Detection, Measurement, and Classification of Partial Discharge in a Power Transformer: Methods, Trends, and Future Research

IETE Technical Review (Institution of Electronics and Telecommunication Engineers, India)

Volumn 35, Issue 5, 2018, Pages 483-493

  Mondal, Mithun ^a   Kumbhar, G B ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY ROORKEE   (India)

Author keywords

acoustic methods; electrical methods; Partial discharge; power transformer; ultra high frequency (UHF) methods

Indexed keywords

HIGH FREQUENCY TRANSFORMERS; PARTIAL DISCHARGES; SIGNAL PROCESSING;

ACOUSTIC METHOD; CATASTROPHIC FAILURES; ELECTRICAL METHODS; HYBRID METHOD; INSULATION DEGRADATION; SERVICE ENGINEERS; ULTRA HIGH FREQUENCY METHOD; ULTRA-HIGH FREQUENCY;

POWER TRANSFORMERS;

EID: 85020660141     PISSN: 02564602     EISSN: 09745971     Source Type: Journal    
DOI: 10.1080/02564602.2017.1335244     Document Type: Review

References (117)

1. M., Mondal and G. B., Kumbhar, (2016). “Partial discharge localization in a power transformer: Methods, trends, and future research,” IETE Tech. Rev., pp. 1–10.
2. J., Mason. (1978). “Disharges,” IEEE Trans. Elect. Insul. EI-19 (4), pp. 211–238.
3. J., Devins. (1984). “The physics of partial discharges in solid dielectrics,” IEEE Trans. Elect. Insul. EI-19 (5), pp. 475–495.
4. R. J. V., Brunt. (1994). “Physics and chemistry of partial discharge and corona – recent advances and future challenges,” IEEE Trans. Dielect. Electr. Insul. 1 (5), pp. 761–784.
5. P., Morshuis. (2005). “Degradation of solid dielectrics due to internal partial discharge: Some thoughts on progress made and where to go now,” IEEE Trans. Dielect. Electr. Insul. 12 (5), pp. 905–913.
6. L., Niemeyer. (1995). “A generalized approach to partial discharge modeling,” IEEE Trans. Dielect. Electr. Insul. 2 (4), pp. 510–528.
7. A., Pedersen, G. C., Crichton and I. W., McAllister. (1991). “The theory and measurement of partial discharge transients,” IEEE Trans. Elect. Insul. 26 (3), pp. 487–497.
8. A., Pedersen, G., Crichton and I., McAllister. (1995). “The functional relation between partial discharges and induced charge,” IEEE Trans. Dielect. Electr. Insul. 2 (4), pp. 535–543.
9. E., Lemke. (2012). “A critical review of partial discharge models,” IEEE Electr. Insul. Mag. 28 (6), pp. 11–16.
10. G., Crichton, P., Karlsson and A., Pedersen. (1989). “Partial discharges in ellipsoidal and spheroidal voids,” IEEE Trans. Elect. Insul. 24 (2), pp. 335–342.
11. Z., Achillides, G. E., Georghiou and E., Kyriakides. (2008). “Partial discharges and associated transients: The induced charge concept versus capacitive modeling,” IEEE Trans. Dielect. Electr. Insul. 15 (6), pp. 1507–1516.
12. R., Bartnikas and G., dOmbrain. (1963). “A method for determining the dissipation factor value from corona intensity and pulse count,” IEEE Trans. Power Appar. Syst. 82, pp. 366–375.
13. R., Bartnikas and G. L., d'Ombrain. (Sep. 1965) “A study of corona discharge rate and energy loss in spark gaps,” IEEE Trans. Power Appar. Syst. 84 (9), pp. 770–779.
14. R., Bartnikas and J. H. E., Levi. (1969). “A simple pulse height analyzer for partial-discharge-rate measurements,” IEEE Trans. Instrum. Meas. 18 (4), pp. 341–345.
