A Review to the Laser Cladding of Self-Lubricating Composite Coatings

Lasers in Manufacturing and Materials Processing

Volumn 3, Issue 2, 2016, Pages 67-99

  Quazi, M M ^a   Fazal, M A ^a   Haseeb, A S M A ^a   Yusof, Farazila ^a   Masjuki, H H ^a   Arslan, A ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

Author keywords

Friction; Laser cladding; Solid lubricants; Surfaces; Wear

Indexed keywords

EID: 85014921629     PISSN: 21967229     EISSN: 21967237     Source Type: Journal    
DOI: 10.1007/s40516-016-0025-8     Document Type: Review

References (124)

1. Ahmed, A., Masjuki, H.H., Varman, M., Kalam, M.A., Habibullah, M., Al Mahmud, K.A.H.: An overview of geometrical parameters of surface texturing for piston/cylinder assembly and mechanical seals. Meccanica 51(1), 9–23 (2015). doi:10.1007/s11012-015-0180-6
2. Miyoshi, K.: Solid lubricants and coatings for extreme environments: state-of-the-art survey. (2007)
3. Sexton, L., Lavin, S., Byrne, G., Kennedy, A.: Laser cladding of aerospace materials. J. Mater. Process. Technol. 122(1), 63–68 (2002)
4. Kathuria, Y.P.: Some aspects of laser surface cladding in the turbine industry. Surf. Coat. Technol. 132(2), 262–269 (2000)
5. Renevier, N.M., Hamphire, J., Fox, V.C., Witts, J., Allen, T., Teer, D.G.: Advantages of using self-lubricating, hard, wear-resistant MoS2-based coatings. Surf. Coat. Technol. 142–144, 67–77 (2001). doi:10.1016/S0257-8972(01)01108-2
6. Chen, X., Peng, Z., Yu, X., Fu, Z., Yue, W., Wang, C.: Microstructure and tribological performance of self-lubricating diamond/tetrahedral amorphous carbon composite film. Appl. Surf. Sci. 257(8), 3180–3186 (2011). doi:10.1016/j.apsusc.2010.10.136
7. Lian, Y., Deng, J., Li, S., Yan, G., Lei, S.: Friction and wear behavior of WS2/Zr self-lubricating soft coatings in dry sliding against 40Cr-hardened steel balls. Tribol. Lett. 53(1), 237–246 (2013). doi:10.1007/s11249-013-0261-4
8. Sahoo, P., Das, S.K.: Tribology of electroless nickel coatings – A review. Mater. Des. 32(4), 1760–1775 (2011). doi:10.1016/j.matdes.2010.11.013
9. Gan, J.A., Berndt, C.C.: Nanocomposite coatings: thermal spray processing, microstructure and performance. Int. Mater. Rev. 60(4), 195–244 (2015). doi:10.1179/1743280414Y.0000000048
10. Wang, W.: Application of a high temperature self-lubricating composite coating on steam turbine components. Surf. Coat. Technol. 177–178, 12–17 (2004). doi:10.1016/j.surfcoat.2003.06.025
11. Tudela, I., Zhang, Y., Pal, M., Kerr, I., Cobley, A.J.: Ultrasound-assisted electrodeposition of thin nickel-based composite coatings with lubricant particles. Surf. Coat. Technol. 276, 89–105 (2015). doi:10.1016/j.surfcoat.2015.06.030
12. Deuis, R.L., Yellup, J.M., Subramanian, C.: Metal-matrix composite coatings by PTA surfacing. Compos. Sci. Technol. 58(2), 299–309 (1998). doi:10.1016/S0266-3538(97)00131-0
13. Quazi, M., Fazal, M., Haseeb, A., Yusof, F., Masjuki, H., Arslan, A.: Laser-based surface modifications of aluminum and its alloys. Crit. Rev. Solid State Mater. Sci. 1–26 (2015)
