Theory and Design of CNC Systems

Springer Series in Advanced Manufacturing

Volumn , Issue , 2008, Pages 1-447

  Suh, Suk Hwan ^a   Kang, Seong Kyoon ^c   Chung, Dae Hyuk ^b   Stroud, Ian ^d  

^a Pohang University of Science and Technology (POSTECH)   (South Korea)

^b Doosan Infracore Co Ltd   (South Korea)

^c K S International Patent and Law Firm   (South Korea)

^d EPFL   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84978885590     PISSN: 18605168     EISSN: 21961735     Source Type: Book Series    
DOI: None     Document Type: Chapter

References (164)

1. Altintas, Y., Munasinghe, W. K. “A Hierarchical Open-Architecture CNC System for Machine Tools”, Annals of CIRP, Vol. 43/1, pp. 349–354, 1994.
2. Altintas, Y., Erol, N. A. “Open Architecture Modular Tool Kit for Motion and Machining Process Control”, Annals of CIRP, Vol. 47/1, pp. 295–300, 1998.
3. Aronsoon, R. B. “Machine tool 101: part 1, trends”, Manufacturing engineering, pp. 31–36, January 1994.
4. Aronsoon, R. B. “Machine tool 101: part 5, controls”, Manufacturing engineering, pp. 53–57, May 1994.
5. Åström, K. J., Hägglund, T. “Automatic Tuning of Simple Regulators with Specifications on Phase and Amplitude Margins”, Automatica, Vol. 20, No. 5, pp. 646–651, 1984.
6. Auslander, D. M., Tham, C. H. “Real-Time Software for Control”, Prentice Hall, Upper Saddle River, NJ, 1990.
7. Babb, M. “IEC 1131-3: A Standard Programming Resource for PLCs”, Control Engineering, pp. 67–76, February 1996.
8. Bollinger, J. G., Duffie, N. A. “Computer Control of Machines and Processes”, Addison Wesley, Boston, MA., 1989.
9. Brecher, C., Voss, M., Almeida, C. “Component-based Open Control Systems using Open Source Software”, Proceedings Third CIRP International Conference on Reconfigurable Manufacturing Systems, May 2005.
10. Brouer, N., Weck, M. “Feature-Oriented Programming Interface of an Autonomous Production Cell”, Fourth IFAC Workshop, pp. 223–228, 1997.
11. Chang, C. H., Melkanoff, M. A. “NC Machine Programming and Software Design”, Prentice Hall, Upper Saddle River, NJ., 1989.
12. Chang, H., Lee, K. “Design and implementation of real time multitasking kernel under DOS environment”, Journal of Korean Automatic Control and System Engineering, Vol. 3, No. 4, pp. 373–380, 1997.
13. Choi, I., Suh, S., Kim, K., Song, M., Jang, M., Lee, B. “Development process and data management of TurnSTEP: a STEP-compliant CNC system for turning”, International Journal of Computer Integrated Manufacturing, Vol. 19, No. 6, pp. 546–558, 2006.
14. Chon, D., Kim, H. “Generating velocity profile for NURBS curve by look-ahead method”, Proceedings Fall Conference of KSPE, pp. 977–980, 1997.
15. Chung, C., Lee, K., Lee, B. “Software design and implementation for robot controller based on real time operating system”, Proceedings Conference of KACC, pp. 1246–1251, 1994.
16. Chu, J., Lee, H., Lee, Y., Jun, K. “A new contour error modeling method for cross coupling control”, Journal of Control, Automation and System Engineering, Vol. 3, No. 4, pp. 389– 397, 1997.
17. Comer, D., Fossum, T. V. “Operating System Design, Volume I The XINU Approach”, Prentice Hall, 1988.
18. Daihatsu Motor Company, “Method of Control of NC Machine Tools”, US patent 4445182, 1984.
19. Danielsson, P. E. “Incremental Curve Generation”, IEEE Transactions on Computers, Vol. C-19, No. 9, pp. 783–793, 1970.
20. Deitel, H. M. “An Introduction to Operating Systems”, Addison Wesley, Boston, MA., 1984.
21. Deshayes, L., Donmez, A., Welsch, L., Ivester, R. “Robust Optimization for Smart Machining Systems: An Enabler for Agile Manufacturing”, Proceedings ASME International Mechanical Engineering Congress and Exposition, November 2005.
