roger- Folch, E. Hurtado-Perez, and J. Perez-Cruz, "Improved resolution of the MCSA method via hilbert transform, enabling the diagnosis of rotor asymmetries at very low slip," IEEE Trans. Energy Convers., vol. 24, no. 1, pp. 52-59, Mar. 2009.
3. J. Cusido, L. Romeral, A. Garcia, J. Ortega, and J. Riba, "On-line fault detection method for induction machines based on signal convolution," Eur. Trans. Electr. Power, vol. 21, no. 1, pp. 475-488, 2011.
4. A. Jawadekar, M. Dhole, and S. Paraskar, "Signal processing based wavelet approach for fault detection of induction motor," Int. J. Sci. Spirituality Bus. Technol., vol. 1, no. 1, pp. 70-75, Mar. 2012.
5. M. Pineda-Sanchez, M. Riera-Guasp, J. A. Antonino-Daviu, J. Roger-Folch, J. Perez-Cruz, and R. Puche-Panadero, "Diagnosis of induction motor faults in the fractional fourier domain," IEEE Trans. Instrum. Meas., vol. 59, no. 8, pp. 2065-2075, Aug. 2010.
6. A. Garcia-Perez, R. Romero-Troncoso, E. Cabal-Yepez, R. Osornio-Rios, J. Rangel-Magdaleno, and H. Miranda, "Startup current analysis of incipient broken rotor bar in induction motors using high-resolution spectral analysis," in Proc. IEEE Int. Symp. Diag. Electr. Mach. Power Electron. Drives, Sep. 2011, pp. 657-663.
7. A. Ordaz-Moreno, R. J. Romero-Troncoso, J. Vite-Frias, J. R. Rivera-Guillen, and A. Garcia-Perez, "Automatic online diagnosis algorithm for broken-bar detection on induction motors based on discrete wavelet transform for FPGA implementation," IEEE Trans. Ind. Electron., vol. 55, no. 5, pp. 2193-2202, May 2008. (Pubitemid 351728770)
8. J. Rangel-Magdaleno, H. Peregrina-Barreto, and J. Ramirez-Cortes, "Broken bars detection on induction motor using MCSA and mathematical morphology: An experimental study," in Proc. IEEE Int. Conf. Instrumt. Meas., May 2013, pp. 825-829.
9. H. Keskes, A. Braham, and Z. Lachiri, "Broken rotor bar diagnosis in induction machines through stationary wavelet packet transform and multiclass wavelet SVM," Electr. Power Syst. Res., vol. 97, pp. 151-157, Apr. 2013.
10. L. Eren and M. J. Devaney, "Effect of current resampling in motor current signature analysis," in Proc. IEEE Int. Conf. Instrum. Meas., May 2013, pp. 345-348.
11. L. Cristaldi, M. Faifer, M. Lazzaroni, and S. Toscani, "An inverter-fed induction motor diagnostic tool based on time-domain current analysis," IEEE Trans. Instrum. Meas., vol. 58, no. 5, pp. 1454-1461, May 2009.
12. M. Riera-Guasp, M. Pineda-Sanchez, J. Perez-Cruz, R. Puche-Panadero, J. Roger-Folch, and J. A. Antonino-Daviu, "Diagnosis of induction motor faults via gabor analysis of the current in transient regime," IEEE Trans. Instrum. Meas., vol. 61, no. 6, pp. 1583-1596, Jun. 2012.
13. B. M. Ebrahimi, A. M. Takbash, and J. Faiz, "Losses calculation in linestart and inverter-fed induction motors under broken bar fault," IEEE Trans. Instrum. Meas., vol. 62, no. 1, pp. 140-152, Jan. 2013.
14. A. Sadeghian, Z. Ye, and B. Wu, "Online detection of broken rotor bars in induction motors by wavelet packet decomposition and artificial neural networks," IEEE Trans. Instrum. Meas., vol. 58, no. 7, pp. 2253-2263, Jul. 2009.