14. Liu, S., Zhang, Y., Kovacevic, R.: Numerical simulation and experimental study of powder flow distribution in high power direct diode laser cladding process. Lasers Manuf. Mater. Process. 2(4), 199–218 (2015). doi:10.1007/s40516-015-0015-2
15. Dubourg, L., Archambeault, J.: Technological and scientific landscape of laser cladding process in 2007. Surf. Coat. Technol. 202(24), 5863–5869 (2008)
16. Bordeasu, I., Popoviciu, M.O., Micu, L.M., Oanca, O.V., Bordeasu, D., Pugna, A., Bordeasu, C.: Laser beam treatment effect on AMPCO M4 bronze cavitation erosion resistance. In: IOP Conference Series: Materials Science and Engineering 2015, p. 012005. IOP Publishing
17. Polcar, T., Cavaleiro, A.: Review on self-lubricant transition metal dichalcogenide nanocomposite coatings alloyed with carbon. Surf. Coat. Technol. 206(4), 686–695 (2011). doi:10.1016/j.surfcoat.2011.03.004
18. Vilar, R.: Laser alloying and laser cladding. In: Materials Science Forum, pp. 229–252. Trans Tech Publ, (1999)
19. Watkins, K.G., McMahon, M.A., Steen, W.M.: Microstructure and corrosion properties of laser surface processed aluminium alloys: a review. Mater. Sci. Eng. A 231(1), 55–61 (1997)
20. Leyland, A., Matthews, A.: On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour. Wear 246(1–2), 1–11 (2000). doi:10.1016/S0043-1648(00)00488-9
21. Milella, E., Cosentino, F., Licciulli, A., Massaro, C.: Preparation and characterisation of titania/hydroxyapatite composite coatings obtained by sol–gel process. Biomaterials 22(11), 1425–1431 (2001). doi:10.1016/S0142-9612(00)00300-8
22. Wang, K.L., Zhu, Y.M., Steen, W.M.: Laser remelting of plasma sprayed coatings. J. Laser Appl. 12(4), 175–178 (2000). doi:10.2351/1.521930
23. Liu, X.-B., Meng, X.-J., Liu, H.-Q., Shi, G.-L., Wu, S.-H., Sun, C.-F., Wang, M.-D., Qi, L.-H.: Development and characterization of laser clad high temperature self-lubricating wear resistant composite coatings on Ti–6Al–4 V alloy. Mater. Des. 55, 404–409 (2014)
24. Singh, A., Harimkar, S.P.: Laser surface engineering of magnesium alloys: a review. Jom 64(6), 716–733 (2012)
25. Praveen, B.M., Venkatesha, T.V.: Electrodeposition and properties of Zn-nanosized TiO2 composite coatings. Appl. Surf. Sci. 254(8), 2418–2424 (2008). doi:10.1016/j.apsusc.2007.09.047
26. Weng, F., Chen, C., Yu, H.: Research status of laser cladding on titanium and its alloys: a review. Mater. Des. 58, 412–425 (2014)
27. Farahmand, P., Kovacevic, R.: Parametric study and multi-criteria optimization in laser cladding by a high power direct diode laser. Lasers Manuf. Mater. Process. 1(1), 1–20 (2014). doi:10.1007/s40516-014-0001-0
28. Holmberg, K.: A concept for friction mechanisms of coated surfaces. Surf. Coat. Technol. 56(1), 1–10 (1992)
29. Kato, K.: Wear in relation to friction — a review. Wear 241(2), 151–157 (2000). doi:10.1016/S0043-1648(00)00382-3
30. Aouadi, S.M., Gao, H., Martini, A., Scharf, T.W., Muratore, C.: Lubricious oxide coatings for extreme temperature applications: a review. Surf. Coat. Technol. 257, 266–277 (2014)
31. Arslan, A., Masjuki, H.H., Varman, M., Kalam, M.A., Quazi, M.M., Al Mahmud, K.A.H., Gulzar, M., Habibullah, M.: Effects of texture diameter and depth on the tribological performance of DLC coating under lubricated sliding condition. Appl. Surf. Sci. 356, 1135–1149 (2015). doi:10.1016/j.apsusc.2015.08.194