15. P., von Glahn and R. J. V., Brunt. (Aug. 1995). “Continuous recording and stochastic analysis of PD,” IEEE Trans. Dielect. Electr. Insul. 2 (4), pp. 590–601.
16. B., Ward. (1992). “Digital techniques for partial discharge measurements,” IEEE Trans. Power Deliv. 7 (2), pp. 469–479.
17. P., Osvath. (1995). “Comment and discussion on digital processing of PD pulses,” IEEE Trans. Dielect. Electr. Insul. 2 (4), pp. 685–699.
18. Y., Kawaguchi and S., Yanabu. (1969). “Partial discharge measurement on high-voltage power transformers,” IEEE Trans. Power Appar. Syst. PAS-88 (8), pp. 1187–1194.
19. W., Carter. (1982). “Practical aspects of apparent charge partial discharge measurements,” IEEE Trans. Power Appar. Syst. PAS-101 (7), pp. 1985–1989.
20. G. H., Vaillancourt, R., Malewski and D., Train. (1985). “Comparison of three techniques of partial discharges measurement in power transformers,” IEEE Trans. Power Appar. Syst. PAS-104 (4), pp. 900–909.
21. R., Bartnikas. (2002). “Partial discharges their mechanism, detection and measurement,” IEEE Trans. Dielect. Electr. Insul. 9 (5), pp. 763–808.
22. G., Stone, H., Sedding, N., Fujimoto and J., Braun. (1992). “Practical implementation of ultra-wideband partial discharge detectors,” IEEE Trans. Elect. Insul. 27 (1), pp. 70–81.
23. S., Boggs and G., Stone. (1982). “Fundamental Limitations in the measurement of corona and partial discharge,” IEEE Trans. Elect. Insul. EI-17 (2), pp. 143–150.
24. T., Brosche, W., Hiller, E., Fauser, and W., Pfeiffer. (1999). “Novel characterization of PD signals by real-time measurement of pulse parameters,” IEEE Trans. Dielect. Electr. Insul. 6 (1), pp. 51–59.
25. H., Okubo and N., Hayakawa. (2005). “A novel technique for partial discharge and breakdown investigation based on current pulse waveform analysis,” IEEE Trans. Dielect. Electr. Insul. 12 (4), pp. 736–744.
26. R., Bartnikas. (1987). “A commentary on partial discharge measurement and detection,” IEEE Trans. Elect. Insul. EI-22 (5), pp. 629–653.
27. D., Nattrass. (1988). “Partial discharge measurement and interpretation,” IEEE Electr. Insul. Mag. 4 (3), pp. 10–23.
28. R. E., James, F. E., Trick, B. T., Phung and P. A., White. (1986). “Interpretation of partial discharge quantities as measured at the terminals of HV power transformers,” IEEE Trans. Elect. Insul. EI-21 (4), pp. 629–638.
29. L., Lundgaard. (1992). “Partial discharge – Part XIII: Acoustic partial discharge detection fundamental considerations,” IEEE Electr. Insul. Mag. 8 (4), pp. 25–31.
30. S. A., Boggs. (1990). “Partial discharge – Part II: Detection sensitivity,” IEEE Electr. Insul. Mag. 6 (5), pp. 35–42.
31. E., Howells and E. T., Norton. (1978). “Detection of partial discharges in transformers using acoustic emission techniques,” IEEE Trans. Power Appar. Syst. PAS-97 (5), pp. 1538–1549.
32. T., Boczar. (2001). “Identification of a specific type of PD from acoustic emission frequency spectra,” IEEE Trans. Dielect. Electr. Insul. 8 (4), pp. 598–606.
33. A., Farag, M., Shewhdi, X., Jin, C., Wang, T., Cheng, X., Dong, S., Gao, W., Jing and Z., Wang. (1999). “On-line partial discharge calibration and monitoring for power transformers,” Electr. Power Syst. Res. 50 (1), pp. 47–54.
34. G., Robles, R., Albarracin and J. M., Martinez Tarifa. (2013). “Shielding effect of power transformers tanks in the ultra-high-frequency detection of partial discharges,” IEEE Trans. Dielect. Electr. Insul. 20 (2), pp. 678–684.
