Extrusion of foods

Mathematical Modeling of Food Processing

Volumn , Issue , 2010, Pages 795-827

  Kumar, Prabhat ^a   Sandeep, K P ^a   Alavi, Sajid ^b  

^a NORTH CAROLINA STATE UNIVERSITY   (United States)

^b KANSAS STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84974819377     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (59)

1. Rossen, J.L., Miller, R.C. 1973. Food extrusion. Food Technology, 27(8): 46-53.
2. Hauck, B.W., Huber, G.R. 1989. Single screw vs twin screw extrusion. Cereals Foods World, 34(11): 930-939.
3. Riaz, M.N. 2000. Introduction to extruders and their principles. In: Riaz, M.N., editor. Extruders in Food Applications. Technomic Publishing Company, Inc., Lancaster, PA. pp. 1-23.
4. Fellows, P 2000. Food Processing Technology: Principles and Practice. Woodhead Publishing, Boca Raton, FL. pp. 294-308.
5. Guy, R.C.E. 1994. Raw materials for extrusion cooking processes. In: Frame, N.D., editor. The Technology of Extrusion Cooking. Chapman and Hall, Glasgow, UK. pp. 52-72.
6. Harper, J.M. 1981. Extrusion of Foods. Vol. 1. CRC Press, Inc., Boca Raton, FL. pp 1-212.
7. Liang, M., Huff, H.E., Hsieh, F.H. 2002. Evaluating energy consumption and efficiency of a twin-screw extruder. Journal of Food Science, 67(5): 1803-1807.
8. Ganjyal, G., Hanna, M. 2002. A review on residence time distribution (RTD) in food extruders and study on the potential of neural networks in RTD modeling. Journal of Food Science, 67(6): 1996-2002.
9. Levenspiel, P 1972. Nonideal flow. In: Levenspiel, O., editor. Chemical Reaction Engineering. Wiley, New York, NY. pp. 252-325.
10. Pinto, G., Tadmor, Z. 1970. Mixing and residence time distributions in melt screw extruders. Polymer Engineering and Science, 10(5): 279-288.
11. Bigg, D., Middleman, S. 1974. Mixing in a screw extruder. A model for residence time distribution and strain. Industrial & Engineering Chemistry Fundamentals, 13(1): 66-71.
12. Choudhury, G.S., Gautam, A., 1998. On-line measurement of residence time distribution in a food extruder. Journal of Food Science, 63(3): 529-534.
13. Lee, S.Y., McCarthy, K.L. 1996. Effect of screw configuration and speed on RTD and expansion of rice extrudate. Journal of Food Engineering, 19: 153-170.
14. 2-injection in twin screw extrusion. Part II: GM studies. Journal of Food Engineering, 21: 111-126.
15. Gogoi, B.K., Yam, K.L. 1994. Relationships between residence time and process variables in a corotating twin-screw extruder. Journal of Food Engineering, 21(2): 177-196.
16. Yeh, A.I., Hwang, S.J., Guo, J.J. 1992. Effects of screw speed and feed rate on residence time distribution and axial mixing of wheat flours in a twin-screw extruder. Journal of Food Engineering, 17(1): 1-13.
17. De Ruyck. 1997. Modeling of the residence time distribution in a twin screw extruder. Journal of Food Engineering, 32(4): 375-390.
18. Altomare, R.E., Ghossi, P 1986. An analysis of residence time distribution patterns in a twin screw cooking extruder. Biotechnology Progress, 2: 157-163.
19. Seker, M. 2005. Residence time distributions of starch with high moisture content in a single-screw extruder. Journal of Food Engineering, 67: 317-324.
20. Kao, S.V., Allison, G.R. 1984. Residence time distribution in a twin-screw extruder. Polymer Engineering and Science, 24(9): 645-651.
21. Colonna, P Melcion, J.P., Vergnes, B., Mercier, C. 1983. Flow, mixing, and residence time distribution of maize starch within a twin screw extruder with a longitudinal split barrel. Journal of Cereal Science, 1: 115-125.
22. Tsao, T.F. 1976. Available lysine retention during extrusion processing. PhD thesis, Colorado State University, Fort Collins, CO.
23. Yeh, A.I., Jaw, Y. 1998. Modeling residence time distribution for single screw extrusion process. Journal of Food Engineering, 35: 211-232.
24. Olkku, J., Antila, J., Heikkinen, J., Linko, P 1980. Residence time distribution in a twin-screw extruder. In: P Linko, Y. Malkki, J. Olkku, J. Larinkari, editors. Food Process Engineering. Vol. 1. Elsevier Applied Science Publishers, London, UK. pp. 791-794.
25. Van Zuilichem, D.J., Jager, T., Stolp, W. 1988. Residence time distribution in extrusioncooking. Part III: Mathematical modeling of axial mixing in a conical, counterrotating, twin-screw extruder processing maize grits. Journal of Food Engineering, 8: 109-127.
26. Kiani, A., Burkhardt, U., Heidemeyer, P., Franzheim, O., Rische, T., Stephan, M., Baetz, H., Pallas, R., Sahoub, M., Zeuner, A. 1996. A new online technique for morphology analysis and residence time measurement in a twin screw extruder. Society of Plastics Engineers, ANTEC, 54: 427-434.
27. Golba, J.C. 1980. A new method for the on-line determination of residence time distributions in extruders. Society of Plastics Engineers, ANTEC, 26: 83-85.
28. Chen, T., Patterson, W.I., Dealy, J.M. 1995. On-line measurement of residence time distribution in a twinscrew extruder. International Polymer Processing, 10(1): 3-9.