32. Bao, R., Yu, H., Chen, C., Dong, Q.: The effect of rare earth on the structure and performance of laser clad coatings. Surf. Rev. Lett. 13(04), 509–517 (2006). doi:10.1142/S0218625X0600875X
33. Zhong, M., Liu, W.: Laser surface cladding: the state of the art and challenges. Proc. Inst. Mech. Eng. Part C: J. Mech. Eng. Sci. 224(5), 1041–1060 (2010)
34. Bergmann, H.W., Mordike, B.L.: Laser surface melting. NASA STI/Recon Tech. Rep. N 88, 21435 (1986)
35. Mondal, S., Bandyopadhyay, A., Pal, P.: Application of artificial neural network for the prediction of laser cladding process characteristics at Taguchi-based optimized condition. Int. J. Adv. Manuf. Technol. 70(9–12), 2151–2158 (2014). doi:10.1007/s00170-013-5393-z
36. Draper, C.W., Poate, J.M.: Laser surface alloying. Int. Metals Rev. 30(1), 85–108 (1985)
37. Mahamood, R.M., Akinlabi, E.T., Akinlabi, S.: Laser power and scanning speed influence on the mechanical property of laser metal deposited titanium-alloy. Lasers Manuf. Mater. Process. 2(1), 43–55 (2014). doi:10.1007/s40516-014-0003-y
38. Reeves, C.J., Menezes, P.L., Lovell, M.R., Jen, T.-C.: Tribology of Solid Lubricants. In: Tribology for Scientists and Engineers. pp. 447–494. Springer, (2013)
39. Yang, H.Z., Qiao, X.G., Wang, Y.P., Ali, M.M., Lai, M.H., Lim, K.S., Ahmad, H.: In-fiber gratings for simultaneous monitoring temperature and strain in ultrahigh temperature. Photon. Technol. Lett., IEEE 27(1), 58–61 (2015)
40. Scharf, T.W., Prasad, S.V.: Solid lubricants: a review. J. Mater. Sci. 48(2), 511–531 (2013). doi:10.1007/s10853-012-7038-2
41. Roberts, E.W.: Space tribology: its role in spacecraft mechanisms. J. Phys. D Appl. Phys. 45(50), 503001 (2012)
42. Kawasaki, M., Mori, K., Takagi, S., Ueda, K.: Aluminum alloy cylinder head with valve seat formed integrally by copper alloy cladding layer and underlying alloy layer. In. Patent No. US06944850, (1988)
43. Adachi, S., Inami, J.: Valve seat-bonded cylinder head and method for producing same. In. Patent No. US5742020 A, (1998)
44. Kawasaki, M., Oshima, T., Kobayashi, T., Nakanishi, K., Tachikawa, H.: Wear-resistant copper-based alloy. In. Patent No. US7507305 B2, (2009)
45. Kawasaki, M., Kobayashi, T., Oshima, T.: Wear-resistant copper-base alloy. In. Patent No. US20040045641 A1, (2004)
46. Sawada, T., Yanagitani, A., Fukumoto, S., Okita, T., Tsuyumu, T., Asami, M., Matsuo, N., Matsuki, S., Tsujii, Y.: Raw material powder for laser clad valve seat and valve seat using the same. In. Patent No. US11881396, (2008)
47. Vigneau, J., Lesnevskiy, L., Troshin, A.: Method of protecting contacting surfaces between two metal parts benefiting from such protection. In. Patent No. US11/171,324, (2006)
48. Herbst-Dederichs, C.: Thermally applied coating of mechanically alloyed powders for piston rings. In. Patent No. US6887585 B2, (2005)
49. Doll, G.L., Evans, R.D., Ribaudo, C.R.: Coated rolling element bearing cages. In. Patent No. US6994475 B2, (2006)