22. Fanuc, “Method for Compensating for Servo Delay caused at an ARC or Corner”, US patent 4543625, 1985.
23. Fanuc, “Acceleration/Deceleration System for A Numerical Controller”, US patent 4652804, 1987.
24. Fanuc, “Blank Profile Specifying Method”, US patent 4669041, 1987.
25. Fanuc, “Automatic Machining Process Determination Method in an Automatic Programming System”, US patent 4723203, 1988.
26. Fanuc, “Conversational-type Programming Apparatus”, US patent 4823253, 1989.
27. Fanuc, “Automatic Programming System”, US patent 4939635, 1990.
28. Fanuc, “Acceleration/Deceleration Control Apparatus”, US patent 4994978, 1991.
29. Fanuc, “System for processing MST function command”, US patent 4982335, 1991.
30. Fanuc, “Programming method for drilling holes”, Patent applied for 92-10197, 1992.
31. Fanuc, “Part Profile Input Method”, US patent 5089950, 1992.
32. Fanuc, “Acceleration/Deceleration Control Method for A Numerical Control Device”, US patent 5218281, 1993.
33. Fanuc, “Graphic mechanism for checking interferences”, Patent applied 94-700698, 1994.
34. Fanuc, “Conversational automatic programming system”, Patent applied 94-702618, 1994.
35. Fanuc, “Numerical controller capable of estimating finishing time of machining operation”, Patent applied 94-704020, 1994.
36. Fanuc, “Feedforward control method for a servomotor”, US patent 5448145, 1995.
37. Fanuc, “Free-Form Curve Interpolation Method and Apparatus”, US patent 5815401, 1998.
38. Fanuc, “Numerical control system”, Patent applied 88-700333, 1988.
39. Fanuc, “Free Curve Interpolation Apparatus and Interpolation Method”, US patent 5936864, 1999.
40. Final Report of ESPRIT Projects 6379 & 9115, “Open system architecture for controls within automation systems: OSACA & Final report”, ESPRIT, April 1996.
41. Fujita, S., Yoshida, T., “OSEC: Open System Environment for Controller”, Proceedings Seventh International Machine Tool Engineering Conference, pp. 234–244, 1996.
42. GE Fanuc Automation North America, Inc., “Description Manual, Series 21/210-Model B”, 1996.
43. GMPTG, “Open modular architecture controls at GM POWERTRAIN-Technology and Implementation: version 1.0”, White paper downloaded from http://www.arcweb.com/omac, May 1996.
44. Hägglund, T., Åström, K. J. “Industrial Adaptive Controller Based on Frequency Response Techniques”, International Federation of Automatic Control, pp. 599–609, 1991.
45. Hardwick, M. “Justifying the STEP-NC savings”, Fourth MDICM IRB Meeting, June 2001.
46. Heusinger, S., Rosso-Jr, R., Klemm, P., Newman, S., Rahimifard, S. “Integrating the CAx process chain for STEP-compliant NC manufacturing of asymmetric parts”, International Journal of Computer Integrated Manufacturing, Vol. 19, No. 6, pp. 533–545, 2006.
47. Hughes Aircraft Company, “Robot Axis Controller Employing Feedback and Open Loop (feed forward) Control”, US patent 4912753, 1990.
48. Hurco Companies, Inc., “CNC Control System”, US patent 5453933, 1995.
49. Hyundai Motor Company, “Users’ manual for HiTROL-M100”, 2000.
50. Hyundai Motor Company, “Programming manual for HiTROL M-100”, 2000.
51. Hyundai Motor Company, “Operating manual for HiTROL M-100”, 2000.
52. Hyundai Precision Co. Ltd, “Implementation method for CNC controller using single CPU”, Korea Patent applied 99-79125, 1999.
53. Hyundai Precision Co. Ltd, “CNC controller having real time measurement capability”, Korea Patent applied 99-79804, 1999.
54. Hyundai Precision Co. Ltd, “Turning CNC with tool path generation method”, Korea Patent applied 99-74236, 1999.
55. ICOM, “Method and Apparatus for Creating Custom Displays for Monitoring Ladder Logic Programs”, US patent 4991076, 1991.
56. Im, S., Kang, S., Choi, J. “Machining cycle for rough cut and finish cut of turning operation with collision-avoidance capability”, Proceedings of Conference of KSPE, pp. 1050–1053, 1997.
57. ISO/FDIS 14649-1, “Industrial automation systems and integration – Physical device control – Data model for computerized numerical controllers – Part 1: Overview and fundamental principles”, ISO/TC 184/SC 1/WG 7, 2002.