35. S., Coenen, S., Tenbohlen, S., Markalous and T., Strehl. (2008). “Sensitivity of UHF PD measurements in power transformers,” IEEE Trans. Dielect. Electr. Insul. 15 (6), pp. 1553–1558.
36. M. D., Judd, L., Yang and I. B. B., Hunter. (2005). “Partial discharge monitoring for power transformers using UHF sensors Part 1: Sensors and signal interpretation,” IEEE Electr. Insul. Mag. 21 (2), pp. 5–14.
37. M., Judd, Li, Yang and I., Hunter. (2005). “Partial discharge monitoring for power transformer using UHF sensors. Part 2: Field experience,” IEEE Electr. Insul. Mag. 21 (3), pp. 5–13.
38. M., Judd, O., Farish, J., Pearson and B., Hampton. (2001). “Dielectric windows for UHF partial discharge detection,” IEEE Trans. Dielect. Electr. Insul. 8 (6), pp. 953–958.
39. S., Rudd, S. J., Mcarthur and M., Judd. (2010). “A generic knowledge-based approach to the analysis of partial discharge data,” IEEE Trans. Dielect. Electr. Insul. 17 (1), pp. 149–156.
40. J., Jian Li, T., Jiang, C., Wang and C., Cheng. (2012). “Optimization of UHF Hilbert Antenna for Partial Discharge Detection of Transformers,” IEEE Trans. Antennas Propag. 60 (5), pp. 2536–2540.
41. J., Li, T., Jiang, C., Cheng and C., Wang. (2013). “Hilbert fractal antenna for UHF detection of partial discharges in transformers,” IEEE Trans. Dielect. Electr. Insul. 20 (6), pp. 2017–2025.
42. Y., Shibuya, S., Matsumoto, M., Tanaka, H., Muto and Y., Kaneda. (2010). “Electromagnetic waves from partial discharges and their detection using patch antenna,” IEEE Trans. Dielect. Electr. Insul. 17 (3), pp. 862–871.
43. D., Aschenbrenner and H. G., Kranz. (2005). “On line PD measurements and diagnosis on power transformers,” IEEE Trans. Dielect. Electr. Insul. 12 (2), pp. 216–222.
44. S., Tenbohlen, D., Denissov, S., Hoek and S. M., Markalous. (2008). “Partial discharge measurement in the ultra-high frequency (UHF) range,” IEEE Trans. Dielect. Electr. Insul. 15 (6), pp. 1544–1552.
45. P., Moore, I., Portugues and I., Glover. (2006). “Partial discharge investigation of a power transformer using wireless wideband radio-frequency measurements,” IEEE Trans. Power Deliv. 21 (1), pp. 528–530.
46. J., Lopez-Roldan, T., Tang and M., Gaskin. (2008). “Optimisation of a sensor for onsite detection of partial discharges in power transformers by the UHF method,” IEEE Trans. Dielect. Electr. Insul. 15 (6), pp. 1634–1639.
47. G., Robles, M., Snchez-Fernndez, R. A., Snchez, M. V., Rojas-Moreno, E., Rajo-Iglesias and J. M., Martinez-Tarifa. (2013). “Antenna parametrization for the detection of partial discharges,” IEEE Trans. Instrum. Meas. 62 (5), pp. 932–941.
48. G. P., Cleary and M. D., Judd. (2006). “UHF and current pulse measurements of partial discharge activity in mineral oil,” IEE Proc. Sci. Meas. Technol. 153 (2), pp. 47–54.
49. M., Beltle, A., Muller, and S., Tenbohlen. (2012). “Statistical analysis of online ultrahigh-frequency partial-discharge measurement of power transformers,” IEEE Electr. Insul. Mag. 28 (6), pp. 17–22.
50. M., Hikita, S., Okabe, H., Murase and H., Okubo. (2008). “Cross-equipment evaluation of partial discharge measurement and diagnosis techniques in electric power apparatus for transmission and distribution,” IEEE Trans. Dielect. Electr. Insul. 15 (2), pp. 505–518.