50. Ecer, G.M.: Composite bearing structure of alternating hard and soft metal, and process for making the same. In. Patent No. US4474861 A, (1984)
51. Arato, T., Aono, Y., Tsuruoka, S., Komuro, K.: Ceramic-particle-dispersed metallic member, manufacturing method of same and use of same. In. Patent No. US5589652 A, (1996)
52. McCrea, J., Katugaha, H., Palumbo, G., Panagiotopoulos, K., Brooks, I., Nagarajan, N., Hirmer, G.: Metal-clad hybrid article having synergistic mechanical properties. In. Patent No. US20140004352 A1, (2014)
53. Jin, H.W., Rajagopalan, S., Ozekcin, A., Haque, T., Ertas, M.D., Zhao, B., Bailey, J.R., Walker, T.F.: Ultra-low friction coatings for drill stem assemblies. In. Patent No. US8561707 B2, (2013)
54. Scruggs, D.M.: Materials transformable from the nonamorphous to the amorphous state under frictional loadings. In. Patent No. US4725512 A, (1988)
55. Bose, S., Bandyopadhyay, A.: Wear resistant low friction coefficient surfaces for joint and bone replacement materials and devices. In. Patent No. US20150004209 A1, (2015)
56. Zhang, S.H., Li, M.X., Cho, T.Y., Yoon, J.H., Lee, C.G., He, Y.Z.: Laser clad Ni-base alloy added nano- and micron-size CeO2 composites. Optics Laser Technol. 40(5), 716–722 (2008). doi:10.1016/j.optlastec.2007.10.007
57. Masanta, M., Ganesh, P., Kaul, R., Nath, A.K., Roy Choudhury, A.: Development of a hard nano-structured multi-component ceramic coating by laser cladding. Mater. Sci. Eng. A 508(1–2), 134–140 (2009). doi:10.1016/j.msea.2008.12.031
58. Chen, J.L., Li, J., Song, R., Bai, L.L., Shao, J.Z., Qu, C.C.: Effect of the scanning speed on microstructural evolution and wear behaviors of laser cladding NiCrBSi composite coatings. Optics Laser Technol. 72, 86–99 (2015). doi:10.1016/j.optlastec.2015.03.015
59. Lei, Y., Sun, R., Tang, Y., Niu, W.: Microstructure and phase transformations in laser clad CrxSy/Ni coating on H13 steel. Opt. Lasers Eng. 66, 181–186 (2015). doi:10.1016/j.optlaseng.2014.09.006
60. Shukla, P.P., Lawrence, J.: Characterization and compositional study of a ZrO2 engineering ceramic irradiated with a fibre laser beam. Optics Laser Technol. 43(7), 1292–1300 (2011). doi:10.1016/j.optlastec.2011.03.026
61. del Val, J., Comesaña, R., Lusquiños, F., Boutinguiza, M., Riveiro, A., Quintero, F., Pou, J.: Laser cladding of Co-based superalloy coatings: Comparative study between Nd:YAG laser and fibre laser. Surf. Coat. Technol. 204(12–13), 1957–1961 (2010). doi:10.1016/j.surfcoat.2009.11.036
62. Yang, R., Liu, Z., Wang, Y., Yang, G., Li, H.: Synthesis and characterization of MoS2/Ti composite coatings on Ti6Al4V prepared by laser cladding. AIP Advances 3(2), 022106 (2013)
63. Pereira, J.C., Zambrano, J.C., Tobar, M.J., Yañez, A., Amigó, V.: High temperature oxidation behavior of laser cladding MCrAlY coatings on austenitic stainless steel. Surf. Coat. Technol. 270, 243–248 (2015). doi:10.1016/j.surfcoat.2015.02.050
64. Pariona, M.M., Teleginski, V., Santos, K., dos Santos, E.L.R., de Lima, A.A.O.C., Riva, R.: AFM study of the effects of laser surface remelting on the morphology of Al–Fe aerospace alloys. Mater Charact 74, 64–76 (2012)