15. N. Q. Hu, L. R. Xia, F. S. Gu, and G. J. Qin, "A novel transform demodulation algorithm for motor incipient fault detection," IEEE Trans. Instrum. Meas., vol. 60, no. 2, pp. 480-487, Feb. 2011.
16. G. Betta, C. Liguori, A. Paolillo, and A. Pietrosanto, "A DSP-based FFT-analyzer for the fault diagnosis of rotating machine based on vibration analysis," IEEE Trans. Instrum. Meas., vol. 51, no. 6, pp. 1316-1322, Dec. 2002.
17. J. J. Rangel-Magdaleno, R. J. Romero-Troncoso, R. Osornio-Rios, E. Cabal-Yepez, and A. Dominguez-Gonzalez, "FPGA-based vibration analyzer for continuous CNC machinery monitoring with fused FFT-DWT signal processing," IEEE Trans. Instrum. Meas., vol. 59, no. 12, pp. 3184-3194, Dec. 2012.
18. D. Bayram and S. Seker, "Wavelet based neuro-detector for low frequencies of vibration signals in electric motors," Appl. Soft Comput., vol. 13, no. 5, pp. 2683-2691, 2013.
19. C. da Costa, M. Mathias, P. Ramos, and P. Silva, "A new approach for real time fault diagnosis in induction motors based on vibration measurement," in Proc. IEEE Instrum. Meas. Technol. Conf., May 2012, pp. 1164-1168.
20. L. Contreras-Medina, R. J. Romero-Troncoso, J. R. Millan-Almaraz, and C. Rodriguez-Donate, "FPGA based multiple-channel vibration analyzer embedded system for industrial applications in automatic failure detection," in Proc. Symp. Ind. Embedded Syst., Jun. 2008, pp. 229-232.
21. J. Rangel-Magdaleno, R. Romero-Troncoso, R. Osornio-Rios, E. Cabal-Yepez, and L. Contreas-Medina, "Novel methodology for online half-broken-bar detection on induction motors," IEEE Trans Instrum. Meas., vol. 58, no. 5, pp. 1690-1698, May 2009.
22. Y. Gritli, A. Di Tommaso, F. Filippetti, R. Miceli, C. Rossi, and A. Chatti, "Investigation of motor current signature and vibration analysis for diagnosing rotor broken bars in double cage induction motors," in Proc. Int. Symp. Power Electron. Electr. Drives, Autom. Motion, Jun. 2012, pp. 1360-1365.
23. B. M. Ebrahimi, J. Faiz, and B. Akin, "Pattern recognition for broken bars fault diagnosis in induction motors under various supply conditions," Eur. Trans. Electr. Power, vol. 22, no. 8, pp. 1176-1190, 2011.
24. M. R. Mehrjou, N. Mariun, M. H. Marhaban, and N. Misron, "Rotor fault condition monitoring techniques for squirrel-cage induction machine-A review," Mech. Syst. Signal Process., vol. 25, no. 8, pp. 2827-2848, Nov. 2011.
25. M. Cabanas, F. Pedrayes, M. Melero, C. Rojas-Garcia, J. Cano, G. Orcajo, et al., "Unambiguous detection of broken bars in asynchronous motors by means of a flux measurement-based procedure," IEEE Trans. Instrum. Meas., vol. 60, no. 3, pp. 891-899, Mar. 2011.
26. J. Serra, Image Analysis and Mathematical Morphology. New York, NY, USA: Academic, 1982.
27. P. Soille, Morphological Image Analysis: Principles and Applications. New York, NY, USA: Springer-Verlag, 2003.
28. T. Radil, P. M. Ramos, F. M. Janeiro, and A. Cruz-Serra, "PQ monitoring system for real-time detection and classification of disturbances in a single-phase power system," IEEE Trans. Instrum. Meas., vol. 57, no. 8, pp. 1725-1733, Aug. 2008.
29. M. Jing, X. Yan, W. Zengping, and L. Haofang, "A novel adaptive scheme of discrimination between internal faults and inrush currents of transformer using mathematical morphology," in Proc. IEEE Power Eng. Soc. General Meeting, Jun. 2006, pp. 1-7.