Biocompatibility and compressive properties of Ti-6Al-4V scaffolds having Mg element

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 48, Issue , 2015, Pages 183-191

  Kalantari, Seyed Mohammad ^a   Arabi, Hossein ^a   Mirdamadi, Shamsodin ^a   Mirsalehi, Seyed Ali ^a  

^a IRAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Iran)

Author keywords

Biocompatibility; Compressive properties; Mg; Scaffold; Ti 6Al 4 V

Indexed keywords

ALUMINUM; BIOCOMPATIBILITY; COMPRESSIVE STRENGTH; MAGNESIUM; POWDERS; QUARTZ; SCAFFOLDS; SINTERING; TITANIUM; TITANIUM ALLOYS; TITANIUM NITRIDE; TITANIUM OXIDES;

CELL ATTACHMENTS; COMPRESSIVE PROPERTIES; NO CONTAMINATIONS; POROUS SCAFFOLD; PROLIFERATION RATE; TI-6 AL-4 V; UNIAXIAL PRESSURES; VOLUME PERCENTAGE;

SCAFFOLDS (BIOLOGY);

BIOMATERIAL; MAGNESIUM; OXIDE; STEEL; TI 6AL 4V SCAFFOLD; TITANIUM; TUNGSTEN; UNCLASSIFIED DRUG; ALLOY;

ARTICLE; BIOCOMPATIBILITY; CELL ADHESION; CELL PROLIFERATION; CELL VIABILITY; COMPRESSIVE STRENGTH; COMPUTER PROGRAM; CONTROLLED STUDY; EVAPORATION; HUMAN; HUMAN CELL; IMAGE ANALYSIS; MTT ASSAY; PHASE TRANSITION; POROSITY; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; X RAY DIFFRACTION; X RAY SPECTROMETRY; YOUNG MODULUS; CELL SHAPE; CHEMISTRY; MATERIALS TESTING; TISSUE SCAFFOLD; TUMOR CELL LINE;

ALLOYS; BIOCOMPATIBLE MATERIALS; CELL LINE, TUMOR; CELL PROLIFERATION; CELL SHAPE; COMPRESSIVE STRENGTH; HUMANS; MAGNESIUM; MATERIALS TESTING; TISSUE SCAFFOLDS; TITANIUM;

EID: 84928664416     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2015.04.015     Document Type: Article

References (34)