65. Avril, L., Courant, B., Hantzpergue, J.J.: Tribological performance of α-Fe(Cr)-Fe2B-FeB and α-Fe(Cr)-h-BN coatings obtained by laser melting. Wear 260(4–5), 351–360 (2006). doi:10.1016/j.wear.2005.04.012
66. Liu, X.-B., Zheng, C., Liu, Y.-F., Fan, J.-W., Yang, M.-S., He, X.-M., Wang, M.-D., Yang, H.-B., Qi, L.-H.: A comparative study of laser cladding high temperature wear-resistant composite coating with the addition of self-lubricating WS2 and WS2/(Ni–P) encapsulation. J. Mater. Process. Technol. 213(1), 51–58 (2013). doi:10.1016/j.jmatprotec.2012.07.017
67. Chatterjee, S., Majumdar, J.D., Shariff, S.M., Padmanabham, G., Choudhury, A.R.: Effect of laser post-treatment on Al2O3-TiB2-TiN composite coating with free hBN. Int. J. Adv. Manuf. Technol. 61(5–8), 559–567 (2012)
68. Zhang, S., Zhou, J., Guo, B., Zhou, H., Pu, Y., Chen, J.: Friction and wear behavior of laser cladding Ni/hBN self-lubricating composite coating. Mater. Sci. Eng. A 491(1–2), 47–54 (2008). doi:10.1016/j.msea.2007.12.015
69. Erdemir, A.: Review of engineered tribological interfaces for improved boundary lubrication. Tribol. Int. 38(3), 249–256 (2005)
70. Donnet, C., Erdemir, A.: Solid lubricant coatings: recent developments and future trends. Tribol. Lett. 17(3), 389–397 (2004)
71. Courant, B., Hantzpergue, J.J., Benayoun, S.: Surface treatment of titanium by laser irradiation to improve resistance to dry-sliding friction. Wear 236(1), 39–46 (1999)
72. Wang, Y., Li, G., Shi, Z., Liu, M., Zhang, X., Liu, Y.: Effects of graphite addition on the microstructure and properties of laser cladding Zr–Al–Ni–Cu amorphous coatings. J. Alloys Compd. 610, 713–717 (2014)
73. Choudhury, A.R., Ezz, T., Chatterjee, S., Li, L.: Microstructure and tribological behaviour of nano-structured metal matrix composite boride coatings synthesized by combined laser and sol–gel technology. Surf. Coat. Technol. 202(13), 2817–2829 (2008)
74. Yang, J.X., Wang, Z.C., Miao, X.H., Wang, X.B.: Microstructure and tribological properties of self-lubricating graphite/Ni60 composite coatings prepared by laser cladding. Adv. Mater. Res. 583, 27–31 (2012)
75. Xu, J., Liu, W., Zhong, M.: Microstructure and dry sliding wear behavior of MoS2/TiC/Ni composite coatings prepared by laser cladding. Surf. Coat. Technol. 200(14–15), 4227–4232 (2006). doi:10.1016/j.surfcoat.2005.01.036
76. Niu, W., Sun, R., Lei, Y.: Microstructure and wear properties of self-lubricating MoS2/Ni coating by laser cladding. In: Electronics and Optoelectronics (ICEOE), 2011 International Conference on 2011, pp. V2-321-V322-324. IEEE
77. Han, B., Xue, M.P., Wang, Y., Yu, M.F.: Influence of MoS2 on the microstructures and properties of Ni-based alloying coating. Appl. Mech. Mater. 130, 1276–1280 (2012)
78. Yang, M.-S., Liu, X.-B., Fan, J.-W., He, X.-M., Shi, S.-H., Fu, G.-Y., Wang, M.-D., Chen, S.-F.: Microstructure and wear behaviors of laser clad NiCr/Cr3C2–WS2 high temperature self-lubricating wear-resistant composite coating. Appl. Surf. Sci. 258(8), 3757–3762 (2012). doi:10.1016/j.apsusc.2011.12.021