51. S., Birlasekaran and W. H., Leong. (2007). “Comparison of known PD signals with the developed and commercial HFCT sensors,” IEEE Trans. Power Deliv. 22 (3), pp. 1581–1590.
52. Q., Su. (1992). “Analysis of partial discharge pulse distribution along transformer windings using digital filtering techniques,” IEE Proc. C Gener. Transm. Distrib. UK 139 (5), pp. 402–410.
53. G., Vaillancourt and R., Malewski. (1989). “Digital acquisition and processing of partial discharges during acceptance test of HV transformers,” IEEE Trans. Power Deliv. 4 (1), pp. 421–427.
54. I., Shim, J. J., Soraghan and W., Siew. (2000). “Digital signal processing applied to the detection of partial discharge: An overview,” IEEE Electr. Insul. Mag. 16 (3), pp. 6–12.
55. X., Wang, B., Li, H., Roman, O., Russo, K., Chin and K., Farmer. (2006). “Acousto-optical PD detection for transformers,” IEEE Trans. Power Deliv. 21 (3), pp. 1068–1073.
56. B., Dong, M., Han, L., Sun, J., Wang, Y., Wang and A., Wang. (2008). “Sulfur hexafluoride-filled extrinsic Fabry-Perot interferometric fiber-optic sensors for partial discharge detection in transformers,” IEEE Photon. Technol. Lett. 20 (18), pp. 1566–1568.
57. S., Lima, O., Frazao, R., Farias, F., Araujo, L., Ferreira, J., Santos and V., Miranda. (2010). “Mandrel-based fiber-optic sensors for acoustic detection of partial discharges-a proof of concept,” IEEE Trans. Power Deliv. 25 (4), pp. 2526–2534.
58. D., Kweon, S., Chin, H., Kwak, J., Kim and K., Song. (2005). “The analysis of ultrasonic signals by partial discharge and noise from the transformer,” IEEE Trans. Power Deliv. 20 (3), pp. 1976–1983.
59. E., Grossmann and K., Feser. (2005). “Sensitive online PD-measurements of onsite oil/paper-insulated devices by means of optimized acoustic emission techniques,” IEEE Trans. Power Deliv. 20 (1), pp. 158–162.
60. T., Babnik and G., Street. (2007). “Data mining on a transformer partial discharge data using the self-organizing map,” IEEE Trans. Dielect. Electr. Insul. 14 (2), pp. 444–452.
61. H., Kawada and M., Honda. (1984). “Partial discharge automatic monitor for oil-filled power transformer,” IEEE Trans. Power Appar. Syst. PAS-103 (2), pp. 422–428.
62. J., Rubio-Serrano, M., Rojas-Moreno, J., Posada, J., Martinez-Tarifa, G., Robles and J., Garcia-Souto. (2012). “Electro-acoustic detection, identification and location of partial discharge sources in oil-paper insulation systems,” IEEE Trans. Dielect. Electr. Insul. 19 (5), pp. 1569–1578.
63. S. M., Markalous, S., Tenbohlen and K., Feser. (2008). “Detection and location of partial discharges in power transformers using acoustic and electromagnetic signals,” IEEE Trans. Dielect. Electr. Insul. 15 (6), pp. 1576–1583.
64. A. H., El-Hag, Y. A., Saker and I. Y., Shurrab. (2011). “Online oil condition monitoring using a partial-discharge signal,” IEEE Trans. Power Deliv. 26 (2), pp. 1288–1289.
65. T., Takada and Y., Inoue. (1996). “Dynamic observation of needle-plane surface-discharge using the electro-optical Pockels effect,” IEEE Electr. Insul. Mag. 3 (3), pp. 460–468.
66. S., Adili and C., Franck. (2012). “Application of pulsed x-ray induced partial discharge measurements,” IEEE Trans. Dielect. Electr. Insul. 19 (5), pp. 1833–1839.
