A new approach for damage detection in asphalt concrete pavements using battery-free wireless sensors with non-constant injection rates

Measurement: Journal of the International Measurement Confederation

Volumn 110, Issue , 2017, Pages 217-229

  Hasni, Hassene ^a   Alavi, Amir H ^a   Jiao, Pengcheng ^a   Lajnef, Nizar ^a   Chatti, Karim ^a   Aono, Kenji ^b   Chakrabartty, Shantanu ^b  

^a Michigan State University   (United States)

^b WASHINGTON UNIVERSITY IN ST LOUIS   (United States)

Author keywords

Damage detection; Finite element modeling; Non constant injection rate; Polyvinylidene fluoride; Self powered wireless sensor

Indexed keywords

ABAQUS; ASPHALT; ASPHALT CONCRETE; CONCRETES; CRACK DETECTION; CRACKS; ELECTRIC BATTERIES; FINITE ELEMENT METHOD; FLUORINE COMPOUNDS;

3D FINITE ELEMENT MODEL; BATTERY-FREE WIRELESS SENSORS; INJECTION RATES; NUMERICAL AND EXPERIMENTAL STUDY; POLYVINYLIDENE FLUORIDES; SELF-POWERED SENSING; THREE POINT BENDING; WIRELESS SENSOR;

DAMAGE DETECTION;

EID: 85021996759     PISSN: 02632241     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.measurement.2017.06.035     Document Type: Article

References (40)