79. Liu, X.-B., Liu, H.-Q., Meng, X.-J., Sun, C.-F., Wang, M.-D., Qi, L.-H., Shi, G.-L., Wu, S.-H.: Effects of aging treatment on microstructure and tribological properties of nickel-based high-temperature self-lubrication wear resistant composite coatings by laser cladding. Mater. Chem. Phys. 143(2), 616–621 (2014). doi:10.1016/j.matchemphys.2013.09.043
80. Yan, H., Wang, A.H., Zhang, X.L., Huang, Z.W., Wang, W.Y., Xie, J.P.: Nd: YAG laser cladding Ni base alloy/nano-h-BN self-lubricating composite coatings. Mater. Sci. Technol. 26(4), 461–468 (2010)
81. Fouilland-Paille, L., Ettaqi, S., Benayoun, S., Hantzpergue, J.J.: Structural and mechanical characterization of Ti/TiC cermet coatings synthesized by laser melting. Surf. Coat. Technol. 88(1–3), 204–211 (1997). doi:10.1016/S0257-8972(96)02925-8
82. Courant, B., Hantzpergue, J.J., Avril, L., Benayoun, S.: Structure and hardness of titanium surfaces carburized by pulsed laser melting with graphite addition. J. Mater. Process. Technol. 160(3), 374–381 (2005). doi:10.1016/j.jmatprotec.2004.06.025
83. Ying, L.X., Jiang, L.D., Kong, F.K., Yang, E.X.: Study on laser cladding coatings of Ni-based alloy/TiC/nickel-coated graphite on steel substrate. Key Eng. Mater. 450, 214–218 (2011)
84. Tian, Y.S., Chen, C.Z., Chen, L.X., Huo, Q.H.: Microstructures and wear properties of composite coatings produced by laser alloying of Ti–6Al–4 V with graphite and silicon mixed powders. Mater. Lett. 60(1), 109–113 (2006). doi:10.1016/j.matlet.2005.07.082
85. Zhang, H.X., Yu, H.J., Chen, C.Z.: In-situ forming composite coating by laser cladding C/B4C. Mater. Manuf. Process. 30(6), 743–747 (2014). doi:10.1080/10426914.2014.994772
86. Gopagoni, S., Scharf, T.W., Banerjee, R., Tiley, J.S.: Solid lubricating, hard and fracture resistant composites for surface engineering applications. In. Patent No. US3/769,787, (2013)
87. Denney, P.E., Whitehead, M.: Hot-wire consumable to provide self-lubricating weld or clad. In. Patent No. US13/790,202, (2014)
88. Spalvins, T.: A review of recent advances in solid film lubrication. J Vac. Sci. Technol. A 5(2), 212–219 (1987)
89. Prasad, S.V., McDevitt, N.T., Zabinski, J.S.: Tribology of tungsten disulfide films in humid environments: the role of a tailored metal-matrix composite substrate. Wear 230(1), 24–34 (1999). doi:10.1016/S0043-1648(99)00082-4
90. He, X.-M., Liu, X.-B., Wang, M.-D., Yang, M.-S., Shi, S.-H., Fu, G.-Y., Chen, S.-F.: Elevated temperature dry sliding wear behavior of nickel-based composite coating on austenitic stainless steel deposited by a novel central hollow laser cladding. Appl. Surf. Sci. 258(1), 535–541 (2011)
91. Sateesh, N.H., Kumar, G.C.M., Krishna, P.: Influence of Ni-P coated SiC and laser scan speed on the microstructure and mechanical properties of IN625 metal matrix composites. Lasers Manuf. Mater. Process. 2(4), 187–198 (2015). doi:10.1007/s40516-015-0014-3
92. Kimura, Y., Wakabayashi, T., Okada, K., Wada, T., Nishikawa, H.: Boron nitride as a lubricant additive. Wear 232(2), 199–206 (1999)
93. Kostoglou, N., Polychronopoulou, K., Rebholz, C.: Thermal and chemical stability of hexagonal boron nitride (h-BN) nanoplatelets. Vacuum 112, 42–45 (2015). doi:10.1016/j.vacuum.2014.11.009
