A comparative study on biodegradation and mechanical properties of pressureless infiltrated Ti/Ti6Al4V–Mg composites

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 63, Issue , 2016, Pages 273-286

  Esen, Ziya ^a   Bütev, Ezgi ^a,b   Karakaş, M Serdar ^a  

^a CANKAYA UNIVERSITY   (Turkey)

^b MIDDLE EAST TECHNICAL UNIVERSITY   (Turkey)

Author keywords

Biodegradation; Infiltration; Magnesium composites; Mechanical properties; Simulated body fluid; Titanium

Indexed keywords

BODY FLUIDS; BONE; COMPRESSIVE STRENGTH; DEGRADATION; INFILTRATION; INTERMETALLICS; MAGNESIUM; MECHANICAL PROPERTIES; POROSITY; SCAFFOLDS; SINTERING; TITANIUM;

ARTIFICIAL MATERIAL; COMPARATIVE STUDIES; HYDROXYAPATITE FORMATIONS; MAGNESIUM COMPOSITE; MECHANICAL RESPONSE; MECHANICALLY STABLE; SECONDARY PHASIS; SIMULATED BODY FLUIDS;

BIODEGRADATION;

ALUMINUM; CALCIUM PHOSPHATE DIBASIC; HYDROGEN; MAGNESIUM; MAGNESIUM CHLORIDE; MAGNESIUM HYDROXIDE; TITANIUM; VANADIUM; HYDROXYAPATITE; TITANIUM ALLOY (TIAL6V4);

ARTICLE; BIODEGRADATION; BIOMECHANICS; COMPARATIVE STUDY; COMPRESSION; COMPRESSIVE STRENGTH; CONTROLLED STUDY; IMMERSION; IN VITRO STUDY; POROSITY; PRECIPITATION; PRESSURE; PRIORITY JOURNAL; SIMULATION; BIODEGRADABLE IMPLANT; CHEMISTRY; CORROSION; MATERIALS TESTING;

ABSORBABLE IMPLANTS; CORROSION; DURAPATITE; MAGNESIUM; MATERIALS TESTING; POROSITY; TITANIUM;

EID: 84978474501     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2016.06.026     Document Type: Article

References (67)

