Prediction of surface roughness in end face milling based on Gaussian process regression and cause analysis considering tool vibration

International Journal of Advanced Manufacturing Technology

Volumn 75, Issue 9-12, 2014, Pages 1357-1370

  Zhang, Guojun ^a   Li, Jian ^a   Chen, Yuan ^a   Huang, Yu ^a   Shao, Xinyu ^a   Li, Mingzhen ^b  

^a HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

^b HUAZHONG AGRICULTURAL UNIVERSITY   (China)

Author keywords

3D map; End face milling; Frequency spectrum; Gaussian process regression; Surface roughness; Tool vibration

Indexed keywords

EXPERIMENTS; FORECASTING; GAUSSIAN DISTRIBUTION; GAUSSIAN NOISE (ELECTRONIC); MILLING (MACHINING); REGRESSION ANALYSIS; TURNING; VIBRATION ANALYSIS;

END FACES; FREQUENCY SPECTRA; GAUSSIAN PROCESS REGRESSION; MACHINED SURFACE QUALITY; QUALITY SPECIFICATIONS; TECHNICAL REQUIREMENT; TOOL VIBRATIONS; TRIAL-AND-ERROR PROCESS;

SURFACE ROUGHNESS;

EID: 85027946008     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-014-6232-6     Document Type: Article

References (40)