94. Podgornik, B., Kosec, T., Kocijan, A., Donik, Č.: Tribological behaviour and lubrication performance of hexagonal boron nitride (h-BN) as a replacement for graphite in aluminium forming. Tribol. Int. 81, 267–275 (2015). doi:10.1016/j.triboint.2014.09.011
95. Eichler, J., Lesniak, C.: Boron nitride (BN) and BN composites for high-temperature applications. J. Eur. Ceram. Soc. 28(5), 1105–1109 (2008). doi:10.1016/j.jeurceramsoc.2007.09.005
96. Niu, W., Sun, R.L., Lei, Y.W.: Effect of H-BN content on microstructures of the laser cladding self-lubricant coatings. Adv. Mater. Res. 154, 609–612 (2011)
97. Yakovlev, A., Bertrand, P., Smurov, I.: Laser cladding of wear resistant metal matrix composite coatings. Thin Solid Films 453–454, 133–138 (2004). doi:10.1016/j.tsf.2003.11.085
98. Guo, C., Zhou, J., Zhao, J., Guo, B., Yu, Y., Zhou, H., Chen, J.: Microstructure and friction and wear behavior of laser boronizing composite coatings on titanium substrate. Appl. Surf. Sci. 257(9), 4398–4405 (2011). doi:10.1016/j.apsusc.2010.12.070
99. Zhang, S., Zhou, J., Guo, B., Zhou, H., Pu, Y., Chen, J.: Friction and wear behavior of laser cladding NiAl/hBN self-lubricating composite coating. In: Advanced Tribology. pp. 442–442. Springer, (2010)
100. Wang, L., Wang, B., Wang, X., Liu, W.: Tribological investigation of CaF2 nanocrystals as grease additives. Tribol. Int. 40(7), 1179–1185 (2007). doi:10.1016/j.triboint.2006.12.003
101. Liu, X.-B., Shi, S.-H., Guo, J., Fu, G.-Y., Wang, M.-D.: Microstructure and wear behavior of γ/Al4C3/TiC/CaF2 composite coating on γ-TiAl intermetallic alloy prepared by Nd:YAG laser cladding. Appl. Surf. Sci. 255(11), 5662–5668 (2009). doi:10.1016/j.apsusc.2008.11.023
102. Xiang, Z.-F., Liu, X.-B., Ren, J., Luo, J., Shi, S.-H., Chen, Y., Shi, G.-L., Wu, S.-H.: Investigation of laser cladding high temperature anti-wear composite coatings on Ti6Al4V alloy with the addition of self-lubricant CaF2. Appl. Surf. Sci. 313, 243–250 (2014). doi:10.1016/j.apsusc.2014.05.196
103. Liu, W.-G., Liu, X.-B., Zhang, Z.-G., Guo, J.: Development and characterization of composite Ni–Cr–C–CaF2 laser cladding on γ-TiAl intermetallic alloy. J. Alloys Compd. 470(1–2), L25–L28 (2009). doi:10.1016/j.jallcom.2008.03.020
104. Wang, H.M., Yu, Y.L., Li, S.Q.: Microstructure and tribological properties of laser clad CaF2/Al2O3 self-lubrication wear-resistant ceramic matrix composite coatings. Scr. Mater. 47(1), 57–61 (2002). doi:10.1016/S1359-6462(02)00086-6
105. Yan, H., Zhang, J., Zhang, P., Yu, Z., Li, C., Xu, P., Lu, Y.: Laser cladding of Co-based alloy/TiC/CaF2 self-lubricating composite coatings on copper for continuous casting mold. Surf. Coat. Technol. 232, 362–369 (2013). doi:10.1016/j.surfcoat.2013.05.036
106. Yan, H., Zhang, P., Yu, Z., Lu, Q., Yang, S., Li, C.: Microstructure and tribological properties of laser-clad Ni–Cr/TiB2 composite coatings on copper with the addition of CaF2. Surf. Coat. Technol. 206(19–20), 4046–4053 (2012). doi:10.1016/j.surfcoat.2012.03.086
107. Chao, M.-J., Liang, E.-J.: Effect of TiO2-doping on the microstructure and the wear properties of laser-clad nickel-based coatings. Surf. Coat. Technol. 179(2–3), 265–271 (2004). doi:10.1016/S0257-8972(03)00857-0