1. ASTM F1580-01, 2001. Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants.
2. Anselme K. Osteoblast adhesion on biomaterials. Biomaterials 2000, 21:667-681.
3. Arifvianto B., Zhou J. Fabrication of metallic biomedical scaffolds with the space holder method: a review. Materials 2014, 7:3588-3622.
4. Ayda N., Alam M., Ravindranath M. Corrosion in titanium dental implants: literature review. J. Indian Prosthodonic Soc. 2005, 5:126-131.
5. Aydoğmuş T., Bor Ş. Processing of porous TiNi alloys using magnesium as space holder. J. Alloy. Compd. 2009, 478:705-710.
6. Bhattarai S.R., Khalil K.A.R., Dewidar M., Hwang P.H., Yi H.K., Kim H.Y. Novel production method and in-vitro cell compatibility of porous Ti-6Al-4V alloy disk for hard tissue engineering. J. Biomed. Mater. Res. A 2008, 86:289-299.
7. Chen J., Paetzell E., Zhou J., Lyons L., Soboyejo W. Osteoblast-like cell ingrowth, adhesion and proliferation on porous Ti-6Al-4V with particulate and fiber scaffolds. Mater. Sci. Eng. C 2010, 30:647-656.
8. Chen Y., Feng B., Zhu Y., Weng J., Wang J., Lu X. Fabrication of porous titanium implants with biomechanical compatibility. Mater. Lett. 2009, 63:2659-2661.
9. de Vasconcellos, L.M.R., Cairo, C.A.A., de Vasconcellos, L.G.O., de Alencastro Graça, M.L., do Prado, R.F., Carvalho, Y.R., 2012. Porous Titanium by Powder Metallurgy for Biomedical Application: Characterization, Cell Citotoxity and in vivo Tests of Osseointegration, INTECH Open Access Publisher, . http://dx.doi.org/10.5772/47816.
10. Dezfuli S.N., Sadrnezhaad S., Shokrgozar M., Bonakdar S. Fabrication of biocompatible titanium scaffolds using space holder technique. J. Mater. Sci. Mater. Med. 2012, 23:2483-2488.
11. Gagg G., Ghassemieh E., Wiria F.E. Effects of sintering temperature on morphology and mechanical characteristics of 3D printed porous titanium used as dental implant. Mater. Sci. Eng. C 2013, 33:3858-3864.
12. I˙pek Nakaş G., Dericioglu A.F., Bor Ş. Fatigue behavior of TiNi foams processed by the magnesium space holder technique. J. Mech. Behav. Biomed. Mater. 2011, 4:2017-2023.
13. Jha N., Mondal D., Dutta Majumdar J., Badkul A., Jha A., Khare A. Highly porous open cell Ti-foam using NaCl as temporary space holder through powder metallurgy route. Mater. Des. 2013, 47:810-819.
14. Kim S.W., Jung H.-D., Kang M.-H., Kim H.-E., Koh Y.-H., Estrin Y. Fabrication of porous titanium scaffold with controlled porous structure and net-shape using magnesium as spacer. Mater. Sci. Eng. C 2013, 33:2808-2815.
15. Kotan G., Bor A.Ş. Production and characterization of high porosity Ti-6Al-4V foam by space holder technique in powder metallurgy. Turk. J. Eng. Environ. Sci. 2009, 31:149-156.
16. Li J., De Wijn J., Van Blitterswijk C., De Groot K. Porous Ti6Al4V scaffolds directly fabricated by 3D fibre deposition technique: effect of nozzle diameter. J. Mater. Sci. Mater. Med. 2005, 16:1159-1163.
17. Li J.P., Habibovic P., van den Doel M., Wilson C.E., de Wijn J.R., van Blitterswijk C.A., de Groot K. Bone ingrowth in porous titanium implants produced by 3D fiber deposition. Biomaterials 2007, 28:2810-2820.
18. Mahboubi Soufiani A., Enayati M., Karimzadeh F. Fabrication and characterization of nanostructured Ti6Al4V powder from machining scraps. Adv. Powder Technol. 2010, 21:336-340.
19. Mansourighasri A., Muhamad N., Sulong A. Processing titanium foams using tapioca starch as a space holder. J. Mater. Process. Technol. 2012, 212:83-89.
20. Mirsalehi S.A., Khavandi A., Mirdamadi S., Naimi-Jamal M.R., Kalantari S.M. Nanomechanical and tribological behavior of hydroxyapatite reinforced ultrahigh molecular weight polyethylene nanocomposites for biomedical applications. J. Appl. Polym. Sci. 2015, 132:42052.
21. Niinomi M. Mechanical properties of biomedical titanium alloys. Mater. Sci. Eng. A 1998, 243:231-236.
22. Norman J., Shapter J.G., Short K., Smith L.J., Fazzalari N.L. Micromechanical properties of human trabecular bone: a hierarchical investigation using nanoindentation. J. Biomed. Mater. Res. A 2008, 87:196-202.
23. Oh I.-H., Nomura N., Masahashi N., Hanada S. Mechanical properties of porous titanium compacts prepared by powder sintering. Scr. Mater. 2003, 49:1197-1202.
24. Oshida Y. Bioscience and Bioengineering of Titanium Materials 2010, Elsevier, Oxford.
25. Ryan G., Pandit A., Apatsidis D.P. Fabrication methods of porous metals for use in orthopaedic applications. Biomaterials 2006, 27:2651-2670.
26. Ryan G., McGarry P., Pandit A., Apatsidis D. Analysis of the mechanical behavior of a titanium scaffold with a repeating unit-cell substructure. J. Biomed. Mater. Res. Part B Appl. Biomater. 2009, 90:894-906.
27. Smorygo O., Marukovich A., Mikutski V., Gokhale A., Reddy G.J., Kumar J.V. High-porosity titanium foams by powder coated space holder compaction method. Mater. Lett. 2012, 83:17-19.
28. Takahashi Y., Tabata Y. Effect of the fiber diameter and porosity of non-woven PET fabrics on the osteogenic differentiation of mesenchymal stem cells. J. Biomater. Sci. Polym. Ed. 2004, 15:41-57.
29. Tian Y., Ding S., Peng H., Lu S., Wang G., Xia L., Wang P. Osteoblast growth behavior on porous-structure titanium surface. Appl. Surf. Sci. 2012, 261:25-30.
30. Tscdemirci A., Hizal A., Altindiş M., Hall I., Güden M. The effect of strain rate on the compressive deformation behavior of a sintered Ti6Al4V powder compact. Mater. Sci. Eng. A 2008, 474:335-341.
31. Umeda J., Kawakami M., Kondoh K., Ayman E.-S., Imai H. Microstructural and mechanical properties of titanium particulate reinforced magnesium composite materials. Mater. Chem. Phys. 2010, 123:649-657.
32. Xue W., Krishna B.V., Bandyopadhyay A., Bose S. Processing and biocompatibility evaluation of laser processed porous titanium. Acta Biomater. 2007, 3:1007-1018.
33. Zhang X., Zheng G., Wang J., Zhang Y., Zhang G., Li Z., Wang Y. Porous Ti6Al4V scaffold directly fabricated by sintering: preparation and in vivo experiment. J. Nanomater. 2013, 2013:18.
34. Zreiqat H., Howlett C., Zannettino A., Evans P., Schulze-Tanzil G., Knabe C., Shakibaei M. Mechanisms of magnesium-stimulated adhesion of osteoblastic cells to commonly used orthopaedic implants. J. Biomed. Mater. Res. 2002, 62:175-184.