1. ASTM F1580-01, n.d. Standard Specificaton for Titanium and Titanium–6Aluminum–4Vanadium Alloy Powders for Coatings of Surgical Implants.
2. Bakhsheshi-Rad, H.R., Hamzah, E., Daroonparvar, M., Ebrahimi-Kahrizsangi, R., Medraj, M., In-vitro corrosion inhibition mechanism of fluorine-doped hydroxyapatite and brushite coated Mg–Ca alloys for biomedical applications. Ceram. Int. 40 (2014), 7971–7982, 10.1016/j.ceramint.2013.12.147.
3. Bobby Kannan, M., Singh Raman, R.K., Evaluating the stress corrosion cracking susceptibility of Mg–Al–Zn alloy in modified-simulated body fluid for orthopaedic implant application. Scr. Mater. 59 (2008), 175–178, 10.1016/j.scriptamat.2008.03.001.
4. Bonucci, E., Mechanical testing of the bone and the bone-implant interface. An, Y.H., Draughn, R.A., (eds.) Basic Composition and Structure of Bone, 2000, CRC Press, Boca Raton, FL, 3–22.
5. Brunette, D.M., Tengvall, P., Textor, M., Thomsen, P., Titanium in Medicine: Materials Science, Surface Science, Engineering, Biological Responses and Medical Applications. 2001, Springer-Verlag, Berlin Heidelberg.
6. Chen, B., Liang, C., Preparation of hydroxyapatite coating by the use of a sacrificial Mg anode method. Ceram. Int. 33 (1997), 701–703.
7. Chen, Q., Thouas, G. a, Metallic implant biomaterials. Mater. Sci. Eng. R Rep. 87 (2015), 1–57, 10.1016/j.mser.2014.10.001.
8. Chen, Y., Feng, B., Zhu, Y., Weng, J., Wang, J., Lu, X., Preparation and characterization of a novel porous titanium scaffold with 3D hierarchical porous structures. J. Mater. Sci. Mater. Med. 22 (2011), 839–844, 10.1007/s10856-011-4280-0.
9. Cheng, K., Shen, G., Weng, W., Han, G., Synthesis of hydroxyapatite/fluoroapatite solid solution by a sol–gel method. Mater. Lett., 2001, 0–4.
10. Poinern, Eddy Jai, Brundavanam, G., Fawcett, D, S., Biomedical magnesium alloys: a review of material properties, surface modifications and potential as a biodegradable orthopaedic implant. Am. J. Biomed. Eng. 2 (2013), 218–240, 10.5923/j.ajbe.20120206.02.
11. Esen, Z., Bor, Ş., Characterization of Ti–6Al–4V alloy foams synthesized by space holder technique. Mater. Sci. Eng. A 528 (2011), 3200–3209, 10.1016/j.msea.2011.01.008.
12. Esen, Z., Bor, Ş., Processing of titanium foams using magnesium spacer particles. Scr. Mater. 56 (2007), 341–344, 10.1016/j.scriptamat.2006.11.010.
13. Esen, Z., Dikici, B., Duygulu, O., Dericioglu, A.F., Titanium–magnesium based composites: mechanical properties and in-vitro corrosion response in Ringer׳s solution. Mater. Sci. Eng. A 573 (2013), 119–126, 10.1016/j.msea.2013.02.040.
14. Garg, H., Bedi, G., Garg, A., 2012. Implant Surface Modifications : A Review, pp. 319–324.
15. Geetha, M., Singh, A.K., Asokamani, R., Gogia, A.K., Ti based biomaterials, the ultimate choice for orthopaedic implants – a review. Prog. Mater. Sci. 54 (2009), 397–425, 10.1016/j.pmatsci.2008.06.004.
16. González, S., Pellicer, E., Frnell, J., Blanquer, A., Barrios, L., Ibáñez, E., Solsona, P., Suriñach, S., Baró, M.D., Nogués, C., Sort, J., Improved mechanical performance and delayed corrosion phenomena in biodegradable Mg–Zn–Ca alloys through Pd-alloying. Mech. Behav. Biomed. Mater. 6 (2012), 53–62.
17. Gu, X.N., Li, N., Zhou, W.R., Zheng, Y.F., Zhao, X., Cai, Q.Z., Ruan, L., Corrosion resistance and surface biocompatibility of a microarc oxidation coating on a Mg–Ca alloy. Acta Biomater. 7 (2011), 1880–1889, 10.1016/j.actbio.2010.11.034.
18. Gu, X.N., Zheng, W., Cheng, Y., Zheng, Y.F., A study on alkaline heat treated Mg–Ca alloy for the control of the biocorrosion rate. Acta Biomater. 5 (2009), 2790–2799, 10.1016/j.actbio.2009.01.048.
19. Gu, X.-N., Zheng, Y.-F., A review on magnesium alloys as biodegradable materials. Front. Mater. Sci. China 4 (2010), 111–115, 10.1007/s11706-010-0024-1.
20. Hashemi, N.-, Clark, J., Phase Diagrams of Magnesium Alloys. 1988, ASM International, Metals Park, Ohio.
21. Hiromoto, S., Yamamoto, A., High corrosion resistance of magnesium coated with hydroxyapatite directly synthesized in an aqueous solution. Electrochim. Acta 54 (2009), 7085–7093, 10.1016/j.electacta.2009.07.033.
22. Jamesh, M., Kumar, S., Sankara Narayanan, T.S.N., Corrosion behavior of commercially pure Mg and ZM21 Mg alloy in Ringer׳s solution – long term evaluation by EIS. Corros. Sci. 53 (2011), 645–654, 10.1016/j.corsci.2010.10.011.