29. Squires, P.H. 1964. Screw extrusion-flow patterns and recent theoretical developments. SPE Transactions, 4: 7-16.
30. Booy, M.L. 1963. Influence of channel curvature on flow, pressure, distribution and power requirements of screw pumps and melt extruders. SPE Transactions, 3(3): 176-185.
31. Booy, M.L. 1967. Influence of oblique channel ends on screw-pump performance. Polymer Engineering and Science, 7(1): 5-16.
32. Li, Y., Hsieh, F. 1996. Modeling of flow in a single screw extruder. Journal of Food Engineering, 27: 353-375.
33. Ferretti, G., Montanari, R. 2007. A finite-difference method for the prediction of velocity field in extrusion process. Journal of Food Engineering, 83: 84-92.
34. White, J.L., Chen, Z. 1994. Simulation of non-isothermal flow in modular co-rotating twin screw extrusion. Polymer Engineering and Science, 34(3): 229-237.
35. Yu, C., Gunasekaran, S. 2004. Modeling of melt conveying in a deep-channel single-screw cheese stretcher. Journal of Food Engineering, 61(2): 241-251.
36. Van Zuilichem, D.J., ven der Laan, E., Kuiper, E. 1990. The development of a heat transfer model for twin-screw extruders. Journal of Food Engineering, 11: 187-207.
37. Mottaz, J., Bruyas, L. 2001. Optimized thermal performance in extrusion. In: Guy, R., editor. Extrusion Cooking: Technology and Applications. CRC Press, Inc., Boca Raton, FL. pp. 51-82.
38. Levine, L., Rockwood, J., 1986. A correlation for heat transfer coefficients in food extruders. Biotechnology Progress, 2(2): 105-108.
39. Mohamed, I.O., Morgan, R.G., Ofoli, R.Y. 1988. Average convective heat transfer coefficient in singlescrew extrusion of non-Newtonian food materials. Biotechnology Progress, 4(2): 68-75.
40. Todd, D., 1988. Heat transfer in twin-screw extruders. Society of Plastic Engineers, ANTEC, 54-58.
41. White, J.L., Kim, E.K., Keum, J.M., Jung, H.C. 2001. Modeling heat transfer in screw extrusion with special application to modular self-wiping co-rotating twin-screw extrusion. Polymer Engineering and Science, 41(8): 1448-1455.
42. Maddock, B.H. 1959. A visual analysis of flow and mixing in extruder screws. Society of Plastic Engineers Journal, 15(5): 383-389.
43. Tadmor, Z., Klein, I. 1970. Engineering Principles of Plasticizing Extrusion. Van Nostrand-Reinhold, New York, NY. pp. 185-190.
44. Jepson, C.H. 1953. Future extrusion studies. Industrial and Engineering Chemistry, 45(5): 992.
45. Yacu, W.A. 1985. Modeling of a twin-screw co-rotating extruder. Journal of Food Engineering, 8: 1-21.
46. Tayeb, J., Vergnes, B., Della Valle, G. 1988. Theoretical computation of the isothermal flow through the reverse screw element of a twin-screw extrusion cooker. Journal of Food Science, 53(2): 616-625.
47. Bouvier, J.M., Fayard, G., Clayton, J.T. 1987. Flow rate and heat transfer modeling in extrusion cooking of soy protein. Journal of Food Engineering, 6: 123-141.
48. Mohamed, I.O., Ofoli, R.Y. 1990. Prediction of temperature profiles in twin screw extruders. Journal of Food Engineering, 12: 145-164.
49. Chiruvella, R.V., Jaluria, Y., Abib, A.H. 1995. Numerical simulation of fluid flow and heat transfer in a single-screw extruder with different dies. Polymer Engineering and Science, 35(3): 261-273.
50. Sastrohartono, T., Jaluria, Y. 1995. Numerical simulation of fluid flow and heat transfer in twin-screw extruders for non-Newtonian materials. Polymer Engineering and Science, 35(15): 1213-1221.
51. White, J.L., Bawiskar, S. 1998. Melting model for modular self wiping co-rotating twin screw extruders. Polymer Engineering and Science, 38(5): 727-740.
52. Vergnes, B., Della Valle, G., Delamare, L. A global computer software for polymer flows in corotating twin screw extruders. Polymer Engineering and Science, 38(11): 1781-1792.
53. Wang, L.J., Ganjyal, G.M., Jones, D.D., Weller, C.L., Hanna, M.A. 2004. Finite element modeling of fluid flow, heat transfer, and melting of biomaterials in a single-screw extrusion. Journal of Food Science, 69(5): E212-E223.
54. Chung, C.I. 1984. On the scale-up of plasticating extruder screws. Polymer Engineering and Science, 24(9): 626-632.
55. Rauwendaal, C. 1987. Scale-up of single screw extruders. Polymer Engineering and Science, 27(14): 1059-1068.
56. Ganzeveld, K.J., Janssen, L.P.B.M. 1990. Scale-up of counter-rotating closely intermeshing twin screw extruders without and with reactions. Polymer Engineering and Science, 30(23): 1529-1536.
57. Bigio, D., Wang, K. 1996. Scale-up rules for mixing in a non-intermeshing twin-screw extruder. Polymer Engineering and Science, 36(23): 2832-2839.
58. Sevatson, E., and Huber, G.R. 2000. Extruders in the food industry. In: Riaz, M.N., editor. Extruders in Food Applications. Technomic Publishing Company, Inc., Lancaster, PA. pp. 167-204.
59. Gray, D.R., Chinnaswamy, R. 1995. Role of extrusion in food processing. In: Gaonkar, A.G., editor. Food Processing: Recent Developments. Elsevier Science. London, UK. pp. 241-268.