58. ISO/FDIS 14649-10, “Industrial automation systems and integration – Physical device control – Data model for computerized numerical controllers – Part 10: General process data”, ISO/TC 184/SC 1/WG 7, 2004.
59. ISO/FDIS 14649-11, “Industrial automation systems and integration – Physical device control – Data model for computerized numerical controllers – Part 11: Process data for milling”, ISO/TC 184/SC 1/WG 7, 2004.
60. ISO/FDIS 14649-12, “Industrial automation systems and integration – Physical device control – Data model for computerized numerical controllers – Part 12: Process data for turning”, ISO/TC 184/SC 1/WG 7, 2005.
61. ISO/FDIS 14649-111, “Industrial automation systems and integration – Physical device control – Data model for computerized numerical controllers – Part 111: Tools for milling ma-chines”, ISO/TC 184/SC 1/WG 7, 2004.
62. ISO/IS 14649-121, “Industrial automation systems and integration – Physical device control – Data model for computerized numerical controllers – Part 121: Tools for turning machines”, ISO/TC 184/SC 1/WG 7, 2005.
63. Kang, C. “Machine tool technology: present and prospect”, Journal of Korea Society of Precision Engineering, Vol. 13, No. 3, pp. 9–25, 1996.
64. Kang, J., Suh, S., “Machinability and set-up orientation for 5-axis numerically controlled machining of free surfaces”, International Journal of Advanced Manufacturing Technology, Vol. 13, No. 5, pp. 311–325, 1997.
65. Kang, S., Lee, J., Choi, J. “Shop floor programming system for turning operations”, Proceedings Conference of KSPE, pp. 707–712, 1995.
66. Kang, S. “NURBS interpolator for open architecture CNC control system”, Proceedings Eleventh Conference of KACC, pp. 656–659, October 1996.
67. Kim, D., Song, J., Kim, S. “Software-based acceleration and deceleration method for CNC machine and industrial robot”, Journal of Korea Electrical Engineering, pp. 562–572, 1992.
68. Kim, H. J., Kim, G. T., Choi, B. W. “Architecture Design for Open Intelligent Manufacturing System”, Proceedings Fourth IFAC Workshop, pp. 335–338, 1997.
69. Kim, H. “Characteristic analysis for system development”, Proceedings Conference of KACC, pp. 22–27, 1998.
70. Kim, J., Im, Y., Chung, S. “Real time control system for multi-motor manipulation”, Proceedings Eleventh Conference of KACC, pp. 1048–1051, 1996.
71. Kim, S. “Asymptotic PID control based on fuzzy inference and modified Ziegler–Nichols method”, Journal of KSPE, Vol. 13, No. 5, pp. 74–83, 1996.
72. Kim, S. “Small motor control”, Sungandang Publishing Co., Seoul, 2000.
73. Koren, Y. “Interpolator for a Computer Numerical Control System”, IEEE Transactions on Computers, Vol. C-25, No. 1, pp. 32–37, 1976.
74. Koren, Y. “Cross coupled biaxial computer control for manufacturing system”, ASME Transactions, Journal of Dynamic Systems, Measurement and Control, Vol. 102, No. 4, pp. 265– 272, December 1980.
75. Koren, Y., Masory, O. “Reference-pulse circular interpolators for CNC systems”, Journal of Engineering for Industry, Vol. 103, pp. 131–136, 1981.
76. Koren, Y. “Computer Control of Manufacturing System”, McGraw Hill, New York, NY., 1983.
77. Koren, Y., Lo, C. “Variable gain cross coupling controller for contouring”, CIRP Annals, Vol. 104, pp. 371–374, August 1991.
78. Koren, Y., Lo, C. “Advanced Controllers for Feed Drives”, CIRP Annals, Vol. 41, pp. 689-697, 1992.
79. Koren, Y., Pasek, Z. J., Ulsoy, A. G., Benchetrit, U. “Real-Time Open Control Architecture and System Performance”, CIRP Annals, Vol. 45/1, pp. 377–380, 1996.
80. Koren, Y. “Control of machine tools”, Journal of Manufacturing Science and Engineering, Vol. 119, pp. 749–755, November 1997.
81. Kuo, B. C. “Automatic Control Systems”, Fourth Edition, Prentice-Hall, Upper Saddle River, NJ., 1981.
82. Lavallee, R. “Soft Logic’s New Challenge: Distributed Machine Control”, Control Engineering, pp. 51–58, August 1996.
83. Lee, B. “NC readings”, Sungandang Publishing Co., Seoul, 1995.
84. Lee, J., Park, H., Huh, W. “Tracking control of servo system with two degrees-of-freedom”, Proceedings Eleventh Conference of KACC, pp. 844-847, 1996.