1. Xue, W., Wang, L., Wang, D., Druta, C., Pavement health monitoring system based on an embedded sensing network. J. Mater. Civ. Eng., 26(10), 2014, 04014072.
2. Potter, J.F., Mayhew, H.C., Mayo, A.P., Instrumentation of the Full Scale Experiment on A1 Trunk Road at Conington Huntingdonshire. 1969, Transport Research Laboratory (Road Research Laboratory), Wokingham Berkshire, U.K.
3. Badr, A., Karlaftis, A.G., Using the asphalt pavement dynamic stiffness modulus in assessing falling weight deflectometer test results. Adv. Mater. Res. 685 (2013), 233–239.
4. Badr, A., Karlaftis, A.G., Duration model estimation for pavement rehabilitation and service life. Adv. Appl. Stat. 31:1 (2012), 1–19.
5. Karlaftis, A.G., Badr, A., Predicting asphalt pavement crack initiation following rehabilitation treatments. Transp. Res. C 55 (2015), 510–517.
6. Huff, R., Berthelot, C., Daku, B., Continuous primary dynamic pavement response system using piezoelectric axle sensors. Can. J. Civ. Eng. 32:1 (2005), 260–269.
7. M. Malekzadeh, G. Atia, F.N. Catbas, A hybrid data interpretation framework for automated performance monitoring of infrastructure, in: Structures Congress 2015, 2015.
8. Arraigada, M., Partl, M.N., Angelone, S.M., Martìnez, F., Evaluation of accelerometers to determine pavement deflections under traffic loads. Mater. Struct., 42(6), 2009, 779.
9. T. Ryynänen, T. Pellinen, J. Belt, The use of accelerometers in the pavement performance monitoring and analysis, in: IOP Conference Series: Mater. Sci. Eng. vol. 10, no. 1, IOP Publishing, 2010, pp. 012110.
10. Ni, Y., Lu, X., Lu, W., Operational modal analysis of a high-rise multi-function building with dampers by a Bayesian approach. Mech. Syst. Sig. Process. 86 (2017), 286–307.
11. Mohajeri, M.H., Manning, P.J., ARIA: An Operating System of Pavement Distress Diagnosis by Image Processing, Transportation Research Record 1311. 1991, Transportation Research Board, Washington, DC, 120–130.
12. Koutsopoulos, H., Downey, A., Primitive based classification of pavement cracking images. J. Transp. Eng. 119:3 (1993), 402–418.
13. Mills, J.P., Newton, I., Peirson, G.C., Pavement deformation monitoring in a rolling load facility. Photogramm. Rec. 17:97 (2001), 7–24.
14. Plati, C.P., Loizos, A., Estimation of in-situ density and moisture content in HMA pavements based on GPR trace reflection amplitude using different frequencies. J. Appl. Geophys. 97 (2013), 3–10.
15. Plati, C., Georgiou, P., Loizos, A., Use of infrared thermography for assessing HMA paving and compaction. Transp. Res. C 46 (2014), 192–208.
16. Bagherifaez, M., Behnia, A., Majeed, A., Chai, H.K., Acoustic emission monitoring of multi-cell reinforced concrete box girders subjected to torsion. Sci. World J., 2014.
17. Behnia, A., Chai, H.K., Yorikawa, M., Momoki, S., Terazawa, M., Shiotani, T., Integrated non-destructive assessment of concrete structures under flexure by acoustic emission and travel time tomography. Constr. Build. Mater. 67:Part B (2014), 202–215.
18. Xu, D., Banerjee, S., Wang, Y., Huang, S., Cheng, X., Temperature and loading effects of embedded smart piezoelectric sensor for health monitoring of concrete structures. Constr. Build. Mater. 76 (2015), 187–193.
19. Sundaram, B.A., Ravisankar, K., Senthil, R., Parivalla, S., Wireless sensors for structural health monitoring and damage detection techniques. Curr. Sci. 104:11 (2013), 1496–1505.
20. Watters, D.G., Jayaweera, P., Bahr, A.J., Huestis, D.L., Priyantha, N., Meline, R., Reis, R., Parks, D., Smart pebble: wireless sensors for structural health monitoring of bridge decks. Proc. SPIE 5057 (2003), 20–28.
21. Lynch, J.P., Loh, K.J., A summary review of wireless sensors and sensor networks for structural health monitoring. Shock Vib. Digest 38 (2006), 91–128.
22. Ukkusuri, S., Du, L., Geometric connectivity of vehicular ad hoc networks: analytical characterization. Transp. Res. C 16:5 (2008), 615–634.
23. Salehi, H., Taghikhany, T., Fallah, A.Y., Seismic protection of vulnerable equipment with semi-active control by employing robust and clippedoptimal algorithms. Int. J. Civ. Eng. 12:4 (2014), 413–428.
24. Park, G., Rosing, T., Todd, M.D., Farrar, C.R., Hodgkiss, W., Energy harvesting for structural health monitoring sensor networks. J. Infrastruct. Syst. 14:1 (2008), 64–79.
25. N. Lajnef, R. Burgueño, W. Borchani, Y. Sun, A. Heeringa, Characterization of mechanically-equivalent amplifiers and frequency modulating concepts for energy harvesting devices, in: ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stone Mountain, GA, September 2012.
26. Lajnef, N., Borchani, W., Burgueño, R., Chakrabartty, S., Self-powered Piezo-Floating-Gate smart-gauges based on quasi-static mechanical energy concentrators and triggers. IEEE Sens. J. 15:2 (2015), 676–683.
27. Aladwani, A., Aldraihem, O., Baz, A., Piezoelectric vibration energy harvesting from a two-dimensional coupled acoustic-structure system with a dynamic magnifier. J. Vib. Acoust., 137(3), 2015, 031002.
28. Roundy, S., Wright, P.K., Rabaey, J., A study of low level vibrations as a power source for wireless sensor nodes. Comput. Commun. 26 (2002), 1131–1144.
29. Lajnef, N., Chakrabartty, S., Elvin, N., A piezo-powered floating-gate sensor array for long-term fatigue monitoring in biomechanical implants. IEEE Trans. Biomed. Circuits Syst. 2:3 (2008), 164–172.
30. Korhonen, I., Lankinen, R., Energy harvester for a wireless sensor in a boiler environment. Meas. 58 (2014), 241–248.
31. Jiao, P., McGraw, B., Chen, A., Davalos, J.F., Ray, I., Flexural-torsional buckling of cantilever composite wood I-beams with sinusoidal web geometry. Earth and Space, 2012, 684–693, 10.1061/9780784412190.074.
32. Chen, A., Davalos, J.F., Jiao, P., McGraw, B., Buckling behavior of sinusoidal web for composite wood I-joist with elastically restrained loaded edges under compression. J. Eng. Mech. 139 (2013), 1065–1072.
33. W. Borchani, N. Lajnef, R. Burgueño, Model development for Dynamic Energy Conversion in post-buckled multi-stable slender columns, in: ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Newport, Rhode Island, September 2014.
34. Elvin, N., Elvin, A., Spector, M., A self-powered mechanical strain energy sensor. Smart Mater. Struct. 10 (2001), 293–299.
35. N. Lajnef, K. Chatti, S. Chakrabartty, M. Rhimi, P. Sarkar, Smart Pavement Monitoring System, Report: FHWA-HRT-12-072, Federal Highway Administration (FHWA), Washington, DC, 2013.
36. H. Salehi, S. Das, S. Chakrabartty, S. Biswas, R. Burgueno, Structural Assessment and Damage Identification Algorithms Using Binary Data, in: ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2015), Colorado Springs, Colorado, 2015.
37. Alavi, A.H., Hasni, H., Lajnef, N., Chatti, K., Faridazar, F., An intelligent structural damage detection approach based on self-powered wireless sensor data. Autom. Constr. 62 (2016), 24–44.
38. Alavi, A.H., Hasni, H., Lajnef, N., Chatti, K., Continuous health monitoring of pavement systems using smart sensing technology. Constr. Build. Mater. 114 (2016), 719–736.
39. Alavi, A.H., Hasni, H., Lajnef, N., Chatti, K., Damage growth detection in steel plates: Numerical and experimental studies. Eng. Struct. 128 (2016), 124–138.
40. Hasni, H., Alavi, A.H., Jiao, P., Lajnef, N., Detection of fatigue cracking in steel bridge girders: a support vector machine approach. Arch. Civil Mech. Eng. 17:3 (2017), 609–622.