67. V., Nagesh and B. I., Gururaj. (1993). “Evaluation of digital filters for rejecting discrete spectral interference in on-site PD measurements,” IEEE Trans. Elect. Insul. 28 (1), pp. 73–85.
68. H., Borsi. (2000). “A PD measuring and evaluation system based on digital signal processing,” IEEE Trans. Dielect. Electr. Insul. 7 (1), pp. 21–29.
69. M. B., Ashtiani and S. M., Shahrtash. (2012). “Feature-oriented de-noising of partial discharge signals employing mathematical morphology filters,” IEEE Trans. Dielect. Electr. Insul. 19 (6), pp. 2128–2136.
70. J. C., Chan, H., Ma and T. K., Saha. (2014). “Automatic blind equalization and thresholding for partial discharge measurement in power transformer,” IEEE Trans. Power Deliv. 29 (4), pp. 1927–1938.
71. U., Kopf and K., Feser. (1995). “Rejection of narrow-band noise and repetitive pulses in on-site PD measurements,” IEEE Trans. Dielect. Electr. Insul. 2 (3), pp. 433–446.
72. S., Sriram, S., Nitin, K., Prabhu, and M., Bastiaans. (2005). “Signal denoising techniques for partial discharge measurements,” IEEE Trans. Dielect. Electr. Insul. 12 (6), pp. 1182–1191.
73. H., Zhang, T. R., Blackburn, B. T., Phung and D., Sen. (2007). “A novel wavelet transform technique for on-line partial discharge measurements part-1: WT de-noising algorithm,” IEEE Trans. Dielect. Electr. Insul. 14 (1), pp. 3–14.
74. H., Zhang, T. R., Blackburn, B. T., Phung and D., Sen. (2007). “A novel wavelet transform technique for on-line partial discharge measurements. 2. on-site noise rejection application,” IEEE Trans. Dielect. Electr. Insul. 14 (1), pp. 15–22.
75. J., Li, T., Jiang, S., Grzybowski, and C., Cheng. (2010). “Scale dependent wavelet selection for denoising of partial discharge detection,” IEEE Trans. Dielect. Electr. Insul. 17 (6), pp. 1705–1714.
76. S., Grzybowski. (2012). “Wavelet de-noising of partial discharge signals based on genetic adaptive threshold estimation,” IEEE Electr. Insul. Mag. 19 (2), pp. 543–549.
77. J., Seo, H., Ma and T., Saha. (2015). “Probabilistic wavelet transform for partial discharge measurement of transformer,” IEEE Trans. Dielect. Electr. Insul. 22 (2), pp. 1105–1117.
78. X., Song, C., Zhou, D. M., Hepburn, G., Zhang and M., Michel. (2007). “Second generation wavelet transform for data denoising in PD measurement,” IEEE Electr. Insul. Mag. 14 (6), pp. 237–240.
79. A., Cavallini, A., Contin, G. C., Montanari and F., Puletti. (2003). “Advanced PD inference in on-field measurements. Part I: noise rejection,” IEEE Trans. Dielect. Electr. Insul. 10 (May), pp. 216–224.
80. M., Ashtiani and S., Shahrtash. (2014). “Partial discharge de-noising employing adaptive singular value decomposition,” IEEE Trans. Dielect. Electr. Insul. 21 (2), pp. 775–782.
81. T., Abdel-Galil, A., El-Hag, A., Gaouda, M., Salama, and R., Bartnikas. (2008). “De-noising of partial discharge signal using eigen-decomposition technique,” IEEE Trans. Dielect. Electr. Insul. 15 (6), pp. 1657–1662.
82. J., Chan, H., Ma, T., Saha and C., Ekanayake. (2014). “Self-adaptive partial discharge signal de- noising based on ensemble empirical mode decomposition and automatic morphological thresholding,” IEEE Trans. Dielect. Electr. Insul. 21 (1), pp. 294–303.