85. Lewis, R.W. “Programming Industrial Control Systems using IEC 1131-3”, IEC, 1995.
86. LG Industrial Electronics Ltd., “Method for generating acceleration and deceleration for CNC machine tools”, Patent applied 96-15124, 1996.
87. Lo, C. C. “Feedback Interpolators for CNC Machine Tools”, Journal of Manufacturing Science and Engineering, Vol. 119, pp. 587–592, 1997.
88. Lynch, M. “Computer Numerical Control, Advanced Techniques”, McGraw Hill, New York, NY., 1993.
89. Lyu J., Kang S., Chon, Y. “Minimum time pocket machining cycle for conversational programming system”, Proceedings Conference of KACC, pp. 848–851, 1996.
90. Mazak, “Programming Manual for Mazatrol T32-2”, 1990.
91. MDSI, “Open CNC Demo V5.1.1”, www.misi2.com, 2000.
92. Mitsubushi Denki, “Numerical control machining method”, Patent applied 84-6114, 1984.
93. Mitsubishi Denki, “Numerically Controlled Machining Method using Primary and Compensating cutters”, US patent 4713747, 1987.
94. Mitsubishi Denki, “Machining data editing method for CNC controller”, Patent applied 91-1508, 1991.
95. Na, I., Choi, J., Chang, T., Choi, B., Song, O. “Contouring error analysis for PID control of machining center”, Journal of ICASE, pp. 32–39, 1997.
96. NAF Controls AB, “Method and an Apparatus in Tuning a PID Regulator”, US patent 4549123, 1985.
97. National Instruments Corp., “System and Method for Closed Loop Autotuning of PID Con-trollers”, US patent 6081751, June 2000.
98. NRL-SNT, www.step-nc.com, 2008.
99. Newman, S., Ali, L., Brail, A., Brecher, C., Klemm, P., Liu, R., Nassehi, A., Nguyen, V., Proctor, F., Rosso-Jr, R., Stroud, I., Suh, S., Vitr, M., Wang, L., Xu, X. “The Evolution of CNC Technology from Automated Manufacture to Global Interoperable Manufacturing”, Second International Conference on Changeable, Agile, Reconfigurable and Virtual Production, July 2007.
100. Newman, S., Nassehi, A., Kumar, T., Vichare, P. “Universal Manufacturing Platform for Global CNC Machining”, International Workshop on Ubiquitous Manufacturing, February 2008.
101. Ohyama, M., Tamai, S. “AC servo system: theory and design in practice”, Jonghap Publishing Co., Seoul, 1990.
102. Oki Electric, “System for Interpolating an ARC for a Numerical Control System”, US patent 4243924, 1981.
103. Olsson, G., Piani, G. “Computer Systems for Automation and Control”, Prentice Hall, 1992.
104. www.arcweb.com/omac, 2000.
105. OMG, “CORBA 3.0 New Components Chapters OMG TC Document ptc/99-10-04”, October 1999.
106. OMG, “The Common Object Request Broker: Architecture and Specification Revision 2.4”, October 2000.
107. OSE consortium, “Development of OSEC (Open System Environment for Controller)”, OSEC Project technical report, October 1998.
108. Park, C. “Cycle machining method for numerical control”, Patent applied 96-5564, 1996
109. Park, S., Jung, S. “Priority determination method under real time CORBA environment”, Journal of Korea Electrical Engineering, Vol. 38, No. 4, pp. 59–71, 2001.
110. Piegl, L., Tiller, W. “ The NURBS Book”, Second Edition, Springer Verlag, London, 1995.
111. Poo, A. N., Bolinger, J. G., Younkin, G.W. “Dynamic errors in type I contouring systems”, IEEE Transaction on Industrial Application, Vol. T.8, No. 4, pp. 477–484, 1972.
112. Pritschow, G., Philipp, W. “Research on the Efficiency of Feedforward Controllers in M Direct Drives”, CIRP Annals, Vol. 41/1, pp. 411–415, 1992.
113. Pritschow, G., Daniel, G., Junghans, G., Sperling, W. “Open System Controllers-A Challenge for the Future of the Machine Tool Industry”, CIRP Annals, Vol. 42/1, pp. 449–452, 1993.