23. Kaesel, V., Tai, P.-T., Bach, F.-W., Haferkamp, H., Witte, F., Windhagen, H., Approach to control the corrosion of magnesium by alloying. Kainer, K.U., (eds.), 2003, Proceedings of the Sixth International Conference Magnesium Alloys and Their Applications, 534–539.
24. Kalantari, S.M., Arabi, H., Mirdamadi, S., Mirsalehi, S.A., Biocompatibility and compressive properties of Ti–6Al–4V scaffolds having Mg element. J. Mech. Behav. Biomed. Mater. 48 (2015), 183–191, 10.1016/j.jmbbm.2015.04.015.
25. Kim, H., Miyaji, F., Kokubo, T., Nakamura, T., Preparation of bioactive Ti and its alloys via simple chemical surface treatment. Biomed. Mater. Res 32 (1996), 409–417.
26. Kokubo, T., Takadama, H., How useful is SBF in predicting in vivo bone bioactivity?. Biomaterials 27 (2006), 2907–2915, 10.1016/j.biomaterials.2006.01.017.
27. Kokubo, T., Yamaguchi, S., Novel bioactive titanate layers formed on Ti metal and its alloys by chemical treatments. Materials (Basel) 3 (2009), 48–63, 10.3390/ma3010048.
28. Kondoh, K., Kawakami, M., Imai, H., Umeda, J., Fujii, H., Wettability of pure Ti by molten pure Mg droplets. Acta Mater. 58 (2010), 606–614, 10.1016/j.actamat.2009.09.039.
29. Kumta, P.N., Sfeir, C., Lee, D.-H., Olton, D., Choi, D., Nanostructured calcium phosphates for biomedical applications: novel synthesis and characterization. Acta Biomater. 1 (2005), 65–83, 10.1016/j.actbio.2004.09.008.
30. Kuwahara, H., Al-Abdullat, Y., Mazaki, N., Tsutsumi, S.A.T., Precipitation of magnesium apatite on pure magnesium surface during immersing in Hank׳s solution. Mater. Trans., 2001.
31. Kuwahara, H., Al-Abdullat, Y., Ohta, M., Tsutsumi, S., Ikeuchi, K., Mazaki, N., Surface reaction of magnesium in Hank׳s solutions. Mater. Sci. Forum, 350, 2000, 349.
32. Lausmaa, J., Ask, M., Rolander, U., Kasemo, B., Preparation and analysis of Ti and alloyed Ti surfaces. Mater. Res Soc. Symp. Proc. 110 (1989), 647–653.
33. Li, L., Gao, J., Wang, Y., Evaluation of cyto-toxicity and corrosion behavior of alkali-heat-treated magnesium in simulated body fluid. Surf. Coat. Technol. 185 (2004), 92–98, 10.1016/j.surfcoat.2004.01.004.
34. Li, Z., Song, G.-L., Song, S., Effect of bicarbonate on biodegradation behaviour of pure magnesium in a simulated body fluid. Electrochim. Acta 115 (2014), 56–65, 10.1016/j.electacta.2013.10.131.
35. Liu, X., Chu, P., Ding, C., Surface modification of titanium, titanium alloys, and related materials for biomedical applications. Mater. Sci. Eng. R Rep. 47 (2004), 49–121, 10.1016/j.mser.2004.11.001.
36. Lu, X., Leng, Y., Theoretical analysis of calcium phosphate precipitation in simulated body fluid. Biomaterials 26 (2005), 1097–1108, 10.1016/j.biomaterials.2004.05.034.
37. Moravej, M., Mantovani, D., Biodegradable metals for cardiovascular stent application: interests and new opportunities. Int. J. Mol. Sci. 12 (2011), 4250–4270, 10.3390/ijms12074250.
38. Nagels, J., Stokdijk, M., Rozing, P.M., Stress shielding and bone resorption in shoulder arthroplasty. J. Shoulder Elb. Surg. 12 (2003), 35–39, 10.1067/mse.2003.22.
39. Nakano, T., Bone tissue and biomaterial design based on the anisotropic microstructure. Niinomi, M., Narushima, T., Nakai, M., (eds.) Advances in Metallic Biomaterials:Tissues, Materials and Biological Reactions, 2015, Springer-Verlag, Berlin Heidelberg, 5.
40. Niinomi, M., Mechanical properties of biomedical titanium alloys. Mater. Sci. Eng. A 243 (1998), 231–236, 10.1016/S0921-5093(97)00806-X.
41. Niinomi, M., Nakai, M., Hieda, J., Development of new metallic alloys for biomedical applications. Acta Biomater. 8 (2012), 3888–3903, 10.1016/j.actbio.2012.06.037.
42. Nouri, A., Hodgson, P.D., Wen, C., Biomimetic porous titanium scaffolds for orthopedic and dental applications. Mukherjee, A., (eds.), 2010, Biomimetics Learning From Nature Learning From Nature, 415–451.
43. Panjian, L., Kangasniemi, I., de Groot, K., Bonelike hydroxyapatite induction by a gel-derived titania on a titanium substrate. J. Am. Ceram. Soc. 7 (1994), 255–260.
44. Quach, N.-C., Uggowitzer, P.J., Schmutz, P., Corrosion behaviour of an Mg–Y–RE alloy used in biomedical applications studied by electrochemical techniques. Comptes Rendus Chim. 11 (2008), 1043–1054, 10.1016/j.crci.2008.06.007.