83. J. A., Ardila-Rey, J. M., Martinez-Tarifa, G., Robles and M. V., Rojas-Moreno. (2013). “Partial discharge and noise separation by means of spectral-power clustering techniques,” IEEE Trans. Dielect. Electr. Insul. 20 (4), pp. 1436–1443.
84. E., Gulski and A., Krivda. (1993). “Neural networks as a tool for recognition of partial discharges,” IEEE Trans. Elect. Insul. 28 (6), pp. 984–1001.
85. H. G., Kranz. (1993). “Diagnosis of partial discharge signals using neural networks and minimum distance classification,” IEEE Trans. Elect. Insul. 28 (6), pp. 1016–1024.
86. E. M., Lalitha and L., Satish. (2000). “Wavelet analysis for classification of multi-source PD patterns,” IEEE Trans. Dielect. Electr. Insul. 7 (1), pp. 40–47.
87. T., Hucker and H., Krantz. (1995). “Requirements of automated PD diagnosis systems for fault identification in noisy conditions,” IEEE Trans. Dielect. Electr. Insul. 2 (4), pp. 544–556.
88. A., Mazroua, M., Salama, and R., Bartnikas. (1993). “PD pattern recognition with neural networks using the multilayer perceptron technique,” IEEE Trans. Elect. Insul. 28 (6), pp. 1082–1089.
89. A. A., Mazroua, R., Bartnikas and M. M. A., Salama. (1994). “Discrimination between PD pulse shapes using different neural network paradigms,” IEEE Trans. Dielect. Electr. Insul. 1 (6), pp. 1119–1131.
90. M., Salama and R., Bartnikas. (2002). “Determination of neural-network topology for partial discharge pulse pattern recognition,” IEEE Trans. Neural Netw. 13 (2), pp. 446–456.
91. M., Salama and R., Bartnikas. (2000). “Fuzzy logic applied to PD pattern classification,” IEEE Trans. Dielect. Electr. Insul. 7 (1), pp. 118–123.
92. A., Mazroua, R., Bartnikas and M., Salama. (1995). “Neural network system using the multi-layer perceptron technique for the recognition of PD pulse shapes due to cavities and electrical trees,” IEEE Trans. Power Deliv. 10 (1), pp. 92–96.
93. A., Contin, A., Cavallini, G. C., Montanari, G., Pasini and F., Puletti. (2002). “Digital detection and fuzzy classification of partial discharge signals,” IEEE Trans. Dielect. Electr. Insul. 9 (3), pp. 335–348.
94. F. H., Kreuger, E., Gulski and A., Krivda. (1993). “Clas- sification of partial discharges,” IEEE Trans. Elect. Insul. 28 (6), pp. 917–931.
95. A., Contin, G., Montanari and C., Ferraro. (2000). “PD source recognition by weibull processing of pulse height distributions,” IEEE Trans. Dielect. Electr. Insul. 7 (1), pp. 48–58.
96. M., Cacciari, A., Contin and G., Montanari. (1995). “Use of a mixed-Weibull distribution for the identification of PD phenomena,” IEEE Trans. Dielect. Electr. Insul. 2 (6), pp. 1166–1179.
97. R., Van Brunt, E., Cernyar and P., Von Glahn. (1993). “Importance of unraveling memory propagation effects in interpreting data on partial discharge statistics,” IEEE Trans. Elect. Insul. 28 (6), pp. 905–916.
98. L., Satish and W., Zaengl. (1995). “Can fractal features be used for recognizing 3-d partial discharge patterns,” IEEE Trans. Dielect. Electr. Insul. 2 (3), pp. 352–359.
99. A., Krivda, E., Gulski, L., Satish, and W., Zaengl. (1995). “The use of fractal features for recognition of 3-D discharge patterns,” IEEE Trans. Dielect. Electr. Insul. 2 (5), pp. 889–892.
100. E., Lalitha and L., Satish. (1998). “Fractal image compression for classification of PD sources,” IEEE Trans. Dielect. Electr. Insul. 5 (4), pp. 550–557.