108. DellaCorte, C., Wood, J.C.: High temperature solid lubricant materials for heavy duty and advanced heat engines. (1994)
109. Bi, Q., Zhu, S., Liu, W.: High temperature self-lubricating materials. Tribol. Eng. 1, 109–133 (2013)
110. Wang, L., Zhou, J., Yu, Y., Guo, C., Chen, J.: Effect of powders refinement on the tribological behavior of Ni-based composite coatings by laser cladding. Appl. Surf. Sci. 258(17), 6697–6704 (2012)
111. Arslan, A., Masjuki, H., Varman, M., Kalam, A., Mufti, R., Gulzar, M., Quazi, M.: Effect of surface texture on the tribological performance of DLC coating. Proc. Malays. Int. Tribol. Conf. 2015(2015), 246–247 (2015)
112. Chen, Y., Wu, D., Ma, G., Lu, W., Guo, D.: Coaxial laser cladding of Al2O3-13 % TiO2 powders on Ti-6Al-4 V alloy. Surf. Coat. Technol. 228, S452–S455 (2013)
113. Gardos, M.N.: Magnéli phases of anion-deficient rutile as lubricious oxides. Part I. Tribological behavior of single-crystal and polycrystalline rutile (Ti n O2n − 1). Tribol. Lett. 8(2–3), 65–78 (2000)
114. Berger, L.M., Thiele, S., Nebelung, M.: Coating powder based on chemically modified titanium suboxides. In. Patent No.US20040136898 A1, (2004)
115. Berger, L.M., Thiele, S., Nebelung, M.: Coating powder of Cr or V doped titanium suboxides. In. Patent No. US7445763 B2, (2008)
116. Liu, X.-B., Liu, H.-Q., Liu, Y.-F., He, X.-M., Sun, C.-F., Wang, M.-D., Yang, H.-B., Qi, L.-H.: Effects of temperature and normal load on tribological behavior of nickel-based high temperature self-lubricating wear-resistant composite coating. Compos. Part B: Eng. 53, 347–354 (2013). doi:10.1016/j.compositesb.2013.05.032
117. Wang, A.H., Zhang, X.L., Zhang, X.F., Qiao, X.Y., Xu, H.G., Xie, C.S.: Ni-based alloy/submicron WS2 self-lubricating composite coating synthesized by Nd:YAG laser cladding. Mater. Sci. Eng. A 475(1–2), 312–318 (2008). doi:10.1016/j.msea.2007.04.087
118. Zhu, L., Luo, L., Wu, Y., Cheng, J.: Microstructure and tribological properties of laser clad Ni-Ag/Tic composite coating. J. Wuhan Univ Technol-Mater. Sci. Ed. 29(2), 242–245 (2014). doi:10.1007/s11595-014-0901-z
119. Blum, R., Molian, P.: CO2 laser coating of nanodiamond on aluminum using an annular beam. Appl. Surf. Sci. 288, 1–8 (2014)
120. Tyagi, R., Xiong, D., Li, J.: Effect of load and sliding speed on friction and wear behavior of silver/h-BN containing Ni-base P/M composites. Wear 270(7–8), 423–430 (2011). doi:10.1016/j.wear.2010.08.013
121. Donnet, C., Erdemir, A.: Historical developments and new trends in tribological and solid lubricant coatings. Surf. Coat. Technol. 180, 76–84 (2004)
122. Chen, S.F., Feng, C.L., Yang, J., Chen, J.S.: Experimental research on the friction and wear properties of ni-based composite coating prepared by laser cladding. In: Materials Science Forum, pp. 152–157. Trans Tech Publ, (2013)
123. Guo, D., Xie, G., Luo, J.: Mechanical properties of nanoparticles: basics and applications. J. Phys. D Appl. Phys. 47(1), 013001 (2014)
124. Belanger, P.-A., Rioux, M.: Ring pattern of a lens-axicon doublet illuminated by a Gaussian beam. Appl. Optics 17(7), 1080–1088 (1978)