114. Richard, J., Nguyen, V., Stroud, I. “Standardization of the Manufacturing Process: IMS/EU STEP-NC project about Wire EDM Process”, Intelligent Manufacturing System Conference, May 2004.
115. Rober S. J., Shin, Y. C. “Modeling and Control of CNC Machine using A PC-based Open Architecture Controller”, Mechatronics, Vol. 5, No. 4, pp. 401–420, 1995.
116. Samsung electronic, “Acceleration and deceleration method for servo motor”, Patent applied 96-24775, 1996.
117. Samsung electronic, “Tool path generation method for turning operations”, Patent applied 98-40717, 1998.
118. Schmitz, D., Khosla, P. “CHIMERA: A Real-Time Programming Environment for Manipulator Control”, Proceedings IEEE Conference of Robotics Automation, pp. 846–852, 1989.
119. Schofield, S., Wright, P. “Open Architecture Controllers for Machine Tools, Part 1: Design Principles”, Journal of Manufacturing Science and Engineering, Vol. 120, pp. 417–424, 1998.
120. Servo Motor, www.tao.co.kr, 2001.
121. Shin, D., Chung, S. “Design of digital filter for acceleration and deceleration control of servo motor”, Journal of KSPE, Vol. 14, No. 9, pp.52–60, 1997.
122. Shin, S., Suh, S., Stroud, I. “Reincarnation of G-code based part programs into STEP-NC for turning applications”, Computer Aided Design, Vol. 39, pp.1–16, 2007.
123. Siemens, “Method for limiting the rate-of-change of acceleration in numerical driving sys-tems”, US patent 5073748, 1991.
124. Siemens, “Sinumerik 840D OEM package NCK: User’s Manual”, Preliminary Edition, March 1995.
125. Silberschatz, A., Peterson, J., Galvin, P. “Operating System Concepts”, Third Edition, Addison Wesley, Boston, MA., 1991.
126. Srinivasan, K., Kulkarni, P. “Cross coupled control of biaxial feed drive servomechanism”, Transactions of ASME, Journal of Dynamic Systems, Measurement and Control, Vol. 112, No. 2, pp. 225–232, June 1990.
127. Srinivasan, K., Tsao, T. C. “Machine tool feed drives and their control: A survey of the state of the art”, Journal of Manufacturing Science and Engineering, Vol. 119, pp.743–748, November 1997.
128. STEP tools, www.steptools.com, 1999.
129. Stewart, D., Volpe, R., Khosla, P. “Design of Dynamically Reconfigurable Real-Time Software using Port-Based Objects”, IEEE Transaction on Software Engineering, Vol. 23, No. 12, pp. 759–776, 1997.
130. Stroud, I., Xirouchakis, P. “Strategy features for communicating aesthetic shapes for manu-facturing”, International Journal of Computer Integrated Manufacturing, Vol. 19, No. 6, pp. 639–649, 2006.
131. Suh, S., Lee, K. “A prototype CAM system for 4-axis NC machining of rotational-free-surfaces”, Journal of Manufacturing Systems, Vol. 10, No. 4, pp. 322–331, August 1991.
132. Suh, S., Cho, J., Hascoet, J. “Incorporation of tool deflection in tool path computation: simulation and analysis”, Journal of Manufacturing Systems, Vol. 15, No. 3, 1996.
133. Suh, S., Lee, S., Lee, J. “Compensating probe radius in free surface modeling with CMM: simulation and experiment”, International Journal of Production Research, Vol. 34, No. 2, pp. 507–523, 1996.
134. Suh, S., Lee, J. “Interference-free tool-path planning for flank milling of twisted ruled sur-faces”, International Journal of Advanced Manufacturing Technology, Vol. 14, No. 11, pp. 795–805, 1998.
135. Suh, S., Lee, J., Kim, S., “Multiaxis machining with additional-axis NC system: theory and development”, International Journal of Advanced Manufacturing Technology, Vol. 14, No. 12, pp. 865–875, 1998.
136. Suh, S. “Numerical Control and Integrated Manufacturing Systems”, Second Edition, POSTECH Press, September 1999.
137. Suh, S. “STEP-NC Technology: Present and prospect”, Journal of KSPE, Vol. 17, No. 5, pp. 8–14, 2000.
138. Suh, S., Jih, W., Hong, H., Chung, D., “Sculptured surface machining of spiral bevel gears with CNC milling”, International Journal of Machine Tools & Manufacture, Vol. 41, pp. 833–850, May 2001.