101. T., Abdel-Galil, Y., Hegazy, M., Salama and R., Bartnikas. (2004). “Partial discharge pulse pattern recognition using hidden markov models,” IEEE Trans. Dielect. Electr. Insul. 11 (4), pp. 715–723.
102. L., Satish and B., Gururaj. (1993). “Use of hidden markov models for partial discharge pattern classification,” IEEE Trans. Elect. Insul. 28 (2), pp. 172–182.
103. T., Abdel-Galil, R., Sharkawy, M., Salama and R., Bartnikas. (2005). “Partial discharge pulse pattern recognition using an inductive inference algorithm,” IEEE Trans. Dielect. Electr. Insul. 12 (2), pp. 320–327.
104. L., Hao and P., Lewin. (2010). “Partial discharge source discrimination using a support vector machine,” IEEE Trans. Dielect. Electr. Insul. 17 (1), pp. 189–97.
105. K., Lai, B., Phung and T., Blackburn. (2010). “Application of data mining on partial discharge Part I: predictive modelling classification,” IEEE Trans. Dielect. Electr. Insul. 17 (3), pp. 846–854.
106. X., Wang, B., Li, Z., Liu, H., Roman, O., Russo, K., Chin and K., Farmer. (2006). “Analysis of partial discharge signal using the Hilbert-Huang transform,” IEEE Trans. Power Deliv. 21 (3), pp. 1063–1067.
107. T., Boczar and D., Zmarz. (2004). “Application of wavelet analysis to acoustic emission pulses generated by partial discharges,” IEEE Trans. Dielect. Electr. Insul. 11 (3), pp. 433–449.
108. T., Boczar, S., Borucki, A., Cichon and D., Zmarzly. (2009). “Application possibilities of artificial neural networks for recognizing partial discharges measured by the acoustic emission method,” IEEE Trans. Dielect. Electr. Insul. 16 (1), pp. 214–223.
109. J., Li, C., Sun, S., Grzybowski, and C., Taylor. (2006). “Partial discharge image recognition using a new group of features,” IEEE Trans. Dielect. Electr. Insul. 13 (6), pp. 1245–1253.
110. T., Babnik, R. K., Aggarwal and P. J., Moore. (2008). “Principal component and hierarchical cluster analyses as applied to transformer partial dis- charge data with particular reference to trans- former condition monitoring,” IEEE Trans. Power Deliv. 23 (4), pp. 2008–2016.
111. M., Judd and L., Yang. (2003). “Recognising multiple partial discharge sources in power transformers by wavelet analysis of UHF signals,” IEE Proc. Sci. Meas. Technol. 150 (3), pp. 119–127.
112. K., Raja, F., Devaux, and S., Lelaidier. (2002). “Recognition of discharge sources using UHF PD signatures,” IEEE Electr. Insul. Mag. 18 (5), pp. 8–14.
113. R., Sharkawy, R., Mangoubi, T., Abdel-Galil, M., Salama and R., Bartnikas. (2007). “SVM classification of contaminating particles in liquid di- electrics using higher order statistics of electrical and acoustic PD measurements,” IEEE Trans. Dielect. Electr. Insul. 14 (3), pp. 669–678.
114. T., Hong, M., Fang, and D., Hilder. (1996). “PD classification by a modular neural network based on task decomposition,” IEEE Trans. Dielect. Electr. Insul. 3 (2), pp. 207–212.
115. R., Sharkawy, T., Abdel-Galil, R., Mangoubi, M., Salama and R., Bartnikas. (2008). “Particle identification in terms of acoustic partial discharge measurements in transformer oils,” IEEE Trans. Dielect. Electr. Insul. 15 (6), pp. 1649–1656.
116. S., Biswas, D., Dey, B., Chatterjee and S., Chakravorti. (2013). “An approach based on rough set theory for identification of single and multiple partial discharge source,” Int. J. Electr. Power Energy Syst. 46, pp. 163–174.
117. R., Van Brunt. (1991). “Stochastic properties of partial-discharge phenomena,” IEEE Trans. Elect. Insul. 26 (5), pp. 902–948.