45. Ramires, P.A., Romito, A., Cosentino, F., Milella, E., The influence of titania/hydroxyapatite composite coatings on in vitro osteoblasts behaviour. Biomaterials 22 (2001), 1467–1474.
46. Rettig, R., Virtanen, S., Composition of corrosion layers on a magnesium rare-earth alloy in simulated body fluids. J. Biomed. Mater. Res. A, 88, 2004, 359.
47. Seiler, H.G., Sigel, H., Handbook on Toxicity of Inorganic Compounds. 1988, Marcel Dekker Inc., NY, USA.
48. Simaranov, A., Sokolova, I., Marshakov, A., Mikhailovskii, Y., Corrosion-electrochemical behavior of magnesium in acidic media, containing oxidants. Prot. Met. 27 (1991), 329–334.
49. Sittig, C., Textor, M., Spencer, N.D., Wieland, M., Vallotton, P.H., Surface characterization of implant materials c.p. Ti, Ti–6Al–7Nb and Ti–6Al–4V with different pretreatments. J. Mater. Sci. Mater. Med. 10 (1999), 35–46.
50. Song, G., Recent progress in corrosion and protection of magnesium alloys – an overview of CAST׳s research work. Adv. Eng. Mater., 7, 2005, 563.
51. Song, G., Atrens, A., Understanding magnesium corrosion – a framework for improved alloy performance. Adv. Eng. Mater. 5 (2003), 837–858, 10.1002/adem.200310405.
52. Song, G.L., Potential and current distributions of one-dimensional galvanic corrosion systems. Corros. Sci. 52 (2010), 455–480, 10.1016/j.corsci.2009.10.003.
53. Song, G.L., Effect of tin modification on corrosion of AM70 magnesium alloy. Corros. Sci. 51 (2009), 2063–2070, 10.1016/j.corsci.2009.05.031.
54. Song, G.-L., “Electroless” deposition of a pre-film of electrophoresis coating and its corrosion resistance on a Mg alloy. Electrochim. Acta 55 (2010), 2258–2268, 10.1016/j.electacta.2009.11.078.
55. Song, G.L., Mishra, R., Xu, Z., Crystallographic orientation and electrochemical activity of AZ31 Mg alloy. Electrochem. Commun. 12 (2010), 1009–1012, 10.1016/j.elecom.2010.05.011.
56. Song, G.L., Xu, Z., Effect of microstructure evolution on corrosion of different crystal surfaces of AZ31 Mg alloy in a chloride containing solution. Corros. Sci. 54 (2012), 97–105, 10.1016/j.corsci.2011.09.005.
57. Song, G.-L., Xu, Z., The surface, microstructure and corrosion of magnesium alloy AZ31 sheet. Electrochim. Acta 55 (2010), 4148–4161, 10.1016/j.electacta.2010.02.068.
58. Song, Y.W., Shan, D.Y., Han, E.H., Electrodeposition of hydroxyapatite coating on AZ91D magnesium alloy for biomaterial application. Mater. Lett. 62 (2008), 3276–3279, 10.1016/j.matlet.2008.02.048.
59. Staiger, M.P., Pietak, A.M., Huadmai, J., Dias, G., Magnesium and its alloys as orthopedic biomaterials: a review. Biomaterials 27 (2006), 1728–1734, 10.1016/j.biomaterials.2005.10.003.
60. Vormann, J., Magnesium: nutrition and metabolism. Mol. Asp. Med. 24 (2003), 27–37, 10.1016/S0098-2997(02)00089-4.
61. Wang, H., Zhao, C., Chen, Y., Li, J., Zhang, X., Electrochemical property and in vitro degradation of DCPD-PCL composite coating on the biodegradable Mg–Zn alloy. Mater. Lett. 68 (2012), 435–438, 10.1016/j.matlet.2011.11.029.
62. Wang, H.X., Guan, S.K., Wang, X., Ren, C.X., Wang, L., In vitro degradation and mechanical integrity of Mg–Zn–Ca alloy coated with Ca-deficient hydroxyapatite by the pulse electrodeposition process. Acta Biomater. 6 (2010), 174–178.
63. Wang, Y., Wei, M., Gao, J., Hu, J., Zhang, Y., Corrosion process of pure magnesium in simulated body fluid. Mater. Lett. 62 (2008), 2181–2184, 10.1016/j.matlet.2007.11.045.
64. Wei, M., Kim, H.M., Kokubo, T., Evans, J.H., Optimising the bioactivity of alkaline-treated titanium alloy. Mater. Sci. Eng. C 20 (2002), 125–134, 10.1016/S0928-4931(02)00022-X.
65. Witte, F., Reifenrath, J., Muller, P.P., Crostack, H.A., Nellesen, J., Bach, F.W., Bormann, D., Rudert, M., Cartilage repair on magnesium scaffolds used as subchondral bone replacement. Werkst. Korros.-Mater. Corros. 37 (2006), 504–508.
66. Xin, Y., Huo, K., Tao, H., Tang, G., Chu, P.K., Influence of aggressive ions on the degradation behavior of biomedical magnesium alloy in physiological environment. Acta Biomater. 4 (2008), 2008–2015, 10.1016/j.actbio.2008.05.014.
67. Zreiqat, H., Howlett, C.R., Zannettino, a, Evans, P., Schulze-Tanzil, G., Knabe, C., Shakibaei, M., Mechanisms of magnesium-stimulated adhesion of osteoblastic cells to commonly used orthopaedic implants. J. Biomed. Mater. Res. 62 (2002), 175–184, 10.1002/jbm.10270.