139. Suh, S. and Cheon, S. “A Framework for an Intelligent CNC and Data Model”, International Journal of Advanced Manufacturing Technology, Vol. 19, pp. 727–735, 2002.
140. Suh, S., Lee, B., Chung, D., Cheon, S. “Architecture and implementation of a shop-floor programming system for STEP-compliant CNC”, Computer Aided Design, Vol. 35, pp. 1069– 1083, 2003.
141. Suh, S., Lee, B. “STEP-Manufacturing Roadmap”, Proceedings Korea CAD/CAM Conference, January 2004.
142. Suh, S., Chung, D., Lee, B., Shin, S., Choi, I., Kim, K. “STEP-compliant CNC system for turning: Data model, architecture, and implementation”, Computer Aided Design, Vol. 38, pp. 677–688, 2006.
143. Suh, S., Stroud, I. “A new model for machine data transfer”, ISO Focus, pp. 24–26, 2007.
144. Sung, W. “A study on surface machining with CNC machining center”, MS Thesis, Seoul National University, 1998.
145. Szafarczyk, M., Klein, B., Szala, W. “Extension of Typical CNC Systems by External Con-trollers”, CIRP Annals, Vol. 38/1, pp. 351–354, 1989.
146. Szyperski, C., “Component Software: Beyond Object-Oriented Programming”, Addison Wesley, Boston, MA., 1999.
147. Teltz, R., Elbestawi, M. “Design Basis and Implementation of an Open Architecture Machine Tool Controller”, Transactions of NAMRI/SME, Vol. XXV, pp. 299–304, 1997.
148. Timmerman, M., et al., “Windows NT real-time extensions better of worse?”, Real-Time Magazine 98-3, pp. 11–19, 1998.
149. Timmerman, M., et al., “Is Windows CE 2.0 a real threat to the RTOS World?”, Real-Time Magazine 98-3, pp. 20–24, 1998.
150. Tomizuka, M. “Zero phase error tracking algorithm for digital control”, ASME Transactions, Journal of Dynamic Systems, Measurement and Control, Vol. 109, pp. 65–68, 1987.
151. Toshiba, “Numerical Control Unit”, US patent 5994863, 1999.
152. University of Utah Research, “Method and system for spline interpolation, and their use in CNC”, US patent 5726896, 1998.
153. U.S. Philips Corp., “Machining apparatus wherein ARC length along a tool path is determined in relation to a parameter which is a monotonic function of time”, US patent 5321623, 1994.
154. VenturCom, “RTX 4.1 manual”, 1997.
155. Weck, M., Bibring, H. “Handbook of Machine Tools, Vol. 3: Automation and Control”, John Wiley & Sons, Hoboken, NJ., 1984.
156. Wosnik, M., Kramer, T., Selig, A., Klemm, P. “Enabling feedback of process data by use of STEP-NC”, International Journal of Computer Integrated Manufacturing, Vol. 19, No. 6, pp. 559–569, 2006.
157. Xu, X., Wang, H., Mao, J., Newman, S., Kramer, T., Proctor, F., Michaloski, J. “STEP-compliant NC research: the search for intelligent CAD/CAPP/CAM/CNC integration”, International Journal of Production Research, Vol. 43, No. 17, pp. 3703–3743, 2005.
158. Xu, X., Proctor, F., Klemm, P., Suh, S. “STEP-compliant process planning and manufactur-ing”, International Journal of Computer Integrated Manufacturing, Vol. 19, No. 6, pp. 491– 494, September 2006.
159. Yamazaki, K. “Open Architecture CNC Controller in the USA”, Proceedings Seventh International Machine Tool Engineering Conference, pp. 204–218, 1996.
160. Yang, D., Kong, T. “Parametric interpolator versus linear interpolator for precision CNC machining”, Computer Aided Design, Vol. 26, No. 3, pp. 225–233, 1994.
161. Yeh, S., Hus, P. “The speed-controlled interpolator for machining parametric curve”, Computer Aided Design, Vol. 31, No. 5, pp. 349–357, 1999.
162. Zahavi, R. “Enterprise Application Integration with CORBA: Component and Web-Based Solutions”, John Wiley & Sons, 2000.
163. Ziegler, J. G., Nichols, N. B. “Optimum Settings for Automatic Controllers”, ASME Transactions, pp. 759–768, 1942.
164. Ziegler, J. G., Nichols, N. B., “Process Lags in Automatic-Control Circuits”, ASME Transactions, pp. 433–444, 1943.