1. Halevi G, Weill RD (1995) Principles of process planning: a logical approach. Springer, Berlin
2. Kadirgama K, Muhamad MN, Ruzaimi M, Rejab M (2008) Optimization of surface roughness in end milling on mould aluminium alloys (AA6061-T6) using response surface method and radian basis function network. Jor J Mech Ind Eng 2(4):209–214
3. Abouelatta OB, Madl J (2001) Surface roughness prediction based on cutting parameters and tool vibrations in turning operations. J Mater Process Tech 118 (1):269–277
4. Benardos PG, Vosniakos G (2003) Predicting surface roughness in machining: a review. Int J Mach Tools Manuf 43 (8):833–844
5. Lou MS, Chen JC, Li CM (1998) Surface roughness prediction technique for CNC end-milling. J Ind Technol 15 (1):1–6
6. Zhang JZ, Chen JC, Kirby ED (2007) Surface roughness optimization in an end-milling operation using the Taguchi design method. J Mater Process Technol 184 (1):233–239
7. Bozdemir M, Aykut Ş (2012) Optimization of surface roughness in end milling Castamide. Int J Adv Manuf Technol 62 (5-8):495–503
8. Elhami S, Razfar MR, Farahnakian M, Rasti A (2013) Application of GONNS to predict constrained optimum surface roughness in face milling of high-silicon austenitic stainless steel. Int J Adv Manuf Technol 66 (5–8):975–986
9. Fuh KH, Wu CF (1995) A proposed statistical model for surface quality prediction in end-milling of Al alloy. Int J Mach Tools Manuf 35 (8):1187–1200
10. Benardos PG, Vosniakos GC (2002) Prediction of surface roughness in CNC face milling using neural networks and Taguchi’s design of experiments. Robot Cim-Int Manuf 18 (5):343–354
11. Lela B, Bajiç D, Joziç S (2009) Regression analysis, support vector machines, and Bayesian neural network approaches to modeling surface roughness in face milling. Int J Adv Manuf Technol 42 (11-12):1082–1088
12. Razfar MR, Zinati RF, Haghshenas M (2011) Optimum surface roughness prediction in face milling by using neural network and harmony search algorithm. Int J Adv Manuf Technol 52 (5-8):487–495
13. Antoniadis A, Savakis C, Bilalis N, Balouktsis A (2003) Prediction of surface topomorphy and roughness in ball-end milling. Int J Adv Manuf Technol 21 (12):965–971
14. Seeman M, Ganesan G, Karthikeyan R, Velayudham A (2010) Study on tool wear and surface roughness in machining of particulate aluminum metal matrix composite-response surface methodology approach. Int J Adv Manuf Technol 48 (5-8):613–624
15. Prakasvudhisarn C, Kunnapapdeelert S, Yenradee P (2009) Optimal cutting condition determination for desired surface roughness in end milling. Int J Adv Manuf Technol 41 (5–6):440–451
16. Tsao CC (2009) Grey-Taguchi method to optimize the milling parameters of aluminum alloy. Int J Adv Manuf Technol 40 (1–2):41–48
17. Kadirgama K, Muhamad MN ,(2009) Surface roughness analysis in end milling with response ant colony optimization 6th International Conference on Numerical Analysis in Engineering
18. Daymi A, Boujelbene M, Linares JM, Bayraktar E, Amara AB (2009) Influence of workpiece inclination angle on the surface roughness in ball end milling of the titanium alloy Ti-6Al-4V. J Achieve Mater Manuf Eng 35 (1):79–86
19. Zhongxiang H, Lei Z, Jiaxu T, Xuehong M, Xiaojun S (2009) Evaluation of three-dimensional surface roughness parameters based on digital image processing. Int J Adv Manuf Technol 40 (3–4):342–348
20. Kurt M, Bagci E, Kaynak Y (2009) Application of Taguchi methods in the optimization of cutting parameters for surface finish and hole diameter accuracy in dry drilling processes. Int J Adv Manuf Technol 40 (5–6):458–469
21. Suresh PVS, Venkateswara Rao P, Deshmukh SG (2002) A genetic algorithmic approach for optimization of surface roughness prediction model. Int J Mach Tools Manuf 42 (6):675– 680
22. Palani S, Natarajan U (2011) Prediction of surface roughness in CNC end milling by machine vision system using artificial neural network based on 2D Fourier transform. Int J Adv Manuf Technol 54 (9–12):1033–1042
23. Chen CC, Liu NM, Chiang KT, Chen H (2012) Experimental investigation of tool vibration and surface roughness in the precision end-milling process using the singular spectrum analysis. Int J Adv Manuf Technol 63 (5–8):797–815
24. Chandrasekaran M, Muralidhar M, Krishna CM, Dixit US (2010) Application of soft computing techniques in machining performance prediction and optimization: a literature review. Int J Adv Manuf Technol 46 (5–8):445–464
25. Williams CK, Rasmussen CE (1996) Gaussian processes for regression. MIT, Cambridge
26. Vapnik V (2000) The nature of statistical learning theory. Springer, Berlin
27. Smola AJ, Schölkopf B (2004) A tutorial on support vector regression. Stat Comput 14 (3):199–222
28. Chen T, Morris J, Martin E (2007) Gaussian process regression for multivariate spectroscopic calibration. Chemometr Intell Lab 87 (1):59–71
29. Likar B, Kocijan J (2007) Predictive control of a gasCliquid separation plant based on a Gaussian process model. Comput Chem Eng 31 (3):142–152
30. Park C, Huang JZ, Ding Y (2011) Domain decomposition approach for fast Gaussian Process Regression of large apatial data sets. J Mach Learn Res 12:1697–1728
31. MacKay D J (1997) Gaussian processes-a replacement for supervised neural networks?. NIPS97 Tutorial
32. Rasmussen CE (2004) Gaussian processes in machine learning, in Advanced Lectures on Machine Learning. Springer, Berlin Heidelberg New York, pp 63–71
33. Lo SP (2003) An adaptive-network based fuzzy inference system for prediction of workpiece surface roughness in end milling. J Mater Process Technol 142 (3):665–675
34. El-Mounayri H, Dugla Z, Deng H (2003) Prediction of surface roughness in end milling using swarm intelligence. Proceedings of the IEEE, pp 220–227
35. Chryssolouris G, Guillot M (1990) A comparison of statistical and AI approaches to the selection of process parameters in intelligent machining. J Manuf Sci E-T ASME 112:112–131
36. Altintas Y, Budak E (1995) Analytical prediction of stability lobes in milling. Cirp Ann-Manuf Technol 44 (1):357–362
37. Ismail F, Soliman E (1997) A new method for the identification of stability lobes in machining. Int J Mach Tools Manuf 37 (6):763–774
38. Insperger T, Stépán G (2001) Semi-discretization of delayed dynamical systems. Proceedings of the ASME 6
39. Insperger T, Stépán G (2004) Updated semi-discretization method for periodic delay-differential equations with discrete delay. Int J Numer Meth Fl 61 (1):117–141
40. Ding Y, Zhu L, Zhang X, Ding H (2010) A full-discretization method for prediction of milling stability. Int J Mach Tools Manuf 50 (5):502–509